CS Paper Radar

LF-GICP: Parameter-Free Degeneracy-Aware LiDAR Odometry via a Voxel-Normal Localizability Field

Eunsoo Im

cs.RO cs.CV ·submitted 2026-08-20 00:36 UTC · v1

Abstract

Scan-to-map LiDAR odometry drifts unboundedly along the unobservable axes of geometrically degenerate environments like tunnels and corridors, and existing degeneracy handling requires environment-specific parameter tuning. This paper presents a parameter-free approach. We show that in voxelized GICP the Gauss--Newton (GN) Hessian masks translational degeneracy, because covariance regularization keeps the translation block artificially well-conditioned. We bypass this with a regularization-free voxel-normal localizability field and two of its statistics: a normalized fraction $f_0$ detecting directional anisotropy, and an absolute per-voxel mass $λ_0$ distinguishing information absence (tunnels) from dilution (dense open scenes). A temporal-median gate combines both to trigger Fisher-information correspondence weighting. Calibrated once by fixed rules on two short sequences and then frozen, LF-GICP achieves the lowest KITTI relative translation error ($0.865\%$) under an identical evaluation protocol against re-run baselines, outperforms them on GEODE tunnels and MulRan, leads the HeLiPR mean, and generalizes across four sensor types without re-tuning. We further demonstrate empirically that straight, uniform tunnels remain unobservable along their axis for LiDAR-only registration.

Closest papers

Nearest neighbours by meaning across the whole index.

Polis: 3D Self-Supervision at City Scale

cs.CV cs.AIcs.LG ·2026-08-29 ·Alexander Rusnak, Sophia Kovalenko, Jingru Wang, Ismail Moudden, Xiru Wang +1 more
benchmark similarity 0.70
Abstract

Reliable semantic representations derived from city-scale 3D models are increasingly important for urban analysis, infrastructure monitoring, autonomous systems, and heritage conservation. However, urban scenes of large spatial extent captured through aerial surveying differ substantially from the indoor, object-level, and self-driving LiDAR data used to pretrain most 3D self-supervised models. We introduce Polis, to our knowledge the first application of Sketched Isotropic Gaussian Regularization (SIGReg) as an objective for a native point cloud encoder, and evaluate it through a frozen-feature benchmark spanning fourteen city- and building-scale corpora. Polis combines geometrically matched cosine invariance, SIGReg, and VICReg-style anti-collapse terms with a 12.8k-scene outdoor pretraining mixture and gravity-preserving spatial view sampling. Controlled ablations show that this objective outperforms student--teacher architecture alternatives, as well as Polis versions without anti-collapse terms, on the same representative outdoor corpus. On three pretraining-disjoint city datasets, Polis reaches $23.8\%$ mean mIoU versus $16.3\%$ for the next-best encoder under high-capacity frozen probing, and $17.3\%$ versus $16.1\%$ at a matched point and voxel budget. The same city-scale lead holds on datasets whose training sets were seen in pretraining. On localized terrestrial captures with fine-grained facade and streetscape labels, the ranking reverses. Our results show that distributionally-regularized joint embedding architectures can be successful on challenging city-scale 3D scenes, and that transfer improves when self-supervision is designed for the capture geometry and spatial context of this domain while also revealing the limits of this specialization.

0.36

Transformer-based Monte Carlo Localization in Construction Meshes

cs.RO ·2026-09-25 ·Linus Kramer, William Talbot, Olga Vysotska, Marco Hutter
similarity 0.68
Abstract

To be able to perform inspection or digitization tasks, mobile robots on construction sites must be able to localize themselves reliably with respect to a global reference frame that is shared with a building map. Similar room layouts and low-texture surfaces pose a challenge for existing LiDAR- and vision-based localization methods. We approach this problem with a LiDAR-based global relocalization system that estimates the robot's pose relative to a building mesh and combines a PointNet++ encoder with a place recognition decoder, whose outputs serve as a learned observation model within a Monte Carlo Localization (MCL) framework. The pipeline is trained exclusively on synthetic LiDAR scans obtained by simulating the robot's sensors inside the building mesh. Our approach is robust in ambiguous environments due to an uncertainty-aware decoder that scales positional likelihoods and a resampling strategy that injects model hypotheses into the particle set, enabling recovery from potential particle depletion. Evaluations on real-world datasets show that our method outperforms both diffusion-based and ScanContext++ baselines while maintaining fast inference (18 ms per call), demonstrating the practicality of synthetic-data training for mesh-referenced global localization in construction robotics.

0.18

ELiCv2: Learned LiDAR Geometry Compression under Real-Time Embedded Constraints

eess.IV ·2026-11-03 ·Soowoong Kim, Junsik Kim, Gun Bang, Jinsoo Choi
similarity 0.67
Abstract

Improving learned LiDAR compression increasingly relies on heavier inference, making it harder to meet the constraints of real-time embedded systems. We present ELiCv2, which removes two sources of redundant computation in progressive coding. Its discrete entropy interface selects a precomputed integer CDF instead of materializing one from a per-voxel distribution, while its occupancy-driven kernel-map builder derives finer-level sparse-convolution kernel-maps directly from the decoded hierarchy, eliminating coordinate-based neighbor search. ELiCv2 reinvests the recovered computation budget in lightweight ego-motion-aware temporal conditioning that gathers local occupancy context from the aligned previous reconstruction. On four LiDAR datasets and an NVIDIA Jetson Thor, ELiCv2 achieves a mean BD-rate reduction of 30.97% over G-PCC with channel width C=32 while sustaining the 20Hz nuScenes capture rate. Increasing the channel width to C=64 improves the mean reduction to 35.22%.

