CS Paper Radar

Visible-Spectrum Optical Covert Channels in Commodity Smart Lighting

David Noever

cs.CR ·submitted 2026-10-06 02:32 UTC · v1

Abstract

Smart light-emitting diode (LED) bulbs are networked devices that produce information-carrying output. This study asks whether that light can carry digital data through changes small enough to be difficult for a person in the room to notice. To explore this covert communication channel, we tested an unmodified smart bulb (Philips WiZ A19) using a camera as the receiver. Binary data were encoded programmatically in nearly matched color and brightness changes. Because the differences were deliberately small across 16 million color steps, the receiver periodically measured known reference states and used them to compensate for changes in the camera and background room illumination. The color method successfully transmitted the short message 'hi' using a color difference (E) of 0.5, a standard measure of perceptual color distance. The receiver recovered 99% of the transmitted bits, and the complete message passed an integrity check. The brightness method remained decodable at the smallest nonzero integer difference tested, alternating between dimming settings 56 and 54, with 96.2% mean bit accuracy across two runs. When both binary symbols were assigned to the same brightness in a control experiment, accuracy fell to approximately chance. These results show that the visible output of an ordinary smart bulb can serve as a low-rate data channel without hardware modification. Camera color drift can overwhelm small signals unless the receiver is recalibrated during transmission, sudden changes in ambient light can disrupt decoding, and longer messages require stronger error correction. The color experiment operated at a difference below a conventional threshold for human color discrimination. The corresponding perceptual limit for the brightness method has not yet been established experimentally.

Closest papers

Nearest neighbours by meaning across the whole index.

ECO-ID: Event-Camera based Optical System for Secure Multi-User Ultra-Low Latency Identification

eess.SP cs.CRcs.ITcs.NI+1 ·2026-08-17 ·Subham Sabud, Chengling Xu, Feng Ye
similarity 0.59
Abstract · 6 pages, 5 figures, and 2 tables. Submitted to IEEE globecom

Time-critical interactive systems increasingly require ultra-low-latency device identification for multiple users, yet prevailing approaches such as passwords, QR codes, and RFID/NFC are constrained by human input, frame-based sensing, or near-contact range. This paper presents ECO-ID, an event-camera-based optical system for multi-user, ultra-low-latency identification over visible light communication (VLC). Leveraging microsecond-resolution, asynchronous observations of brightness transitions, ECO-ID employs a spatiotemporal coding design: disjoint LED subsets provide spatial separation among users, while user-specific timing delays encode identities without inter-user synchronization. The optical channel and event-driven sensing reduce full-scene capture relative to frame cameras and limit the RF attack surface, while enabling rapid token verification with freshness and replay protection. We implement a prototype and demonstrate that ECO-ID can practically achieve approximately 99.8\% localization and 98.7\% identification with 0.64 ms mean latency, while theoretically supporting identification at the scale of tens of concurrent users. Overall, ECO-ID provides a fast, privacy-conscious, and security-aware alternative for scalable multi-user identification in time-critical interactive environments.

0.29

Ternary Visible Light Communication Using Event-Based Vision Sensors

eess.IV eess.SP ·2026-09-29 ·Sotaro Kuremoto, Junya Hara, Hiroshi Higashi, Yuichi Tanaka
similarity 0.54
Abstract · Submitted to ICASSP 2027. 5 pages, 5 figures, 1 table

This paper proposes a ternary visible light communication method using an event-based vision sensor (EVS) and a liquid crystal display (LCD). The throughput of optical camera communication (OCC) is limited by the frame rates of conventional frame-based cameras, and EVSs are expected to overcome this limitation because their pixels asynchronously trigger events with polarity in response to brightness changes, with a temporal resolution on the order of microseconds. However, existing event-based OCC relies on binary signaling that uses only the presence or absence of events and leaves the polarity unused. The proposed method maps the three brightness transitions (increase, decrease, and no change) to ternary symbols, thereby increasing the information carried per symbol. At the transmitter, the LCD displays a marker in which the transmitted data are encoded; at the receiver, the EVS captures the marker and records the brightness changes as events with positive and negative polarities. To suppress errors caused by the timing mismatch between display updates at the transmitter and demodulation at the receiver, we also propose a demodulation algorithm based on frame-transition detection. Experimental results demonstrate that the proposed method achieves a throughput of 336.5 kbps, approximately 150% higher than that of its binary counterpart.

