CS Paper Radar

Lights, Camera, Attack: Exploiting Temporal HDR Fusion with Pulsed Light

Alkim Domeke, Michael Kuhr, Roman Gilliatt, Mohammad Hamad, Sebastian Steinhorst, Bing Li, Long Cheng, Mert D. Pesé

cs.CR ·submitted 2026-09-29 14:56 UTC · v1

Abstract

Modern cameras widely use temporal High Dynamic Range (HDR) to improve visibility by capturing a sequence of exposures with different integration times and fusing them into a single image. This process implicitly assumes that scene illumination remains sufficiently stable during capture. We introduce FLASH (Fusion-Level Attack by Saturating HDR), an external pulsed-light attack that deliberately attacks this assumption by creating cross-exposure inconsistency before downstream perception. FLASH exploits an algorithmic assumption rather than relying on sensor damage or hardware failure, and requires neither physical camera access, access to raw exposure brackets, knowledge of the fusion algorithm, nor exact phase lock to the camera. Across eight physical camera platforms spanning embedded, surveillance, photography, smartphone, and automotive use cases, and matched optical controls, FLASH causes pipeline-dependent darkening, overexposure, and visibility loss. This includes extreme-darkening rates of 50.0% on an iPhone 16 Pro and 33.7% on a Wyze Battery Cam Pro. On the Wyze camera, FLASH triggers the system-level low-visibility response in 10/10 trials, compared with 0/10 continuous-light and randomized-frequency flashing controls. In a controlled stationary OpenPilot case study, 23.0% of frames exhibit severe darkening in the traffic-cone target region, with target-background CNR decreasing by up to 90.8%. Under FLASH, the OpenPilot interface also fails to display the system-level path state observed in the corresponding control trials. In a controlled night-only HDR reconstruction stress test, a proof-of-concept exposure-rejection defense reduces median output-brightness deviation by 79.16%. These results show that temporal HDR fusion itself requires security-aware validation of exposure evidence.

Closest papers

Nearest neighbours by meaning across the whole index.

High Dynamic Range Video Reconstruction from Single-Exposure Raw Sequences

cs.CV ·2026-09-23 ·Tao Zhang, Peixian Su, Xingyu Gao, Yunhao Zou, Yu Lu +4 more
datasetcode/data similarity 0.61
Abstract · 12 pages. Code: https://github.com/supeixian/RawHDRV

Due to the limited dynamic range of conventional image sensors, captured low dynamic range (LDR) video often suffers from highlight clipping and shadow detail loss, making high-quality high dynamic range (HDR) reconstruction from single-exposure sequences highly challenging without alternating exposures or extra hardware. Alternating-exposure HDR methods sacrifice frame rate and struggle with motion alignment, making them impractical for real-world capture. To address this, we propose RawHDRV, an end-to-end framework for single-exposure Raw video HDR reconstruction, that fundamentally exploits the linear response and channel-specific characteristics of Bayer data. Specifically, it features a channel-decomposition temporal alignment and fusion strategy that processes Bayer channels separately to exploit their distinct exposure characteristics, together with exposure-aware weighted fusion. It further incorporates an exposure complementarity mask-guided restoration module that leverages inter-frame exposure redundancy to adaptively fuse reliable information and suppress saturation artifacts, and introduces a mask-guided color loss that combines normalized error constraints with gradient smoothing to enhance highlight recovery. Furthermore, we construct a large-scale mobile Raw-HDR video dataset with per-frame HDR annotations. Experiments show that our method achieves the state-of-the-art results in all metrics, demonstrating superior spatial quality and temporal stability under extreme exposure conditions. The code is available at https://github.com/supeixian/RawHDRV.

0.34

HIVE-Diff: High Frame Rate HDR Video Reconstruction from a Single LDR Frame and Events

eess.IV cs.CV ·2026-11-02 ·Caixin Wang, Qingrui Wang, Jie Zhang, Ralph Etienne-Cummings
publishedcode/data similarity 0.60
Abstract · Accepted to WACV 2027 (Applications Track). 8 pages main paper + 8 pages supplementary material (included as appendix), 12 figures, 5 tables…

High frame rate HDR video is important in applications such as autonomous driving and scientific imaging, where rapid motion and extreme illumination often occur simultaneously. Conventional frame cameras face a trade-off between temporal resolution and dynamic range, while event cameras provide complementary high-speed brightness-change measurements over a wide illumination range. These properties have motivated event-based HDR reconstruction, with existing methods broadly following event-only and hybrid event-frame paradigms. Event-only HDR reconstruction, however, suffers from brightness and color drift due to the lack of absolute intensity references. Hybrid event-frame methods alleviate this ambiguity using low-dynamic-range (LDR) frames as anchors, but most perform one-to-one HDR reconstruction at available LDR timestamps. In this work, we investigate single-reference HDR temporal expansion, reconstructing N HDR frames from one LDR reference and events instead of N aligned LDR observations. We develop HIVE-Diff, an event-conditioned video diffusion framework that decomposes the task into event-guided temporal generation and HDR content completion. Because paired real HDR-event data are scarce, we train on synthetic data and adapt the model to real event domains using LDR-event sequences as proxy supervision with teacher-student distillation. Experiments on synthetic and multiple real-world datasets demonstrate strong reconstruction quality and robust real-data adaptation.

