CS Paper Radar

ECO-ID: Event-Camera based Optical System for Secure Multi-User Ultra-Low Latency Identification

Subham Sabud, Chengling Xu, Feng Ye

eess.SP cs.CRcs.ITcs.NIeess.SY ·submitted 2026-08-17 17:41 UTC · v1

Abstract

Time-critical interactive systems increasingly require ultra-low-latency device identification for multiple users, yet prevailing approaches such as passwords, QR codes, and RFID/NFC are constrained by human input, frame-based sensing, or near-contact range. This paper presents ECO-ID, an event-camera-based optical system for multi-user, ultra-low-latency identification over visible light communication (VLC). Leveraging microsecond-resolution, asynchronous observations of brightness transitions, ECO-ID employs a spatiotemporal coding design: disjoint LED subsets provide spatial separation among users, while user-specific timing delays encode identities without inter-user synchronization. The optical channel and event-driven sensing reduce full-scene capture relative to frame cameras and limit the RF attack surface, while enabling rapid token verification with freshness and replay protection. We implement a prototype and demonstrate that ECO-ID can practically achieve approximately 99.8\% localization and 98.7\% identification with 0.64 ms mean latency, while theoretically supporting identification at the scale of tens of concurrent users. Overall, ECO-ID provides a fast, privacy-conscious, and security-aware alternative for scalable multi-user identification in time-critical interactive environments.

Comment
6 pages, 5 figures, and 2 tables. Submitted to IEEE globecom

Closest papers

Nearest neighbours by meaning across the whole index.

ECO-COMM: An Ultra Low-Latency Event Camera based Optical Communication System

cs.NI ·2026-08-25 ·Chengling Xu, Keigo Hirakawa, Feng Ye
published similarity 0.70
Abstract · Conditionally accepted to appear ACM MobiHoc 2026

Ultralow-latency communication is critical for emerging next-generation applications such as XR, real-time control, and distributed sensing. We present ECO-COMM, an event-camera-based optical communication system for ultra-low-latency device association and lightweight information exchange. By exploiting the asynchronous sensing and microsecond-level temporal resolution of event cameras, ECO-COMM captures high-frequency optical signals without frame-based acquisition delays. We identify and analyze key hardware-induced challenges in event-camera communication, including timestamp inconsistency, readout contention, trailing effects, and the inevitable refractory period, and develop hardware-aware mitigation techniques to address them. Focusing on a single transmitter-receiver optical link, ECO-COMM establishes the feasibility of practical ultra-low-latency event-camera communication using commercially available hardware.A prototype implementation using an eight-LED transmitter and an off-the-shelf event camera achieves device association within 15 microseconds, symbol latency as low as 100 microseconds, and end-to-end latency below 8 milliseconds for 32-byte payloads at 0.1% bit error rate. ECO-COMM establishes a practical and complementary communication paradigm for ultra-low-latency systems where responsiveness and temporal precision are paramount.

0.44

Asynchronous Tracking, Optical Communication and 3D Motion Capture using Event-based Sensors

cs.RO cs.CV ·2026-10-03 ·Ziwei Wang, Angus Apps, Holly Battisson, Iain Guilliard, Timothy Molloy +1 more
similarity 0.60
Abstract · 16 pages, 17 figures

Inter-robot communication is a key enabling technology in cooperative robotics applications. While wireless communication is ubiquitous, simple, and effective, it has inherent limitations: the receiving robot cannot easily localise the source of an incoming signal, clock synchronisation is challenging, and signals are broadcast to all nearby devices rather than targeted recipients. Optical communication provides a complementary channel that is inherently directional and spatially localised, directly addressing these limitations. Event cameras are bio-inspired dynamic vision sensors that respond to changes in image intensity with high temporal resolution, high dynamic range, and low latency, making them well-suited as receivers for high-rate optical communication in cooperative robotic systems. In this paper, we propose the Asynchronous Tracking and Optical Communication (ATOC) system, which integrates LED smart-beacon modulation, event-based detection, optical tracking, and event-data demodulation in a single pipeline. By simultaneously tracking and demodulating multiple LED smart beacons, ATOC transforms a conventional visual marker into a robust communication channel suitable for a wide range of high-impact robotics applications. We validate ATOC in a suite of laboratory studies and two 'applications': a smart-city demonstration and a 3D motion-capture system.

