CS Paper Radar

X-Hinges: 3D Printing Self-Sensing Compliant Mechanisms for Continuous and Multi-DOF Motion Sensing

Xiang Chang, Haiyang Yan, Stefanie Mueller, Jiaji Li

cs.HC ·submitted 2026-09-10 04:33 UTC · v1
top venue

Abstract

We present X-Hinges, a design and fabrication method for self-sensing compliant mechanisms based on multi-material FDM 3D printing. By co-printing two conductive filaments of different conductivities within a compliant body, we embed resistive sensing elements directly during fabrication without post-assembly, enabling continuous motion sensing across multiple degrees of freedom in a single print. The structure supports three degrees of freedom, each equipped with a dedicated sensing element configuration for multi-DOF motion estimation. We develop a precision data acquisition system and data-driven regression models that enable continuous, real-time motion sensing. We also introduce an interactive design tool for customizing the geometry, mechanical properties, degrees of freedom, and sensing configurations of X-Hinges. The tool also supports augmenting existing 3D models with self-sensing structures, endowing ordinary objects with continuous multi-DOF sensing capabilities. Finally, we present a set of application examples demonstrating the capability of X-Hinges for fabricating personalized interactive interfaces.

Comment
Accepted at ACM UIST 2026. 15 pages, 24 figures. Author's accepted manuscript
DOI
10.1145/3830398.3830598

Closest papers

Nearest neighbours by meaning across the whole index.

OpenTac: An Open Ecosystem for Customizable, Scalable, and Transferable 3D Tactile Sensing

cs.RO eess.SPeess.SY ·2026-10-22 ·Ariel Slepyan, Geeta Chandra Raju Bethala, Jiafeng Gu, Anagha Rajendra Dangle, Yinzhe Zhou +10 more
code/data similarity 0.63
Abstract · 15 pages, 15 figures. Project website, open-source hardware and software, and demonstration videos: https://opentac.github.io

We present OpenTac, a novel sensor and a full-stack ecosystem for tactile skins that are highly customizable, scalable, and readily deployed in downstream robot control and learning applications. Our core contribution is twofold. First, we develop a scalable resistive tactile skin with a structured deformable overlay that converts tangential loading into spatially varying pressure. Differential responses across neighboring "taxels" support decoding of local shear vectors, and the common-mode response encodes normal force. Second, we provide a highly customizable sensor design tool that is able to automatically generate fabrication files for these tactile skins from 2D outlines and developable 3D surfaces, including from abstract descriptions such as text. We develop an ecosystem around the OpenTac sensor, including the CAD design tool, a sensor simulator, cross-sensor transfer, and fast/adaptive data acquisition. We demonstrate the broad applicability of the OpenTac-CAD sensor design tool by designing and fabricating more than 30 sensors across a variety of robot embodiments. We characterize the three-dimensional tactile fields produced by OpenTac with a commercial, high-precision force/torque sensor. We demonstrate the broad applicability of 3D tactile sensing across contact-rich feedback control and manipulation policy learning on four real-world robot embodiments. Additionally, adaptive acquisition enables kilohertz-rate partial readouts, and our readout circuitry enables high dynamic range (HDR) acquisition, measuring, for example, a 3.7 kg weight stack and a 20 g weight on the same sensor in the same frame. We provide all hardware, software, and result videos at opentac.github.io

0.21

Print&Fold: Printing and Folding Shape-accurate 3D Models

cs.HC ·2026-08-13 ·Archit Kumar, Zachary Grimm, Mingsheng Xu, Shlok Rathi, Martin Nisser
top venue similarity 0.60
Abstract · Proceedings of ACM UIST 2026

This paper introduces Print&Fold, a tool to allow FDM 3D printing of complex models with less time and material while preserving shape accuracy. Key to this work is a folding algorithm that planarizes foldable faces internal to the 3D model. While folding techniques typically discretize a target model's surface, thereby fabricating low fidelity counterparts, our method preserves the surface features in the physical print. Our design tool allows users to unfold 3D models to be FDM-printed flat before manually folding these into their target shapes. We showcase a variety of applications and evaluate the material and time savings across a range of 3D models.

