CS Paper Radar

An end-to-end differentiable transient vapor-compression framework for automated machine sizing and unified optimal control

Sam Yang

eess.SY cs.CEphysics.app-ph ·submitted 2026-08-20 01:35 UTC · v2
code/data

Abstract

Accelerating the electrification of thermal energy requires vapor-compression heat pumps capable of dynamic, grid-responsive operation. However, equipment engineering remains fragmented across static rating-point selection, stiff multi-phase transient simulation, and gradient-based optimal control. Here, we present an end-to-end differentiable, finite-volume vapor-compression framework implemented natively in JAX that automates machine sizing directly from stated thermal duties and unifies dynamic simulation with predictive control under a single compiled residual $\dot{y}={f}(t,{y},{u})$. Thermodynamic evaluations bypass runtime root-finding via bilinear $(p,h)$ manifolds pre-flashed from Helmholtz equations of state, enabling analytical forward-mode automatic differentiation. Mass conservation across multi-phase coils is strictly preserved by incorporating both $(\partialρ/\partial p)_h$ and $(\partialρ/\partial h)_p$ partial derivatives into the dynamic pressure differential equation. The sizer directly inverts compressor displacement, electronic expansion valve area, and heat-exchanger tube counts via four-point cycle synthesis and $\varepsilon$-NTU matching using the identical polytropic compressor map. Crucially, the compiled physics kernel is shared symmetrically between $L$-stable TR-BDF2 stiff integration and implicit-Euler Model Predictive Control (MPC), eliminating plant-controller surrogate mismatch. Validated against open-access experimental benchmarks without parameter fitting, the framework predicts cooling capacity with $7.37\%$ MAPE across 16 mini-split operational runs and bounds on-period cooling error within $1.19\%$--$1.62\%$ on utility-scale Hardware-in-the-Loop traces. This work provides an open-source, differentiable foundation for automated machine synthesis, dynamic grid orchestration, and gradient-based hardware-control co-design.

Comment
the paper is not novel enough; need further investigation

Closest papers

Nearest neighbours by meaning across the whole index.

Discontinuity-Aware Solvers for Vapor-Compression Cycles

cs.MS math.NA ·2026-11-15 ·Shreyas Ekanathan, Avinash Subramanian, Oscar Smith, Yingbo Ma, Christopher Rackauckas +1 more
code/data similarity 0.56
Abstract

Physics-based models of vapor-compression cycles are often formulated as large, stiff DAE systems with derivative discontinuities introduced at the points of phase change. We use an implementation of a discontinuity-aware ODE and DAE solver scheme that uses domain-specific, user-declared information to compute appropriate time steps for more efficient integration. This scheme is made open-source within Julia's DifferentialEquations package. We demonstrate how discontinuity information can be specified symbolically in a declarative modeling language such as Dyad and passed to the solver to address the numerical challenges posed. We apply this discontinuity-aware technique to two applications: first, a scalar ODE with two discontinuities, and then a model of a full vapor-compression cycle. The discontinuity-aware solver yields significantly fewer step rejections and improved solver times, particularly with the Rodas5P solver at loose tolerances, as compared to standard error control, suggesting that exposing physical discontinuity information from equation-oriented models to adaptive solvers can improve practical simulation performance without requiring reassembly of the model.

0.47

Torch-DPhys: A Torch-Native, MOOSE-Compatible Framework for Differentiable Physics Simulation and Hybrid Machine Learning Integration

cs.LG ·2026-10-16 ·Akzhol Almukhametov, Yang Liu
similarity 0.56
Abstract

We present Torch-DPhys, a Torch-native framework implemented in PyTorch for differentiable physics simulation and hybrid physics-machine learning. It implements selected thermal-hydraulic modeling concepts and discretizations from MOOSE's Thermal Hydraulics Module and the System Analysis Module (SAM), with a preliminary extension to continuum mechanics. Native tensor residuals support CPU and GPU execution, compilation of selected numerical kernels, and sparse direct linear solves. Sensitivities are obtained by differentiating executed numerical operations or through discrete adjoints of converged residual equations. Verification combines analytical solutions, reference-code comparisons, and derivative checks. Demonstrations cover plane-strain elasticity, one- and two-loop thermal-hydraulic transients, and an axisymmetric molten-salt fast reactor. For the reactor, comparison with SAM-Lite gives a maximum normalized field discrepancy of 1.13 x 10^-5 over 200 adaptive time steps, demonstrating agreement between the tested discrete implementations. Selected transient sensitivities are assessed using tangent-linear calculations and finite differences on fixed time schedules. Two applications illustrate the framework's connection between simulation and optimization. A residual-adjoint parameter-identification calculation recovers nominal pump head and heating power with relative errors below 0.06% from noiseless synthetic MOOSE observations. A separate three-loop plant demonstration uses solver-in-the-loop training of a predictive controller by differentiating trajectory-level objectives through the thermal-hydraulic simulation. These examples illustrate a foundation for gradient-based inference, control, and coupled physics-machine learning models in nuclear engineering.

