CS Paper Radar

Terrain-Aware Local Path Planning with Global DEM Data Integration for Autonomous UGV Navigation

Devender Singh, Issah Nazif Suleiman, Paul Mitten, Glenn Cutler, Vinicius Prado da Fonseca, Matthew Hamilton

cs.RO ·submitted 2026-08-17 18:38 UTC · v1

Abstract

Autonomous navigation in complex outdoor terrains presents critical challenges for unmanned ground vehicles (UGVs) due to the inherent disconnect between global mapping and real-time sensor feedback. This work proposes a hybrid framework that integrates low-resolution Digital Elevation Model (DEM) data with real-time LiDAR-based obstacle detection and terrain analysis for efficient path planning. A global path is initially computed using a preprocessed DEM-based A* algorithm. Subsequently, local sensor data drives adaptive path correction, enabling the UGV to negotiate sudden environmental changes while maintaining safety and efficiency. Simulation results in Gazebo demonstrate significant improvements over a baseline approach, achieving a 95\% obstacle avoidance rate and reducing the average encountered slope from $8^\circ$ to $2.7^\circ$ in custom terrain. This integration enhances path efficiency and terrain traversability and supports robust real-time adaptation, paving the way for more reliable autonomous navigation in dynamic outdoor environments.

Closest papers

Nearest neighbours by meaning across the whole index.

Predict Before You Step: Auditable Occupancy Forecasting for Dynamic Obstacle Avoidance under Sparse Guidance

cs.RO ·2026-09-22 ·Yuhui Mao, Fen Liu, Shenghai Yuan, Tianxin Hu, Ruimeng Liu +1 more
similarity 0.67
Abstract

Legged robots under sparse waypoint guidance must avoid moving obstacles using partial, rapidly changing LiDAR observations. We present LOOP (Latent-recurrent Occupancy rollOut Policy), a local avoidance policy that connects sparse waypoint guidance to a frozen locomotion controller at 50 Hz. From occupancy and ego-velocity histories, a recurrent predictor forecasts future occupancy over a 1 s horizon by warping the current map with learned flow and visibility gates. These maps guide velocity selection through map-derived features and geometric risk estimates, providing an explicit interface for inspecting and replacing predictions. In encounter-synchronised Isaac Lab evaluations, LOOP achieves 57.1% head-on success at obstacle speeds of 2.5-3.2 m/s, exceeding a retrained reactive baseline by 8.2 percentage points. Comparisons with a rollout-free BEV policy show smaller, scenario-dependent gains from the prediction branch, including improved crossing success and reduced variability across training seeds at the highest head-on speeds. The adapter runs onboard a Unitree Go2 in 14.5 ms per step and completes all 16 real-world crossing trials without collision, demonstrating deployment feasibility.

0.17

BEV-Diffusion: Camera-Only Traversability Navigation with BEV Memory and Efficient Cross-Robot Adaptation

cs.RO ·2026-11-18 ·Iana Zhura, Timofei Kozlov, Dmitrii Plotnikov, Ivan Valuev, Miguel Altamirano Cabrera +1 more
similarity 0.66
Abstract

Robot navigation requires both an understanding of the scene and an efficient adaptation to new robots, yet current methods rely on expensive LiDAR sensors, long mapping and modular pipelines. We present BEV-Diffusion, a camera-only model that learns a bird's-eye view (BEV) traversability map, its uncertainty and the path in a single network. A frozen DINOv2 backbone encodes consecutive RGB frames, which inverse perspective mapping and Bayesian fusion lift into the BEV, and a ranking loss keeps outdoor traversability graded rather than binary, separating asphalt from grass (median 0.94 vs. 0.75). On this map, a transformer denoiser generates polar waypoints in a few DDIM steps, and uncertainty-aware guidance refines the path and ends it where the map is no longer reliable. At deployment, a metric BEV memory keeps obstacles after they leave the camera view and warm starts each sample from the previous, ego-motion compensated path. Because the planner jointly learns the path, the map, and its uncertainty, it selects routes through terrain it can confidently traverse. In an unseen courtyard, a wheeled-legged robot autonomously traveled 120 m, completing 96% of the route without intervention, compared with 75-88% for the baselines. Even under low-light conditions after sunset, the proposed model completed the route without requiring any intervention. Retraining only the BEV head, about 3% of the parameters, adapts the model to a small legged robot in 2.3 min. Indoors, the memory gets this robot out of maze-like traps: it retains 62-66% of the nearby out-of-view obstacles, against at most 3% for the baselines, and the robot achieves 67-100% task progress, compared with 20-40% for the evaluated baselines.

