CS Paper Radar

Print&Fold: Printing and Folding Shape-accurate 3D Models

Archit Kumar, Zachary Grimm, Mingsheng Xu, Shlok Rathi, Martin Nisser

cs.HC ·submitted 2026-08-13 14:14 UTC · v1
top venue

Abstract

This paper introduces Print&Fold, a tool to allow FDM 3D printing of complex models with less time and material while preserving shape accuracy. Key to this work is a folding algorithm that planarizes foldable faces internal to the 3D model. While folding techniques typically discretize a target model's surface, thereby fabricating low fidelity counterparts, our method preserves the surface features in the physical print. Our design tool allows users to unfold 3D models to be FDM-printed flat before manually folding these into their target shapes. We showcase a variety of applications and evaluate the material and time savings across a range of 3D models.

Comment
Proceedings of ACM UIST 2026
DOI
10.1145/3830398.3830680

Closest papers

Nearest neighbours by meaning across the whole index.

Toolpath Overhang Optimization for the Large-Format 3D Printing of Bespoke Shapes

cs.GR ·2026-10-30 ·Yefan Zhi, Masoud Akbarzadeh
similarity 0.62
Abstract

This paper presents a closed curve trimming algorithm for overhang optimization in large-format support-free 3D printing of bespoke manifold shapes. Large-format 3D printing enables efficient fabrication of complex, bespoke shapes. Because of the material properties and surface quality requirements, such shapes are typically printed without support structures and have to be designed as support-free. Most current methods of overhang optimization are limited to certain types of geometry and do not apply to bespoke shapes. Our method directly optimizes sliced toolpath curves with minimal geometric modification. Given an overhang limit, it ensures that all resulting toolpath curves are strictly within the overhang limit while preserving their orientation and preventing intersections. The algorithm is based on curve offsetting and trimming, and is applicable to closed toolpath curves that represent the boundaries of a solid volume.

0.26

One Print, Many Moves: Monolithic Origami-inspired Folding Actuator for Composable Soft Multi-DoF Systems

cs.RO ·2026-09-01 ·Jaehyung Jang, Zhenish Zhakypov, Jasmin Elena Palmer, Melissa Klein, Jee-Hwan Ryu +1 more
similarity 0.61
Abstract · 26 pages, 7 figures

Conventional soft robot actuators excel in compliance, but their uncontrolled deformations compromise accuracy and hinder scaling to multi-degree-of-freedom (DoF) systems. We introduce a MONOlithic ORIGAMI-inspired soft folding actuator design (MONORIGAMI) that establishes a design strategy based on spatially programmed stiffness anisotropy to preserve material compliance along desired folding directions while selectively restricting deformation in unwanted directions. The actuator leverages stiffness tiers based on material thickness, patterned in an origami-inspired geometry with facets and creases, converting unconstrained soft deformation into accurate, repeatable, and composable folding motions without additional reinforcements. The design is fully 3D-printable through a single-material, single-print process that requires no assembly. Each actuator serves as a scalable motion primitive, and linking and orienting multiple actuators mechanically programs multi-DoF trajectories. Using the same fundamental module, we demonstrate three 3D-printed soft multi-DoF robotic systems spanning distinct application domains: (1) a compact 4-DoF wearable haptic device for high-fidelity cutaneous feedback in virtual reality (VR), (2) a 3-DoF joystick for kinesthetic feedback in teleoperation, and (3) a modular robotic gripper capable of underwater operation with geometry-encoded grasp trajectories. These systems demonstrate the module's capabilities for compact multi-axis integration, controlled physical interaction, and geometry-programmed operation across different environments. Together, these results show that MONORIGAMI provides a general, composable, accessible, reliable, and scalable platform for high-precision soft multi-DoF robotics, addressing long-standing limitations in both soft actuator design and fabrication.

0.14

X-Hinges: 3D Printing Self-Sensing Compliant Mechanisms for Continuous and Multi-DOF Motion Sensing

cs.HC ·2026-09-10 ·Xiang Chang, Haiyang Yan, Stefanie Mueller, Jiaji Li
top venue similarity 0.60
Abstract · Accepted at ACM UIST 2026. 15 pages, 24 figures. Author's accepted manuscript

We present X-Hinges, a design and fabrication method for self-sensing compliant mechanisms based on multi-material FDM 3D printing. By co-printing two conductive filaments of different conductivities within a compliant body, we embed resistive sensing elements directly during fabrication without post-assembly, enabling continuous motion sensing across multiple degrees of freedom in a single print. The structure supports three degrees of freedom, each equipped with a dedicated sensing element configuration for multi-DOF motion estimation. We develop a precision data acquisition system and data-driven regression models that enable continuous, real-time motion sensing. We also introduce an interactive design tool for customizing the geometry, mechanical properties, degrees of freedom, and sensing configurations of X-Hinges. The tool also supports augmenting existing 3D models with self-sensing structures, endowing ordinary objects with continuous multi-DOF sensing capabilities. Finally, we present a set of application examples demonstrating the capability of X-Hinges for fabricating personalized interactive interfaces.

