CS Paper Radar

Integrated Heat and Power System Scheduling with Continuous-Time Thermal Dynamics via Bernstein-Galerkin Optimization

Jie Deng, Zhigang Li, J. H. Zheng, Ye Guo

eess.SY ·submitted 2026-08-18 02:37 UTC · v1
top venue

Abstract

Coordinated scheduling of district heating networks (DHNs) and electric power systems can improve operational flexibility and reduce costs by exploiting thermal inertia. Most existing formulations rely on simplified discrete-time DHN models, which may inadequately represent continuous spatiotemporal thermal dynamics and can lead to biased flexibility estimation and suboptimal schedules. In this paper, an integrated heat and power system scheduling framework that explicitly incorporates the continuous-time thermal dynamics of DHNs is proposed. A Bernstein-Galerkin transform method is developed to convert the underlying partial-differential thermal-dynamics constraints into a finite set of algebraic constraints, enabling tractable optimization while retaining dynamic fidelity. The resulting model transforms the original infinite-dimensional variational problem into a finite-dimensional coefficient optimization that can be solved using optimization solvers. Compared with conventional discretization approaches, the proposed method provides a more accurate representation of thermal dynamics and yields schedules with improved economic performance and reliability.

Closest papers

Nearest neighbours by meaning across the whole index.

Decentralized Continuous-Time Power Dispatch for Integrated Heat and Power Systems via Bernstein-Galerkin Equivalent Projection

eess.SY ·2026-09-29 ·Jie Deng, Zhigang Li, J. H. Zheng, Yue Chen
similarity 0.73
Abstract

Decentralized power dispatch for integrated heat and power systems (IHPSs) involves coordinating electric power systems (EPSs) and district heating networks (DHNs) while preserving privacy. The existing methods rely mainly on discretetime DHN models and constant-flow operations, limiting the ability to exploit thermal flexibility. Enabling variable-flow and variable-temperature (VF-VT) operations requires thermal-hydraulic coupling to be addressed together with continuous-time thermal dynamics. However, the simultaneous variations in mass flows and temperature lead to a nonconvex IHPS model, for which conventional decomposition methods are difficult to apply. This paper proposes a decentralized continuous-time dispatch framework using Bernstein-Galerkin equivalent projection. For a prescribed mass flow trajectory, DHN thermal dynamics are formulated in the Bernstein space and projected onto boundary variables, yielding an equivalent feasible-region model without disclosing the internal DHN topology or states. The equivalent model and DHN subproblem are derived from a unified Bernstein-Galerkin formulation, ensuring a consistent thermal state representation throughout the EPS-DHN coordination procedure. A safeguarded Anderson prediction scheme further accelerates the alternating coordination process by using historical updates and fixed-point residuals to predict the next input without additional subproblem solving steps. Numerical results show the proposed method preserves thermal state consistency, exploits VF-VT flexibility, and improves economic and computational performance.

0.14

Continuous-Time Aggregation of Massive Flexible HVAC Loads Considering Uncertainty for Reserve Provision in Power System Dispatch

eess.SY ·2026-09-02 ·Jingguan Liu, Xiaomeng Ai, Jiakun Fang, Shichang Cui, Shengshi Wang +2 more
top venuehot directionhighly cited similarity 0.68
Abstract · Published in: IEEE Transactions on Smart Grid (vol. 15, no. 5, pp. 4835-4849, 2024)

Heating, ventilation, and air conditioning (HVAC) loads, with their rapid response capabilities, can provide considerable intra-hour flexibility on the demand side for reserve provision in order to follow the fast variations of renewables. However, scheduling massive HVACs is challenging due to computation complexity and the uncertainty of outdoor temperature. In this paper, we first introduce a novel continuous-time (CT) aggregation model to reveal the potential intra-hour flexibility of HVACs. For accurate aggregation, a new affine transformation is designed to handle the heterogeneity in high-dimensional feasible region. Further, for reliable aggregation in practical environment, the outdoor temperature uncertainty is constructed by distributionally robust chance constrains and integrated into the aggregation model. Secondly, for the tractable calculation of the proposed CT aggregation model, a cascade of tailored reformulation techniques is proposed, including the Bernstein polynomial spline, polytope projection, and linearization transformation. Thirdly, a customized hierarchical dispatch framework is proposed via incorporating the proposed CT aggregation model into reserve provision in power system dispatch, so as to efficiently schedule massive HVACs to cope with the renewable uncertainty. Case studies verify the effectiveness and scalability of the proposed CT aggregation model in aggregation accuracy, intra-hour flexibility utilization, and uncertainty handling.

