CS Paper Radar

Tactile Sensing Array for Multi-Phalanx Sensing in Humanoid Hands

Neel Adwani, Muhaiminul Islam Akash, Rituja Bhattacharya, Cong Wang

cs.RO cs.ET ·submitted 2026-09-24 19:48 UTC · v1
publishedhot direction

Abstract

Humanoid hands require tactile feedback across the whole finger, not just the fingertip, to grasp and manipulate objects properly. Vision and proprioception alone cannot reliably provide this information, particularly when the hand's own fingers occlude the camera's view of the grasp. We present a low-cost tactile array for a humanoid finger, made from Velostat and conductive tape. The fingertip carries seven contact points including a 2x3 matrix wrapped across its front, left, and right faces, and a separate contact point at the tip. The proximal and middle phalanges each carry a single front-facing contact line. We measure the sensor's hysteresis and recovery time after release, through repeated loading and press-release tests. We also test a compliant, 3D-printed contact structure with a gap and a bump, inspired by similar designs in prior work, and show it cuts recovery time by 74% compared to a flush-contact baseline. We then show the sensor can produce distinct activation patterns for different contact geometries (flat, edge, corner) at the fingertip, and that it registers contact across all three phalanges during a grip. Finally, we discuss the limits of our fabrication changes and point to software-based compensation as a promising way to more directly fix the remaining hysteresis in the future.

Comment
Accepted to be presented at IROS Workshop Touch2Action

Closest papers

Nearest neighbours by meaning across the whole index.

GlowTact: Simple and Compact Vision-Based Tactile Sensing with High Sensitivity and Spatial Resolution

cs.RO ·2026-09-26 ·Yuxiang Ma, Megha Tippur, Pengfei Ye, Sandra Q. Liu, Haonan Chen +2 more
similarity 0.72
Abstract · Project webiste: https://glowtact.github.io/

Vision-based tactile sensors (VBTS) provide rich contact information for robotic manipulation, but existing designs can be hard to simplify and adapt to the size and constraints of humanoid fingertips. We introduce \textbf{GlowTact}, a pressure-responsive vision-based tactile sensing mechanism that directly visualizes contact pressure. \textbf{GlowTact} requires only single-color, non-directional illumination, and the raw tactile image directly represents the pressure distribution without explicit geometry reconstruction. This simple sensing principle enables compact, customizable tactile sensors while preserving high sensitivity and rich spatial detail. We demonstrate gram-scale contact detection, accurate normal-force estimation, and reconstruction of fine contact geometry, including M1 screw threads. These results establish \textbf{GlowTact} as a practical new sensing technology for compact humanoid fingertips, combining a durable nitrile membrane and simple optical design with sensitive and information-rich tactile perception.

0.29

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

cs.RO cs.AIcs.LG ·2026-11-02 ·Binglin, Wang, Xiaole, Jiang, Zicheng Teng +5 more
code/data similarity 0.70
Abstract · Project page: https://panotac.github.io

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

0.19

Tactus: Tactile & Pose Sensing Glove for Natural Dexterity Data Collection

cs.RO cs.AIcs.ARcs.LG ·2026-10-29 ·Li Guan, Rachael Granberry, Sahar Aseeri, Sahar Rostami, Taylor Niehues +99 more
similarity 0.69
Abstract · 9 pages

