CS Paper Radar

Robust Readout of Cross-Point Resistive Arrays via Time-Domain Optimization

Taro Tako, Hiroshi Kaminaga, Taisuke Kobayashi

cs.RO ·submitted 2026-11-06 06:35 UTC · v1
published

Abstract

Cross-point resistive arrays are attractive for high-density tactile sensing because they reduce wiring complexity. However, conventional frequency-based readout methods can become inaccurate in robotic sensing environments, where long interconnects and measurement and environmental noise degrade the observed signals. We propose a time-domain optimization method for robust readout of cross-point resistive arrays. The method determines resistance values by fitting a time-domain observation model to the measured waveform over the interval, rather than relying solely on spectral amplitudes. By exploiting the full waveform, the proposed method improves robustness under noisy observation conditions. In simulations of a 16 x 16 array, the proposed method reduced the mean readout error by 20% compared with the baseline method. Furthermore, validation over 1,000 trials showed that the proposed method achieves more robust estimation than the conventional method, reducing the mean error and standard deviation by 24.6% and 77.6%, respectively. The improvement was also confirmed in cross-point array simulations with resistance distributions emulating tactile sensor responses.

Comment
4 pages, 1 figure, IEEE Sensors 2026 accepted

Closest papers

Nearest neighbours by meaning across the whole index.

Non-Imaging Optical Tactile Sensors for Robotics: Transduction Principles, System Integration, and Robotic Applications

cs.RO ·2026-11-16 ·Hao Wu, Yu Feng, Haotian Guo, Huichan Zhao, Changsheng Wu +1 more
similarity 0.56
Abstract · 35 pages, 9 figures

Non-imaging optical tactile sensors encode contact through changes in optical intensity, wavelength, spectra, or photon counts, offering diverse architectures for robotic touch. Their usefulness depends on whether contact variables can be reliably distinguished from coupled mechanical and environmental effects, and whether the resulting information can be delivered in time to guide action. This review develops a unified framework linking mechanical load transmission, optical encoding, readout, and tactile inference to robotic task requirements. It examines reflective and waveguide-based devices, micro/nanofibers, fiber gratings, interferometric and resonant structures, and mechanoluminescent composites. Three considerations emerge across these approaches. First, high optical sensitivity supports accurate tactile estimation only when target variables remain identifiable under the relevant contact and calibration conditions. Second, spatial coverage and feedback timing must be assessed at the system level, accounting for multiplexing, acquisition, demodulation, and inference. Third, device characterization, offline recognition, and closed-loop robotic performance provide distinct levels of evidence and require different evaluation criteria. Representative studies illustrate how these considerations shape force estimation, contact localization, slip correction and distributed interaction. This review concludes with priorities for calibration transfer, reliable interfaces, scalable readout, and task-based validation, providing a basis for selecting and developing non-imaging optical tactile architectures for robotics.

0.16

VecTile: A Low-Cost Flexible Tactile Array for 3-DoF Force Sensing

cs.RO ·2026-10-22 ·Jian Hou, Xin Zhou, Adam J. Spiers
similarity 0.54
Abstract · 8 pages, 8 figures. Submitted to IEEE International Conference on Robotics and Automation (ICRA) 2027

Tactile sensing provides robots with contact information difficult to obtain from vision alone. Shear force is particularly important for understanding tangential contact, guiding corrective motions, and maintaining grasp stability, yet flexible and low-cost tactile arrays often measure only normal force. We introduce VecTile, a low-cost, 6 mm thin, flexible tactile array capable of three-axis force sensing. VecTile combines a piezoresistive layer with passive silicone nubs that convert normal and shear forces into distinguishable pressure patterns. The sensor can be fabricated in-house without specialized equipment. The complete system costs less than 35 USD for a 4x4 array. We validate the sensing mechanism through finite element analysis and hardware experiments. In controlled single-taxel tests over 1-5 N normal force and up to 1.5 N shear force, VecTile achieves root-mean-square errors of 0.39 N and 0.16 N for normal and shear forces. A VecTile calibrated while flat retains accuracy when curved, while a five-minute manual calibration is sufficient for practical use. Two applications demonstrate its utility. First, shear readings are sensitive enough to stop a sharp scalpel from puncturing a balloon after contact. Second, the sensor substantially improves Diffusion Policy-guided power-plug insertion. All designs and code will be released upon paper acceptance. Project website: https://jiannnh.github.io/VecTile/.

