CS Paper Radar

UniReflex: Plug-and-Play Force Control for Pretrained Generative Policies via Fast-Slow Reflex

Yan Huang, Shoujie Li, Ziwu Song, Wenbo Ding

cs.RO ·submitted 2026-08-18 06:54 UTC · v1
highly cited

Abstract

Generative imitation learning policies excel at trajectory planning but lack closed-loop force regulation, while directly incorporating force modalities often requires redesigning or retraining the network. We present UniReflex, a universal plug-and-play framework that equips frozen generative policies with variable impedance control (VIC) for contact regulation, guided by force-direction intent collected during demonstration, without further slow-backbone fine-tuning. By non-invasively intercepting deep latent representations from the action head, UniReflex drives a fast reflex network that decouples active force exertion from external interaction response. This scheme predicts normalized anisotropic stiffness directions for directional compliance allocation. Furthermore, UniReflex integrates an adaptive gating mechanism that enables seamless transitions between position-dominant planning and force-dominant execution. Real-world bimanual experiments demonstrate that UniReflex significantly improves contact stability and success rates while preserving original position accuracy. Our approach achieves 25-66x lower per-step backward latency relative to joint training strategies on the evaluated backbones.

Closest papers

Nearest neighbours by meaning across the whole index.

ImpedanceMimic: Learned Impedance as Action Space for Force-Accurate Motion Imitation

cs.RO cs.GRcs.LG ·2026-11-14 ·Matthias Jammot, Pembe Gizem Özdil
code/data similarity 0.78
Abstract · 39 pages, 13 figures, 28 tables. Project page: https://impedancemimic.github.io/ImpedanceMimic/

Recovering the forces behind a motion is ill-posed: different controllers can reproduce the same movement while generating different contact forces. Physics-based motion imitation resolves this ambiguity through simulation, but relies on fixed-gain proportional-derivative (PD) control. We show that fixed gains impose a trade-off between motion and force tracking, as contact and swing place conflicting demands on joint stiffness and damping. We introduce ImpedanceMimic, a reinforcement-learning policy that modulates per-joint stiffness, damping, and position setpoints from motion and force measurements, but requires only motion at inference. Across 129 participants and six activities, ImpedanceMimic outperforms matched fixed-gain PD under every integration scheme, direct-torque, muscle-actuated and existing imitation controllers in kinematic and force fidelity, approaching a dedicated motion-to-force regressor. By expressing gains as multiples of inertia-scaled priors, a single policy controls subject-specific biomechanical models without explicit anthropometric input and transfers zero-shot to unseen humans and a humanoid robot. The learned impedance forms a low-dimensional representation of motor state, shared across bodies, that generalizes to withheld activities: stiffness scales with load, and damping anticipates unloading.

0.17

Wrench-ACT: Enhancing Robot Policies for Contact Rich Behavior Using Direct Wrench Control

cs.RO ·2026-09-29 ·Johannes Hechtl, Yannik Blei, Simon Ball, Reihaneh Mirjalili, Michael Krawez +3 more
similarity 0.74
Abstract

While contact-rich manipulation requires deliberate regulation of interaction forces, recent approaches to robot manipulation learning predominantly represent actions as target positions or poses. Even methods that incorporate force sensing either use it solely as an observation or, when predicting forces as part of the output, rely on a hybrid force controller. In this paper, we propose an imitation learning policy that predicts wrenches as its sole action output for direct use by a pure force controller. Our studies suggest that force-domain imitation learning depends critically on data collection, with force-feedback teleoperation improving policy performance by capturing the operator's deliberate force regulation. Using Action Chunking with Transformers (ACT) as the base architecture, we train single-task models on bilateral wrench demonstrations and evaluate them on five contact-rich manipulation tasks. The wrench policy matches or outperforms position-based baselines across all tasks, with gains varying according to the degree of deliberate force regulation each task requires. Cross-condition ablations show that the bilateral data collection interface and the wrench action space each contribute independently to performance. To support further research, we will release over 1000 wrench-action demonstrations spanning these tasks on a companion website upon publication.

