CS Paper Radar

Power Estimation and Optimal Work-Charging Scheduling of Construction Electric Vehicles via Mobile Charging Stations

Avik Ghosh, Akın Taşcıkaraoğlu, Daniela Rojas, Muhammed A. Beyazıt, Mohammad Reza Salehizadeh, Keaton Chia, Sasha Doppelt, Michael Ferry, Jan Kleissl, Sujit Dey, Yuanyuan Shi

eess.SY ·submitted 2026-08-19 03:34 UTC · v1
code/data

Abstract

Construction electric vehicles (CEVs) are a promising clean alternative to diesel-powered construction equipment, but their adoption is constrained by sparse onsite charging infrastructure, limited CEV mobility, and insufficient understanding of their power consumption. We address these gaps through a field-data-driven framework coupling CEV power estimation with mobile-charging-aware work scheduling. First, using a real-world construction demonstration at the University of California, San Diego, we develop and validate a per-subactivity power estimation model for a compact electric excavator. Manually labeled video is synchronized with coarse battery state-of-charge (SOC) telematics, and constrained nonnegative least squares is used to recover each subactivity's average power consumption. The model predicts held-out test data within $17\%$ normalized mean absolute error (NMAE), and the accompanying dataset is released publicly. Second, leveraging the subactivity power estimates, we formulate a mixed-integer program that jointly optimizes CEV work and charging schedules together with the location, timing, and charging/discharging of mobile charging stations (MCSs) serving the CEVs. The optimization accounts for energy and demand charges, carbon emissions, unmet work penalties, MCS travel, and the physical and operational constraints of the CEVs and MCSs. Across realistic scenarios drawn from the demonstration, the proposed co-optimization attains the lowest operating cost in every case, being $7$--$96\%$ below the best-performing baseline, while solving most instances to proven optimality within an hour. Dataset and scripts are available at https://github.com/ghosh-avik/CEV-MCS-Power-Estimation-and-Joint-Scheduling.

Comment
Submitted to IEEE Transactions on Smart Grid

Closest papers

Nearest neighbours by meaning across the whole index.

Probabilistic Power Estimation and MPC-based Scheduling of Construction Electric Vehicles Supported by Mobile Charging Stations

eess.SY ·2026-11-16 ·Shubhan Mital, Avik Ghosh, Daniela Rojas, Sujit Dey, Yuanyuan Shi
code/data similarity 0.83
Abstract · 5 pages, 2 tables; Submitted to IEEE PESGM 2027

The adoption of construction electric vehicles (CEVs) is held back by sparse on-site charging infrastructure, limited mobility, and insufficient knowledge of their power consumption. Mobile charging stations (MCSs) towed between grid connection points and construction sites address the first barrier, yet scheduling them optimally requires an accurate estimate of the CEV power consumption. In this paper, we address these gaps, first, by estimating the power of each subactivity of a representative CEV (a compact electric excavator) based on real-world construction demonstration data. We use Bayesian linear regression to obtain the subactivity power distributions, accounting for their operational uncertainty. Second, we formulate a mixed-integer program that jointly schedules CEV work and charging together with MCS routing, charging, and discharging, optimizing electricity costs, carbon emissions, work completion, and MCS travel. We embed the optimizer in a shrinking-horizon model predictive control (MPC) loop to perform real-time control on the CEV-MCS system. Two MPC variants, one a certainty-equivalent MPC (CE-MPC) controller, and the other a scenario-based MPC (SB-MPC) controller, are compared in closed-loop against an open-loop day-ahead schedule. Realistic simulations show that SB-MPC performs the best, lowering the operating costs by $60.2\%$ relative to the open-loop baseline, and by $23.3\%$ relative to CE-MPC, demonstrating the efficacy of incorporating predictive control with feedback. The code is available at https://github.com/Shubhanflash22/CEV-MCS-MPC-Joint-Scheduling

0.21

Job Scheduling with Battery Recharging Constraints

cs.DS ·2026-10-01 ·Rudransh Kumar, Nima Nasiri, Jared Paul, Sathish Gopalakrishnan
similarity 0.59
Abstract

A battery-powered device, such as a delivery drone that works from a depot, must stop to recharge between jobs, and the time spent recharging delays every job that follows. Scheduling models that fix the duration of a recharge do not describe a device whose recharge takes longer when it acquires more energy. We study a single device that executes a batch of non-preemptive jobs with known execution times, energy demands, and optional deadlines. Under \emph{partial recharging} the device may acquire any amount of energy between jobs; under \emph{complete recharging} every recharge fills the battery. Four objectives and four relationships between execution time and energy demand give 32 variants. When acquiring $q$ units of energy takes $q$ time units, we show that 14 of the 16 partial-recharging variants are polynomial, and we give a tight 2-approximation for the average completion time, one of the two NP-hard variants. Under complete recharging, the four variants with equal energy demands are polynomial and the other 12 are NP-hard; for makespan we give a $5/4$-approximation. When each recharge also incurs a fixed \emph{setup time} $h$, the equal-energy variants remain polynomial and the other 24 are strongly NP-hard if $h$ is part of the input. For these we give exact algorithms that are exponential only in the number of jobs, and approximation algorithms for makespan and, when the battery starts empty, for the weighted average completion time. Experiments on synthetic and trace-derived job sets compare the algorithms with exact optima. The model is offline and deterministic, and we have not validated the schedules on hardware.