0.19

Ternary Visible Light Communication Using Event-Based Vision Sensors

eess.IV eess.SP ·2026-09-29 ·Sotaro Kuremoto, Junya Hara, Hiroshi Higashi, Yuichi Tanaka
similarity 0.60
Abstract · Submitted to ICASSP 2027. 5 pages, 5 figures, 1 table

This paper proposes a ternary visible light communication method using an event-based vision sensor (EVS) and a liquid crystal display (LCD). The throughput of optical camera communication (OCC) is limited by the frame rates of conventional frame-based cameras, and EVSs are expected to overcome this limitation because their pixels asynchronously trigger events with polarity in response to brightness changes, with a temporal resolution on the order of microseconds. However, existing event-based OCC relies on binary signaling that uses only the presence or absence of events and leaves the polarity unused. The proposed method maps the three brightness transitions (increase, decrease, and no change) to ternary symbols, thereby increasing the information carried per symbol. At the transmitter, the LCD displays a marker in which the transmitted data are encoded; at the receiver, the EVS captures the marker and records the brightness changes as events with positive and negative polarities. To suppress errors caused by the timing mismatch between display updates at the transmitter and demodulation at the receiver, we also propose a demodulation algorithm based on frame-transition detection. Experimental results demonstrate that the proposed method achieves a throughput of 336.5 kbps, approximately 150% higher than that of its binary counterpart.

0.28

Real-Time Event-Based LED Tracking and Pose Estimation with PWM-Encoded Markers

cs.RO ·2026-11-05 ·Junkai Niu, Sheng Zhong, Delei Kong, Xin Wang, Kaizhen Sun +3 more
similarity 0.60
Abstract · This work has been submitted to the IEEE for possible publication

Event cameras are neuromorphic vision sensors with pixels that independently and asynchronously respond to brightness changes at microsecond resolution, supporting state estimation under rapid motion, motion blur, and high dynamic range (HDR) illumination. This also enables capture of high-frequency blinking patterns from light-emitting diodes (LEDs). Based on this, we propose a real-time event-based framework for LED tracking and six-degree-of-freedom (6-DoF) relative pose estimation using pulse-width modulation (PWM)-encoded LED markers. Multiple LEDs share a common blinking frequency and encode identities through distinct PWM duty cycles, reducing frequency-resource requirements and computational cost. Our dual-rate asynchronous tracking framework combines low-rate LED detection with high-rate raw-event updates, maintaining robust LED identity association and accurate pixel-level tracking under rapid motion. LED identities and positions establish reliable 2D-3D correspondences for real-time metric 6-DoF relative pose estimation. Extensive evaluations on a self-collected dataset demonstrate robustness under large motion flow and transient image-plane LED overlap. Furthermore, we develop a coordinated robotic platform comprising a quadrotor and a Mecanum-wheeled mobile robot, demonstrating the proposed framework's potential for closed-loop drone guidance through hovering and target-following experiments under time-varying HDR illumination, with onboard deployment on an NVIDIA Jetson Orin NX. The dataset and implementation will be released to facilitate further research.

0.36

Visible-Spectrum Optical Covert Channels in Commodity Smart Lighting

cs.CR ·2026-10-06 ·David Noever
similarity 0.59
Abstract

Smart light-emitting diode (LED) bulbs are networked devices that produce information-carrying output. This study asks whether that light can carry digital data through changes small enough to be difficult for a person in the room to notice. To explore this covert communication channel, we tested an unmodified smart bulb (Philips WiZ A19) using a camera as the receiver. Binary data were encoded programmatically in nearly matched color and brightness changes. Because the differences were deliberately small across 16 million color steps, the receiver periodically measured known reference states and used them to compensate for changes in the camera and background room illumination. The color method successfully transmitted the short message 'hi' using a color difference (E) of 0.5, a standard measure of perceptual color distance. The receiver recovered 99% of the transmitted bits, and the complete message passed an integrity check. The brightness method remained decodable at the smallest nonzero integer difference tested, alternating between dimming settings 56 and 54, with 96.2% mean bit accuracy across two runs. When both binary symbols were assigned to the same brightness in a control experiment, accuracy fell to approximately chance. These results show that the visible output of an ordinary smart bulb can serve as a low-rate data channel without hardware modification. Camera color drift can overwhelm small signals unless the receiver is recalibrated during transmission, sudden changes in ambient light can disrupt decoding, and longer messages require stronger error correction. The color experiment operated at a difference below a conventional threshold for human color discrimination. The corresponding perceptual limit for the brightness method has not yet been established experimentally.

