CS Paper Radar

LiDARFlow: Real-Time Panel-Based MAV Guidance in Unknown Environments

João Machado, Zeynep Bilgin, Matthieu Verdoucq, Murat Bronz

cs.RO ·submitted 2026-10-01 12:33 UTC · v1
published

Abstract

This paper presents a guidance algorithm for micro aerial vehicles operating in unknown, cluttered environments using only onboard sensing. The method is based on a panel formulation originally derived from aerodynamic potential-flow theory and generates smooth, collision-free guidance vectors from locally perceived obstacles. The approach is extended to unknown environments by constructing and updating the obstacle representation online from onboard LiDAR measurements. The resulting obstacle-avoidance field is integrated with a nominal guiding vector field to produce the final control input. The system is experimentally validated in indoor flight tests under two scenarios: waypoint navigation and directional guidance. In both cases, the vehicle successfully completes its task while avoiding all obstacles in real time using only onboard perception. The results demonstrate that the method is computationally lightweight and suitable for onboard implementation, with pointcloud processing identified as the main practical limitation. These results support the feasibility of lightweight onboard guidance in unknown environments.

Journal ref
IMAV - International Micro Air Vehicle Conference and Competition, Sep 2026, Strasbourg, France

Closest papers

Nearest neighbours by meaning across the whole index.

Terrain-Aware Local Path Planning with Global DEM Data Integration for Autonomous UGV Navigation

cs.RO ·2026-08-17 ·Devender Singh, Issah Nazif Suleiman, Paul Mitten, Glenn Cutler, Vinicius Prado da Fonseca +1 more
similarity 0.66
Abstract

Autonomous navigation in complex outdoor terrains presents critical challenges for unmanned ground vehicles (UGVs) due to the inherent disconnect between global mapping and real-time sensor feedback. This work proposes a hybrid framework that integrates low-resolution Digital Elevation Model (DEM) data with real-time LiDAR-based obstacle detection and terrain analysis for efficient path planning. A global path is initially computed using a preprocessed DEM-based A* algorithm. Subsequently, local sensor data drives adaptive path correction, enabling the UGV to negotiate sudden environmental changes while maintaining safety and efficiency. Simulation results in Gazebo demonstrate significant improvements over a baseline approach, achieving a 95\% obstacle avoidance rate and reducing the average encountered slope from $8^\circ$ to $2.7^\circ$ in custom terrain. This integration enhances path efficiency and terrain traversability and supports robust real-time adaptation, paving the way for more reliable autonomous navigation in dynamic outdoor environments.

0.16

VIRGA: Virtual-Agent-Intermediated Riemannian Geometry for Active-Sensing Air-Ground Coordination

cs.RO ·2026-09-18 ·Fenghe Guo, Runjie Shen, Chenyang Sun, Junrui Zhang
similarity 0.65
Abstract

Air-ground autonomy becomes harder when the unmanned aerial vehicle (UAV) must remain observable by a gimbal light detection and ranging (LiDAR) mounted on the unmanned ground vehicle (UGV). The platforms must avoid dynamic obstacles while coordinating heterogeneous motion, limited sensing, and changing task initiative within one closed loop. This paper presents VIRGA, a neural geometric coordination framework that turns dual-LiDAR observations into bounded source-specific Riemannian fields and couples them through a virtual agent with reciprocal elastic feedback. Platform-aware execution maps convert the shared coordination reference into feasible UAV, UGV, and gimbal commands while enforcing active-observation safeguards. Evaluation against three complementary baselines reveals distinct limitations. An adapted Ray-RMP controller provides the fastest Riemannian response but produces insufficient clearance in the coupled air-ground task. A dense analytical Riemannian field improves geometric avoidance, yet its high evaluation cost prevents stable field-of-view maintenance. An adapted ColAG controller achieves the lowest latency but still incurs safety and observability violations. VIRGA completes all paired warehouse conditions safely, while a long-range cave stress test without retraining demonstrates sustained coordination in irregular and confined geometry. Ablations confirm contributions from online geometric evaluation, virtual-agent mediation, and reciprocal feedback.

