CS Paper Radar

GhostTac: Manipulating Tactile Sensors without Physical Contact

Kun Wang, Xuancun Lu, Ruochen Zhou, Kai Wang, Tongjun Ye, Yihao Shao, Chen Yan, Xiaoyu Ji, Wenyuan Xu

cs.CR cs.RO ·submitted 2026-08-21 07:39 UTC · v4
top venueunusual

Abstract

Tactile sensors are integral components of modern robotic systems, enabling robots to perceive and interact with the physical environment through tactile feedback. Despite their importance, the physical-layer security of tactile sensors has received little attention in prior work. In this paper, we present GhostTac, to the best of our knowledge, the first contactless attack that manipulates tactile sensing via electromagnetic interference (EMI). We identify that EMI exploits the nonlinear rectification and limited bandwidth amplification effects, allowing carefully crafted EMI signals to be converted into a persistent DC offset that bypasses on-board filtering and induces stable measurement deviations. Building on this mechanism, GhostTac enables fine-grained and controllable manipulation of sensor outputs by reshaping the spatial distribution and manipulating the magnitude at the targeted location. Such interference can induce unintended and harmful robot behaviors, such as causing a domestic robot to exert excessive force, resulting in physical damage or human injury. We evaluate GhostTac on 10 sensor modules and 2 dexterous hands, covering 15 tactile sensors of different types, and demonstrate consistent attack effectiveness across all tested devices. We further present three case studies on tactile grasping, slip detection, and material classification to illustrate practical impacts in real robotic tasks. We envision that our findings shed light on a new physical attack vector against tactile sensing in robotic systems.

Comment
Accepted at ACM CCS 2026

Closest papers

Nearest neighbours by meaning across the whole index.

PhantomTac: Hijacking Robotic Tactile Systems with Deploy-and-forget Tags

cs.CR cs.RO ·2026-10-19 ·Binbin Zhang, Yifeng Zhang, Xiaomeng Chen, Dongyao Chen
top venuecode/data similarity 0.69
Abstract · Accepted at ACM CCS 2026. Project page: https://phantomtac.org

Tactile perception is crucial for precise robotic manipulation, providing an important foundation for dexterous, closed-loop force control. Among various tactile sensing techniques, magnetic tactile sensors stand out thanks to their fine-grained, three-dimensional force perception capability and strong robustness against visual occlusion. In this study, we discover a physical loophole called PhantomTac in magnetic tactile sensors. The attacker can alter the magnetic field, thus spoofing the force interpreted by magnetic tactile sensors. The attacker can stealthily deploy such an attack by simply attaching a thin (the thickness is around 0.5 mm), battery-free magnetic tag to the surface of an object. Hence, the attack tag can be easily concealed by a barcode sticker. Such an attack scheme is "deploy-and-forget" -- the attacker can deploy the tag and leave. When a robotic hand is picking up an object, it may severely damage the object. Specifically, spoofing the normal force can crush the object, whereas spoofing the shear force can lead to a loose grip, thus dropping the object. Compared with directly sabotaging the robotic hand, PhantomTac is much more concealed as the attacker does not need access to the device. We performed extensive reverse-engineering efforts to characterize the sensing mechanism of commercial-off-the-shelf tactile sensors and proposed a practical tag design. End-to-end evaluations conducted on real robots and robotic arms demonstrate that our attack can bypass existing anti-interference mechanisms and effectively hijack their closed-loop control processes, achieving an attack success rate exceeding 95% when the grasping-position offset is bounded within 8 mm. Finally, based on the limitations of existing anti-magnetic interference mechanisms, we propose a multimodal-consistency defense mechanism to mitigate such physical-layer security threats.

