CS Paper Radar

GlowTact: Simple and Compact Vision-Based Tactile Sensing with High Sensitivity and Spatial Resolution

Yuxiang Ma, Megha Tippur, Pengfei Ye, Sandra Q. Liu, Haonan Chen, Francis Richard Cottrell, Edward Adelson

cs.RO ·submitted 2026-09-26 11:01 UTC · v2

Abstract

Vision-based tactile sensors (VBTS) provide rich contact information for robotic manipulation, but existing designs can be hard to simplify and adapt to the size and constraints of humanoid fingertips. We introduce \textbf{GlowTact}, a pressure-responsive vision-based tactile sensing mechanism that directly visualizes contact pressure. \textbf{GlowTact} requires only single-color, non-directional illumination, and the raw tactile image directly represents the pressure distribution without explicit geometry reconstruction. This simple sensing principle enables compact, customizable tactile sensors while preserving high sensitivity and rich spatial detail. We demonstrate gram-scale contact detection, accurate normal-force estimation, and reconstruction of fine contact geometry, including M1 screw threads. These results establish \textbf{GlowTact} as a practical new sensing technology for compact humanoid fingertips, combining a durable nitrile membrane and simple optical design with sensitive and information-rich tactile perception.

Comment
Project webiste: https://glowtact.github.io/

Closest papers

Nearest neighbours by meaning across the whole index.

Tactile Sensing Array for Multi-Phalanx Sensing in Humanoid Hands

cs.RO cs.ET ·2026-09-24 ·Neel Adwani, Muhaiminul Islam Akash, Rituja Bhattacharya, Cong Wang
publishedhot direction similarity 0.72
Abstract · Accepted to be presented at IROS Workshop Touch2Action

Humanoid hands require tactile feedback across the whole finger, not just the fingertip, to grasp and manipulate objects properly. Vision and proprioception alone cannot reliably provide this information, particularly when the hand's own fingers occlude the camera's view of the grasp. We present a low-cost tactile array for a humanoid finger, made from Velostat and conductive tape. The fingertip carries seven contact points including a 2x3 matrix wrapped across its front, left, and right faces, and a separate contact point at the tip. The proximal and middle phalanges each carry a single front-facing contact line. We measure the sensor's hysteresis and recovery time after release, through repeated loading and press-release tests. We also test a compliant, 3D-printed contact structure with a gap and a bump, inspired by similar designs in prior work, and show it cuts recovery time by 74% compared to a flush-contact baseline. We then show the sensor can produce distinct activation patterns for different contact geometries (flat, edge, corner) at the fingertip, and that it registers contact across all three phalanges during a grip. Finally, we discuss the limits of our fabrication changes and point to software-based compensation as a promising way to more directly fix the remaining hysteresis in the future.

0.40

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

cs.RO cs.AIcs.LG ·2026-11-02 ·Binglin, Wang, Xiaole, Jiang, Zicheng Teng +5 more
code/data similarity 0.71
Abstract · Project page: https://panotac.github.io

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

0.19

Tactile Reconstruction of Contact Task Frames and Forces for Hybrid Force/Motion Control

cs.RO ·2026-10-07 ·Antonio Rapuano, Simone Orelli, Barbara Bazzana, Antonio Franchi, Alessandro De Luca
similarity 0.69
Abstract · 14 pages, 9 figures, 7 tables. Video: https://youtube.com/playlist?list=PLejKMZmW8AvI. Dataset: https://doi.org/10.5281/zenodo.23209032

Hybrid force/motion control requires knowledge of the interaction force and of a task frame defining the force- and motion-controlled directions. These quantities are usually obtained from force/torque sensing or model-based residuals, often assuming also a nominal environment model. This work addresses the online estimation of the contact force and a possibly time-varying task frame using only soft optical tactile sensing, under the assumption of locally planar contact with a negligible contact moment. The proposed method maps a single image of the deformed elastomer of a soft optical tactile sensor to observable contact variables: indentation depth, two surface-to-sensor tilt angles, and 3D contact force, each with a per-sample uncertainty estimate. The mapping is learned through a self-labeling acquisition procedure, in which a manipulator imposes controlled contacts while an auxiliary Force/Torque sensor is used offline to provide ground-truth labels. The tactile measurement is then fused with robot proprioceptive data in an Extended Kalman Filter, producing a continuously updated estimate of the contact task frame and of the interaction force. Control experiments with a DigiTac sensor mounted on a UR10 manipulator demonstrate closed-loop contact force regulation against a flat rigid board in linear and angular motion by a human operator, with touch as the only exteroceptive feedback.

