CS Paper Radar

Topology optimisation and simulated state reconstruction for self-sensing piezoresistive grippers

Connor N Mallon, Zachary J Wegert, Anthony P Roberts, Joshua Pinskier, Harry Bowman, Vivien J Challis

cs.CE ·submitted 2026-09-13 01:44 UTC · v1

Abstract

We consider the computational design of a self-sensing robotic gripper that has the potential to reduce reliance on traditional external sensors. We computationally investigate the potential of a novel sensing method that exploits the coupled electromechanical properties of piezoresistive materials to enable mechanical perception using sparse electrical measurements. In this theoretical proof-of-concept, we show that under the idealised assumptions of linear constitutive relationships and quasi-static gripper operation, it is possible to reconstruct simple contact shapes and gripper displacement fields using a small number of simulated electrical measurements, suggesting the potential of the proposed sensing technique. We use topology optimisation to promote the quality of displacement state recovery by adding an electrical performance objective to the mechanical compliance requirement of the gripper. Using the proposed reconstruction technique, we showcase the improved reconstruction ability of an electrically optimised gripper design through an increased robustness to noisy synthetic measurements compared to a gripper designed with only a mechanical objective in the topology optimisation problem. In the future, detailed inclusion of non-linear effects and experimental realisation of this theoretical proof-of-concept may help remove the constraints of traditional sensors for robotic handling, potentially facilitating sensing in settings where current sensing systems are impractical.

Closest papers

Nearest neighbours by meaning across the whole index.

Reliable Piezoresistive Strain Sensing Through Physical Limits and Uncertainty Monitoring

cs.RO ·2026-08-16 ·Carmen Ballester, Víctor Muñoz, Dorin Copaci, Dolores Blanco
similarity 0.58
Abstract

Soft piezoresistive strain sensors are one of the most common sensing solutions for wearable and soft robotic applications due to their flexibility and compliance. However, their resistance response is nonlinear and hysteretic, and a sensor can be pushed past its calibrated workspace or misbehave inside it, carrying that error into a decision or control loop. Probabilistic regressors track confidence but ignore those limits. A predictive mean can look unremarkable even when the reading comes from a sensor outside its admissible range or already failing internally, so a confident-looking estimate is not the same as a trustworthy one. This paper proposes a reliability framework pairing a physics-informed probabilistic inverse model, built on physics-guided input features, with a risk factor fusing uncertainty with strain and strain-rate limits into a three-state monitor. Tests on a Nitinol wire and a silver-coated polyamide thread with a Gaussian Process raised fit scores to 0.90-0.95 (RMSE 0.26%-0.15%) and a 96% empirical coverage against the 95% target. The monitor caught 95% of out-of-range and 100% of abnormal conditions while staying reliable under nominal operation. A sensor that reports confidence alongside its estimate lets a system withhold action instead, since it needs no labeled failure examples, which are hard to collect for soft materials.

0.04

X-Hinges: 3D Printing Self-Sensing Compliant Mechanisms for Continuous and Multi-DOF Motion Sensing

cs.HC ·2026-09-10 ·Xiang Chang, Haiyang Yan, Stefanie Mueller, Jiaji Li
top venue similarity 0.57
Abstract · Accepted at ACM UIST 2026. 15 pages, 24 figures. Author's accepted manuscript

We present X-Hinges, a design and fabrication method for self-sensing compliant mechanisms based on multi-material FDM 3D printing. By co-printing two conductive filaments of different conductivities within a compliant body, we embed resistive sensing elements directly during fabrication without post-assembly, enabling continuous motion sensing across multiple degrees of freedom in a single print. The structure supports three degrees of freedom, each equipped with a dedicated sensing element configuration for multi-DOF motion estimation. We develop a precision data acquisition system and data-driven regression models that enable continuous, real-time motion sensing. We also introduce an interactive design tool for customizing the geometry, mechanical properties, degrees of freedom, and sensing configurations of X-Hinges. The tool also supports augmenting existing 3D models with self-sensing structures, endowing ordinary objects with continuous multi-DOF sensing capabilities. Finally, we present a set of application examples demonstrating the capability of X-Hinges for fabricating personalized interactive interfaces.