0.41

Optimal Coordination of Heat Pump Demand Flexibility and Battery Energy Storage Considering the Operation of Distribution Networks

eess.SY ·2026-10-06 ·Gustavo L. Aschidamini, Guilherme S. Castiglio, Mariana Resener
similarity 0.53
Abstract

Electrifying space heating with heat pumps (HP) and backup electric-resistance heaters (ERH) is incentivized to support decarbonization but increases voltage and thermal issues in distribution networks. Direct load control (DLC) of smart thermostats (ST) provide grid support, yet, to the best of our knowledge, existing methods do not co-optimize this flexibility with grid-scale battery energy storage systems (BESS) and voltage-regulation devices, and do not use ERH for preheating, limiting peak demand reduction and undervoltage mitigation. We propose a mixed-integer linear programming (MILP)-based model predictive control (MPC) framework that coordinates ST setpoints for preheating and setback, grid-scale BESS, on-load tap changers, switched capacitor banks, and step voltage regulators. The framework is evaluated on 23-node and 733-node distribution networks, including a real-data-based feeder, across multiple realized days. On the 23-node feeder with 50% HP penetration and 50% DLC participation, the proposed framework reduces the feeder peak by 23.1%, and by 27.1% with the co-optimized BESS. Rolling-horizon setpoint optimization contributes 6.5 percentage points beyond a day-ahead ST schedule (16.6%), and dispatching the ERH for preheating adds 2.7 percentage points beyond backup-only operation (20.4%). On the 733-node feeder, where thermal congestion is the binding constraint, the framework reduces overloaded branches by 94% and overloaded transformers by 47%. These results demonstrate the potential of coordinated demand flexibility and voltage regulation to accommodate heating electrification.

0.12

ADACT: PDE-Constrained Thermal Hardware/Software Co-Design Adjoint-Driven Optimal Control via Finite Difference Discretization

cs.AR math.OCeess.SYmath.NA ·2026-10-26 ·Don Li
similarity 0.53
Abstract

By virtue of the sheer compute demands of large-scale artificial intelligence (AI) and high-performance computing (HPC), modern multi-core microprocessors suffer from severe power density limits and thermal throttling, entailing an urgent need for principled methods for predictive, physics-informed dynamical thermal management (DTM). Here, we introduce a hardware/software co-design physics-informed PDE-constrained DTM throttling optimal control algorithm, ADACT (Adjoint-Driven Adaptive Co-Design Thermal Control), that minimizes thermal risk and cooling energy overhead while maximizing core execution throughput. The underlying physical temperature field is governed by a two-dimensional nonhomogeneous parabolic reaction-diffusion equation with spatially localized, time-varying power source terms and variable convective cooling subject to nonhomogeneous Dirichlet boundary conditions. We employ a discretization of the continuous state PDE via a Crank-Nicolson finite difference scheme with a 5-point discrete Laplacian operator on a uniform spatial mesh, which preserves unconditional numerical stability and $O(Δx^2 + Δy^2 + Δt^2)$ second-order temporal and spatial accuracy. To efficiently compute exact gradients, we construct and implement a continuous backward-in-time adjoint state method with L-BFGS as our optimization algorithm of choice. The accuracy and second-order convergence rates of both forward state and backward adjoint solvers are quantitatively verified via the Method of Manufactured Solutions (MMS), and gradient accuracy is validated using directional derivative Taylor tests. Numerical experiments demonstrate that ADACT dynamically throttles software power workloads and modulates hardware cooling efforts to strictly uphold physical thermal thresholds while maintaining operational throughput.

0.28

Retrofitting centralized air compressor stations with end-use-aware predictive set-pressure control using a physics-constrained pressure-drop model

eess.SY ·2026-10-27 ·Taito Watanabe, Yohei Kono, Akira Iyozumi, Takashi Nakajima
similarity 0.52
Abstract · 31 pages, 17 figures