0.48

Event-based object detection under adverse lighting and motion: lessons for construction sites

cs.CV ·2026-11-15 ·Zhuoran Feng, Xiaoshan Zhou
similarity 0.59
Abstract · 15 pages, 12 figures, 9 tables

Vision-based monitoring on construction sites fails at night, at dawn and dusk, in tunnels and under floodlights, when conventional RGB cameras under- or over-expose. Event cameras record per-pixel brightness changes with microsecond latency and over 120 dB of dynamic range, but their benefit for site-relevant object detection has not been quantified on real data. We compare three recent event-based detectors (SMamba, SATE and EvRT-DETR) with an RGB detector trained on the same data, using the pixel-aligned PEOD dataset. On low-light frames (70% of the test set) the best event detector reaches 27.2 AP against 21.3 AP for RGB, and a training-free late fusion of both sensors is the best option in every lighting condition (33.3 AP). An object-level analysis of 53,091 objects shows that brightness has little effect on event detectors, whereas fast motion matters: above 20 pixels per frame RGB finds 11-19% of medium-size objects and EvRT-DETR 39-60%. Activation patching locates the damage caused by losing events at the 1/16-resolution features, with small objects depending on the finest scale, and shows that event detectors fail when few signal events meet added noise. A model-agnostic pruning study keeps about 95% of accuracy with 60% of the input but halves small-object recall. On rendered construction sites, used zero-shot, dimming the floodlights drops RGB to near zero while the event detector keeps most of its AP50. We close with camera-placement guidance for construction sites.

0.30

NTIRE 2026 Low-light Enhancement: Twilight Cowboy Challenge

cs.CV ·2026-08-10 ·Aleksei Khalin, Egor Ershov, Artyom Panshin, Sergey Korchagin, Georgiy Lobarev +44 more
surveyhighly cited similarity 0.59
Abstract · 11 pages, 6 figures, 1 table

This paper presents a review of the NTIRE 2026 Low-light Enhancement: Twilight Cowboy Challenge. The objective of the competition was to merge a set of misaligned smartphone images in the raw domain, captured in low-light conditions, into a single, clean image. Introduced setup simultaneously addresses two problems of low-light photography: visual degradations such as high noise and mixed scene illuminants, and the geometric inconsistencies caused by hand movement during multi-frame capture. To advance research in low-light and nighttime computational photography, a challenging dataset was collected comprising 585 real-world scenes, spanning indoor low-light and outdoor nighttime conditions, for training and benchmarking participant solutions. The competition employed a three-stage evaluation protocol: automatic validation via the CodaBench platform in stages one and two, followed by blind assessment on a private test set for the final ranking. Ten teams surpassed the established baseline, achieving improvements of up to +6.49 dB in PSNR and +0.0101 in SSIM, thereby establishing new state-of-the-art performance for burst-based low-light image enhancement. These results demonstrate significant progress in handling real-world noise, motion, and illumination variability in the low-light setting. Comprehensive results, leaderboards, and additional information are publicly available at https://nightimaging.org.

0.62

Pixel-wise Exposure for Highly Robust In-Vehicle Remote-PPG

cs.CV ·2026-09-29 ·Jieying Wang, Xinqi Cai, Caifeng Shan, Wenjin Wang
similarity 0.58
Abstract

Remote photoplethysmography (rPPG) offers a promising non-contact solution for heart rate monitoring, yet its real-world robustness is fundamentally limited by an inherent hardware limitation: existing camera exposure control paradigms, whether fixed or auto-exposure, impose a uniform exposure time across all pixels within a frame. In high-dynamic-range scenes such as automotive cabins with strong directional sunlight, this spatially invariant exposure constraint inevitably leads to localized facial overexposure or underexposure, irreversibly corrupting the subtle pulsatile signals essential for rPPG at the point of capture, a physical degradation that no downstream algorithm can recover. To overcome this bottleneck, we propose PixExpo (Pixel-wise Exposure), a "temporal-for-spatial" framework that sequentially captures frames under a predefined cyclic exposure schedule and performs non-iterative pixel-wise fusion. At each pixel location, PixExpo selects the observation closest to an rPPG-motivated target intensity. This criterion seeks to reduce local saturation and severe underexposure rather than optimize perceptual appearance. PixExpo requires no sensor modification but assumes programmable frame-level exposure control. We validate the proposed PixExpo framework using our newly introduced MEX-Drive dataset, comprising 48 participants under real-world driving conditions. Experimental results demonstrate that PixExpo outperforms manufacture-default auto-exposure methods, reducing the mean absolute error (MAE) by 7.21 bpm (from 13.94 to 6.73 bpm) and increasing the success rate by 37.29 percentage points (from 25.95% to 63.24%) across challenging driving scenarios.