0.47

Physics-Informed Tactile-based Shape Estimation of Deformable Linear Objects

cs.RO ·2026-11-17 ·Rotem Atari, Stav Ashur, Avishai Sintov
similarity 0.57
Abstract

Accurate shape estimation of Deformable Linear Objects (DLOs) is a fundamental challenge in robotic manipulation, often hindered by visual occlusions and the high-dimensional configuration space of flexible materials. While Force/Torque (F/T) and vision-centric methods have been proposed, they frequently struggle with grasp-site ambiguities and environmental interference. In this letter, we investigate the hypothesis that global shape estimation can be achieved through tactile sensing and proprioception, without any visual perception. We contend that dense, high-resolution tactile imprints capture critical boundary conditions and contact gradients that are sufficient to resolve the high-dimensional configuration of the DLO. To prove this, we introduce a Physics-Informed Vision Transformer (ViT) framework that maps tactile images to a 3D vertex chain. By leveraging self-attention mechanisms and a physics-weighted loss function, our model enforces structural priors to ensure that the predicted geometry adheres to the object's physical manifold. Experimental results demonstrate that our tactile-based approach achieves superior reconstruction accuracy across Euclidean and Chamfer metrics. Furthermore, we demonstrate the efficiency of this modality, achieving model transfer to novel DLO materials and geometries. Our findings suggest that tactile feedback provides a robust and computationally efficient alternative for DLO state estimation in visually degraded or occluded environments.

0.25

Tactile Reconstruction of Contact Task Frames and Forces for Hybrid Force/Motion Control

cs.RO ·2026-10-07 ·Antonio Rapuano, Simone Orelli, Barbara Bazzana, Antonio Franchi, Alessandro De Luca
similarity 0.57
Abstract · 14 pages, 9 figures, 7 tables. Video: https://youtube.com/playlist?list=PLejKMZmW8AvI. Dataset: https://doi.org/10.5281/zenodo.23209032

Hybrid force/motion control requires knowledge of the interaction force and of a task frame defining the force- and motion-controlled directions. These quantities are usually obtained from force/torque sensing or model-based residuals, often assuming also a nominal environment model. This work addresses the online estimation of the contact force and a possibly time-varying task frame using only soft optical tactile sensing, under the assumption of locally planar contact with a negligible contact moment. The proposed method maps a single image of the deformed elastomer of a soft optical tactile sensor to observable contact variables: indentation depth, two surface-to-sensor tilt angles, and 3D contact force, each with a per-sample uncertainty estimate. The mapping is learned through a self-labeling acquisition procedure, in which a manipulator imposes controlled contacts while an auxiliary Force/Torque sensor is used offline to provide ground-truth labels. The tactile measurement is then fused with robot proprioceptive data in an Extended Kalman Filter, producing a continuously updated estimate of the contact task frame and of the interaction force. Control experiments with a DigiTac sensor mounted on a UR10 manipulator demonstrate closed-loop contact force regulation against a flat rigid board in linear and angular motion by a human operator, with touch as the only exteroceptive feedback.

0.23

GlowTact: Simple and Compact Vision-Based Tactile Sensing with High Sensitivity and Spatial Resolution

cs.RO ·2026-09-26 ·Yuxiang Ma, Megha Tippur, Pengfei Ye, Sandra Q. Liu, Haonan Chen +2 more
similarity 0.57
Abstract · Project webiste: https://glowtact.github.io/

Vision-based tactile sensors (VBTS) provide rich contact information for robotic manipulation, but existing designs can be hard to simplify and adapt to the size and constraints of humanoid fingertips. We introduce \textbf{GlowTact}, a pressure-responsive vision-based tactile sensing mechanism that directly visualizes contact pressure. \textbf{GlowTact} requires only single-color, non-directional illumination, and the raw tactile image directly represents the pressure distribution without explicit geometry reconstruction. This simple sensing principle enables compact, customizable tactile sensors while preserving high sensitivity and rich spatial detail. We demonstrate gram-scale contact detection, accurate normal-force estimation, and reconstruction of fine contact geometry, including M1 screw threads. These results establish \textbf{GlowTact} as a practical new sensing technology for compact humanoid fingertips, combining a durable nitrile membrane and simple optical design with sensitive and information-rich tactile perception.