Collecting naturalistic human manipulation demonstrations with accurate contact force and hand pose is essential for robot dexterous manipulation policy and foundational world model learning - yet no existing wearable platform provides both calibrated fingertip force sensing and occlusion-resilient hand tracking in a form factor that preserves natural manipulation behavior. We present Tactus, a textile-integrated sensing glove that co-optimizes three design pillars: (1) a thin, conformal 3D-knit form factor (1.5 mm fingertip stackup) designed to minimize interference with natural manipulation, (2) strategically placed capacitive tactile sensors at manipulation-relevant regions informed by empirical contact studies, and (3) IMU-fused pose tracking that maintains accuracy through the hand-object occlusions where manipulation data is most valuable. Tactus includes a documented calibration pipeline for cross-glove consistency and per-session calibration for subject-dependent correction. To enable objective comparison, we introduce standardized benchmarking protocols for tactile force regression and hand pose estimation, and apply them to Tactus and two commercially available tactile gloves - to our knowledge the first quantitative cross-platform evaluation of this kind. Tactus resolves a minimum detectable force of 0.59 N at 95% confidence, 1.6 - 2.7x lower than the commercial baselines, and with 0.87 cross-participant consistency, while our pose tracking sustains 11.0 mm fingertip keypoint relative error during manipulation, when occlusion is heaviest. We show that these combined signals support object property estimation, slip detection, and representative recording of hand-object interaction - yielding demonstration data with the fidelity required for contact-aware manipulation policies and world models.

0.21

SoTa: Soft Tactile Skins for Dexterous Manipulation

cs.RO cs.LG ·2026-10-01 ·Jingyun Yang, Baiyu Shi, Timothy Yu, Haitian Liu, Alberta Longhini +4 more
code/data similarity 0.68
Abstract · The first three authors contributed equally. Project website: https://sota-skin.github.io

A growing body of work suggests that tactile sensing gives robot policies contact information that complements vision in dexterous manipulation. However, visuo-tactile robot data remains scarce: dexterous demonstrations require teleoperating robots, which limits dataset scale. Human demonstrations are far cheaper to collect and offer a path to scale this data, but only if human and robot hands carry tactile sensors with corresponding signals. This requires sensors that conform to different hand geometries, cover the full hand, and share a common layout across embodiments. We present SoTa, a low-cost capacitive tactile skin that provides full-hand coverage on humans and robots while preserving a shared layout of 202 taxels across corresponding finger and palm regions. Our multilayer design with fabric electrodes enables in-house fabrication of thin, soft skins with customizable geometry for under $10 in materials per skin. The sensor retains over 97% of its initial response span after 10,000 loading-unloading cycles with traces retaining continuity through 1,280 tight-fist folding cycles. The shared taxel layout supports human-robot co-training with a common tactile encoder and no learned cross-sensor mapping. Across three contact-rich manipulation tasks, tactile observations improve in-distribution success over vision-only policies. With a fixed robot demonstration budget, adding human demonstrations more than doubles mean success across eight evaluation conditions, from 22.8% to 45.9%, improving success in all five out-of-distribution conditions. We plan to open-source the resources needed to fabricate and operate these skins.

0.20

TapTacTouch: Shape Completion from Sparse Tactile Contacts with Geometric Priors

cs.RO ·2026-11-18 ·Yoobin Shin, Jaeyoung Lee, Jieun Kang, Hyun Song, Woojin Kim +1 more
similarity 0.67
Abstract · 8 pages, 5 figures, 4 tables

3D object reconstruction is essential for robotic perception and manipulation, yet conventional approaches predominantly rely on visual observations that can be limited by occlusion or unavailable in visually constrained environments. In this work, we propose a vision-free, training-free, and category-agnostic framework for reconstructing 3D object meshes from sparse tactile contacts without relying on pretrained shape models. A 6-DoF robotic arm equipped with a 20-DoF multi-finger robotic hand collects tactile observations using 3x3 pressure sensor arrays mounted on the finger pads. The acquired tactile measurements are transformed into 3D contact constraints through robot kinematics and integrated into a multi-scale Gaussian Process Implicit Surface (GPIS). To address sparse and incomplete surface observations, the proposed method incorporates contact confidence weighting, weak pseudo-surface constraints, and an observation-driven geometric prior to preserve local surface geometry and provide structural guidance in unobserved regions. Real-world experiments on six objects achieve a Chamfer Distance (CD) of 1.610, an Earth Mover's Distance (EMD) of 7.738, and an F-Score of 95.00, with reconstruction completed in an average of 49.99 s per object. These results demonstrate that sparse tactile sensing can provide sufficient geometric information for continuous 3D object reconstruction without visual or semantic information.

