CS Paper Radar

Using Zone-Disjoint Multi-Path Routing Algorithm for Video Transmission over Ah-Hoc Networks

Ali Asghar Khavasi, Nastooh Taheri Javan

cs.NI ·submitted 2026-08-20 15:08 UTC · v1
published

Abstract

Finding multi-path routes in ad hoc networks due to their grid topology seems to be a trivial task, but because of CSMA/CA effects in these networks found paths are not completely disjoint unless an appropriate algorithm have taken into account. If such an algorithm provided and designed carefully it could improve multi-path video transmission over these kinds of networks. By using node-disjoint paths, it is expected that the end-to-end delay and BER in each case should be independent of each other. However, because of natural properties and medium access mechanisms in ad hoc networks the end-to-end delay and also BER between any source and destination depends on the pattern of communication in the neighborhood region. In this case some of the intermediate nodes should be silent to reverence their neighbors and this matter increases the end-to-end delay. To avoid this problem, multi-path routing algorithms can use zone-disjoint paths instead of node-disjoint paths. In this paper we demonstrated a new multi-path routing algorithm that selects zone-disjoint paths that in addition used for video multi-path transmission over ad hoc networks. It is shown that by using this new algorithm along with choosing an appropriate scheme for video transmission over discovered paths, our approach receives enhanced results comparing previously used algorithms.

Closest papers

Nearest neighbours by meaning across the whole index.

IZM-DSR: A New Zone-Disjoint Multi-path Routing Algorithm for Mobile Ad-Hoc Network

cs.NI ·2026-11-15 ·Nastooh Taheri Javan
publishedhighly cited similarity 0.71
Abstract

Some of multi-path routing algorithms in MANETs use multiple paths simultaneously. These algorithms can attempt to find node-disjoint to achieve higher fault tolerance. By using node-disjoint paths, it is expected that the end-to-end delay in each case should be independent of each other. However, because of natural properties and medium access mechanisms in ad hoc networks, such as CSMA/CA, the endto-end delay between any source and destination depends on the pattern of communication in the neighborhood region. In this case some of the intermediate nodes should be silent to reverence their neighbors and this matter increases the end-toend delay. To avoid this problem, multi-path routing algorithms can use zone-disjoint paths instead of node-disjoint paths. In this paper we propose a new multi-path routing algorithm that selects zone-disjoint paths, using omnidirectional antenna. We evaluate our algorithm in several different scenarios. The simulation results show that our approach is very effective in decreasing routing overhead and end-to-end delay.

0.46

ZD-AOMDV: A New Routing Algorithm for Mobile Ad-Hoc Networks

cs.NI ·2026-08-21 ·Nastooh Taheri Javan, Reza Kiaeifar, Bahram Hakhamaneshi, Mehdi Dehghan
publishedhighly cited similarity 0.68
Abstract

A common characteristic of all popular multi-path routing algorithms in mobile ad-hoc networks, such as AOMDV, is that the end to end delay is reduced by utilization of parallel paths. The competition between the neighboring nodes for obtaining a common channel in those parallel paths is the reason for end to end delay increment. In fact, due to medium access mechanism in wireless networks, such as CSMA/CA, data transmissions even through two node-disjoint paths are not completely independent and each path will affect the other one. In this paper we have modified the AODV protocol which results in selection of zone-disjoint paths, to the extent feasible, and as a result we achieve less end to end delay. The efficiency of the proposed protocol has been evaluated on different scenarios and there has been a noticeable improvement in the packet delivery ratio and also in the reduction of end-to-end delay comparing to AOMDV.