0.23

SoTa: Soft Tactile Skins for Dexterous Manipulation

cs.RO cs.LG ·2026-10-01 ·Jingyun Yang, Baiyu Shi, Timothy Yu, Haitian Liu, Alberta Longhini +4 more
code/data similarity 0.68
Abstract · The first three authors contributed equally. Project website: https://sota-skin.github.io

A growing body of work suggests that tactile sensing gives robot policies contact information that complements vision in dexterous manipulation. However, visuo-tactile robot data remains scarce: dexterous demonstrations require teleoperating robots, which limits dataset scale. Human demonstrations are far cheaper to collect and offer a path to scale this data, but only if human and robot hands carry tactile sensors with corresponding signals. This requires sensors that conform to different hand geometries, cover the full hand, and share a common layout across embodiments. We present SoTa, a low-cost capacitive tactile skin that provides full-hand coverage on humans and robots while preserving a shared layout of 202 taxels across corresponding finger and palm regions. Our multilayer design with fabric electrodes enables in-house fabrication of thin, soft skins with customizable geometry for under $10 in materials per skin. The sensor retains over 97% of its initial response span after 10,000 loading-unloading cycles with traces retaining continuity through 1,280 tight-fist folding cycles. The shared taxel layout supports human-robot co-training with a common tactile encoder and no learned cross-sensor mapping. Across three contact-rich manipulation tasks, tactile observations improve in-distribution success over vision-only policies. With a fixed robot demonstration budget, adding human demonstrations more than doubles mean success across eight evaluation conditions, from 22.8% to 45.9%, improving success in all five out-of-distribution conditions. We plan to open-source the resources needed to fabricate and operate these skins.

0.20

SpectraTac: A Compact Camera-Free Optical Tactile Sensor with Distributed Color Sensing

cs.RO ·2026-08-31 ·Hao Wu, Haotian Guo, Yu Feng, Yutong Wang, Yanzhe Wang +1 more
similarity 0.67
Abstract

Tactile sensing is essential for physical interaction in robotics and human--machine systems. However, combining rich tactile information with compact hardware, low cost, and low computational overhead remains challenging. This work presents SpectraTac, a compact, camera-free optical tactile sensor that combines active red--green--blue (RGB) illumination with spatially distributed color sensing. Contact deforms a compliant transparent elastomer and modulates its internal light field, producing spatially differentiated changes in color and intensity. Three distributed color sensors capture these responses as low-dimensional spatio-spectral features, avoiding cameras, imaging optics, and high-dimensional image processing. The device measures 19.2 mm in diameter and 4 mm in height, with a material cost below USD~5. A data-driven decoding framework simultaneously estimates three-dimensional (3D) force and the contact region from the optical measurements. For 3D force prediction, the sensor achieved mean absolute errors (MAEs) of 0.161, 0.164, and 0.429 N along the x-, y-, and z-axes, respectively. The nine-region contact-classification accuracy was 99.9%. We further evaluated real-time 3D force tracking and contact-region-based human--machine interaction through an interactive control task. These results indicate that distributed color-resolved optical sensing offers a compact, low-cost alternative to camera-based tactile sensing for robotics, wearable sensing, and interactive systems.