0.34

3D-Force Estimation for Dual-arm Manipulation of Deformable Linear Objects via Factor Graphs

cs.RO ·2026-10-26 ·Annika Delucchi, Vincenzo Di Paola, Bruno Marco Quadrelli, Matteo Zoppi
similarity 0.59
Abstract

Estimating forces acting on Deformable Linear Objects (DLOs) is challenging due to their underactuated nature. However, reliable contact estimation is crucial to precisely control them and enable safe manipulation tasks. Differently from the various approaches presented in the literature, this work adopts a probabilistic formulation where the DLO state and sensor data are related through conditional distributions. In particular, factor graphs are used to determine the magnitude, direction, and location of a 3D force acting on a DLO, while simultaneously reconstructing its shape. Since DLOs are not actuated and are typically thin, like cables and wires, strain gauges and actuation readings are usually impractical. Therefore, to overcome this issue, this work is tested using one type of sensing information only, thus developing a generic technique suited for a wider variety of tasks. Realistic tests are performed by introducing noise into the measurements while the DLO follows a prescribed path in the presence of external forces that are accurately estimated.

0.33

Print-Aware Synthesis and Physical Design Methodologies for 3D-Printed Microfluidic Biochips

cs.ET ·2026-08-17 ·Yushen Zhang, Tsun-Ming Tseng, Ulf Schlichtmann
published similarity 0.59
Abstract · Accepted for publication in the 2026 IEEE Computer Society Annual Symposium on VLSI (ISVLSI)

Microfluidic devices are widely used in diagnostics, chemical synthesis, and biological analysis, but their development often depends on complex fabrication and design processes. Resin-based three-dimensional (3D) printing has emerged as a promising alternative to conventional microfabrication because it enables low-cost, rapid prototyping of complex multi-layer structures. However, the practical realization of 3D-printed microfluidic biochips remains challenging due to manual and expertise-intensive design workflows, the rigid nature of commonly used printing materials, and fabrication inaccuracies such as over-curing that distort internal features and may block narrow channels. In this paper, we present a cohesive design automation framework for 3D-printed microfluidics that addresses these challenges across both device design and fabrication. The framework combines interactive design tools, automated synthesis methods for functional 3D microfluidic devices, techniques for developing low-cost 3D-printed mixers, and design-for-manufacturing strategies to improve print fidelity on low-cost resin printers.

0.32

SaddleSense: Saddle-Shaped Modules for 3D Shape Sensing with Single-Axis Off-the-Shelf Bend Sensors

cs.RO ·2026-10-31 ·Dong Heon Han, Runze Zuo, Chankyo Kim, Saima Jamal, Daniel Bruder
similarity 0.57
Abstract

Accurate posture feedback is essential for precise control of continuum robots. Off-the-shelf bend sensors measure curvature about only one axis; without a suitable mounting arrangement, they can restrict robot motion and provide incomplete posture information. SaddleSense introduces a 3D-printed thermoplastic polyurethane (TPU) saddle-shaped lattice that holds one commercial bend sensor along each curved edge. Because each sensor flexes within its own channel rather than spanning the segment axially, the lattice converts multi-axis body deformation into sensor curvature without tying segment length to sensor length. Each four-sensor module accommodates two-axis bending, contraction, and extension while quantifying all three deformation modes across its four readings. A hybrid calibration maps the sensor readings to piecewise constant curvature (PCC) parameters using a learned model paired with a physics-based fallback for out-of-distribution inputs. We demonstrate a six-module prototype with 24 off-the-shelf bend sensors on a 430~mm continuum body. Using only each module's four local readings, the physics-based model alone achieves a tip position root mean square error (RMSE) of 29.9~mm (7.0\% of body length). The data-driven model reduces the tip RMSE to 13.2~mm (3.1\%) on held-out samples of motions similar to the training set and 15.8~mm (3.7\%) on separately recorded trials. Reducing each module from four sensors to one nearly triples the tip error.

