CS Paper Radar

PhantomTac: Hijacking Robotic Tactile Systems with Deploy-and-forget Tags

Binbin Zhang, Yifeng Zhang, Xiaomeng Chen, Dongyao Chen

cs.CR cs.RO ·submitted 2026-10-19 11:03 UTC · v1
top venuecode/data

Abstract

Tactile perception is crucial for precise robotic manipulation, providing an important foundation for dexterous, closed-loop force control. Among various tactile sensing techniques, magnetic tactile sensors stand out thanks to their fine-grained, three-dimensional force perception capability and strong robustness against visual occlusion. In this study, we discover a physical loophole called PhantomTac in magnetic tactile sensors. The attacker can alter the magnetic field, thus spoofing the force interpreted by magnetic tactile sensors. The attacker can stealthily deploy such an attack by simply attaching a thin (the thickness is around 0.5 mm), battery-free magnetic tag to the surface of an object. Hence, the attack tag can be easily concealed by a barcode sticker. Such an attack scheme is "deploy-and-forget" -- the attacker can deploy the tag and leave. When a robotic hand is picking up an object, it may severely damage the object. Specifically, spoofing the normal force can crush the object, whereas spoofing the shear force can lead to a loose grip, thus dropping the object. Compared with directly sabotaging the robotic hand, PhantomTac is much more concealed as the attacker does not need access to the device. We performed extensive reverse-engineering efforts to characterize the sensing mechanism of commercial-off-the-shelf tactile sensors and proposed a practical tag design. End-to-end evaluations conducted on real robots and robotic arms demonstrate that our attack can bypass existing anti-interference mechanisms and effectively hijack their closed-loop control processes, achieving an attack success rate exceeding 95% when the grasping-position offset is bounded within 8 mm. Finally, based on the limitations of existing anti-magnetic interference mechanisms, we propose a multimodal-consistency defense mechanism to mitigate such physical-layer security threats.

Comment
Accepted at ACM CCS 2026. Project page: https://phantomtac.org
DOI
10.1145/3830454.3846657

Closest papers

Nearest neighbours by meaning across the whole index.

GhostTac: Manipulating Tactile Sensors without Physical Contact

cs.CR cs.RO ·2026-08-21 ·Kun Wang, Xuancun Lu, Ruochen Zhou, Kai Wang, Tongjun Ye +4 more
top venueunusual similarity 0.69
Abstract · Accepted at ACM CCS 2026

Tactile sensors are integral components of modern robotic systems, enabling robots to perceive and interact with the physical environment through tactile feedback. Despite their importance, the physical-layer security of tactile sensors has received little attention in prior work. In this paper, we present GhostTac, to the best of our knowledge, the first contactless attack that manipulates tactile sensing via electromagnetic interference (EMI). We identify that EMI exploits the nonlinear rectification and limited bandwidth amplification effects, allowing carefully crafted EMI signals to be converted into a persistent DC offset that bypasses on-board filtering and induces stable measurement deviations. Building on this mechanism, GhostTac enables fine-grained and controllable manipulation of sensor outputs by reshaping the spatial distribution and manipulating the magnitude at the targeted location. Such interference can induce unintended and harmful robot behaviors, such as causing a domestic robot to exert excessive force, resulting in physical damage or human injury. We evaluate GhostTac on 10 sensor modules and 2 dexterous hands, covering 15 tactile sensors of different types, and demonstrate consistent attack effectiveness across all tested devices. We further present three case studies on tactile grasping, slip detection, and material classification to illustrate practical impacts in real robotic tasks. We envision that our findings shed light on a new physical attack vector against tactile sensing in robotic systems.

0.64

MagPillar: A Soft Magnetopillar Array Tactile Sensor for Robotic Surface Perception

cs.RO ·2026-11-01 ·Haotian Guo, Yu Feng, Hao Wu, Jiazhi Tang, Ningbin Zhang +1 more
similarity 0.56
Abstract

Robotic surface exploration benefits from tactile interfaces that accommodate contact and capture variations in surface characteristics. Herein, we report MagPillar, a tactile sensor inspired by spider tactile hairs that combines a magnetic pillar array with three-axis Hall sensing. A full-array mechanical and magnetic-field model characterizes how pillar deformation affects the superposed fields measured across the array, providing a physical basis for interpreting its contact responses. The compliant pillar architecture translates contact with surface textures and geometric features into distinct magnetic response patterns. Then, in robotic surface perception experiments, spectral features and logistic regression distinguish six material surfaces with an offline accuracy of 99.34% under within-session temporally blocked cross-validation. Continuous scans over periodic protrusions produce amplitude and peak-spacing variations consistent with changes in surface geometry. These findings connect compliant contact mechanics with distributed magnetic sensing, paving a new path for material recognition and qualitative surface-profile perception.