0.19

LiDARFlow: Real-Time Panel-Based MAV Guidance in Unknown Environments

cs.RO ·2026-10-01 ·João Machado, Zeynep Bilgin, Matthieu Verdoucq, Murat Bronz
published similarity 0.66
Abstract

This paper presents a guidance algorithm for micro aerial vehicles operating in unknown, cluttered environments using only onboard sensing. The method is based on a panel formulation originally derived from aerodynamic potential-flow theory and generates smooth, collision-free guidance vectors from locally perceived obstacles. The approach is extended to unknown environments by constructing and updating the obstacle representation online from onboard LiDAR measurements. The resulting obstacle-avoidance field is integrated with a nominal guiding vector field to produce the final control input. The system is experimentally validated in indoor flight tests under two scenarios: waypoint navigation and directional guidance. In both cases, the vehicle successfully completes its task while avoiding all obstacles in real time using only onboard perception. The results demonstrate that the method is computationally lightweight and suitable for onboard implementation, with pointcloud processing identified as the main practical limitation. These results support the feasibility of lightweight onboard guidance in unknown environments.

0.42

PIVOT: Physically Informed Vision-Language Off-Road Traversability for Field Robot Navigation

cs.RO ·2026-09-17 ·Aoran Jiao, Wenda Zhao, Hshmat Sahak, Timothy D. Barfoot
similarity 0.65
Abstract

Terrain assessment is a critical capability for off-road mobile robots, enabling safe and reliable navigation through unstructured and geometrically complex environments. Conventional geometry-based terrain assessment is fast to compute but often overly conservative in unstructured environments. We present PIVOT: a Physically Informed Vision-Language Off-Road Traversability navigation system that augments conventional geometry-based planning with vision-language-model (VLM)-based semantic reasoning for field robots. To physically ground this assessment, we quantify how strongly the VLM's predicted traversal energy cost, robot vibration, and wheel slip correlate with real-world measurements and introduce a unified traversability score that weights each modality by its prediction-measurement correlation. For efficiency, we design a two-level navigation architecture that retains geometry-based planning as the nominal mode and invokes semantic replanning only when that mode fails to find a path. Across five repeated closed-loop trials on a mixed-terrain route totalling around $6.4$ km, the proposed system increases overall autonomy from $59.6\%$ to $97.0\%$, reduces human interventions from $11$ to $3$, and increases the mean distance between interventions (MDBI) from $69.2$ m to $412.9$ m compared with geometry-only navigation. These results demonstrate that physically grounded VLM-based terrain assessment can substantially extend autonomous navigation beyond the limitations of geometry alone, while preserving efficient geometric planning as the nominal mode.

0.21

Local Path Planning and Obstacle Avoidance for an Omnicopter Platform

cs.RO ·2026-09-03 ·Mikolaj Helinski, Spilios Theodoulis, Mahmoud Hamandi, Abdullah Mohamed Ali, Anthony Tzes +1 more
published similarity 0.65
Abstract · 8 pages, accepted paper at ICUAS 2026

Autonomous unmanned aerial vehicles (UAVs) increasingly operate in cluttered environments where global planners such as RRT* are not directly deployable at control rates. This paper presents a real-time local planning and obstacle avoidance module for an omnidirectional multirotor (omnicopter) by extending the Dynamic Window Approach to six degrees of freedom (6D-DWA). Our method achieves real-time feasibility through (i) local-map voxelisation, (ii) a compact sphere-based approximation of the vehicle geometry, and (iii) adaptive velocity sampling in the 6D search space. To improve reactivity to unknown obstacles, we introduce a context-aware "Agile Mode" that adjusts scoring weights online to trade-off between goal progress, clearance, and heading/facing constraints during evasive manoeuvres. We evaluate our approach in simulation across computational stress tests, dense-waypoint path tracking, and static/unknown obstacle scenarios. Our planner runs consistently within a 0.2s control loop, tracks waypoint-dense global paths with < 0.1m average cross-track error and 13deg average heading error, and avoids collisions in static environments. For unknown obstacle avoidance, Agile Mode achieves 79.3% success for an off-centre obstacle and 41.4% for a centred obstacle, highlighting both the effectiveness of adaptive weighting and remaining limitations in highly constrained geometries.