0.32

Topology optimisation and simulated state reconstruction for self-sensing piezoresistive grippers

cs.CE ·2026-09-13 ·Connor N Mallon, Zachary J Wegert, Anthony P Roberts, Joshua Pinskier, Harry Bowman +1 more
similarity 0.57
Abstract

We consider the computational design of a self-sensing robotic gripper that has the potential to reduce reliance on traditional external sensors. We computationally investigate the potential of a novel sensing method that exploits the coupled electromechanical properties of piezoresistive materials to enable mechanical perception using sparse electrical measurements. In this theoretical proof-of-concept, we show that under the idealised assumptions of linear constitutive relationships and quasi-static gripper operation, it is possible to reconstruct simple contact shapes and gripper displacement fields using a small number of simulated electrical measurements, suggesting the potential of the proposed sensing technique. We use topology optimisation to promote the quality of displacement state recovery by adding an electrical performance objective to the mechanical compliance requirement of the gripper. Using the proposed reconstruction technique, we showcase the improved reconstruction ability of an electrically optimised gripper design through an increased robustness to noisy synthetic measurements compared to a gripper designed with only a mechanical objective in the topology optimisation problem. In the future, detailed inclusion of non-linear effects and experimental realisation of this theoretical proof-of-concept may help remove the constraints of traditional sensors for robotic handling, potentially facilitating sensing in settings where current sensing systems are impractical.

0.29

TCAM for Autonomous Deformable Manipulation: The RMC2 Champion System for WBCD 2026 Track 4

cs.RO ·2026-08-11 ·Guangrui Shen, Zhili He, Shigang Wang, Yuanjun Sun, Qing Yu
similarity 0.57
Abstract

This technical report describes the RMC2 Team's champion solution for the WBCD 2026 Track 4: Deformable Manipulation Challenge. The task requires a robot to pick a single T-shirt from a stack, load it onto a printing pallet, align the collar with a target area, and smooth the printing region, a sequence that involves single-layer separation, deformable transport, precise placement, and contact-rich surface adjustment. The competition strongly incentivizes fully autonomous execution, motivating the development of an autonomous solution. We built a fully autonomous system around the TCAM (TermiBrain Causal Action Model) framework, with the design principle that hardware, perception, data, and learning should jointly reduce the physical interaction complexity the policy must handle. A custom 3D-printed gripper designed for single-layer fabric separation improves picking reliability on a dual-arm ARX X5 platform. A wrist-centric four-camera setup pairs upper fisheye cameras for task-level context with lower RGB cameras for close-range gripper-cloth contact observation. We combine portable UMI-style demonstrations with real-robot demonstrations collected on the deployable platform to provide both broad manipulation priors and deployment-specific dynamics. TCAM ties these components into a closed loop: each trajectory is analyzed to identify the physical factors contributing to its outcome, driving targeted data recollection and policy fine-tuning. The policy outputs 30-step end-effector delta-pose action chunks from a multi-view VLA backbone. In the final competition, our system loaded 25 T-shirts at an average of approximately 23 seconds per attempt, with 22 achieving the required surface smoothness, securing first place in Track 4.

0.04

VecTile: A Low-Cost Flexible Tactile Array for 3-DoF Force Sensing

cs.RO ·2026-10-22 ·Jian Hou, Xin Zhou, Adam J. Spiers
similarity 0.57
Abstract · 8 pages, 8 figures. Submitted to IEEE International Conference on Robotics and Automation (ICRA) 2027

Tactile sensing provides robots with contact information difficult to obtain from vision alone. Shear force is particularly important for understanding tangential contact, guiding corrective motions, and maintaining grasp stability, yet flexible and low-cost tactile arrays often measure only normal force. We introduce VecTile, a low-cost, 6 mm thin, flexible tactile array capable of three-axis force sensing. VecTile combines a piezoresistive layer with passive silicone nubs that convert normal and shear forces into distinguishable pressure patterns. The sensor can be fabricated in-house without specialized equipment. The complete system costs less than 35 USD for a 4x4 array. We validate the sensing mechanism through finite element analysis and hardware experiments. In controlled single-taxel tests over 1-5 N normal force and up to 1.5 N shear force, VecTile achieves root-mean-square errors of 0.39 N and 0.16 N for normal and shear forces. A VecTile calibrated while flat retains accuracy when curved, while a five-minute manual calibration is sufficient for practical use. Two applications demonstrate its utility. First, shear readings are sensitive enough to stop a sharp scalpel from puncturing a balloon after contact. Second, the sensor substantially improves Diffusion Policy-guided power-plug insertion. All designs and code will be released upon paper acceptance. Project website: https://jiannnh.github.io/VecTile/.

0.20