0.67

Differentiable Hybrid-Action Neural Feedback Control for District Heating Networks

eess.SY ·2026-10-01 ·Nicolas Kirsch, Corrado Sgadari, Alessio La Bella, Giancarlo Ferrari-Trecate
similarity 0.61
Abstract

Many cyber-physical systems require control policies that combine continuous setpoints with discrete operational de- cisions, such as equipment switching, mode selection, or resource scheduling. Discrete actions are not differentiable, which ob- structs gradient-based policy training, while conventional mixed- integer formulations remain costly to solve online. This paper proposes a hybrid-action neural controller (HANC) in which a continuous branch, a categorical branch and a differentiable assembly layer jointly generate commands that satisfy complex actuator constraints by construction. Categorical decisions are handled using a straight-through Gumbel estimator, enabling the policy to be trained by backpropagation through time over full closed-loop rollouts. The proposed framework is deployed on a district heating network (DHN) featuring multiple heat generation units and stratified thermal energy storage. Its performance is evaluated on a simulation of a real DHN located at RSE SpA in Italy. The resulting policy jointly learns switching decisions and continu- ous operating setpoints. Under dynamic electricity pricing, the learned controller reduces operating cost by 30% compared to a rule-based industrial baseline. We also show that, compared with a deterministic straight-through relaxation, injecting noise during training achieves similar cost while reducing hard switching by an order of magnitude, and attribute this difference to the wider decision margins of the resulting policy.

0.24

Computationally Transparent Power Flexibility Aggregation via Directional Support Evaluation

eess.SY ·2026-10-21 ·Mingyu Zhai, Liang Du, Yue Chen
similarity 0.60
Abstract · Preprint. Submitted for journal review

The growing penetration of distributed energy resources (DERs) creates new opportunities for improving resource adequacy, operational flexibility, and power-system reliability. However, efficiently characterizing the aggregate flexibility of heterogeneous DER portfolios remains challenging because of high dimensionality, diverse operating dynamics, and spatio-temporal coupling constraints. This paper proposes a computationally transparent framework that formulates aggregate flexibility characterization as a sequence of linear programming (LP)-based directional support evaluations. The framework accommodates heterogeneous DER technologies and configurable device-, feeder-, and portfolio-level constraints. The convex hull of the resulting boundary trajectories provides a feasible inner approximation of the coupled aggregate power flexibility region. Theoretical analysis establishes feasibility and non-overestimation guarantees and characterizes the computational dependence on portfolio size, scheduling horizon, and direction budget. In the small-scale case, the proposed method produces tighter projected regions than box, zonotope, and Chebyshev inner-ball benchmarks and matches a dense directional reference within numerical tolerance using 16--64 construction directions. Large-scale simulations with up to 2000 DERs demonstrate approximately linear empirical runtime scaling with the portfolio size and direction budget over the tested ranges. The results establish a scalable and theoretically grounded approach for aggregate DER flexibility characterization.

0.27

Modeling of Network Constraints in Large-scale Capacity Expansion Optimization of Power Grids

eess.SY math.OC ·2026-08-28 ·Yu Weng, Lara Booth, Priya L. Donti, Ruaridh Macdonald
publishedtheoryhot direction similarity 0.59
Abstract

Capacity expansion modeling plays a critical role in optimizing the deployment of new generation, storage, and transmission, typically at national and regional levels. To support long-term planning, these models consider a large set of energy technologies and policies, along with decades of weather and demand data. Realistic capacity expansion models thus become high-dimensional optimization problems, with hundreds of millions of variables and constraints, which are challenging to solve. A common strategy to address this complexity is to omit non-linear, non-convex AC optimal power flow (ACOPF) constraints and instead use linearized power balance equations or transport formulations. While these simplifications improve tractability, they limit our understanding of how power flow and the physical properties of power networks impact investment decisions across generation, storage, and transmission infrastructure. This paper addresses this gap by extending the GenX capacity expansion model to incorporate fixed point theorem-based network constraints. These embed ACOPF-based considerations while maintaining the tractability of the planning model, nearly preserving the dimensionality of the transport formulation and incurring only modest runtime increases. This approach is much cheaper than embedding ACOPF directly, making it appropriate for large-scale capacity planning problems. We compare our approach to the original transport-based GenX model as well as a non-linear, non-convex version that incorporates the full ACOPF constraints, for a case study of the ISO New England grid.