0.52

Media-over-Multipath-QUIC for Realtime Video Applications

cs.NI cs.ETcs.MMeess.IV ·2026-08-11 ·Tanya Shreedhar, Zuji Zhou, Nitinder Mohan, Fernando Kuipers
similarity 0.60
Abstract · In review

Multipath transports place a client's WiFi, cellular, and satellite networks under one connection, yet real-time video gains little from them. The scheduler that assigns packets to paths sees only bytes, so it cannot tell a keyframe that anchors a second of video from an enhancement frame whose loss costs one image. We show that the limiting factor is not a shortage of path diversity but the absence of a channel through which the application can name what the transport cannot see. Media over QUIC Transport (MoQT), already deployed on production CDNs, carries media as named Objects, and relays forward each Object's metadata without interpreting it. The knowledge the scheduler lacks therefore already flows through the subscriber's relay. We present MoMQ, a MoQT extension that turns this metadata into path decisions. Applications and relay operators install declarative rules at the edge relay that match Object metadata and express delivery preferences against labeled paths. The relay evaluates the rules mechanically, so it acts on video semantics while containing no video logic. On a live testbed spanning Starlink and WiFi, four rules cut P99.9 frame completion time from 384.7 ms under the best transport-only scheduler to 114.1 ms and reduce the required playback buffer by 61.5%. MoMQ is the only configuration that meets the 150 ms interactive latency target. Across relays in two countries and subscribers on two continents, the same rules apply unchanged and retain their advantage wherever the paths remain disjoint.

0.04

EDAP: An Efficient Data-Gathering Protocol for Wireless Sensor Networks

cs.NI ·2026-10-02 ·Arash Nasiri Eghbali, Nastooh Taheri Javan, Mehdi Dehghan
publishedhighly cited similarity 0.51
Abstract

Directed Diffusion (DD), uses mechanisms such as data aggregation and in-network processing to suppress the additional data overhead however there is no guarantee that paths from nearby sources join after a few hops. Also for path construction, each source floods a distinct exploratory data (ED) packet through the network which is not necessary for nearby sources. In this paper an efficient data-gathering protocol (EDAP) is proposed to address the problems of late-aggregation and distinct ED-flooding through using a virtual sink (VS) node nearby the sources which plays the role of sink node and broadcasts local interest messages and routed gathered data toward destination. Also in this protocol, multiple paths are constructed between virtual sink and the sink node which leads to load-balancing and increase in the life-time of the network nodes. Our routing protocol can produce more than one disjoint or braided path and spread the gathered data properly between constructed paths according to their length and remaining energy. Simulation results shows that in this way a significant amount of energy can be saved and the network lifetime will be increased considerably (up to 75% better than DD).

0.60

Lightweight Onboard Routing and Topology Co-Construction for Autonomous GNSSs

eess.SY ·2026-09-07 ·Huan Yan, Juan A. Fraire, Rongqin Yang, Wenfeng Li, Kanglian Zhao
similarity 0.48
Abstract · 15 pages, 6 figs

Global navigation satellite systems (GNSSs) can already plan their inter-satellite link (ISL) topology onboard, leaving routing as the last step toward autonomous networking. In GNSS ISLs, each satellite links to at most one peer per time slot. We exploit this structure to replace end-to-end path search with a single backward sweep over the slots. The proposed method, DS-SMFP, propagates earliest-arrival times backward from each destination and outputs a STORE/FORWARD decision for every slot, satellite, and destination, in time linear in the number of slots and with working memory independent of the planning horizon. Because each slot needs only its own topology and the delivery state of the next one, routing can steer link selection while the topology is built. This slotwise dependency enables Master-Oriented Topology--Routing Co-Construction (MTRCC), which favors traffic to and from a master satellite performing onboard orbit determination. In a 24-h, 30-satellite BeiDou scenario, DS-SMFP matches the delays of Contact Graph Routing (CGR) and shortest path tree (SPT) routing while running over 180 times faster and using over 36 times less peak routing working memory. Compared with fair contact plan (FCP) topology, MTRCC reduces mean master-related traffic delays by over 10\%, with an approximately 3\% increase in mean PDOP. This paper provides a methodological foundation for efficient autonomous GNSS networking.