0.27

Learning-Based Dynamic Obstacle Avoidance for a UAV Using Only Three Range Sensors

cs.RO eess.SY ·2026-09-13 ·Mohammad Reza Ranjbar Divkoti, A. Pedro Aguiar
similarity 0.64
Abstract

We present a learning-based approach to kinodynamic online motion planning for an Unmanned Aerial Vehicle (UAV) operating at a fixed altitude in unknown dynamic environments, where real-time avoidance of both static and dynamic obstacles must be achieved under conditions of extreme partial observability. The UAV is controlled with a single degree of freedom (yaw only), resulting in constrained, nonholonomic motion similar to fixed-wing platforms. The proposed framework integrates a behavior grid map representation with Deep Reinforcement Learning (DRL), using Proximal Policy Optimization (PPO) for stable policy learning in continuous control. The key idea is the co-design of a state representation and control policy that enables reliable navigation using only three low-cost directional range sensors, without reliance on dense sensing modalities such as LiDAR or vision-based systems. The behavior grid map dynamically aggregates sparse measurements into a structured local representation that supports real-time decision-making for obstacle avoidance and target reaching. Extensive simulations across environments of varying sizes and obstacle densities demonstrate that the proposed standard and enhanced methods achieve higher success rates than PPO variants and Model Predictive Control (MPC) (94\% vs. 79--90\% in small-scale high-congestion scenarios, and 83\% vs. 62--71\% in large-scale high-congestion scenarios), while maintaining real-time performance. Real-world experiments across four scenarios further confirm practical feasibility, with consistent target-reaching behaviour and no collisions under the tested conditions.

0.23

Local Path Planning and Obstacle Avoidance for an Omnicopter Platform

cs.RO ·2026-09-03 ·Mikolaj Helinski, Spilios Theodoulis, Mahmoud Hamandi, Abdullah Mohamed Ali, Anthony Tzes +1 more
published similarity 0.62
Abstract · 8 pages, accepted paper at ICUAS 2026

Autonomous unmanned aerial vehicles (UAVs) increasingly operate in cluttered environments where global planners such as RRT* are not directly deployable at control rates. This paper presents a real-time local planning and obstacle avoidance module for an omnidirectional multirotor (omnicopter) by extending the Dynamic Window Approach to six degrees of freedom (6D-DWA). Our method achieves real-time feasibility through (i) local-map voxelisation, (ii) a compact sphere-based approximation of the vehicle geometry, and (iii) adaptive velocity sampling in the 6D search space. To improve reactivity to unknown obstacles, we introduce a context-aware "Agile Mode" that adjusts scoring weights online to trade-off between goal progress, clearance, and heading/facing constraints during evasive manoeuvres. We evaluate our approach in simulation across computational stress tests, dense-waypoint path tracking, and static/unknown obstacle scenarios. Our planner runs consistently within a 0.2s control loop, tracks waypoint-dense global paths with < 0.1m average cross-track error and 13deg average heading error, and avoids collisions in static environments. For unknown obstacle avoidance, Agile Mode achieves 79.3% success for an off-centre obstacle and 41.4% for a centred obstacle, highlighting both the effectiveness of adaptive weighting and remaining limitations in highly constrained geometries.

0.26

DR-IPC: Disturbance-Resilient Integrated Planning and Control for LiDAR-Based Quadrotor Navigation

cs.RO eess.SY ·2026-10-02 ·Peng Liu, Jingyan Wang, Qipeng Ye, Wen Li, Jinya Su +3 more
similarity 0.62
Abstract · 11 pages, 16 figures, 7 tables

LiDAR-based quadrotor navigation in cluttered environments remains challenging under external disturbances, particularly when obstacle-aware motion generation and disturbance-rejection control are handled in separate layers. This article presents disturbance-resilient integrated planning and control (DR-IPC), which combines lightweight path guidance with nonlinear model predictive control (NMPC) to directly generate angular velocity and thrust. An interconnected extended Kalman filter and nonlinear disturbance observer jointly provide filtered state estimates and reconstructed disturbances for NMPC prediction. The resulting formulation unifies nonlinear quadrotor dynamics, actuator constraints, local motion generation, and penalised safe-flight-corridor residuals without requiring a separate trajectory-optimization stage. Gazebo and MARSIM simulations, together with indoor and outdoor experiments, validate DR-IPC under wind, suspended payloads, narrow passages, ball impacts and reactive avoidance of a dynamic obstacle. In multi-goal navigation with disturbances, DR-IPC increases the number of completed missions from 1/10 to 9/10 in Gazebo and reduces the altitude RMSE from 0.34 to 0.01 m in experiments. The complete system operates onboard at 100 Hz. Supplementary videos are available on the project page https://drpp316.github.io/DR-IPC-Page/, and the source code will be released.