0.26

GLIO2: A GPU-Parallelized Tightly-Coupled LiDAR-Inertial-GNSS System for Robust and Real-Time Global Localization and Mapping

cs.RO ·2026-10-08 ·Qi Zhang, Xikun Liu, Qijun Qin, Xiangru Wang, Junzhe Wang +3 more
similarity 0.67
Abstract · 23 pages, 16 figures, 8 tables; includes appendices

Globally consistent, real-time state estimation in large-scale, perceptually degraded environments is essential for autonomous vehicles and aerial robots, and requires fusing LiDAR, inertial, and GNSS measurements. Existing fusion methods, however, share a scan-to-map front-end with two failure modes. First, each scan is aligned to an incrementally built map that drifts under degeneracy, and once the estimate diverges the error is irrecoverable. Second, even without divergence, a registration biased by dynamic objects or wrong correspondences is propagated as a single pose constraint with an over-confident covariance, leaving its correspondences unavailable for GNSS to re-weight or relinearize. We propose GLIO2, a tightly-coupled LiDAR-Inertial-GNSS system whose GPU-parallel front-end jointly optimizes scan-to-multiscan LiDAR, IMU pre-integration, and raw GNSS measurements in a single sliding-window factor graph, sustaining real-time operation on edge hardware. A complementary offline back-end reuses the same cached factors to refine the entire trajectory in batch, completing the 30-min, 4.51-km UrbanNav Whampoa sequence in about 24 s. Across three public benchmarks (UrbanNav, MARS-LVIG, M3DGR) and self-collected UAV and vehicle data, GLIO2 attains the best overall accuracy among evaluated systems. On a 5.66-km bridge traversed at up to 96 km/h, where every competing baseline diverges under LiDAR degeneracy, it maintains 1.6 m horizontal accuracy. On an NVIDIA Jetson Orin NX, the full pipeline runs at about 25 Hz (39.60 ms per scan). The source code and datasets will be released.

0.21

DASH-SLAM: Calibration-Free Metric Monocular SLAM via Depth Scale Propagation

cs.RO ·2026-11-06 ·Otavio Ribas, Jacopo Panerati, Pierre-Yves Lajoie
similarity 0.66
Abstract

Geometric foundation models estimate dense geometry and camera parameters from monocular images, but reliable SLAM also requires consistent scale and accurate data association across successive reconstructions. We present DASH-SLAM, a monocular SLAM system that integrates metric depth predictions from pretrained Depth Anything 3 into a shared-keyframe pose graph without task-specific fine-tuning. DASH-SLAM derives scale corrections from depth ratios at shared anchor images and accumulates them across reconstructions, with a damping factor controlling their influence. These corrections rescale odometry translations, loop constraints, and map geometry. Experiments on TUM, Replica, and 7-Scenes show that DASH-SLAM outperforms state-of-the-art methods. We evaluate performance using both rigid and similarity alignment to distinguish metric-scale fidelity from accuracy up to scale. We further evaluate DASH-SLAM on four challenging sequences in perceptually-degraded environments from the Unified Autonomy Stack field dataset, covering tunnels, fog, and a frozen lake. On these sequences, DASH-SLAM outperforms the foundation-model SLAM state-of-the-art and maintains tracking where classical SLAM methods fail.

0.21

SynCalib: Breaking Dataset Shortcuts in LiDAR-Camera Calibration via Extrinsic-Controllable Synthesis

cs.CV cs.RO ·2026-10-20 ·Huihua Zhu, Shuyang Zhang, Dongqing Chen, Zhuo Yu, Jianhao Jiao +4 more
benchmarkcode/data similarity 0.66
Abstract · 8 pages, 6 figures

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable data generation framework tailored for training LiDAR-camera calibration networks. Our framework leverages existing omnidirectional image datasets annotated with depth ground truth to synthesize multi-modal calibration data under rigorous extrinsic constraints. Extensive experiments demonstrate that the data generated by our pipeline significantly enhances the generalization and robustness of typical learning-based calibration networks. Furthermore, we conduct comprehensive real-world evaluations across various camera-LiDAR configurations, validating the zero-shot transfer capability of models trained exclusively on our synthetic data. To facilitate future research and community use, the code for data generation, the pre-trained models, and online benchmark datasets will be made publicly available.

0.25

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.66
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22

Temporal-Aware Fusion for Robust Outdoor LiDAR Localization

cs.CV ·2026-09-29 ·Minghang Zhu, Zhijing Wang, Yuxin Guo, Chen Liu, Yongshu Huang +3 more
top venue similarity 0.66
Abstract · 10 pages, 8 figures, 6 tables, conference

LiDAR relocalization aims to estimate the global 6-DoF pose of a sensor in the environment. However, existing regression-based approaches often encounter limitations in dynamic or ambiguous scenarios, as they typically prioritize single-frame inference, leaving the potential of spatio-temporal consistency across scans not fully explored. In this paper, we propose a Temporal-aware Localization framework (TempLoc) designed to enhance the robustness of outdoor localization by effectively modeling sequential consistency. Specifically, a Global Coordinate Estimation module is first introduced to predict point-wise global coordinates and associated uncertainties for each LiDAR scan. A Prior Coordinate Generation module is then presented to estimate inter-frame point correspondences by the attention mechanism. Lastly, an Uncertainty-Guided Coordinate Fusion module is deployed to integrate both predictions of point correspondence in an end-to-end fashion, yielding a more temporally consistent and accurate global 6-DoF pose. Experimental results on the NCLT and Oxford RobotCar benchmarks show that our TempLoc outperforms state-of-the-art methods by a large margin, demonstrating the effectiveness of temporal-aware correspondence modeling in LiDAR relocalization.

0.30