0.28

Beyond CCT: Multi-channel SPD recovery for per-shot camera color correction

cs.CV ·2026-10-29 ·Shuwei Yue, Hongke Wei, Qiao Chen
benchmark similarity 0.53
Abstract

Modern cameras correct color via two or three pre-calibrated 3x3 matrices interpolated by Correlated Color Temperature (CCT). This collapses the illuminant SPD to a scalar. LEDs, fluorescents, and mixed sources sit off the Planckian locus, and metameric illuminants with the same chromaticity demand different optimal CCMs that a CCT pipeline cannot distinguish. We recover the illuminant SPD instead using non-negative least squares against a basis dictionary, conditioned on the camera white point and a multi-channel ambient-light sensor (ALS). A closed-form 3x3 CCM is then fit per shot. On a synthetic benchmark of 300 illuminants and 3,100 reflectances, mean angular error drops from 1.89 to 1.20 degrees, with a 1.7x tail reduction on the LED-like off-Planckian group (n=45) where metameric ambiguity is tangible. The gain holds under realistic ALS imperfections and observation noise, and the same off-Planckian advantage carries over to 1,684 real measured SPDs.

0.25

Stabilizing Illumination Conditioning in SSM-Based Low-Light Image Enhancement with Bottleneck Prompt Sidecars

eess.IV cs.CV ·2026-10-16 ·Wei Chen Ng, Qiyi Xie, Jian Ding Tan, Yan Kang Lee, Abdulrab Hakim Qaid Abdullah +1 more
similarity 0.51
Abstract

Low-light image enhancement (LLIE) requires more than brightness amplification because real low-light images often exhibit spatially varying illumination, amplified noise, color distortion, and local detail loss. Recent SSM- and Mamba-based restorers provide efficient long-range modeling, yet the route for introducing illumination priors into such backbones remains insufficiently studied. This study addresses safe illumination conditioning for SSM-based LLIE through a bottleneck-side PromptAdapter. A lightweight illumination estimator first predicts a single-channel illumination map, which is then converted into prompt tokens and injected through a residual sidecar adapter at the bottleneck, thereby avoiding direct modification of the state-space core. Under a locked three-seed evaluation protocol on LOL-v1, LOLv2-Real, and LOLv2-Synthetic, the PromptAdapter improves over the Base model by 0.94 dB, 1.24 dB, and 0.93 dB in PSNR, respectively, while also improving SSIM, LPIPS, and masked dark-region metrics. The clearest real-data evidence appears on LOLv2-Real. A Learned-Fixed control on LOL-v1 indicates that the present results support the utility of the sidecar conditioning pathway more strongly than a strict claim of illumination-conditioned superiority, and the LOLv2-Synthetic result remains stability-conditioned. These findings suggest that, in SSM-based LLIE, conditioning design can be as important as the conditioning signal itself.

0.25

Color wave: A systematic evaluation of active screen illumination for injection attack detection in remote face authentication

cs.CV ·2026-11-09 ·Daniyar Kurmankhojayev, Elmurat Nigmatov, Dmitrii Gordin, Andrei Shadrikov, Mikhail Shkorin +2 more
similarity 0.51
Abstract

Remote face authentication requires protection against both presentation attacks and biometric data injection attacks prior to face matching. Methods based on active screen illumination appear promising for both by introducing randomized visual stimuli through the user's device screen and evaluating the corresponding facial responses. Although such methods have been more studied for presentation attack detection (PAD), their systematic evaluation for injection attack detection (IAD) remains limited. To address this gap, we first classify injected content into static images, prerecorded videos, and real-time deepfakes based on their expected responses to the challenge. We then adapt an active screen-illumination approach into an implementation we term color wave and develop a systematic, injection-specific evaluation protocol. The protocol examines detection effectiveness, generalization across operating conditions, robustness to signal degradation, and susceptibility to selected evasion strategies. The findings demonstrate a strong discriminative signal under controlled conditions but also reveal performance limitations under overexposure, low screen brightness, and subject motion, as well as vulnerabilities to selected evasion strategies. By relating detection outcomes to attack types and operating conditions, this study provides an interpretable assessment of when and why active screen illumination succeeds or fails as an IAD mechanism.

