CS Paper Radar

New Complexity Results for Fair Repetitive Scheduling

Moran Koren, Michael L. Pinedo, Dvir Shabtay

cs.DS ·submitted 2026-08-20 12:17 UTC · v1

Abstract

We revisit the problem of finding fair solutions to repetitive scheduling problems with a single machine. In this problem, we are given a set of $n$ clients and a planning horizon consisting of $q$ periods (days). Each day, every client submits a single job that must be processed by the machine. The objective is to construct a set of $q$ schedules, one for each day, such that the quality of service (QoS) received by each client meets a predefined threshold. The QoS measure may be any standard scheduling criterion, such as the total waiting time or total completion time of a client's jobs over the entire planning horizon. This problem has been studied in the literature, with previous works providing complexity classifications and approximation algorithms for various QoS measures. Nevertheless, several important questions remain open. In this paper, we resolve three of these questions and identify several additional directions for future research.

Comment
12 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Fair Division Meets Scheduling: Approximately Envy-Free Interval Scheduling

cs.DS cs.GT ·2026-08-15 ·Sander Borst, Golnoosh Shahkarami, Rohit Vaish
benchmarktheory similarity 0.62
Abstract

We study interval scheduling from the perspective of fair allocation. There are $m$ identical machines and a set of intervals, each specified by a start time, an end time, and a nonnegative weight. A schedule assigns a subset of the intervals to the machines so that no two intervals on the same machine overlap, and the goal is to maximize the total weight of scheduled intervals. Viewing machines as agents and intervals as goods, we require the schedule to be envy-free up to one item (EF1), and we measure efficiency against the offline optimum without fairness. In the offline setting, we give an algorithm that computes an EF1 schedule whose loss is at most a factor of $3/2$ in the unweighted regime, and we prove lower bounds of $\frac{3m-2}{2m-1}$, approaching $3/2$, in both the unweighted and the unit-length weighted regimes, so the price of fairness is $3/2$ in the limit. In the online setting, intervals arrive in nondecreasing order of start times; an arriving interval must be accepted or rejected, rejections are irrevocable, and an accepted interval may be revoked, and lost, at any time before it ends. For the unweighted regime we present Greedy-Balanced, a simple algorithm that maintains EF1 at every point in time and is $(2-\tfrac{1}{m})$-competitive against the offline optimum without fairness, and we prove a matching lower bound for every deterministic algorithm; the optimal deterministic fair competitive ratio is thus exactly $2-\tfrac{1}{m}$. Experiments on real-world benchmark instances show that Greedy-Balanced performs well beyond its worst-case guarantee, with an observed ratio never exceeding $1.306$.

0.38

Scheduling with Mandatory Breaks: NP-Hardness and an Additive-One Approximation

cs.DS ·2026-09-28 ·Shreyas Ghildiyal, Muralidhara V N
similarity 0.61
Abstract

In classical fixed-interval scheduling, each job of a given set must be processed during a prescribed time interval. The goal is to assign each job to exactly one machine such that no two jobs assigned to the same machine overlap in their interiors, and the number of machines used is minimized. Without further constraints this is interval graph coloring and is solvable in polynomial time through greedy approaches. We study a variant in which every used machine must remain idle during a contiguous \emph{break} of prescribed length $x$ somewhere in the scheduling horizon. We show that this additional constraint makes the problem hard, except when $x\le1$. First, for every fixed $x\ge2$, deciding whether $k$ machines suffice for the assignment of a given set of jobs is NP-complete, even when all coordinates are bounded linearly in the number of jobs, so machine minimization is strongly NP-hard. Second, for $x=1$, we give a polynomial-time algorithm that solves the problem exactly. Finally, we give a deterministic polynomial-time algorithm that, on every feasible instance, outputs a schedule using at most $\OPT+1$ machines, where $\OPT$ is the true minimum. Unless $\mathrm{P}=\mathrm{NP}$, no polynomial-time algorithm guarantees $\OPT$ machines for any fixed $x\ge2$, so the additive guarantee of one is best possible.

0.07

Whittle index approach to multi-server scheduling with convex delay costs and impatient customers

cs.PF math.PR ·2026-09-17 ·Samuli Aalto
similarity 0.61
Abstract

We consider the dynamic scheduling problem in a multi-class M/G/N + M queue with convex delay costs and impatient customers that have exponential abandonment times. We apply the Whittle index approach to find a reasonable heuristic solution for this tricky problem. By assuming exponential abandonment times, we are able to make a very straightforward use of the results of the corresponding problem with patient customers presented in Queueing Systems, Vol. 110, Article no. 2, 2026. Our main theoretical achievements are proving that the closed version of the corresponding discrete-time problem is indexable and deriving an explicit expression for the Whittle index. The discrete-time results are utilized to develop the Whittle index policy for the original continuous-time scheduling problem.

0.24

A QPTAS for Stochastic Scheduling of Bernoulli Jobs

cs.DS cs.CCmath.OC ·2026-10-08 ·Junho Hwang
benchmark similarity 0.61
Abstract · 23 pages, 1 figure

We study the classical problem of scheduling jobs with random processing times on $m$ identical machines to minimize the expected sum of completion times, for Bernoulli jobs: job $j$ takes time $p_j$ with probability $q_j$ and time $0$ otherwise, and its outcome is revealed when it starts. The benchmark is an optimal adaptive policy. We give a quasi-polynomial-time approximation scheme for every number of machines. Previously, quasi-polynomial time was known to give an $O(\log N)$-approximation, and approximation schemes were known only for a constant number of distinct sizes. The scheme rests on a simple observation: it suffices to round the times at which machines become free, rather than the times at which jobs start, to a grid whose width is proportional to the job size, and an optimal policy stretched by a factor close to one already respects such grids. We also show that every policy that fixes the order of the jobs in advance loses a factor $Ω(\log N)$, already on two machines, so a constant factor requires adapting the order to the observed outcomes. Further results include a polynomial-time adaptive rule with ratio $\min\{m,1+\sum_j q_j\}$, a simpler approximation scheme for a constant number of sizes, and #P-hardness of computing the optimal expected cost on two machines.