0.20

GhostTac: Manipulating Tactile Sensors without Physical Contact

cs.CR cs.RO ·2026-08-21 ·Kun Wang, Xuancun Lu, Ruochen Zhou, Kai Wang, Tongjun Ye +4 more
top venueunusual similarity 0.53
Abstract · Accepted at ACM CCS 2026

Tactile sensors are integral components of modern robotic systems, enabling robots to perceive and interact with the physical environment through tactile feedback. Despite their importance, the physical-layer security of tactile sensors has received little attention in prior work. In this paper, we present GhostTac, to the best of our knowledge, the first contactless attack that manipulates tactile sensing via electromagnetic interference (EMI). We identify that EMI exploits the nonlinear rectification and limited bandwidth amplification effects, allowing carefully crafted EMI signals to be converted into a persistent DC offset that bypasses on-board filtering and induces stable measurement deviations. Building on this mechanism, GhostTac enables fine-grained and controllable manipulation of sensor outputs by reshaping the spatial distribution and manipulating the magnitude at the targeted location. Such interference can induce unintended and harmful robot behaviors, such as causing a domestic robot to exert excessive force, resulting in physical damage or human injury. We evaluate GhostTac on 10 sensor modules and 2 dexterous hands, covering 15 tactile sensors of different types, and demonstrate consistent attack effectiveness across all tested devices. We further present three case studies on tactile grasping, slip detection, and material classification to illustrate practical impacts in real robotic tasks. We envision that our findings shed light on a new physical attack vector against tactile sensing in robotic systems.

0.63

An Evidence-Guided Framework for Tissue-Barrier Impedance Review: Deletion and Resistance Sensitivity

eess.SP ·2026-10-23 ·Leo Yang, Yingtong Zhou
similarity 0.50
Abstract · 5 pages, 3 figures, 3 tables

Reviewing tissue-barrier impedance requires connecting spectral anomalies with resistance estimates and experimental context. We present an evidence-guided framework that coordinates numerical checks and traceable actions for human review. In-house simulations assess the effect of removing flagged frequencies, public datasets test model adaptation, and local measurements demonstrate the review workflow. Removing flagged frequencies reduced resistance error under quadratic objectives, whereas robust fitting showed little average benefit from deletion and a mean error increase for endpoint-pair perturbations. High errors clustered around a few fitted circuit parameter sets, highlighting the value of examining parameter identifiability. Under the tested noise and perturbation conditions, these findings support robust full-spectrum estimation, flag-guided inspection, and matched sensitivity checks.

0.26

Learning tactile perception from high-bandwidth single-point sensing

cs.RO cs.LG ·2026-09-21 ·Joseph Rigal, Emmanuel Virot, Caroline Pascal
code/data similarity 0.50
Abstract · Our project page with videos is at \url{https://spectrobot-project.github.io/}

Tactile sensing is increasingly being incorporated into learning-based robotic manipulation, yet many existing approaches rely on spatially distributed sensors. Here we introduce {SpectRobot}, a framework that transforms single-point tactile signals into compact time-frequency spectrograms. These spectrograms encode high-bandwidth tactile histories as fixed-size image-like representations. They can be processed by standard vision encoders and integrated into learning pipelines originally developed for vision, while preserving temporal and frequency information unavailable to conventional cameras. Rather than increasing spatial density through arrays of tactile elements, SpectRobot exploits the rich dynamics contained in sparse, high-bandwidth single-point measurements. In our implementation, the sensors are mounted away from the contact surface while remaining mechanically coupled to it, reducing direct exposure to wear and potentially improving robustness in harsh environments and for long-term deployment on dexterous robots. Our experiments demonstrate that: (1) a robot can exploit single-point vibration signals to solve a visually occluded manipulation task; (2) temporal history strongly influences policy performance, while sensing bandwidth controls the spectral information available, with measurements extending to 100~kHz; and (3) the same representation can be used across different tactile sensing technologies mediated by acceleration, force, or strain. We further show that capabilities previously associated with research-grade instrumentation can be accessed using readily available, off-the-shelf hardware. We believe that broader access to high-bandwidth tactile sensing could facilitate the integration of contact dynamics into embodied learning systems and, for some tasks, offer an alternative or complement to increasing the spatial density of tactile sensing.