0.21

Synthetic Electric Vehicle Charging Session Generation Using a Conditional Variational Autoencoder

eess.SY cs.LG ·2026-09-15 ·Graeme Kelly, Emilio J. Palacios-Garcia, Barry P. Hayes
published similarity 0.58
Abstract · 5 pages, 4 figures, 4 tables. Accepted at IEEE PES Innovative Smart Grid Technologies Europe (ISGT EUROPE) 2026

The increasing adoption of electric vehicles (EVs) is expected to place significant additional demand on residential distribution networks, creating a need for realistic charging datasets for planning and simulation studies. However, access to real-world EV charging data is often limited due to privacy constraints, incomplete records, and restricted availability. This paper proposes a conditional variational autoencoder (CVAE) for the generation of synthetic EV charging sessions from real transaction-level charging data. The model is trained on engineered session features describing plug-in duration, charging duration, delivered energy, charging delay, and cyclical time-of-week, while conditioning on day of week and managed charging status. A Gaussian negative log-likelihood (NLL) reconstruction loss is employed to model feature-wise heteroscedastic uncertainty, and the latent space is regularised using a Kullback-Leibler (KL) divergence term. The statistical fidelity of the generated data is evaluated using distributional metrics and downstream task performance through the Train-on-Synthetic-Test-on-Real (TSTR) protocol. Results demonstrate that the proposed approach produces synthetic EV charging sessions that preserve key statistical properties of the original dataset while supporting predictive modelling tasks.

0.23

Analyzing Simultaneous Charging Factors of Electric Vehicles Using Monte Carlo Simulation: A Case Study in Phu Quoc City, Vietnam

eess.SY ·2026-11-04 ·Tien Khai Nguyen, Trong Nghia Le
published similarity 0.57
Abstract · 11 pages, 17 figures. Accepted for publication in GMSARN International Journal (expected in Issue 3, 2027). Author-prepared accepted manuscr…

This study estimates the simultaneous charging factor (SCF) of electric vehicles (EVs) in Phu Quoc City, Vietnam, using a Monte Carlo simulation. Three planning scenarios (2030, 2035, and 2040) are developed from population-based EV uptake assumptions and vehicle-specific charging probability profiles over 24 hours, reflecting distinct operating patterns of motorbikes, cars, taxis, and buses. For each vehicle class and scenario, 1,000 simulation runs are performed to compute SCF and its uncertainty, reported via 95% confidence intervals. Results indicate that SCF decreases as EV penetration increases, implying more temporally dispersed charging demand and a reduced likelihood of extreme coincidence. For electric buses, SCF declines from 0.76 (2030) to 0.59 (2040), and other vehicle groups show similarly decreasing trends across the horizon. These SCF estimates provide practical inputs for grid-aware charging infrastructure planning, including diversity factors for sizing distribution transformers and feeders, identifying peak-hour stress, and informing demand management measures such as time of use tariffs and basic smart charging controls.

0.68

A Behavior-Guided Online Probabilistic Forecasting Method for Electric vehicle Charging Loads

cs.AI ·2026-08-25 ·Chenghan Li, Qingxiang Liu, Yinliang Xu, Yuxuan Liang
similarity 0.57
Abstract · Submitted to IEEE

Electric vehicle (EV) charging loads exhibit strong behavioral heterogeneity and temporal variability, posing significant challenges for online probabilistic forecasting under evolving operating conditions. In particular, persistent charging patterns may differ substantially across stations, while recent behavioral changes can continuously alter the underlying load distributions. This paper proposes a behavior-guided online probabilistic forecasting framework that explicitly characterizes persistent station-specific patterns and recent behavioral changes. A dual-timescale behavior representation is constructed to distinguish long-term charging characteristics from recent behavioral states and quantify their deviations. These behavioral changes are further semantically encoded to guide drift-aware forecasting adaptation, while a delayed-feedback mechanism ensures temporally consistent online updates when observations become available across different forecasting horizons. Experiments on ten heterogeneous real-world charging stations demonstrate that the proposed method consistently outperforms conventional forecasting models and concept-drift-aware online baselines in forecasting accuracy and probabilistic reliability. For 1-h-ahead forecasting, the proposed method reduces MSE and Pinball loss by 15.3\% and 17.8\%, respectively, over the corresponding best baselines. For 4-h-ahead forecasting, the improvements further reach 16.8\% and 22.6\%, respectively, demonstrating consistent performance gains under evolving charging behaviors and extended forecasting horizons.

