CS Paper Radar

Multi-Observer Vehicle Localization Case Study with Roadside Radar and Connected Vehicle Sensing

Aleksi Pippuri, Nilusha Jayawickrama, Risto Ojala

cs.CV cs.RO ·submitted 2026-08-17 07:37 UTC · v1
datasetcode/data

Abstract

In modern intelligent transportation systems, it is essential to accurately estimate vehicle positions, especially in mixed traffic conditions where both connected and conventional vehicles coexist. Roadside infrastructure and connected vehicles can provide complementary observations of the same traffic scene, but real-world evidence on decision-level fusion between these sources remains limited. This paper proposes a multi-observer vehicle localization framework that fuses compact object-level detections from a static roadside radar and a dynamic LiDAR-equipped connected vehicle. We evaluate the framework with real-world data collected at an urban intersection in Helsinki, Finland, with a separately instrumented target vehicle used as the reference trajectory. Two extended Kalman filter based strategies for the localization task were benchmarked. The performance of the radar and LiDAR sensors were evaluated separately, and the two fusion strategies were explored under nominal sensing conditions, reduced LiDAR update rates, simulated LiDAR occlusions, and different target-vehicle motion states. The results show that, under full LiDAR availability, fusion performance is dominated by the LiDAR observations, while the less accurate and less consistent radar observations provide only limited additional improvement. Nevertheless, AEKF achieves small gains over the LiDAR-only baseline, and object-level connected vehicle observations remain useful when shared at reduced update rates. These findings indicate that decision-level fusion provides scenario-dependent benefits rather than automatic improvement over a strong single-sensor baseline. We release the dataset and implementation on Github to support further research: https://github.com/AppuriAalto/multi-observer-vehicle-tracking

Comment
12 pages, 7 figures and 8 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Online Target-less Radar-LiDAR-Camera Extrinsic Calibration via Joint Optimization

cs.RO ·2026-10-03 ·Gunhee Shin, Yunsoo Kim, Chanhyuk Lee, Wanhee Kim, Minwoo Lee +5 more
published similarity 0.66
Abstract · 6 pages, 2 figures, 3 tables. Accepted to the International Conference on Control, Automation and Systems (ICCAS 2026)

Fusing radar, LiDAR, and camera enables robust perception in diverse and adverse conditions, but the fusion performance critically depends on accurate extrinsic calibration among the three sensors. In this paper, we address the problem of online target-less extrinsic calibration for the radar-LiDAR-camera system. Existing target-less methods are mostly designed for a single sensor pair, and composing the pairwise results does not guarantee consistency across the three sensors. Moreover, the sparse and noisy radar measurements make the radar-involving pairs unreliable. To tackle these challenges, we propose a joint calibration framework that constructs residuals for each sensor pair and optimizes the extrinsics of all pairs together to minimize the overall residual. Furthermore, we introduce an adaptive radar noise filter that rejects spurious radar returns using a range-dependent margin, and a correspondence accumulation strategy that aggregates sparse radar correspondences over frames. We validate our method on an in-house radar-LiDAR-camera dataset covering diverse urban environments, where it reduces calibration errors across all sensor pairs over a state-of-the-art camera-LiDAR baseline.

0.23

CLOCs-R: Radar-Assisted Camera-LiDAR Fusion for Long-Range Object Detection

cs.CV ·2026-11-03 ·Richard Beuck, John Nguyen, Sudip Dhakal
hot direction similarity 0.66
Abstract

Long-range 3D object detection remains difficult for autonomous vehicles because LiDAR returns become sparse and camera evidence weakens with distance, while automotive radar keeps returning measurements far beyond both. We present CLOCs-R, an extension of the CLOCs candidate-level fusion framework that adds radar evidence to camera-LiDAR rescoring. Radar returns are accumulated over several sweeps, compensated for ego-motion, and associated with each pre-NMS 3D candidate through a range-dependent gate. Compact features summarizing support, Doppler speed and spread, range residual, and offset are then appended to every camera-LiDAR pair before a lightweight fusion network rescores the candidates. We first verify that our fusion implementation reproduces CLOCs on KITTI. We then evaluate on the daytime clear-weather subset of the aiMotive dataset, reporting distance-binned metrics out to 200 m with frozen SECOND and Cascade R-CNN detectors. Camera-LiDAR CLOCs improves on SECOND up to 50 m but degrades beyond it. A residual scoring variant, introduced post hoc, corrects SECOND's score instead of replacing it and recovers most of this loss. Radar consistently improves BEV AP at 30-50 m (0.857 to 0.870), but beyond 50 m its gain is small (+0.003 center-distance AP), within seed variation, and CLOCs-R with residual scoring is statistically tied with LiDAR-only SECOND. Our analysis attributes the limited long-range benefit to weak separation of true and false detections by radar features, scarce far-range training positives, poor camera evidence at distance, and missing LiDAR proposals that rescoring cannot recover. We report all as-designed and post hoc results side by side.