0.25

An EPTAS for Vector Scheduling with Time Intervals

cs.DS cs.CC ·2026-09-27 ·Junho Hwang
theory similarity 0.60
Abstract · 18 pages, 4 figures. v2: extended to several resources and unrelated machines, with a new title and simplified proofs

We study vector scheduling in which each job is active during a fixed time interval. A job uses several resources and stays on one machine for its entire interval; its resource requirements may depend on the machine. The objective is to minimize the largest resource load over all machines and times. For $r$ machines and $d$ resources, we give a deterministic $(1+\varepsilon)$-approximation in $f(r,d,1/\varepsilon)N^{O(1)}$ time, where $N$ is the binary input length. This gives an efficient polynomial-time approximation scheme for fixed $r$ and $d$, extending approximation schemes for scalar temporary tasks assignment. The algorithm merges jobs into blocks whose time intervals are fixed before any machine is chosen, and assigns the blocks by dynamic programming over a balanced recursive split of the time line. We also prove strong NP-hardness and an exponential lower bound in $1/\varepsilon$ under the Exponential Time Hypothesis, already for two identical machines and one resource.

0.13

Scheduling to Maximize Weighted Throughput with an Active-Time Budget

cs.DS ·2026-08-29 ·Susanne Albers, G. Wessel van der Heijden
publishedtheory similarity 0.60
Abstract · 16 pages, 5 figures, To appear at WAOA 2026

We study the active-time scheduling problem with weighted throughput maximization. In this setting, a set of $n$ jobs $J$ arrive at integer release times, each with an integer processing time and integer deadline. Jobs may be preempted at integer time slot boundaries. A schedule assigns jobs to time slots, with at most $m$ jobs assigned to the same time slot. A slot is called \emph{active} if at least one job is scheduled in it. Instead of scheduling all jobs to minimize the number of active time slots, we consider the more general variant of \emph{weighted throughput} with an active-time budget $K$, where each job $j\in J$ has a weight $w_j$. The objective is to maximize the total weight of \emph{completed} jobs using at most $K$ active time slots. This means that partially scheduled jobs do not count towards the objective. The classical active-time minimization problem is recovered by asking whether all jobs can be completed within a given active-time budget. We give hardness, approximation, and exact algorithmic results. For general intervals with unbounded parallelism, we prove NP-hardness, rule out an FPTAS unless $\mathrm{P}=\mathrm{NP}$, and give a pseudo-polynomial time $Ω(1/\log K)$-approximation. For proper intervals, we prove a canonical structural lemma and obtain an exact $(nK)^{O(m)}$-time algorithm. For laminar intervals, we give an exact $f(K,m)\cdot n^{O(1)}$-time algorithm.

0.25

Speed-Robust Scheduling for Total Completion Time

cs.DS cs.DM ·2026-11-16 ·Moritz Buchem, Nicole Megow, Morten Weber
similarity 0.60
Abstract

We study two-stage speed-robust scheduling for minimizing total completion time. Jobs must be partitioned into $M$ bags before an adversary reveals the speeds of at most $M$ machines. Each bag is then assigned to one available machine, and the jobs on each machine may be processed in any order independent of the bags. We compare with an optimal schedule that knows the speeds in advance and assigns jobs individually. This model has been studied for makespan minimization. We initiate its study for total completion time, as suggested by Stein and Zhong (TALG 2020). For an unknown number of identical machines, we show that the optimal deterministic robustness factor is exactly~$13/12$, both for unit-size jobs and for arbitrary processing times. For infinitesimally small jobs, the factor lies between $31/30\approx1.0333$ and $28/27\approx1.0370$, well below the optimal makespan factor of about $1.2071$. General speeds make the problem strictly harder: no deterministic algorithm is better than $1.2669$-robust, already for infinitesimally small jobs. We give a $25/16$-robust algorithm for arbitrary processing times and improve the guarantee to $1681/1152\approx1.4592$ for infinitesimally small jobs. Our main tools are a layer decomposition that extends guarantees from unit-size jobs to arbitrary processing times when one assignment satisfies them for every prefix in non-increasing processing-time order, and a threshold analysis of the bag counts produced by greedy assignment rules.

0.32

Minimizing the Makespan Approximately on Two Identical Parallel Machines with a Loading--Unloading Server

cs.DS math.OC ·2026-08-19 ·Keramat Hasani, Frank Werner
theory similarity 0.60
Abstract · 29 pages, 1 appendix

We study makespan minimisation on two identical parallel machines that share a single server for both loading and unloading. Each job must be loaded, processed without interruption on its assigned machine, and unloaded immediately after processing, with a common positive integer duration for all loading and unloading operations. We prove that the decision problem is NP-complete for every fixed server-operation duration and strongly NP-complete when this duration is part of the input. We then analyse ordinary list scheduling and the longest-processing-time rule in the non-unit setting. List scheduling has a tight supremum ratio of two. For the longest-processing-time rule, we obtain the exact worst-case ratio when all processing times are at least the server-operation duration, and derive new parameter-dependent lower and upper bounds for unrestricted instances. The results show that both processing-time granularity and blocking generated by short jobs shape the approximation behaviour of the common-server problem.

0.08