CS Paper Radar

Decentralized Continuous-Time Power Dispatch for Integrated Heat and Power Systems via Bernstein-Galerkin Equivalent Projection

Jie Deng, Zhigang Li, J. H. Zheng, Yue Chen

eess.SY ·submitted 2026-09-29 09:58 UTC · v1

Abstract

Decentralized power dispatch for integrated heat and power systems (IHPSs) involves coordinating electric power systems (EPSs) and district heating networks (DHNs) while preserving privacy. The existing methods rely mainly on discretetime DHN models and constant-flow operations, limiting the ability to exploit thermal flexibility. Enabling variable-flow and variable-temperature (VF-VT) operations requires thermal-hydraulic coupling to be addressed together with continuous-time thermal dynamics. However, the simultaneous variations in mass flows and temperature lead to a nonconvex IHPS model, for which conventional decomposition methods are difficult to apply. This paper proposes a decentralized continuous-time dispatch framework using Bernstein-Galerkin equivalent projection. For a prescribed mass flow trajectory, DHN thermal dynamics are formulated in the Bernstein space and projected onto boundary variables, yielding an equivalent feasible-region model without disclosing the internal DHN topology or states. The equivalent model and DHN subproblem are derived from a unified Bernstein-Galerkin formulation, ensuring a consistent thermal state representation throughout the EPS-DHN coordination procedure. A safeguarded Anderson prediction scheme further accelerates the alternating coordination process by using historical updates and fixed-point residuals to predict the next input without additional subproblem solving steps. Numerical results show the proposed method preserves thermal state consistency, exploits VF-VT flexibility, and improves economic and computational performance.

Closest papers

Nearest neighbours by meaning across the whole index.

Integrated Heat and Power System Scheduling with Continuous-Time Thermal Dynamics via Bernstein-Galerkin Optimization

eess.SY ·2026-08-18 ·Jie Deng, Zhigang Li, J. H. Zheng, Ye Guo
top venue similarity 0.73
Abstract

Coordinated scheduling of district heating networks (DHNs) and electric power systems can improve operational flexibility and reduce costs by exploiting thermal inertia. Most existing formulations rely on simplified discrete-time DHN models, which may inadequately represent continuous spatiotemporal thermal dynamics and can lead to biased flexibility estimation and suboptimal schedules. In this paper, an integrated heat and power system scheduling framework that explicitly incorporates the continuous-time thermal dynamics of DHNs is proposed. A Bernstein-Galerkin transform method is developed to convert the underlying partial-differential thermal-dynamics constraints into a finite set of algebraic constraints, enabling tractable optimization while retaining dynamic fidelity. The resulting model transforms the original infinite-dimensional variational problem into a finite-dimensional coefficient optimization that can be solved using optimization solvers. Compared with conventional discretization approaches, the proposed method provides a more accurate representation of thermal dynamics and yields schedules with improved economic performance and reliability.

0.57

Continuous-Time Aggregation of Massive Flexible HVAC Loads Considering Uncertainty for Reserve Provision in Power System Dispatch

eess.SY ·2026-09-02 ·Jingguan Liu, Xiaomeng Ai, Jiakun Fang, Shichang Cui, Shengshi Wang +2 more
top venuehot directionhighly cited similarity 0.58
Abstract · Published in: IEEE Transactions on Smart Grid (vol. 15, no. 5, pp. 4835-4849, 2024)

Heating, ventilation, and air conditioning (HVAC) loads, with their rapid response capabilities, can provide considerable intra-hour flexibility on the demand side for reserve provision in order to follow the fast variations of renewables. However, scheduling massive HVACs is challenging due to computation complexity and the uncertainty of outdoor temperature. In this paper, we first introduce a novel continuous-time (CT) aggregation model to reveal the potential intra-hour flexibility of HVACs. For accurate aggregation, a new affine transformation is designed to handle the heterogeneity in high-dimensional feasible region. Further, for reliable aggregation in practical environment, the outdoor temperature uncertainty is constructed by distributionally robust chance constrains and integrated into the aggregation model. Secondly, for the tractable calculation of the proposed CT aggregation model, a cascade of tailored reformulation techniques is proposed, including the Bernstein polynomial spline, polytope projection, and linearization transformation. Thirdly, a customized hierarchical dispatch framework is proposed via incorporating the proposed CT aggregation model into reserve provision in power system dispatch, so as to efficiently schedule massive HVACs to cope with the renewable uncertainty. Case studies verify the effectiveness and scalability of the proposed CT aggregation model in aggregation accuracy, intra-hour flexibility utilization, and uncertainty handling.