0.16

Which Taxels, Not How Many: Tactile Sensor Placement for Dexterous Policies

cs.RO ·2026-11-07 ·Taeyun Kim, Jinsoo Shin, Taehwa Kim, Taeyoon Kim, Jinyoung Choi
similarity 0.67
Abstract · Accepted at the Workshop on Everything Beneath the Policy, CoRL 2026. 8 pages, 5 figures, 12 tables

Policies for dexterous manipulation depend on design choices made before training: which sensors enter the observation, where they are placed, and how their readings are arranged for the encoder. These choices are rarely examined. For tactile sensing, simulation studies place taxels uniformly over the hand, and this placement has become a default without being tested. We test this default under a single controlled protocol. The protocol holds the teacher, the training procedure, and the candidate taxels fixed and varies only the sensor configuration and the representation. We evaluate it on in-palm rotation and grasping with three robot hands. A small set of taxels selected from contact statistics matches a far larger uniform set. Taxels at rarely contacted sites are equivalent to no tactile input. With all candidate taxels, their layout in the input tensor does not affect performance, even for a convolutional encoder. Uniform placement therefore overestimates the number of taxels a task requires. We distill these results into lessons for designing tactile policies and into a minimal set of design choices that a tactile policy study should report.

0.18

3DTouch: A Tactile-aware VLA Model with 3D Geometric Relations for Dexterous Manipulation

cs.RO ·2026-11-18 ·Xin Zhang, Shiqi Zhang, Siyuan Cao, Juncheng Cai, Yedong Shen +7 more
similarity 0.67
Abstract

In contact-rich dexterous manipulation, occlusion by the fingers and interacting objects obscures local geometry, preventing visual observations from fully capturing contact locations. Visually similar scenes may also differ subtly in the relative positions of interacting objects, leading to different contact states. We propose 3DTouch, a tactile-geometric conditioning approach for vision-language-action (VLA) models. 3DTouch constructs a shared 3D visuo-tactile representation by expressing RGB-D scene points and dense five-finger tactile measurements in the robot-base frame, preserving each taxel's spatial location and force vector. Hand-object and object-object relations derived from hand landmarks and pose-aligned reconstructed surfaces explicitly describe the relative arrangement of interacting entities. Together, these representations condition the VLA action expert on spatially localized contact forces and relative surface geometry, providing explicit cues for contact adjustment and object alignment. We evaluate 3DTouch on five real-world contact-rich dexterous manipulation tasks using a UR7e robot arm equipped with an XHand dexterous hand. 3DTouch improves the average success rate by 42 percentage points over the corresponding VLA baseline and by 20 percentage points over the strongest evaluated alternative. Ablation studies reveal the complementary benefits of scene geometry and spatial tactile feedback, with further gains from shared spatial grounding and explicit geometric relations.

0.19

A Tendon-Driven Five-Fingered Hand with Distributed Tactile Perception for Dexterous Manipulation

cs.RO cs.AI ·2026-08-26 ·Huayang Chen, Longhui Qin
published similarity 0.65
Abstract · Accepted by International Conference on Service Robotics (ICoSR) 2026

To apply the techniques of embodied artificial intelligence to human-oid robots for complex manipulations, dexterous robotic hands are indispensable, which are restricted by the dexterity and tactile perception capability. In this work, we proposed a novel design of tendon-driven five-fingered hand with dis-tributed tactile perception. With a soft-rigid-hybrid structure employed, both compliance and operational force are endowed to the hand. Dual-modality tactile sensing elements are distributed on the distal and middle phalanges of all five fingers, enabling the simultaneous detection of static contact and dynamic force variations. Manipulation experiments, including counting gestures, finger-to-thumb pinching, object grasping, and bottle-grasp tactile recording, demonstrate the feasibility of the integrated actuation-perception system.

0.46