0.21

Lights, Camera, Attack: Exploiting Temporal HDR Fusion with Pulsed Light

cs.CR ·2026-09-29 ·Alkim Domeke, Michael Kuhr, Roman Gilliatt, Mohammad Hamad, Sebastian Steinhorst +3 more
similarity 0.51
Abstract

Modern cameras widely use temporal High Dynamic Range (HDR) to improve visibility by capturing a sequence of exposures with different integration times and fusing them into a single image. This process implicitly assumes that scene illumination remains sufficiently stable during capture. We introduce FLASH (Fusion-Level Attack by Saturating HDR), an external pulsed-light attack that deliberately attacks this assumption by creating cross-exposure inconsistency before downstream perception. FLASH exploits an algorithmic assumption rather than relying on sensor damage or hardware failure, and requires neither physical camera access, access to raw exposure brackets, knowledge of the fusion algorithm, nor exact phase lock to the camera. Across eight physical camera platforms spanning embedded, surveillance, photography, smartphone, and automotive use cases, and matched optical controls, FLASH causes pipeline-dependent darkening, overexposure, and visibility loss. This includes extreme-darkening rates of 50.0% on an iPhone 16 Pro and 33.7% on a Wyze Battery Cam Pro. On the Wyze camera, FLASH triggers the system-level low-visibility response in 10/10 trials, compared with 0/10 continuous-light and randomized-frequency flashing controls. In a controlled stationary OpenPilot case study, 23.0% of frames exhibit severe darkening in the traffic-cone target region, with target-background CNR decreasing by up to 90.8%. Under FLASH, the OpenPilot interface also fails to display the system-level path state observed in the corresponding control trials. In a controlled night-only HDR reconstruction stress test, a proof-of-concept exposure-rejection defense reduces median output-brightness deviation by 79.16%. These results show that temporal HDR fusion itself requires security-aware validation of exposure evidence.

0.27

An Eternal Irradiance Camera

cs.CV ·2026-09-19 ·Jeremy Klotz, Shree K. Nayar
top venueunusual similarity 0.49
Abstract · 18 pages, 18 figures. SIGGRAPH Asia '26

A conventional camera uses millions of pixels to measure radiance from all directions within its field of view. We present an omnidirectional irradiance camera that measures the irradiance function---the illumination incident upon every point on a sphere. The irradiance function varies smoothly over the sphere and hence is bandlimited. We have analyzed this function in the frequency domain and have shown that it is well approximated by a weighted sum of the first seven degrees of spherical harmonics. As a result, the irradiance function can be accurately reconstructed from a small number of samples. This implies that an irradiance camera does not need millions of detectors (pixels)---just a handful of measurements suffice. This brings two major benefits. First, the camera consumes such little energy that it can be completely powered by the light falling on its detectors. Second, it does not capture the visual details needed to identify an individual, and hence privacy is preserved. We have built a prototype irradiance camera, called FluxCam, using 49 detectors arranged on the surface of a sphere. In a well-lit indoor environment, FluxCam can read out and wirelessly transmit its measurements at 30 frames per second using energy harvested from the light falling on it (i.e., without a battery, cable, or external power supply). We show how FluxCam can be used as an optical gyroscope for computing rotation, to monitor a workspace, as an untethered light probe for diffuse relighting, and as an omnidirectional pyranometer for estimating sky conditions and determining the best orientation of a solar panel.

0.52

When is a closed-form RGB->S/P ratio adequate? A hyperspectral characterization on natural scenes for mesopic display

eess.IV cs.CVcs.GR ·2026-09-21 ·Naoyuki Uchida
unusual similarity 0.48
Abstract · 14 pages, 5 figures, 2 tables

Mesopic and low-light display transforms require, as their driving signal, a per-pixel scotopic-to-photopic luminance ratio (S/P); the exact spectral S/P is unavailable for ordinary RGB content, so a low-cost closed form that estimates S/P from a linear-RGB triplet is used in its place. Such closed forms exist but have been characterized only on narrowband / LED sources, i.e. spectrally sparse spectra, where a relative error of ~41% has been reported for a three-channel projection. Display content, however, is natural and broadband. We ask whether the same closed form is adequate there, using per-pixel spectral S/P from hyperspectral imagery as ground truth. On a daylight radiance time-series, a six-scalar closed form (three photopic and three scotopic channel weights) reproduces spectral S/P with a median error of ~0.07 that is time-invariant once the RGB input is chromatically adapted to D65; evaluated in un-adapted sRGB the error instead carries a color-temperature tilt across illuminants (~0.19), so adaptation is the enabling step for this use case. The result generalizes to an independent fifty-scene set (pooled median 0.024; 45/50 scenes within a pre-registered 0.10 band), with the few exceedances concentrated in saturated, spectrally-peaky surfaces that approach the narrowband regime (floral close-ups in this set). The scotopic weight vector is shown to be primary-model dependent, but the value used here is corroborated by a primary-free XYZ projection, and the median error stays within the band across all principled coefficient choices. We do not claim observer-validated appearance fidelity or adequacy on narrowband sources; both are out of scope. Both outcomes follow from the same three-channel projection: it is overwhelmed by spectrally sparse inputs and adequate on spectrally smooth ones.

0.30