0.67

Computationally Transparent Power Flexibility Aggregation via Directional Support Evaluation

eess.SY ·2026-10-21 ·Mingyu Zhai, Liang Du, Yue Chen
similarity 0.55
Abstract · Preprint. Submitted for journal review

The growing penetration of distributed energy resources (DERs) creates new opportunities for improving resource adequacy, operational flexibility, and power-system reliability. However, efficiently characterizing the aggregate flexibility of heterogeneous DER portfolios remains challenging because of high dimensionality, diverse operating dynamics, and spatio-temporal coupling constraints. This paper proposes a computationally transparent framework that formulates aggregate flexibility characterization as a sequence of linear programming (LP)-based directional support evaluations. The framework accommodates heterogeneous DER technologies and configurable device-, feeder-, and portfolio-level constraints. The convex hull of the resulting boundary trajectories provides a feasible inner approximation of the coupled aggregate power flexibility region. Theoretical analysis establishes feasibility and non-overestimation guarantees and characterizes the computational dependence on portfolio size, scheduling horizon, and direction budget. In the small-scale case, the proposed method produces tighter projected regions than box, zonotope, and Chebyshev inner-ball benchmarks and matches a dense directional reference within numerical tolerance using 16--64 construction directions. Large-scale simulations with up to 2000 DERs demonstrate approximately linear empirical runtime scaling with the portfolio size and direction budget over the tested ranges. The results establish a scalable and theoretically grounded approach for aggregate DER flexibility characterization.

0.27

Preference-Oriented Aggregation of Heterogeneous Distributed Energy Resources for Reserve Dispatch

eess.SY ·2026-09-03 ·Jingguan Liu, Xiaomeng Ai, Shichang Cui, Xizhen Xue, Shengshi Wang +3 more
top venuehighly cited similarity 0.55
Abstract · Published in: IEEE Transactions on Smart Grid (vol. 17, no. 2, pp. 1264-1279, 2026)

Aggregating distributed energy resources (DERs) aims to encode their collective flexibility into a single set for efficient grid dispatch. However, existing aggregation methods are overly conservative for heterogeneous DERs due to two main challenges: 1) dimensional heterogeneity, which complicates the combination of flexibilities across different time dimensions, and 2) type heterogeneity, where diverse and irregular DER profiles hinder accurate approximations, resulting in significant flexibility loss. To resolve these challenges, this paper propose a novel preference-oriented aggregation method for reserve dispatch. For dimensional heterogeneity, we extend existing techniques by reformulating the Minkowski sum as a polytope projection problem using a matrix transformation technique. By unifying DERs in a higher-dimensional space and projecting them back into the aggregate feasible region, the proposed technique effectively aggregates dimensionally heterogeneous DERs. For type heterogeneity, we further develop a distributed aggregation-dispatch coordination framework that incorporates reserve dispatch preferences into aggregation. This framework effectively captures the critical, active aggregate flexibility prioritized in optimal reserve dispatch, thereby significantly reducing the flexibility loss when aggregating type-heterogeneous DERs. Numerical tests validate the effectiveness of our method in addressing both heterogeneities and highlight its promising potential for power systems with high reserve requirements.

0.47

TDMOpt: LLM-Driven Cross-layer Dispatch for Transmission-Distribution-Microgrid Systems

eess.SY ·2026-11-11 ·Jiayang Tu, Bojun Du, Jijun Shui, Ershun Du, Qin Wang
similarity 0.55
Abstract

Coordinating transmission networks, distribution networks, and microgrids enables distributed flexibility to support renewable energy integration and low-carbon operation. However, heterogeneous resources, cross-layer coupling, and varying operating requirements complicate the selection of models and coordination schemes that are both physically adequate and computationally tractable. This paper proposes TDMOpt, a LLM-driven multi-agent framework that replaces fixed modeling configurations with adaptive model composition. A layered component library provides executable network, resource, objective, constraint, and coordination models. Guided by retrieved physics and component knowledge, the agents infer specific modeling requirements and jointly select compatible components across layers according to operating conditions and computational budgets. The model compositions undergo independent AC power flow validation, since feasibility in a simplified formulation does not ensure compliance with physical network limits. A refinement mechanism interprets numerical feedback to identify modeling requirements for reconsideration and revise relevant component selections. Case studies on different scale systems illustrate the framework's ability to adapt model combinations and obtain validated dispatch solutions through targeted refinement under varying operating conditions.