0.35

A robust single-sensing-element tactile sensor for concurrent pressure and tackiness detection with real-time signal decoupling capability

cs.RO cond-mat.mtrl-sci ·2026-09-29 ·Ying Yang, Mingwei Gu, Jia-Sen Xie, Xingyu Ma, Yan-Na Lu +6 more
similarity 0.55
Abstract

Integrating tackiness sensation into the artificial skin of humanoid robots significantly enhances their cognitive and operational capabilities. However existing tactile sensors face challenges in decoupling of the multimodal signal and stability. Here we present a surface-soft tactile sensor that incorporates a Hall effect sensor and a soft magnetic composite within a robust elastic framework. The sensor surface indents under pressure and bulges prominently when retracted from sticky surfaces dynamically altering the Hall sensor-magnet distance. This generates whole-process-traceable and baseline-separated signals enabling real-time differentiation between pressure and pull-off force. This single-sensing-element design facilitates bimodal sensing at the same contact spot while eliminate stress cross-talk enhancing both accuracy and sensitivity. The fusion of a robust framework and magneto-mechanical sensing mechanism equips the sensor with exceptional reliability and excellent signal baseline stability. This tactile sensor holds substantial potential for advancing robotic capabilities in evaluating adhesive properties monitoring rubber aging precisely handling lightweight objects and cognizing natural objects surface characteristics.

0.20

Sensorless damage-safe grasping

cs.RO ·2026-08-25 ·Yusei Shuto, Danilo Vasconcellos Vargas
theory similarity 0.54
Abstract

Robotic fruit harvesting must hold produce securely without bruising it, yet compression stiffness varies several-fold with ripeness within a single species, so no fixed grip force spans the range. Rather than tune force, we bound deformation: a controller closes the gripper until the object's estimated compression strain reaches a user-specified limit $\varepsilon$, using only the encoder position and motor-effort signal on every servo gripper---no tactile or force-torque sensor. Dividing an effort-based contact force by a lower bound on object stiffness makes the stop provably conservative---true compression stays at or below $\varepsilon$---for any $\varepsilon$ above a contact-detection strain floor we identify and quantify: robust detection itself spends compression, linearly in closing speed, making speed an explicit throughput--gentleness knob. Unlike a hand-tuned force threshold, $\varepsilon$ is a certified, size-scaling, operator-interpretable damage limit, and a ready safe-action parameter for learned grasping policies. In MuJoCo simulation over a realistic fruit-stiffness range, under a sensor-noise model calibrated to the real servo, the controller holds $\ge 98\,\%$ grasp at $0\,\%$ damage across all medium-to-firm stiffnesses for the entire certified $\varepsilon$ range, which neither fixed-force baseline attains; on stiffness-graded 3D-printed TPU cubes it matches baseline grasp success at roughly half the grip force and cuts soft-object damage from $100\,\%$ to $40\,\%$.

0.43

OpenTac: An Open Ecosystem for Customizable, Scalable, and Transferable 3D Tactile Sensing

cs.RO eess.SPeess.SY ·2026-10-22 ·Ariel Slepyan, Geeta Chandra Raju Bethala, Jiafeng Gu, Anagha Rajendra Dangle, Yinzhe Zhou +10 more
code/data similarity 0.54
Abstract · 15 pages, 15 figures. Project website, open-source hardware and software, and demonstration videos: https://opentac.github.io

We present OpenTac, a novel sensor and a full-stack ecosystem for tactile skins that are highly customizable, scalable, and readily deployed in downstream robot control and learning applications. Our core contribution is twofold. First, we develop a scalable resistive tactile skin with a structured deformable overlay that converts tangential loading into spatially varying pressure. Differential responses across neighboring "taxels" support decoding of local shear vectors, and the common-mode response encodes normal force. Second, we provide a highly customizable sensor design tool that is able to automatically generate fabrication files for these tactile skins from 2D outlines and developable 3D surfaces, including from abstract descriptions such as text. We develop an ecosystem around the OpenTac sensor, including the CAD design tool, a sensor simulator, cross-sensor transfer, and fast/adaptive data acquisition. We demonstrate the broad applicability of the OpenTac-CAD sensor design tool by designing and fabricating more than 30 sensors across a variety of robot embodiments. We characterize the three-dimensional tactile fields produced by OpenTac with a commercial, high-precision force/torque sensor. We demonstrate the broad applicability of 3D tactile sensing across contact-rich feedback control and manipulation policy learning on four real-world robot embodiments. Additionally, adaptive acquisition enables kilohertz-rate partial readouts, and our readout circuitry enables high dynamic range (HDR) acquisition, measuring, for example, a 3.7 kg weight stack and a 20 g weight on the same sensor in the same frame. We provide all hardware, software, and result videos at opentac.github.io