0.26

Learning-Based Dynamic Obstacle Avoidance for a UAV Using Only Three Range Sensors

cs.RO eess.SY ·2026-09-13 ·Mohammad Reza Ranjbar Divkoti, A. Pedro Aguiar
similarity 0.64
Abstract

We present a learning-based approach to kinodynamic online motion planning for an Unmanned Aerial Vehicle (UAV) operating at a fixed altitude in unknown dynamic environments, where real-time avoidance of both static and dynamic obstacles must be achieved under conditions of extreme partial observability. The UAV is controlled with a single degree of freedom (yaw only), resulting in constrained, nonholonomic motion similar to fixed-wing platforms. The proposed framework integrates a behavior grid map representation with Deep Reinforcement Learning (DRL), using Proximal Policy Optimization (PPO) for stable policy learning in continuous control. The key idea is the co-design of a state representation and control policy that enables reliable navigation using only three low-cost directional range sensors, without reliance on dense sensing modalities such as LiDAR or vision-based systems. The behavior grid map dynamically aggregates sparse measurements into a structured local representation that supports real-time decision-making for obstacle avoidance and target reaching. Extensive simulations across environments of varying sizes and obstacle densities demonstrate that the proposed standard and enhanced methods achieve higher success rates than PPO variants and Model Predictive Control (MPC) (94\% vs. 79--90\% in small-scale high-congestion scenarios, and 83\% vs. 62--71\% in large-scale high-congestion scenarios), while maintaining real-time performance. Real-world experiments across four scenarios further confirm practical feasibility, with consistent target-reaching behaviour and no collisions under the tested conditions.

0.23

RAEM: Robust Autonomous Exploration for Multi-Floor Environments with a Quadruped Robot

cs.RO ·2026-08-26 ·Zikang Yuan, Yuan Ren, Yian Wang, Yixue Wang, Enze Fang +8 more
hot direction similarity 0.64
Abstract · 21 pages, 23 figures

In this paper, we propose RAEM, a robust autonomous exploration framework for quadruped robots operating in multi-floor environments. Most existing ground-robot exploration approaches rely on planar traversability representations, which cannot adequately represent the overlapping structures and cross-floor connectivity of multi-floor buildings. Although tomography-based representations provide effective traversability modeling for multi-floor navigation, maintaining a global tomography map incurs substantial computational overhead for online exploration with frequent replanning. Moreover, sparse and fragmented LiDAR observations in stairwells can degrade local traversability estimation, leading to irregular viewpoint placement and temporary topological disconnections. To address these challenges, RAEM adopts a hybrid local-global traversability representation, in which a local tomography map and an explicitly categorized local 3D grid map are used for online terrain analysis and connectivity evaluation, while an elevation-aware global topological graph is incrementally constructed from these local spatial representations for efficient cross-floor exploration planning. We further introduce a staircase center alignment strategy to reduce abrupt yaw variations during climbing and a dual path searching mechanism to recover guidance paths when the global topology is locally disconnected. Extensive simulation and real-world experiments demonstrate robust and computationally stable autonomous exploration across multi-floor structures, including continuous exploration of a five-floor stairwell.

0.32

ProTrav: Probabilistic Traversability with Elevation Uncertainty Propagation for Risk-aware Off-road Navigation

cs.RO ·2026-10-22 ·Chuanlin Zuo, Miloš Prágr, Arun Kumar Singh, Mohammad Loni, Reza Ghabcheloo
similarity 0.64
Abstract · 9 pages, 7 figures

Reliable traversability estimation is essential for autonomous navigation on unstructured terrain. State-of-the-art approaches typically evaluate traversability from deterministic terrain elevation, thereby overlooking spatial correlations in the terrain and failing to account for how elevation uncertainty propagates through nonlinear traversability mappings. We propose ProTrav, a probabilistic terrain representation that uses function-space sampling to generate spatially correlated terrain realizations and propagate elevation uncertainty to traversability cost. First, a Sparse Variational Gaussian Process (SVGP) reconstructs a probabilistic elevation field from observations. Then, posterior function-space sampling generates spatially correlated terrain realizations, preserving spatial dependencies between neighboring locations while propagating elevation uncertainty through geometric features into traversability cost. Consequently, a distribution of traversability cost at arbitrary location is established, where the mean and standard deviation quantify the expected traversability cost and associated uncertainty, respectively. A risk term is defined by moment-based Upper Confidence Bound (UCB) and incorporated into a Model Predictive Path Integral (MPPI) controller for risk-aware navigation. Simulation experiments demonstrate navigation success rates exceeding 90\% on different terrains, compared with below 40\% for a baseline, while reducing attitude variations. Furthermore, the proposed approach is validated on a robot traversing real-world off-road terrain.

0.13