0.31

Approximating Energy-Regulation Feasible Region of Virtual Power Plants: A Data-driven Inverse Optimization Approach

eess.SY math.OC ·2026-08-26 ·Ruike Lyu, Hongye Guo, Qixin Chen
publishedhighly cited similarity 0.54
Abstract · Published in: 2024 IEEE Power & Energy Society General Meeting (PESGM)

System operators will probably allow virtual power plants (VPPs) to submit their feasible region (FR) for market clearing and dispatch. A VPP needs to determine its FR to submit as a whole based on the individual operation model of its internal distributed energy resources (DERs), which is an FR aggregation problem. Existing FR aggregation approaches rely on analytical methods, which have issues with generality and adaptability. In this paper, we propose a data-driven approach to approximate the energy-regulation FR of VPPs. It adopts the virtual battery model to approximate the aggregate FR of a VPP and determines the model parameters through inverse optimization based on generated multi-scenario operation data using the original operation model. Numerical tests verified the accuracy of the proposed method. We believe that our work helps to better leverage the flexibility of DERs.

0.63

Optimal Coordination of Heat Pump Demand Flexibility and Battery Energy Storage Considering the Operation of Distribution Networks

eess.SY ·2026-10-06 ·Gustavo L. Aschidamini, Guilherme S. Castiglio, Mariana Resener
similarity 0.54
Abstract

Electrifying space heating with heat pumps (HP) and backup electric-resistance heaters (ERH) is incentivized to support decarbonization but increases voltage and thermal issues in distribution networks. Direct load control (DLC) of smart thermostats (ST) provide grid support, yet, to the best of our knowledge, existing methods do not co-optimize this flexibility with grid-scale battery energy storage systems (BESS) and voltage-regulation devices, and do not use ERH for preheating, limiting peak demand reduction and undervoltage mitigation. We propose a mixed-integer linear programming (MILP)-based model predictive control (MPC) framework that coordinates ST setpoints for preheating and setback, grid-scale BESS, on-load tap changers, switched capacitor banks, and step voltage regulators. The framework is evaluated on 23-node and 733-node distribution networks, including a real-data-based feeder, across multiple realized days. On the 23-node feeder with 50% HP penetration and 50% DLC participation, the proposed framework reduces the feeder peak by 23.1%, and by 27.1% with the co-optimized BESS. Rolling-horizon setpoint optimization contributes 6.5 percentage points beyond a day-ahead ST schedule (16.6%), and dispatching the ERH for preheating adds 2.7 percentage points beyond backup-only operation (20.4%). On the 733-node feeder, where thermal congestion is the binding constraint, the framework reduces overloaded branches by 94% and overloaded transformers by 47%. These results demonstrate the potential of coordinated demand flexibility and voltage regulation to accommodate heating electrification.

0.12

ADACT: PDE-Constrained Thermal Hardware/Software Co-Design Adjoint-Driven Optimal Control via Finite Difference Discretization

cs.AR math.OCeess.SYmath.NA ·2026-10-26 ·Don Li
similarity 0.53
Abstract

By virtue of the sheer compute demands of large-scale artificial intelligence (AI) and high-performance computing (HPC), modern multi-core microprocessors suffer from severe power density limits and thermal throttling, entailing an urgent need for principled methods for predictive, physics-informed dynamical thermal management (DTM). Here, we introduce a hardware/software co-design physics-informed PDE-constrained DTM throttling optimal control algorithm, ADACT (Adjoint-Driven Adaptive Co-Design Thermal Control), that minimizes thermal risk and cooling energy overhead while maximizing core execution throughput. The underlying physical temperature field is governed by a two-dimensional nonhomogeneous parabolic reaction-diffusion equation with spatially localized, time-varying power source terms and variable convective cooling subject to nonhomogeneous Dirichlet boundary conditions. We employ a discretization of the continuous state PDE via a Crank-Nicolson finite difference scheme with a 5-point discrete Laplacian operator on a uniform spatial mesh, which preserves unconditional numerical stability and $O(Δx^2 + Δy^2 + Δt^2)$ second-order temporal and spatial accuracy. To efficiently compute exact gradients, we construct and implement a continuous backward-in-time adjoint state method with L-BFGS as our optimization algorithm of choice. The accuracy and second-order convergence rates of both forward state and backward adjoint solvers are quantitatively verified via the Method of Manufactured Solutions (MMS), and gradient accuracy is validated using directional derivative Taylor tests. Numerical experiments demonstrate that ADACT dynamically throttles software power workloads and modulates hardware cooling efforts to strictly uphold physical thermal thresholds while maintaining operational throughput.

0.28