0.21

GIFT: Glove-Inferred Force Transfer: Force-Aware Human-to-Robot Skill Transfer from a Wearable Sensing Glove to a Robot Hand Without Tactile Sensors

cs.RO ·2026-09-12 ·Tzach Sarusi
code/data similarity 0.54
Abstract · 7 pages, 5 figures, 1 table. Project page: https://tzahsarusi.github.io

Human-to-robot skill transfer from sensing gloves has so far relied on shared hardware: the same tactile glove worn by the demonstrator and the robot, or a learned alignment between two tactile sensors. We present GIFT (Glove-Inferred Force Transfer), a pipeline in which the interface between human and robot is a physical unit rather than a shared sensor: fingertip force is measured in newtons on the human side and estimated in newtons on the robot side. A wearable glove records finger flexion, calibrated fingertip force, and wrist orientation, while a head-mounted camera records the demonstration; no robot is present. At deployment, the robot estimates force from actuator-current residuals relative to a free-space baseline, through a calibrated mapping to newtons, so any position-controlled hand that reports motor current can serve as the deployment platform. The policy uses a glove-space state and predicts finger-position targets; the robot enters only through two calibrated adapters, a retargeting decoder and a force estimator. We evaluate GIFT on a cup grasp-and-hold task with two action-chunking policies trained on the same demonstrations, with fingertip-force inputs retained in one and zeroed in the other. In a 50-rollout evaluation with sample size and metrics fixed before scoring, both policies succeeded in all 25 rollouts. The median of the per-rollout hold-phase grip-force estimates was 53% lower with force inputs: 1.20 N versus 2.55 N (one-sided Mann-Whitney U, p<0.0001). In an observation ablation, a vision-only policy achieved 0/15 grasps, policies given hand-command state acquired the grasp, and the force inputs determined how hard the policy held. A force channel measured on the human hand thus transfers to a robot hand with no tactile hardware, through a retargeting map from five glove channels to seven robot actuators, with no sensor shared between the two.

0.32

Factorized Tactile Representation and Control for Sim-to-Real Manipulation

cs.RO ·2026-10-07 ·Siqi Shang, Bianca Aumann, Tye Brady, Joshua Migdal, Taskin Padir
similarity 0.53
Abstract · 8 pages, 7 figures

Tactile sim-to-real learning must bridge simulated contact and device-specific sensor responses while preserving information needed for control. We propose a factorized tactile representation and control framework that maps normal force and contact patch to an effective contact response recoverable from sensor readings. The response is separated into contact geometry, force distribution, and temporal contact change, with representation-specific encoding and randomization. A Tactile Gated Policy preserves these representations separately through control and operates over all mask configurations without retraining. We evaluate the approach through response reconstruction, spatial alignment, force regulation, and contact-rich adversarial peg insertion in simulation and the real world, enabling the utility and transfer reliability of different tactile representations to be assessed independently. The approach achieves <1 mm contact localization, 1.69 N force-tracking error on unseen geometries, and a 35% improvement in real-world adversarial peg insertion over the unfactorized response, with different tactile representations benefiting different interactions.

0.18

SpectraTac: A Compact Camera-Free Optical Tactile Sensor with Distributed Color Sensing

cs.RO ·2026-08-31 ·Hao Wu, Haotian Guo, Yu Feng, Yutong Wang, Yanzhe Wang +1 more
similarity 0.52
Abstract

Tactile sensing is essential for physical interaction in robotics and human--machine systems. However, combining rich tactile information with compact hardware, low cost, and low computational overhead remains challenging. This work presents SpectraTac, a compact, camera-free optical tactile sensor that combines active red--green--blue (RGB) illumination with spatially distributed color sensing. Contact deforms a compliant transparent elastomer and modulates its internal light field, producing spatially differentiated changes in color and intensity. Three distributed color sensors capture these responses as low-dimensional spatio-spectral features, avoiding cameras, imaging optics, and high-dimensional image processing. The device measures 19.2 mm in diameter and 4 mm in height, with a material cost below USD~5. A data-driven decoding framework simultaneously estimates three-dimensional (3D) force and the contact region from the optical measurements. For 3D force prediction, the sensor achieved mean absolute errors (MAEs) of 0.161, 0.164, and 0.429 N along the x-, y-, and z-axes, respectively. The nine-region contact-classification accuracy was 99.9%. We further evaluated real-time 3D force tracking and contact-region-based human--machine interaction through an interactive control task. These results indicate that distributed color-resolved optical sensing offers a compact, low-cost alternative to camera-based tactile sensing for robotics, wearable sensing, and interactive systems.

0.35