0.26

EventHOI: Event-Driven Resource-Efficient Hand-Object Interaction Logging on Smartglasses

cs.DC cs.CVcs.HC ·2026-11-06 ·Le Zhang, Kailai Cui, Hao Chen, Vlad Roznyatovskiy, Jianzhong Zhang +3 more
benchmark similarity 0.58
Abstract · 15 pages, 21 figures, 3 tables

Hand-object interactions (HOIs) can be captured by smartglasses to learn how people manipulate objects in daily life. Automatic logging of these interactions from an egocentric perspective provides time-stamped evidence of daily actions for applications like memory assistance. However, continuous RGB capture and wireless transmission exceed the energy and bandwidth budgets of smartglasses. We present EventHOI, an event-driven sensing and compression system that couples selective RGB capture with HOI-aware encoding to enable egocentric logging over Bluetooth Low Energy (BLE) while preserving downstream HOI logging performance. Our key insight is to use low-power event sensing both to determine when RGB capture is needed and to identify where visual detail must be preserved. A lightweight IMU-based egomotion cancellation pipeline suppresses egomotion-induced events so that residual HOI motion can guide RGB triggering and spatial compression. We build a smartglasses prototype and conduct an end-to-end evaluation of EventHOI on a 50-hour egocentric benchmark with 97 subjects and a 20-hour real-world dataset we collect from 10 participants, together covering a broad range of daily-life scenarios and environments. Compared to RGB-only baselines, EventHOI reduces always-on backend power consumption by 5.8-10.4x and uplink bandwidth by 2.9x, with minimal HOI recognition accuracy loss. The resulting RGB uplink of less than 130 kbps fits within commodity BLE bandwidth budgets, making stable BLE video streaming feasible for egocentric HOI logging. Demo video and project website: https://eventhoi.github.io

0.35

When Reconstruction Helps Event-Camera Person Triggers

cs.CV ·2026-11-10 ·Yifan Shuai
similarity 0.58
Abstract · 10 pages, 3 figures, ancillary score tables and recomputation script

Event cameras record asynchronous changes in brightness. To use a general visual model as a recording trigger, a system must represent these measurements in a form the model can interpret. We compare direct grayscale accumulation, two temporal encodings, and two intensity reconstructors on paired real event data. On 192 windows from four held-out DSEC recordings, thresholds calibrated only on development data yielded 40 of 52 person detections and 12 of 140 background positives with E2VID. The strongest direct temporal encoding at an admissible fixed cutoff yielded 14 detections and seven background positives. A retrospective comparison at a common 10% background-positive cap yielded 40 detections for E2VID and at most 19 for any direct encoding. FireNet+ had lower preparation cost and produced 21 detections with zero observed background positives at its frozen cutoff. On the same 192 windows, Qwen3-VL-4B yielded 33/52, 2/140 with E2VID and 9/52, 9/140 with the highest-recall direct rendering, the three-bin image (person detections, background positives). A 96-second exploratory replay illustrates the sensitivity of episode capture and recording starts to cutoff selection. The experiments identify a detection benefit from reconstruction under controlled input history and distinguish it from the cost and false starts of continuous triggering.

0.32

Lights, Camera, Attack: Exploiting Temporal HDR Fusion with Pulsed Light

cs.CR ·2026-09-29 ·Alkim Domeke, Michael Kuhr, Roman Gilliatt, Mohammad Hamad, Sebastian Steinhorst +3 more
similarity 0.58
Abstract

Modern cameras widely use temporal High Dynamic Range (HDR) to improve visibility by capturing a sequence of exposures with different integration times and fusing them into a single image. This process implicitly assumes that scene illumination remains sufficiently stable during capture. We introduce FLASH (Fusion-Level Attack by Saturating HDR), an external pulsed-light attack that deliberately attacks this assumption by creating cross-exposure inconsistency before downstream perception. FLASH exploits an algorithmic assumption rather than relying on sensor damage or hardware failure, and requires neither physical camera access, access to raw exposure brackets, knowledge of the fusion algorithm, nor exact phase lock to the camera. Across eight physical camera platforms spanning embedded, surveillance, photography, smartphone, and automotive use cases, and matched optical controls, FLASH causes pipeline-dependent darkening, overexposure, and visibility loss. This includes extreme-darkening rates of 50.0% on an iPhone 16 Pro and 33.7% on a Wyze Battery Cam Pro. On the Wyze camera, FLASH triggers the system-level low-visibility response in 10/10 trials, compared with 0/10 continuous-light and randomized-frequency flashing controls. In a controlled stationary OpenPilot case study, 23.0% of frames exhibit severe darkening in the traffic-cone target region, with target-background CNR decreasing by up to 90.8%. Under FLASH, the OpenPilot interface also fails to display the system-level path state observed in the corresponding control trials. In a controlled night-only HDR reconstruction stress test, a proof-of-concept exposure-rejection defense reduces median output-brightness deviation by 79.16%. These results show that temporal HDR fusion itself requires security-aware validation of exposure evidence.

0.27