0.25

Lightweight and Resource-Efficient Perception for Robotic Guide Dogs

cs.DC cs.CV ·2026-10-02 ·Jinse Kwon, Yoojin Lim, Choonghan Lee, Yongseung Yu, Yongin Kwon +1 more
publishedbenchmark similarity 0.60
Abstract · accepted in ACCV 2026

Robotic guide dogs should understand their surroundings, objects, and potential risks. Prior research has focused on raw sensor data from cameras and 2D or 3D LiDAR, which precisely measure distance points rather than provide a semantic understanding of the scene. While these physical measurements are effective for robot-centric collision avoidance and robot safety, they are not suitable for human-centric guidance. The system should recognize the type and relevance of obstacles and explain them, clearly and actionably, in terms of their spatial relation to the user. We present complete on-device perception modules that fuse a 360 camera and a 2D LiDAR for reliable collision avoidance, with moving-object detection and tracking for human-centric guidance. Finally, in walking-impossible situations, a vision--language model delivers pathway explanations as a safety mechanism to reduce user anxiety. In experiments, verification of fused 360 camera--LiDAR depth shows reliable near-range perception but inherent mid-range bias, while the system as a whole sustained real-time performance under 55 W. On the real-world egocentric GuideDogQA benchmark, our system achieved 83.8\% accuracy, compared with 67.1\% for GPT-4o. These results demonstrate that practical human-centric guidance with real-time on-device inference is feasible even on quadrupeds.

0.21

Integrated Guidance and Control of a Mother-Child UAV-UGV System for Cooperative Missions

cs.RO ·2026-09-17 ·Aashish Sahu, R. Prasanth Kumar
highly cited similarity 0.59
Abstract · 27 pages, 10 figures

Autonomous recovery of a small multirotor onto a hovering multirotor carrier differs from recovery onto ground or shipborne platforms because the recovery surface is itself an actively controlled, thrust-limited aerial vehicle. This paper presents a field-validated autonomy framework for a heterogeneous rover-mothership-child system executing rover supervision, mothership transit, child deployment and sortie, autonomous return, aerial recovery, and synchronized descent. The recovery stack combines jerk-bounded reference generation, disturbance-observer-augmented planar tracking, feasibility-aware vertical control, a discrete-time barrier-based safety filter for relative vertical geometry, and communication-aware carrier-state prediction. The contribution is the coordinated system-level integration of these methods for recovery onto a hovering multirotor and its full-scale outdoor validation. The framework is implemented on a PX4-ROS 2 architecture using RTK-enabled GNSS, IMU, and barometric fusion, with mothership-side 1D lidar used only as an auxiliary near-contact cue. RTK-fixed positioning was maintained throughout testing. Across 20 outdoor cooperative missions, 17 successfully completed deployment, sortie, and recovery, giving an observed mission success rate of 85%. For successful recoveries, mean terminal-alignment time was 6.3 s, mean planar alignment error at acceptance was 0.18 m, maximum terminal planar deviation was 0.32 m within a 0.40 m capture radius, and minimum logged relative vertical separation during coupled descent was 0.41 m. Mothership planar station-keeping RMS error was 0.25 m. The three unsuccessful trials occurred at different mission stages and are analyzed separately. Results demonstrate practical autonomous aerial recovery within the tested outdoor operating envelope.

0.57

Memory-Aware Multi-Sensor Perception for Efficient and Safe Navigation in Dynamic Environments

cs.RO ·2026-09-24 ·Jingshuo Li, Yifan Xue, Yifei Li, Shubhodeep Shiv Aditya, Nadia Figueroa
similarity 0.59
Abstract

Autonomous navigation in previously unseen environments requires effective perception, persistent environmental representation, and collision avoidance while maintaining progress toward a goal. Existing perception-based methods often rely on prior maps or short-horizon observations, limiting their ability to exploit previously observed structure. We propose a memory-aware multi-sensor navigation framework that integrates LiDAR and RGB perception, online distance-field representation learning, and a stage-adaptive Modulated Control Barrier Function Quadratic Program (MCBF-QP). The framework persistently represents static infrastructure while tracking dynamic obstacles, enabling the MCBF-QP controller to exploit previously observed geometry for obstacle circumvention and adapt its safety constraints and guidance to local conditions. Experiments in complex indoor and outdoor environments demonstrate improved navigation efficiency and goal-reaching performance while maintaining collision avoidance in narrow passages and around dynamic obstacles.

0.11