Compressed air systems usually run at a constant set pressure well above the end-use requirement; the excess margin is wasted energy. A lightweight hierarchical nonlinear model predictive control (NMPC) scheme, retrofitted to the sequencing controller of a centralized compressor station typical of small and medium-sized plants, lowers the set pressure as far as the end-use requirement allows. It uses only two pressure gauges (receiver and one critical end-use point) and compressor data, without flow meters or piping surveys. The end-use pressure is predicted by a low-order pressure-drop model identified by least squares under stability, damping and steady-state equilibrium constraints, which serve use rather than accuracy: they let the measured pressure drop be held over the horizon with unit gain. Validated in three stages (plant data, a pipe-network simulator checked against measurements, and the actual controller, at most 1.41 s per update), the NMPC meets the required pressure under real demand and reduces the estimated annual energy consumption by 2.8 % relative to the current constant operation (9.3 % relative to 0.70 MPa). A PID cascade with the same gauge saves about as much only when tuned by a standard rule at its recommended setting from a constant-load step test, difficult in an operating plant; the NMPC needs no such test and keeps its performance with its initial model and default weights after plant expansion and network split. The margin becomes a design parameter instead of a fixed excess, and the controller's signals show where the supply system lacks headroom.

0.33

Model Predictive Control of Heating Systems via Koopman-Operator Bilinearization

eess.SY ·2026-11-02 ·Paula Chanfreut, Erfan Shakhesi, Mircea Lazar, Maurice Heemels
similarity 0.51
Abstract

Hydronic heat emitters are widely used in buildings, but their control is challenging due to nonlinear dynamics, arising from both the heat transfer in each emitter and the hydraulic coupling among those that share a circulating pump. These nonlinearities are often simplified or neglected in the literature. In this paper, we use Koopman theory to make the resulting model more tractable for control. In particular, we propose an input reparameterization and construct an infinite-dimensional set of observables that yields an exact bilinear representation of the system in the chosen lifted space. We then show that truncating the infinite-dimensional representation leads to bounded approximation errors that decrease as the truncation order increases, as well as bounded trajectory deviations over a finite horizon. The resulting bilinear model is incorporated into a model predictive control (MPC) framework to provide thermal comfort in multi-zone buildings while reducing energy use. Using a numerical case study of a five-story building with 20 zones, we show that the proposed Koopman-based MPC achieves a realized performance cost close to that of nonlinear MPC with faster solve times, and outperforms MPC formulations based on time-invariant and time-varying linearizations.

0.27

Koopman-Based Model Predictive Control for Simultaneous State of Charge and Temperature Balancing of Lithium-Ion Cells

eess.SY ·2026-09-07 ·Jihoon Moon
similarity 0.50
Abstract

Cell-to-cell electrical and thermal variations produce nonuniform state of charge (SoC) and temperature distributions in lithium-ion battery packs. This paper proposes a Koopman-operator-based framework for simultaneous SoC and temperature balancing of series-connected cells. Cell-specific Koopman predictors identified using extended dynamic mode decomposition are assembled into neighboring-cell error dynamics that retain heterogeneity and thermal-disturbance effects. A Tikhonov-regularized feedforward controller provides numerically robust compensation without excessive current amplification, while constrained Koopman-based model predictive control (KMPC) regulates the residual errors through a convex quadratic program. Three-cell simulations validate the controller under two consecutive Urban Dynamometer Driving Schedule cycles. KMPC achieves balancing performance comparable to nonlinear model predictive control (NMPC). Relative to the uncontrolled case, KMPC reduces the RMSEs of the neighboring-cell SoC and core temperature differences by 66-81% and 57-76%, respectively, while reducing the computation time per optimization from 0.0259s for NMPC to 0.0028s for KMPC.

0.31

Learning Implicit Solves for Dynamic Simulations

cs.LG cs.CE ·2026-11-03 ·Chawit Kaewnuratchadasorn, Jiaji Wang, Xin Nie
similarity 0.49
Abstract

High-fidelity simulation of dynamical systems is central to scientific discovery and engineering design, yet remains computationally demanding. Here we introduce the Implicit Neural Operator Solver (INOS), which learns the implicit solve and encodes a time integrator. INOS pretrains a neural operator from static equilibrium solutions and reuses it within Newmark-$β$ integration. At each time increment, the integrator forms an effective equilibrium problem, the pretrained neural operator infers the next-step solution field, and the Newmark relations advance the dynamic state. Numerical examples in linear and nonlinear elastodynamics demonstrate accurate full-field predictions without dynamic trajectory supervision. Comparative results show that INOS, evaluated zero-shot, achieves higher predictive accuracy than neural solver baselines trained on dynamic simulations. In addition, INOS delivers over 4,600$\times$ speedup in nonlinear simulations over sequential classical finite-element solvers. INOS natively accommodates changes in dynamic conditions and enables reuse of the pretrained operator across spatial and temporal discretizations. Further evaluation demonstrates a stable million-step rollout. These findings establish INOS as a reusable neural implicit solver for accurate, efficient, and robust dynamic modeling.

0.27