0.22

A Multi-Modal Perception Pipeline for Object Detection and Tracking in Autonomous Racing

cs.RO cs.AI ·2026-09-08 ·Davide Malvezzi, Michele Pestarino, Vittoria Cavicchioli, Valentina La Gamba, Silvia Severi +7 more
hot direction similarity 0.66
Abstract · 8 pages, 6 figures, ITSC 2026, Invited Session

Object detection and tracking are fundamental components of perception systems for autonomous driving. Achieving robust performance under adverse conditions such as limited visibility, sensor noise, and failures remains an open challenge, particularly in autonomous racing, where vehicles operate at very high speeds, experience strong vibrations, and interact under small safety margins. This paper presents a multi-modal late-fusion perception pipeline for object detection and tracking in the autonomous racing domain. The proposed system extends previous work by exploiting all onboard sensors through a late-fusion approach and a dedicated multi-object tracking framework. Independent detections from cameras, LiDARs, and RADARs are combined to provide timely and robust state estimates of surrounding vehicles. The tracking method explicitly compensates for detection delays and embeds in its model prior knowledge of vehicle dynamics and track layout. Experimental evaluation on real-world data across diverse critical scenarios, representative of challenging edge cases also in urban driving, confirms the effectiveness of the proposed pipeline and its suitability to support safe and adaptive planning decisions.

0.32

A Systematic Evaluation of Infrastructure-Based Radar System for Highway Traffic Monitoring

cs.CV ·2026-09-22 ·Tianheng Zhu, Woei-chyi Chang, Alamss Riaz, Sogand Hasanzadeh, Yiheng Feng
publishedcode/data similarity 0.65
Abstract · Accepted by IEEE ITSC 2026. Compared with the accepted version, this version includes an expanded trajectory tracking analysis with addition…

Infrastructure-based radar systems offer robust and long-range solutions for traffic monitoring, yet their detection and tracking performance under real-world conditions remains insufficiently evaluated. This study introduces DRaT (Drone and Radar Trajectories), a dual-modality dataset of naturalistic vehicle trajectories collected at a highway merging segment in Fort Worth, Texas, to systematically assess radar sensing performance against drone-derived ground truth. The performance is evaluated at three levels: individual vehicle detection, trajectory tracking, and macroscopic traffic parameter estimation. For individual vehicle detection, the radar achieves an overall precision of 78% and a recall of 57%, with degraded performance under congested traffic conditions and at longer distances. At the trajectory level, the radar demonstrates reasonably strong tracking performance (IDF1 = 0.699), maintaining reliable vehicle identities when tracks are successfully established. For macroscopic traffic flow metrics, the radar accurately estimates space-mean speed (MAPE < 4%) but underestimates density and volume by approximately 23% due to missed detections. The paper also discusses practical deployment considerations and potential downstream applications of roadside radar sensing systems. To support reproducible research on infrastructure-based sensing systems, we have open-sourced the DRaT dataset on Zenodo: https://zenodo.org/records/20171110.

0.66

Do Spinning Radar Doppler Velocity Measurements Improve Vehicle Detection and Tracking?

cs.RO cs.CVeess.SP ·2026-09-17 ·Eric Xie, Daniil Lisus, Timothy D. Barfoot
similarity 0.64
Abstract · 8 pages, 8 figures

Spinning frequency-modulated continuous-wave (FMCW) radars have been gaining popularity in autonomous vehicle perception on account of their robustness to adverse weather conditions and 360° field of view. Recently, scanning radars have also been shown capable of generating per-azimuth Doppler velocity. In this paper, we investigate whether these Doppler velocity measurements improve spinning radar vehicle detection and tracking performance. For detection, we estimate the ego motion and use it to undo the Doppler range distortion of the radar image before passing it to a network. For tracking, we propose a new way to estimate a per-vehicle velocity and use it as a prior for the tracker's motion model. Since Doppler-enabled spinning radar data is not available in any dataset with ground-truth dynamic object labels, our first contribution is an automatic labelling pipeline that uses an ensemble of fine-tuned off-the-shelf lidar detectors to label all 643 km of the Boreas Road Trip dataset. We then transfer detections to radar, and use over 250 km of vehicle-dense sequences as ground-truth training data. By training and evaluating two state-of-the-art detectors, we show that Doppler undistortion can improve detection accuracy by up to $2.37$ points on mean average precision. Furthermore, we show that the Doppler velocity prior can improve tracking accuracy by $13.68$ points on multi-object tracking accuracy (MOTA) versus the zero-velocity initialization baseline, while achieving $99.7\%$ of the MOTA obtained using ground-truth velocities as the prior.