0.16

Residual Compliant Policy: Learning Compliant Policies from Few Demonstrations

cs.RO ·2026-10-01 ·Chunyu Jiang, Yichen Cai, Shuai Li, Wenbin Sun, João Carvalho +4 more
similarity 0.74
Abstract · 9 pages, 6 figures. Project website: https://residual-compliant-policy.github.io

Contact-rich manipulation requires a robot to be precise in free space to establish the intended contacts, and compliant once in contact to avoid excessive forces. Imitation learning has proven effective for simpler manipulation tasks, but the compliance underlying a demonstration is not directly observable and is therefore difficult to infer from demonstration data alone. We present a framework that makes compliance explicit at every stage. During data collection, the operator teleoperates the real robot while a synchronized digital twin visualizes the error between the commanded reference and the achieved pose, making the current compliance visible, and selects between two discrete compliance modes. To generalize across object poses, we combine Laplacian editing, which retargets trajectories efficiently but is not physics-consistent during contact, with simulation-based trajectory optimization, which enforces physical plausibility but offers no manual guidance. Finally, a residual reinforcement learning policy refines the interaction forces by adjusting the reference pose of the underlying admittance controller. We evaluate on three flipping and pushing tasks on a Franka FR3 based on a total of 7 demonstrations across tasks. Our method is successful on all 40 out-of-distribution trials, compared to 33/40 and 24/40 for two baselines, with our base policy alone reaching 35/40.

0.27

Res-HIL: Human-Guided Residual Reinforcement Learning for Sample-Efficient Dexterous Manipulation

cs.RO ·2026-09-24 ·Mariia Iavorskaia, Christian Dietz, Sebastian Albrecht, Majid Khadiv
similarity 0.74
Abstract

Imitation learning enables robots to acquire manipulation skills from demonstrations, but the resulting policies can fail outside the training data, while collecting more demonstrations requires substantial human effort. Human-in-the-loop reinforcement learning uses corrective feedback during online training, but typically learns the complete task policy rather than refining a pretrained imitation policy. We introduce Res-HIL, a human-in-the-loop residual reinforcement learning framework that learns corrective actions on top of a frozen imitation policy. Each human intervention provides two complementary learning signals: direct supervision of the residual policy and reward shaping of preceding autonomous behavior. Res-HIL combines these signals with zero initialization of the residual policy to stabilize and accelerate online learning. We evaluate Res-HIL on five contact-rich manipulation tasks spanning high-precision and long-horizon behaviors. With only 20 initial demonstrations, Res-HIL outperforms state-of-the-art full-policy human-in-the-loop reinforcement learning and residual fine-tuning without human guidance on every task after ten minutes of online training. Res-HIL improves its pretrained base policies and outperforms imitation policies trained with five times more demonstrations. An ablation study shows that direct residual supervision is critical to performance, while intervention-aware reward shaping substantially improves training efficiency.

0.16

Manifold Generative Annealing for Contact Constraint-aware Impedance Control with Reinforcement Learning Prior

cs.RO ·2026-10-15 ·Zhilin He, Guoquan Qi, Changliu Liu
similarity 0.73
Abstract

Contact-rich robotic tasks require coordinated motion and impedance under uncertain interaction dynamics and physical constraints. While recent methods on learned policies provide useful interaction strategies, they may fail when contact conditions differ from those encountered during training. Model-based generative methods show promising receding-horizon trajectories optimization results, but often lack structured behavioral guidance and refinement that jointly accounts for constraint geometry and actual contact responses. To this end, we propose Manifold Generative Annealing (MGA), a joint model-free and model-based generative framework for motion--impedance optimization. MGA first organizes pretrained reinforcement learning policies into structured sequence proposals, retaining task-specific interaction strategies without committing to their execution. It then evaluates these proposals alongside exploratory samples through model-based rollouts for refinement or separate execution selection. Crucially, realization-aware manifold refinement aligns updates from the refinement bank with both task constraints and locally achievable physical responses, allowing learned experience to guide online adaptation under changing contact conditions. Experiments cover surface scanning, peg insertion, and humanoid pushing, with improved safety success rate of impedance control under nominal and sensing-shift conditions.