0.49

GIFT: Glove-Inferred Force Transfer: Force-Aware Human-to-Robot Skill Transfer from a Wearable Sensing Glove to a Robot Hand Without Tactile Sensors

cs.RO ·2026-09-12 ·Tzach Sarusi
code/data similarity 0.55
Abstract · 7 pages, 5 figures, 1 table. Project page: https://tzahsarusi.github.io

Human-to-robot skill transfer from sensing gloves has so far relied on shared hardware: the same tactile glove worn by the demonstrator and the robot, or a learned alignment between two tactile sensors. We present GIFT (Glove-Inferred Force Transfer), a pipeline in which the interface between human and robot is a physical unit rather than a shared sensor: fingertip force is measured in newtons on the human side and estimated in newtons on the robot side. A wearable glove records finger flexion, calibrated fingertip force, and wrist orientation, while a head-mounted camera records the demonstration; no robot is present. At deployment, the robot estimates force from actuator-current residuals relative to a free-space baseline, through a calibrated mapping to newtons, so any position-controlled hand that reports motor current can serve as the deployment platform. The policy uses a glove-space state and predicts finger-position targets; the robot enters only through two calibrated adapters, a retargeting decoder and a force estimator. We evaluate GIFT on a cup grasp-and-hold task with two action-chunking policies trained on the same demonstrations, with fingertip-force inputs retained in one and zeroed in the other. In a 50-rollout evaluation with sample size and metrics fixed before scoring, both policies succeeded in all 25 rollouts. The median of the per-rollout hold-phase grip-force estimates was 53% lower with force inputs: 1.20 N versus 2.55 N (one-sided Mann-Whitney U, p<0.0001). In an observation ablation, a vision-only policy achieved 0/15 grasps, policies given hand-command state acquired the grasp, and the force inputs determined how hard the policy held. A force channel measured on the human hand thus transfers to a robot hand with no tactile hardware, through a retargeting map from five glove channels to seven robot actuators, with no sensor shared between the two.

0.32

Factorized Tactile Representation and Control for Sim-to-Real Manipulation

cs.RO ·2026-10-07 ·Siqi Shang, Bianca Aumann, Tye Brady, Joshua Migdal, Taskin Padir
similarity 0.54
Abstract · 8 pages, 7 figures

Tactile sim-to-real learning must bridge simulated contact and device-specific sensor responses while preserving information needed for control. We propose a factorized tactile representation and control framework that maps normal force and contact patch to an effective contact response recoverable from sensor readings. The response is separated into contact geometry, force distribution, and temporal contact change, with representation-specific encoding and randomization. A Tactile Gated Policy preserves these representations separately through control and operates over all mask configurations without retraining. We evaluate the approach through response reconstruction, spatial alignment, force regulation, and contact-rich adversarial peg insertion in simulation and the real world, enabling the utility and transfer reliability of different tactile representations to be assessed independently. The approach achieves <1 mm contact localization, 1.69 N force-tracking error on unseen geometries, and a 35% improvement in real-world adversarial peg insertion over the unfactorized response, with different tactile representations benefiting different interactions.

0.18

SoTa: Soft Tactile Skins for Dexterous Manipulation

cs.RO cs.LG ·2026-10-01 ·Jingyun Yang, Baiyu Shi, Timothy Yu, Haitian Liu, Alberta Longhini +4 more
code/data similarity 0.54
Abstract · The first three authors contributed equally. Project website: https://sota-skin.github.io

A growing body of work suggests that tactile sensing gives robot policies contact information that complements vision in dexterous manipulation. However, visuo-tactile robot data remains scarce: dexterous demonstrations require teleoperating robots, which limits dataset scale. Human demonstrations are far cheaper to collect and offer a path to scale this data, but only if human and robot hands carry tactile sensors with corresponding signals. This requires sensors that conform to different hand geometries, cover the full hand, and share a common layout across embodiments. We present SoTa, a low-cost capacitive tactile skin that provides full-hand coverage on humans and robots while preserving a shared layout of 202 taxels across corresponding finger and palm regions. Our multilayer design with fabric electrodes enables in-house fabrication of thin, soft skins with customizable geometry for under $10 in materials per skin. The sensor retains over 97% of its initial response span after 10,000 loading-unloading cycles with traces retaining continuity through 1,280 tight-fist folding cycles. The shared taxel layout supports human-robot co-training with a common tactile encoder and no learned cross-sensor mapping. Across three contact-rich manipulation tasks, tactile observations improve in-distribution success over vision-only policies. With a fixed robot demonstration budget, adding human demonstrations more than doubles mean success across eight evaluation conditions, from 22.8% to 45.9%, improving success in all five out-of-distribution conditions. We plan to open-source the resources needed to fabricate and operate these skins.