0.20

A High-Resolution Synthetic EV Charging Dataset for Cold-Climate Distribution Grid Impact Analysis: Trondheim, Norway (2020-2030)

eess.SY ·2026-08-31 ·Hanieh Taraghi Nazloo, Petr Musilek
benchmark similarity 0.56
Abstract · 10 pages, 4 figures, 2 tables. Dataset available on Zenodo: DOI 10.5281/zenodo.22132618

This data article presents a high-resolution, long-term synthetic electric-vehicle (EV) charging dataset for Trondheim, Norway, spanning February 2020 to December 2030. Empirically grounded in 14 months of historical charging logs from December 2018 to January 2020, the dataset captures session-level behavioral patterns, including delivered energy, plug-in duration, connection schedules, user categorization (private vs. shared), seasonal variations, public-holiday effects, and daily ambient temperature dependencies. To model future electrification dynamics, the synthetic generation pipeline integrates historical session records, calendar and weather features from MET Norway, annual EV-adoption growth multipliers derived from Statistics Norway (SSB) registration trajectories, a daily session-count model, a Conditional Tabular Generative Adversarial Network (CTGAN), seasonal Kernel Density Estimation (KDE), and post-generation physical charger-power feasibility correction. Under a standardized 7.2 kW AC charging constraint, the resulting medium EV-adoption scenario dataset contains 76,993 hourly charging-activity records. The hourly profile is activity-based rather than a complete continuous hourly time series; hours with no allocated EV charging energy are not included. The records provide total hourly charging energy, equivalent average charging power, active session counts, private/shared user load breakdowns, ambient temperature features, and calendar indicators. The dataset provides a validated cold-climate benchmark for distribution-grid impact assessment, transformer-loading analysis, EV charging-demand forecasting, charger-capacity planning, energy-management optimization, and the development of data-driven smart-charging control strategies.

0.18

Energy Vision--Language--Action: A Controlled Multimodal Benchmark for Intent-Conditioned Residential Energy Management

cs.LG cs.AIeess.SY ·2026-09-13 ·Lyes Saad Saoud, Oualid Doukhi, Ehsan Reihani, Saeed Sepasi, Deok Jin Lee +2 more
benchmark similarity 0.56
Abstract

Vision-Language-Action (VLA) models are studied mainly in robotics, where visual observations and language instructions are mapped to physical actions. This paper introduces Energy Vision-Language-Action (EVLA), a controlled multimodal benchmark for intent-conditioned residential energy management. EVLA frames battery scheduling as a multimodal trajectory-prediction problem in which an RGB energy-field representation, a numerical operating state, and a natural-language objective are mapped to a 16-step battery-action trajectory generated by a finite-horizon sampling-based reference generator. Source windows are derived from public residential electrical-load data, while electricity price, battery state of charge, indoor temperature, and time of day are generated benchmark metadata. A hidden operating regime is encoded only through energy-field texture, enabling paired visual changes while the explicit numerical state is fixed. Crossing 439,203 retained base windows with three hidden regimes and five language objectives yields 6,588,045 multimodal instances. An initial study evaluates 36 configurations over three training seeds using fixed subsets of 5,000 training, 500 validation, and 500 test instances. In the MobileNet-family comparison, removing processed language increases trajectory mean-squared error from 0.3856 +/- 0.0039 to 0.8628 +/- 0.0001, whereas removing vision yields 0.3843 +/- 0.0013, comparable to the full model. The results show strong asymmetry in modality use: the processed-language pathway is strongly associated with prediction quality, while the current RGB pathway provides no aggregate error advantage. These results characterize the fixed pilot subset and executed protocol rather than full-benchmark training. EVLA provides a controlled setting for studying how semantic intent and latent context influence residential energy-action prediction.

0.21

Conditional Diffusion Models for Energy-Efficient Driving

cs.LG ·2026-08-28 ·Hemanth Neelgund Ramesh, André Snoeck, Chyi-Fu Hong, Shijing Sun
similarity 0.55
Abstract

Electrification of commercial delivery fleets is shifting fleet routing from distance- and time-based optimization toward energy-aware decision-making. Existing sequence models primarily provide deterministic point estimates or limited uncertainty summaries, which do not capture the range of plausible energy-consumption trajectories required for operational decision-making. In this work, we introduce a conditional diffusion framework that generates EV battery-current profiles conditioned on route features such as vehicle velocity and ambient temperature. The model combines a latent conditioning encoder with a temporal 1D U-Net denoising backbone that enables trip-related conditions to be mapped into a shared representation and guides the reverse diffusion process. We evaluate the framework on an open-access commercial EV telemetry dataset containing 12k trips from 9 vehicles. The proposed latent-conditioned diffusion model generates realistic cur- rent trajectories that capture both the dominant temporal envelope and sharp transient events. The model achieves a Wasserstein distance of 0.0029 between generated and measured current distributions below the real vs real reference distance of 0.0085 indicating that generated samples lie within the empirical variability of the test set. We further demonstrate that learned latent conditioning substantially improves performance over direct condition injection, reducing the Wasserstein distance by 89.1% and MAE by 52.8%. This work demonstrates a generative modeling framework for characterizing EV energy consumption under real-world operating conditions, providing an essential foundation for uncertainty-aware fleet planning in large-scale operational settings.

0.18