0.14

Contact-Aware Imitation Learning Through Contact Factorization

cs.RO ·2026-10-07 ·Jiho Hong, Daeun Song, Sanghyun Kim, Mingyo Seo
code/data similarity 0.73
Abstract

Generalizable contact-rich manipulation requires robots to preserve intended task behavior while adapting its physical realization to changing contact conditions. However, interaction forces can vary substantially with small changes in surface geometry, orientation, and friction, making policies trained directly on raw force measurements difficult to transfer beyond demonstrated conditions. We introduce FACE, a contact-factorized imitation learning framework that separates intended task behavior from environment-dependent contact factors. Our representation expresses interaction forces in normalized, contact-relative coordinates, while a learned contact-normal estimator and an online friction estimator infer the local contact normal and effective friction scale. Together, these estimators enable force observations to be encoded and policy outputs to be decoded into physical motion and force commands during execution. In this way, FACE adapts execution to current contact conditions while preserving the intended task behavior, without updating the policy parameters. We evaluate FACE on real-robot contact-rich manipulation under unseen variations in surface properties and geometry, demonstrating robust generalization across contact conditions through controlled comparisons with variants that adapt prior approaches to our setting. Videos and additional materials can be found on the project page: https://rcilab.khu.ac.kr/face.

0.28

Energy-Regularized Imitation Learning for Force- and Work-Aware Robotic Manipulation

cs.RO cs.CV ·2026-09-16 ·Toshiki Otani, Hiromu Taketsugu, Norimichi Ukita
published similarity 0.72
Abstract · ECCV 2026 Workshop on Force-Grounded, Cross-View Articulated Manipulation

This paper studies energy-aware manipulation as a physically grounded learning problem. We define a joint-space mechanical-work proxy from joint torque and angular displacement, and train a differentiable energy predictor that estimates this work from robot states and actions. The predictor converts a non-differentiable simulator-side physical quantity into a differentiable regularizer for fine-tuning a pretrained manipulation policy. We instantiate the framework with RVT-2 on RLBench and evaluate 12 manipulation tasks involving object contact, articulated motion, placement, pushing, and sweeping. The proposed fine-tuning reduces the average mechanical work from 208.8J to 204.4J (i.e., 2.1% reduction), while the mean task success rate also increases slightly from 86.2% to 86.9%. These results show that work-aware policy optimization can suppress physically inefficient motion without requiring an explicit differentiable dynamics model.

0.34

Imp-ACT: Adaptive Impedance Control and Action Chunking with Transformers to Learn Contact-Rich Manipulation from Demonstrations

cs.RO ·2026-09-25 ·Luca Zanetti, Doganay Sirintuna, Idil Ozdamar, Pietro Balatti, Heng Zhang +1 more
similarity 0.72
Abstract · 9 pages, 5 figures, submitted to IEEE International Conference on Robotics & Automation 2027, for associated video see https://youtu.be/iAu_…

Contact-rich manipulation requires robots to balance accurate motion tracking with compliant interaction, yet most visual-action policies leave compliance fixed at the controller level. We present Imp-ACT, a methodologically grounded and practical approach to incorporating direction-dependent Cartesian stiffness modulation directly into demonstration collection, without manual stiffness selection or offline target reconstruction. During teleoperation, a self-tuning impedance controller adapts stiffness along the instantaneous direction of motion while maintaining compliance in orthogonal directions. The adapted stiffness is applied and recorded alongside visual observations and motion commands, capturing motion and compliance under the same dynamics. We implement this pipeline using Action Chunking with Transformer (ACT) to predict end-effector pose, gripper action, and motion-direction stiffness from visual, proprioceptive, and wrench observations. The performance of Imp-ACT is evaluated on wiping and plug insertion using both success rate and quantitative measures of contact behavior. Compared with fixed low- and high-stiffness baselines, Imp-ACT achieves comparable or higher success while maintaining low interaction forces. In wiping, it reduces contact-force vibration by approximately $29\times$ relative to the compliant baseline and $180\times$ relative to the stiff baseline. In plug insertion, it reduces forces orthogonal to the insertion direction by $43\%$ relative to the better fixed-stiffness baseline. These results highlight the benefit of maintaining sufficient stiffness along the direction needed for task execution while preserving compliance in other directions to limit contact forces and accommodate environmental constraints.

0.32