0.21

Casual Flash Lighting for Gaussian Splat Inverse Rendering

cs.CV ·2026-10-05 ·Jiamin Xu, Dongheng Wei, Jiarong Zhao, Qi Wang, James Tompkin +2 more
similarity 0.58
Abstract

Recovering geometry, materials, and lighting from photographs is highly ambiguous when only static illumination is available. Active-lighting setups reduce the ambiguity but require dark rooms or specialized hardware. Instead, we synergize both static and flash lighting from casual indoor capture, with the flash on or off, each from independent viewpoints. The flash residual constrains albedo and the BRDF, while static lighting captures grazing-angle specular highlights that flash misses. With a 2DGS reconstruction framing, our key contribution is a GS-anchored diffuse field: a hash-encoded MLP is queried at the rasterized 2DGS depth. As it depends only on world position, it is view consistent in 3D and allows the flash residual to drive material decomposition instead of being absorbed by alpha-blending drift across views. At the same time, we render static lighting with deferred shading such that it can also supervise material decomposition. On five synthetic and three real indoor scenes, our method outperforms six recent baselines on diffuse color, albedo and roughness material parameters, and in relighting where PSNR improves by 4.17 dB over the next-best baseline.

0.21

ECO-ID: Event-Camera based Optical System for Secure Multi-User Ultra-Low Latency Identification

eess.SP cs.CRcs.ITcs.NI+1 ·2026-08-17 ·Subham Sabud, Chengling Xu, Feng Ye
similarity 0.58
Abstract · 6 pages, 5 figures, and 2 tables. Submitted to IEEE globecom

Time-critical interactive systems increasingly require ultra-low-latency device identification for multiple users, yet prevailing approaches such as passwords, QR codes, and RFID/NFC are constrained by human input, frame-based sensing, or near-contact range. This paper presents ECO-ID, an event-camera-based optical system for multi-user, ultra-low-latency identification over visible light communication (VLC). Leveraging microsecond-resolution, asynchronous observations of brightness transitions, ECO-ID employs a spatiotemporal coding design: disjoint LED subsets provide spatial separation among users, while user-specific timing delays encode identities without inter-user synchronization. The optical channel and event-driven sensing reduce full-scene capture relative to frame cameras and limit the RF attack surface, while enabling rapid token verification with freshness and replay protection. We implement a prototype and demonstrate that ECO-ID can practically achieve approximately 99.8\% localization and 98.7\% identification with 0.64 ms mean latency, while theoretically supporting identification at the scale of tens of concurrent users. Overall, ECO-ID provides a fast, privacy-conscious, and security-aware alternative for scalable multi-user identification in time-critical interactive environments.

0.29

Neural Block-wise Auto-exposure for Single-Shot High Dynamic Range Imaging

cs.CV ·2026-10-09 ·Zhengguo Li, Chaobing Zheng, Wei Wang
similarity 0.57
Abstract · High dynamic rang imaging, Single-shot, Block-wise, Auto-exposure, Neural network

Block-wise varying exposures are effective for cap- turing appearance of a real-world high dynamic range (HDR) scene via a single-shot. However, brightness order reversal (BOR) artifacts, blocking artifacts and loss of details in highlight/shadow regions are possible issues for block-wise varying exposures. In this paper, a novel neural block-wise auto-exposure algorithm is proposed to address the issues. The proposed algorithm maps a temporary image and its exposure time to the exposure times of all non-overlapping 16 X 16 blocks. The temporary image can be either an sRGB or a raw image. Although the sRGB image is widely adopted in existing auto-exposure algorithms, exposure times of blocks in the highlight and shadow regions might not be accurately learned due to the limited radiance measurement capability of the sRGB image. This paper thus also explores the feasibility of temporary image as a raw image. Due to the better radiance measurement capability of the raw image, the exposure times of blocks are learned more accurately, and more details in the highlight/shadow regions of the real-world HDR scene are captured by the resultant HDR imaging system. Experiment results validate the proposed neural block-wise auto-exposure algorithm.

0.21