0.30

OpenTac: An Open Ecosystem for Customizable, Scalable, and Transferable 3D Tactile Sensing

cs.RO eess.SPeess.SY ·2026-10-22 ·Ariel Slepyan, Geeta Chandra Raju Bethala, Jiafeng Gu, Anagha Rajendra Dangle, Yinzhe Zhou +10 more
code/data similarity 0.49
Abstract · 15 pages, 15 figures. Project website, open-source hardware and software, and demonstration videos: https://opentac.github.io

We present OpenTac, a novel sensor and a full-stack ecosystem for tactile skins that are highly customizable, scalable, and readily deployed in downstream robot control and learning applications. Our core contribution is twofold. First, we develop a scalable resistive tactile skin with a structured deformable overlay that converts tangential loading into spatially varying pressure. Differential responses across neighboring "taxels" support decoding of local shear vectors, and the common-mode response encodes normal force. Second, we provide a highly customizable sensor design tool that is able to automatically generate fabrication files for these tactile skins from 2D outlines and developable 3D surfaces, including from abstract descriptions such as text. We develop an ecosystem around the OpenTac sensor, including the CAD design tool, a sensor simulator, cross-sensor transfer, and fast/adaptive data acquisition. We demonstrate the broad applicability of the OpenTac-CAD sensor design tool by designing and fabricating more than 30 sensors across a variety of robot embodiments. We characterize the three-dimensional tactile fields produced by OpenTac with a commercial, high-precision force/torque sensor. We demonstrate the broad applicability of 3D tactile sensing across contact-rich feedback control and manipulation policy learning on four real-world robot embodiments. Additionally, adaptive acquisition enables kilohertz-rate partial readouts, and our readout circuitry enables high dynamic range (HDR) acquisition, measuring, for example, a 3.7 kg weight stack and a 20 g weight on the same sensor in the same frame. We provide all hardware, software, and result videos at opentac.github.io

0.21

Topology optimisation and simulated state reconstruction for self-sensing piezoresistive grippers

cs.CE ·2026-09-13 ·Connor N Mallon, Zachary J Wegert, Anthony P Roberts, Joshua Pinskier, Harry Bowman +1 more
similarity 0.48
Abstract

We consider the computational design of a self-sensing robotic gripper that has the potential to reduce reliance on traditional external sensors. We computationally investigate the potential of a novel sensing method that exploits the coupled electromechanical properties of piezoresistive materials to enable mechanical perception using sparse electrical measurements. In this theoretical proof-of-concept, we show that under the idealised assumptions of linear constitutive relationships and quasi-static gripper operation, it is possible to reconstruct simple contact shapes and gripper displacement fields using a small number of simulated electrical measurements, suggesting the potential of the proposed sensing technique. We use topology optimisation to promote the quality of displacement state recovery by adding an electrical performance objective to the mechanical compliance requirement of the gripper. Using the proposed reconstruction technique, we showcase the improved reconstruction ability of an electrically optimised gripper design through an increased robustness to noisy synthetic measurements compared to a gripper designed with only a mechanical objective in the topology optimisation problem. In the future, detailed inclusion of non-linear effects and experimental realisation of this theoretical proof-of-concept may help remove the constraints of traditional sensors for robotic handling, potentially facilitating sensing in settings where current sensing systems are impractical.

0.29

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

cs.RO cs.AIcs.LG ·2026-11-02 ·Binglin, Wang, Xiaole, Jiang, Zicheng Teng +5 more
code/data similarity 0.48
Abstract · Project page: https://panotac.github.io

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

0.19