0.47

Building Seasonal Highways for Residential Energy Hubs: Sizing, planning and operating thermal energy storage

eess.SY math.OC ·2026-10-01 ·Dario Slaifstein, Mohammad Khosravi, Gautham Ram Chandra Mouli, Laura Ramirez-Elizondo, Pavol Bauer
similarity 0.59
Abstract

The operation of residential energy hubs with multiple energy carriers (electricity, heat, mobility) poses a significant challenge due to the energy storage differences in time-constants, round-trip efficiencies and self-discharge rates. Usually, thermal storage exhibits flexibility in yearly planning optimizations or long-term scenarios. However, as optimization horizons shrink (1-48hs) so does their supplied value due to the lower round-trip efficiencies. To avoid this early depletion during operation this paper proposes a data-driven highway to steer the short-term daily control towards long-term optimality. The proposed methodology also presents how to optimally size the thermal storage and avoid yearly simulations and how all of this is related to nonlinearities in the daily operation. The presented framework links seasonal and daily optimizations through dynamic terminal sets and value functions. The seasonally-aware nonlinear economic model predictive controller achieves the most balanced performance, with the second best mean grid cost of all MPCs at -\texteuro 209. It also achieves better battery degradation control than its linear counterparts (between 26-34%) and the best thermal comfort of the nonlinear benchmarks. Nevertheless, the data-driven seasonal highway restrains the ability to control battery degradation and slightly increases computational time.

0.14

Thermal-Mass Coupled Modeling and Optimal Scheduling of Aluminum Smelting Loads for Safe Demand Response Participation

eess.SY ·2026-10-27 ·Yan Shen, Ruike Lyu, Shuoqi Wang, Jing Dai, Hongye Guo +1 more
top venue similarity 0.58
Abstract · Accepted for publication in IEEE Transactions on Smart Grid. DOI: 10.1109/TSG.2026.3736640. This is the author-accepted manuscript

Aluminum smelting loads (ASLs) offer substantial flexibility potential, yet their actual participation in demand response remains conservative owing to the risk of operational failures. Power adjustments disturb the electrolyte temperature and superheat, which may lead to electrolyte freeze-out or yield loss. Existing ASL demand response methods often rely on oversimplified dynamic models of the electrolytic cell's thermal behavior, such as linear models and the Equivalent Thermal Parameter (ETP) model, which may either violate temperature constraints or underestimate the available flexibility. To address this limitation, this paper proposes a Thermal-Mass Coupled (TMC) dynamic model. The model captures the essential physical mechanisms of electrolytic cells, including alumina feed dynamics, ledge phase-change dynamics, and state-dependent current efficiency. The resulting nonlinear relations are reformulated into a tractable mixed-integer linear programming (MILP) model using Taylor approximations and McCormick-envelope reformulations. In the illustrative PBDR and IBDR case studies, the nonlinear reference-model assessment shows that the TMC model achieves net economic improvements 122.4% and 325.1% higher, respectively, than the ETP model. The proposed framework can therefore support deeper demand response participation by aluminum smelters while explicitly assessing adherence to operational safety constraints.

0.45

ADACT: PDE-Constrained Thermal Hardware/Software Co-Design Adjoint-Driven Optimal Control via Finite Difference Discretization

cs.AR math.OCeess.SYmath.NA ·2026-10-26 ·Don Li
similarity 0.56
Abstract

By virtue of the sheer compute demands of large-scale artificial intelligence (AI) and high-performance computing (HPC), modern multi-core microprocessors suffer from severe power density limits and thermal throttling, entailing an urgent need for principled methods for predictive, physics-informed dynamical thermal management (DTM). Here, we introduce a hardware/software co-design physics-informed PDE-constrained DTM throttling optimal control algorithm, ADACT (Adjoint-Driven Adaptive Co-Design Thermal Control), that minimizes thermal risk and cooling energy overhead while maximizing core execution throughput. The underlying physical temperature field is governed by a two-dimensional nonhomogeneous parabolic reaction-diffusion equation with spatially localized, time-varying power source terms and variable convective cooling subject to nonhomogeneous Dirichlet boundary conditions. We employ a discretization of the continuous state PDE via a Crank-Nicolson finite difference scheme with a 5-point discrete Laplacian operator on a uniform spatial mesh, which preserves unconditional numerical stability and $O(Δx^2 + Δy^2 + Δt^2)$ second-order temporal and spatial accuracy. To efficiently compute exact gradients, we construct and implement a continuous backward-in-time adjoint state method with L-BFGS as our optimization algorithm of choice. The accuracy and second-order convergence rates of both forward state and backward adjoint solvers are quantitatively verified via the Method of Manufactured Solutions (MMS), and gradient accuracy is validated using directional derivative Taylor tests. Numerical experiments demonstrate that ADACT dynamically throttles software power workloads and modulates hardware cooling efforts to strictly uphold physical thermal thresholds while maintaining operational throughput.

0.28