0.27

Decentralized Multi-View, Multi-Zone Tracking for Scalable Camera Networks

cs.CV ·2026-10-20 ·David Voihanski, Mor Sinai, Ben Zion Bobrovsky
similarity 0.48
Abstract

We present a decentralized multi-view tracking system for scalable camera networks. Single-view detections are projected to bird's-eye-view (BEV) coordinates and fused by independent multi-view trackers, each managing a dynamic spatial zone. To support scalability across spatially partitioned camera networks, we introduce a decentralized layer for trajectory unification, utilizing a locking protocol and periodic track-merging operations termed global collate. This process is supported by a delayed-output buffering mechanism that retroactively applies history corrections. The configurable delay window absorbs asynchronous coordination latency and helps stabilize cross-zone identity consistency. We detail the design of dynamic zone polygons, consensus-based coordination, and the validation framework, which together maintain global ID consistency with minimal accuracy loss compared to a single-instance baseline in the evaluated configurations.

0.22

Multipath Adaptive Video Streaming with Multiple Description Neural Video Codec over 5G Networks

cs.NI ·2026-08-24 ·Xinyue Hu, Ziyan Wu, Jiaxiang Tang, Wei Ye, Qixin Zhang +3 more
published similarity 0.46
Abstract · 17 pages, including appendix; 23 figures and 3 tables. Accepted at the 34th IEEE International Conference on Network Protocols (ICNP 2026)

5G networks employ multiple radio channels to meet growing demands for bandwidth and high-resolution video streaming for emerging applications. However, existing multipath video systems are largely designed around monolithic codecs, which require sufficiently complete chunk delivery, or layered codecs, which depend on timely base-layer delivery. Under fast-varying 5G conditions with blockage, handovers, and heterogeneous path capacities, we observe that decoding dependencies in existing codecs make multipath delivery fragile: transient under-delivery of critical video data can directly trigger stalls and degrade QoE. This paper proposes NeuralMDC, a neural multiple-description video codec co-designed with multipath streaming for dynamic 5G networks. NeuralMDC encodes each video chunk into independently decodable and mutually refinable description streams, each spanning the full chunk. This design changes the multipath delivery unit from dependent packets or layers to independent chunk-level streams, so missing streams primarily reduce quality rather than making the chunk undecodable. Built on NeuralMDC, we develop a user-space multipath streaming system that maps description streams to heterogeneous 5G paths with simple yet effective scheduling logic. Across trace-driven emulation and operational 5G experiments, NeuralMDC improves QoE by 26%-44% over existing monolithic, layered, and neural streaming systems, improves video quality by up to 41.8%, and keeps stall ratios below 0.32%.

0.34

Regional Anchor Routing for Multi-Object Motion Transfer

cs.CV ·2026-10-29 ·Yuze Li, Fuchen Long, Xinlong Sun, Cheng Yan, Xinyu Zhang +1 more
code/data similarity 0.46
Abstract · Project Page: https://ethan-li123.github.io/RART_page/

Compositional motion transfer requires a model to extract motions from multiple reference videos, and apply each motion to a user-specified object in one target scene. Existing methods normally struggle to reliably assign different reference motions to the correct target objects, thus a motion intended for one object may affect another. Meanwhile, some motion-specific tuning approaches are still facing another issue: they must run a new optimization whenever the reference video changes, making repeated transfers inefficient. To address these limitations, we propose RART, a framework that unifies object-wise motion extraction, target-region anchoring, and frame-aligned injection into a frozen video Diffusion Transformer for multi-object motion transfer. For each reference motion, RART extracts temporally ordered features from the masked reference video, and then conditions them on the target first-frame mask to form mask-anchored motion tokens. Frame-aligned motion cross-attention allows each generated frame to read only the motion tokens at the corresponding time slots, composing all object motions in one denoising process. During training, a motion-attention routing loss encourages each target region to attend to its corresponding motion tokens and reduces interference between objects. Therefore, RART can handle novel reference-target combinations without per-video optimization. Experiments show that RART achieves accurate motion preservation, efficient inference, and strong compositional generalization.

0.31