0.35

TapTacTouch: Shape Completion from Sparse Tactile Contacts with Geometric Priors

cs.RO ·2026-11-18 ·Yoobin Shin, Jaeyoung Lee, Jieun Kang, Hyun Song, Woojin Kim +1 more
similarity 0.67
Abstract · 8 pages, 5 figures, 4 tables

3D object reconstruction is essential for robotic perception and manipulation, yet conventional approaches predominantly rely on visual observations that can be limited by occlusion or unavailable in visually constrained environments. In this work, we propose a vision-free, training-free, and category-agnostic framework for reconstructing 3D object meshes from sparse tactile contacts without relying on pretrained shape models. A 6-DoF robotic arm equipped with a 20-DoF multi-finger robotic hand collects tactile observations using 3x3 pressure sensor arrays mounted on the finger pads. The acquired tactile measurements are transformed into 3D contact constraints through robot kinematics and integrated into a multi-scale Gaussian Process Implicit Surface (GPIS). To address sparse and incomplete surface observations, the proposed method incorporates contact confidence weighting, weak pseudo-surface constraints, and an observation-driven geometric prior to preserve local surface geometry and provide structural guidance in unobserved regions. Real-world experiments on six objects achieve a Chamfer Distance (CD) of 1.610, an Earth Mover's Distance (EMD) of 7.738, and an F-Score of 95.00, with reconstruction completed in an average of 49.99 s per object. These results demonstrate that sparse tactile sensing can provide sufficient geometric information for continuous 3D object reconstruction without visual or semantic information.

0.23

VecTile: A Low-Cost Flexible Tactile Array for 3-DoF Force Sensing

cs.RO ·2026-10-22 ·Jian Hou, Xin Zhou, Adam J. Spiers
similarity 0.66
Abstract · 8 pages, 8 figures. Submitted to IEEE International Conference on Robotics and Automation (ICRA) 2027

Tactile sensing provides robots with contact information difficult to obtain from vision alone. Shear force is particularly important for understanding tangential contact, guiding corrective motions, and maintaining grasp stability, yet flexible and low-cost tactile arrays often measure only normal force. We introduce VecTile, a low-cost, 6 mm thin, flexible tactile array capable of three-axis force sensing. VecTile combines a piezoresistive layer with passive silicone nubs that convert normal and shear forces into distinguishable pressure patterns. The sensor can be fabricated in-house without specialized equipment. The complete system costs less than 35 USD for a 4x4 array. We validate the sensing mechanism through finite element analysis and hardware experiments. In controlled single-taxel tests over 1-5 N normal force and up to 1.5 N shear force, VecTile achieves root-mean-square errors of 0.39 N and 0.16 N for normal and shear forces. A VecTile calibrated while flat retains accuracy when curved, while a five-minute manual calibration is sufficient for practical use. Two applications demonstrate its utility. First, shear readings are sensitive enough to stop a sharp scalpel from puncturing a balloon after contact. Second, the sensor substantially improves Diffusion Policy-guided power-plug insertion. All designs and code will be released upon paper acceptance. Project website: https://jiannnh.github.io/VecTile/.

0.20

ZeroTouch: Tactile-Supervised Visual Contact Estimation for Contact-Rich Manipulation

cs.RO ·2026-09-18 ·Dmitriy Kosenkov, Daniia Zinniatullina, Miguel Altamirano Cabrera, Iana Zhura, Mikhail Derevianchenko +1 more
similarity 0.66
Abstract

Reliable robotic grasping benefits from estimating the evolving physical interaction and selecting a grasp-dependent compression target. Tactile sensors provide direct interaction measurements but require dedicated hardware at deployment. We introduce ZeroTouch, a tactile-supervised framework that predicts dense contact deformation, the instantaneous six-axis wrench, and a grasp-dependent desired compression target from wrist RGB observations, gripper state, and local gravity direction. Tactile measurements are used only as privileged supervision during training and are not required at deployment. On the full validation set, the complete architecture reduces normal-force MAE from 2.017 N for a state-only baseline to 0.531 N. In physical evaluation with 20 trials per condition, ZeroTouch achieves 95% success on an unseen object, 80% in a seen-object/unseen-grasp condition, and 90% under a content/load shift. Under the same evaluation protocol, OpenVLA achieves 25%, 40%, and 55%, while SmolVLA achieves 10%, 25%, and 35%, respectively.

0.20