0.23

Camera Radar LiDAR Fusion via Point-Cloud Projection for Multi-Task Learning

cs.CV cs.AIcs.LG ·2026-11-02 ·Kavin Chandrasekaran, Sorin Grigorescu
hot direction similarity 0.64
Abstract · IEEE International Workshop on Signal Processing Systems 2026

Autonomous vehicles require robust perception systems to operate safely under diverse environmental conditions. While cameras provide high-resolution visual data, their performance significantly degrades in low-light and adverse weather. High Definition (HD) radar offers superior reliability and angular resolution under such conditions but lacks rich visual feature recognition. LiDAR, though expensive, delivers highly precise distance measurements and dense point clouds. Each sensor exhibits unique trade-offs, necessitating the development of advanced sensor fusion algorithms to harness complementary strengths while minimizing computational complexity and maintaining accuracy. In this study, the proposed fusion architecture performs early fusion by combining camera images with perspective-view point cloud data from HD radar and LiDAR sensors. The proposed model is trained to detect vehicles and segment free drivable space simultaneously. Experiments are performed on the RADIal dataset where we demonstrate that fusing point cloud data with camera images in front-view surpasses the performances of the most recent standalone and fusion models.

0.23

Refining Roadside 4D Radar Vehicle Classification Using Point-Cloud Dispersion

cs.CV ·2026-11-01 ·Mohammed Alsakabi, Andreia Figueiredo, António Almeida, John Dolan, Miguel Luís +3 more
similarity 0.64
Abstract

Roadside sensing infrastructure is essential for Intelligent Transportation Systems (ITS), but cameras and legacy sensors are limited in range, weather robustness, and depth accuracy. 4D radar complements these modalities by resolving range, azimuth, elevation, and radial velocity under adverse conditions, though its sparse, noisy point clouds make reliable classification difficult. We present a roadside multi-sensor platform combining a 4D radar and stereo depth camera under synchronized acquisition, used to collect a real-world dataset. Our analysis reveals a substantial class-distribution discrepancy between modalities, most notably a strong radar confusion between passenger cars and motorcycles (49.01% and\ 48.60% of the dataset). To address this, we propose a Neyman-Pearson-based binary classifier on the temporally-smoothed 2D positional standard deviation of radar point cloud clusters, reducing classification error from 52.1% to 42.7%. This lightweight and edge-deployable approach improves radar-only classification reliability and lays the foundation for future camera-radar fusion.

0.20

Adversarial Robustness of Camera-Radar Sensor Fusion for Autonomous Driving

cs.CR cs.CV ·2026-10-12 ·Ce Zhou, Yubo Wu, Khang Nguyen, Liyang Xiao, Thomas Hou +1 more
similarity 0.64
Abstract · 25 pages

Autonomous driving (AD) relies on multi-sensor perception to interpret the surrounding environment. However, the robustness of camera--radar fusion under adversarial conditions remains largely unexplored. This paper presents a systematic measurement study of the robustness of camera--radar sensor fusion in AD. We construct a unified evaluation pipeline on the nuScenes dataset that simulates attacks on both sensing modalities, including eight camera-image perturbations and three radar point-cloud perturbations. We evaluate five camera--radar fusion algorithms across two perception tasks, 3D object detection and depth estimation, and quantify their performance under clean and attacked inputs using standard metrics. Our evaluation reveals a clear asymmetry in the robustness of fusion systems. Camera perturbations substantially degrade both object detection and depth estimation, and moderate attack strengths are already sufficient to cause severe performance degradation. In contrast, the evaluated radar perturbations produce smaller and task-dependent effects, with object-detection models showing particularly limited degradation. Our analysis attributes this difference to the strong dependence of existing fusion architectures on dense camera features, together with the filtering, association, and confidence-weighting mechanisms commonly applied to sparse radar measurements. These results demonstrate that sensor fusion does not inherently guarantee robustness and that the contribution and reliability of each sensing modality must be explicitly considered under adversarial conditions. Based on four empirical findings, we derive measurement-guided design implications for future robust camera--radar fusion, including modality-specific reliability estimation, cross-modal consistency checking, adaptive fusion, and graceful failover under severe sensor degradation.

0.15