0.29

VecTile: A Low-Cost Flexible Tactile Array for 3-DoF Force Sensing

cs.RO ·2026-10-22 ·Jian Hou, Xin Zhou, Adam J. Spiers
similarity 0.56
Abstract · 8 pages, 8 figures. Submitted to IEEE International Conference on Robotics and Automation (ICRA) 2027

Tactile sensing provides robots with contact information difficult to obtain from vision alone. Shear force is particularly important for understanding tangential contact, guiding corrective motions, and maintaining grasp stability, yet flexible and low-cost tactile arrays often measure only normal force. We introduce VecTile, a low-cost, 6 mm thin, flexible tactile array capable of three-axis force sensing. VecTile combines a piezoresistive layer with passive silicone nubs that convert normal and shear forces into distinguishable pressure patterns. The sensor can be fabricated in-house without specialized equipment. The complete system costs less than 35 USD for a 4x4 array. We validate the sensing mechanism through finite element analysis and hardware experiments. In controlled single-taxel tests over 1-5 N normal force and up to 1.5 N shear force, VecTile achieves root-mean-square errors of 0.39 N and 0.16 N for normal and shear forces. A VecTile calibrated while flat retains accuracy when curved, while a five-minute manual calibration is sufficient for practical use. Two applications demonstrate its utility. First, shear readings are sensitive enough to stop a sharp scalpel from puncturing a balloon after contact. Second, the sensor substantially improves Diffusion Policy-guided power-plug insertion. All designs and code will be released upon paper acceptance. Project website: https://jiannnh.github.io/VecTile/.

0.20

Relaxation-Aware Multimodal Sensing of Soft Gripper Driven by Structure-Perception-Learning

cs.RO ·2026-08-27 ·Yanzhe Wang, Hao Wu, Ziyi Zheng, Huixu Dong
published similarity 0.56
Abstract · 11 pages, 9 figures. Published in Robotics: Science and Systems (RSS 2026)

Achieving stable, sustained grasping with soft robotic hands remains a fundamental challenge. Compliance enables safe and adaptive contact, yet the intrinsic viscoelasticity of soft polymers leads to stress relaxation and a continuous decay of grasping force during holding. Inspired by human grasping, which combines phase-dependent stiffness regulation with continuous sensing and feedback, this paper presents an integrated structure--perception--learning framework. We develop a variable-stiffness soft gripper that uses onboard vision and infrared thermography to track deformation and the temperature field in real time, preserving continuous tracking of the interaction state. To mitigate relaxation-induced force decay, we propose a temperature-coupled viscoelastic force representation, together with a physics-informed learning model, to reconstruct the force trend and provide explicit compensation during holding. Experiments show that, in a 280s force-controlled grasp-and-hold task, the proposed method maintains the desired force with a mean absolute error of 0.066N, outperforming fixed-aperture and instantaneous-only baselines by 80% and 95%, respectively. Overall, the results support a mechanism--AI co-design view: mechanisms shape feasible interactions, while learning compensates remaining uncertainty in viscoelastic dynamics, together enabling stable, sustained grasping.

0.57

Tactile Sensing Array for Multi-Phalanx Sensing in Humanoid Hands

cs.RO cs.ET ·2026-09-24 ·Neel Adwani, Muhaiminul Islam Akash, Rituja Bhattacharya, Cong Wang
publishedhot direction similarity 0.56
Abstract · Accepted to be presented at IROS Workshop Touch2Action

Humanoid hands require tactile feedback across the whole finger, not just the fingertip, to grasp and manipulate objects properly. Vision and proprioception alone cannot reliably provide this information, particularly when the hand's own fingers occlude the camera's view of the grasp. We present a low-cost tactile array for a humanoid finger, made from Velostat and conductive tape. The fingertip carries seven contact points including a 2x3 matrix wrapped across its front, left, and right faces, and a separate contact point at the tip. The proximal and middle phalanges each carry a single front-facing contact line. We measure the sensor's hysteresis and recovery time after release, through repeated loading and press-release tests. We also test a compliant, 3D-printed contact structure with a gap and a bump, inspired by similar designs in prior work, and show it cuts recovery time by 74% compared to a flush-contact baseline. We then show the sensor can produce distinct activation patterns for different contact geometries (flat, edge, corner) at the fingertip, and that it registers contact across all three phalanges during a grip. Finally, we discuss the limits of our fabrication changes and point to software-based compensation as a promising way to more directly fix the remaining hysteresis in the future.

0.40