0.20

TaF-Foundation: Wrench-Grounded Cross-Sensor Tactile Representations

cs.RO ·2026-11-16 ·Jiaming Jiang, Yuzhe Huang, Baokun Yang, Hao Liang, Li Gao +6 more
benchmarkcode/data similarity 0.53
Abstract · 17 pages, 6 figures, including supplementary material

Tactile sensing is essential for contact-rich manipulation, yet heterogeneous sensing mechanisms and observation formats hinder cross-hardware transfer. Since physical contact is governed by Newtonian mechanics, we ground tactile representations in six-dimensional wrenches, establishing a common physical reference across sensing mechanisms. Specifically, we pair tactile observations from all sensors with wrench measurements, enabling shared physical supervision without requiring direct tactile-to-tactile pairing between sensors. To support learning at scale, we develop a dedicated acquisition platform and collect over 100 million paired tactile observations and wrench measurements from 24 sensors spanning four families of sensing principles. Building on this dataset, our framework combines sensor-specific input adaptation with a shared tactile encoder. By learning to reconstruct wrenches, the encoder maps observations from different sensors into a shared, continuous feature space grounded in contact physics. To leverage these representations for manipulation, we introduce TaF-Policy, which integrates tactile features with visual observations and robot states to generate action chunks. We evaluate the learned representations through wrench estimation, cross-sensor retrieval, few-shot adaptation to unseen sensors, and robotic manipulation. On the core benchmark, our method reduces single-frame force RMSE by 17.1% and improves cross-sensor retrieval R@1 by 13.11 percentage points over the strongest baseline. In manipulation experiments, TaF-Policy achieves average success rates of 51.33% across three simulated tasks and 46.25% across four real-world tasks, compared with 47.33% and 23.75%, respectively, for the strongest baselines evaluated on the same task sets. Project page: https://mrjiangjm.github.io/TaF-Foundation/.

0.35

ActReal: System-Level Mobile Agents Challenge Mobile Automation Detection

cs.CR ·2026-08-30 ·Mingshuo Wang, Hanqing Guo, Huining Li, Yuliang Fu, Jing Xu +1 more
similarity 0.53
Abstract · 15 pages, 5 figures

System-level mobile agents are evolving from fixed scripts into adaptive systems that continuously observe interfaces, reason, and adjust their actions, allowing automated attacks to navigate dynamic UIs and complete complex tasks. Existing applications detect automation using touch trajectories, action timing, and the physical coupling between touch and inertial measurement unit (IMU) signals. However, a privileged system-level agent executor can control both touchscreen input and application-visible sensor delivery, enabling it to jointly generate time-aligned touch and six-axis IMU signals and evade these defenses. We present ActReal, a physical-action attack framework for system-level mobile agents. ActReal converts semantic agent actions into task-valid touch and IMU events using genuine-trajectory adaptation and physics-guided IMU generation. ActReal achieves a mean event-level attack success rate of 77.5\%; even when detectors jointly observe touch and IMU, its attack success rate remains 71.1\%.

0.21

Robust Readout of Cross-Point Resistive Arrays via Time-Domain Optimization

cs.RO ·2026-11-06 ·Taro Tako, Hiroshi Kaminaga, Taisuke Kobayashi
published similarity 0.53
Abstract · 4 pages, 1 figure, IEEE Sensors 2026 accepted

Cross-point resistive arrays are attractive for high-density tactile sensing because they reduce wiring complexity. However, conventional frequency-based readout methods can become inaccurate in robotic sensing environments, where long interconnects and measurement and environmental noise degrade the observed signals. We propose a time-domain optimization method for robust readout of cross-point resistive arrays. The method determines resistance values by fitting a time-domain observation model to the measured waveform over the interval, rather than relying solely on spectral amplitudes. By exploiting the full waveform, the proposed method improves robustness under noisy observation conditions. In simulations of a 16 x 16 array, the proposed method reduced the mean readout error by 20% compared with the baseline method. Furthermore, validation over 1,000 trials showed that the proposed method achieves more robust estimation than the conventional method, reducing the mean error and standard deviation by 24.6% and 77.6%, respectively. The improvement was also confirmed in cross-point array simulations with resistance distributions emulating tactile sensor responses.

0.39

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

cs.RO cs.AIcs.LG ·2026-11-02 ·Binglin, Wang, Xiaole, Jiang, Zicheng Teng +5 more
code/data similarity 0.53
Abstract · Project page: https://panotac.github.io

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

0.19