0.47

Print-Aware Synthesis and Physical Design Methodologies for 3D-Printed Microfluidic Biochips

cs.ET ·2026-08-17 ·Yushen Zhang, Tsun-Ming Tseng, Ulf Schlichtmann
published similarity 0.59
Abstract · Accepted for publication in the 2026 IEEE Computer Society Annual Symposium on VLSI (ISVLSI)

Microfluidic devices are widely used in diagnostics, chemical synthesis, and biological analysis, but their development often depends on complex fabrication and design processes. Resin-based three-dimensional (3D) printing has emerged as a promising alternative to conventional microfabrication because it enables low-cost, rapid prototyping of complex multi-layer structures. However, the practical realization of 3D-printed microfluidic biochips remains challenging due to manual and expertise-intensive design workflows, the rigid nature of commonly used printing materials, and fabrication inaccuracies such as over-curing that distort internal features and may block narrow channels. In this paper, we present a cohesive design automation framework for 3D-printed microfluidics that addresses these challenges across both device design and fabrication. The framework combines interactive design tools, automated synthesis methods for functional 3D microfluidic devices, techniques for developing low-cost 3D-printed mixers, and design-for-manufacturing strategies to improve print fidelity on low-cost resin printers.

0.32

A Physics-Based Closed-Loop Robotic Bioprinting Framework Towards Volumetric Muscle Loss Treatment

cs.RO ·2026-09-10 ·Omid Rezayof, Jerin T. Andrews, Ehsan Zobeidi, Ali Ghasemkhani, Meenakshi Kamaraj +3 more
published similarity 0.57
Abstract · This paper has been accepted for publication and presentation in 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (I…

Robotic bioprinting and Direct Ink Writing (DIW) are being explored towards the treatment of Volumetric Muscle Loss (VML). While previous studies have shown the importance of proper parameter selection on the print outcome, existing approaches often rely on time- and material-intensive design of experiments methods, or require large, well-curated datasets for training machine learning models. In this paper, we propose a physics-based closed-loop robotic bioprinting system capable of near real-time parameter adaptation. The system integrates a 3D point cloud camera and fully autonomous vision-based algorithms to provide quantitative evaluation of printed constructs. This evaluation is fed into a controller that adjusts printing parameters to achieve a desired bead thickness. To assess the framework's performance, four experimental configurations were tested, each repeated three times. In these tests, printing began from an arbitrary initial parameter value, and the controller was tasked with adjusting the parameters to reach the desired thickness. The system converged in all trials, achieving a tracking error below 0.5 mm within an average of 5.2 seconds from the start of printing. The low standard deviation of the converged pressure over different tests (0.04 bar on average) demonstrates robustness and repeatability. Additional experiments were conducted with the controller turned off, enabling direct comparison with open-loop DIW bioprinting, further confirming the effectiveness of the proposed closed-loop framework in achieving the desired bead geometry.

0.42

Inverse origami inspired by insect morphogenesis: geometric design of wrinkle structures for curved surface formation

cs.GR cond-mat.softphysics.app-phphysics.bio-ph ·2026-10-26 ·Kentaro Morikawa, Yuuki Shimizu, Nen Saito, Yasuhiro Inoue
unusual similarity 0.56
Abstract · 10 pages, 7 figures; SI Appendix: 4 pages

Insect exoskeletons abruptly acquire complex three-dimensional forms during metamorphosis from larva to pupa. This transformation occurs through the unfolding of preformed wrinkle structures inside the larval body under internal pressure. Inspired by this process, we investigate an inverse-origami strategy for fabricating curved surfaces. Whereas conventional origami produces three-dimensional objects by folding a flat sheet, this strategy produces curved surfaces by unfolding preformed wrinkle structures. The central design problem is to derive a wrinkle structure from a prescribed target surface. Our key idea is to regard a wrinkle structure as a unidirectional stretching field, which specifies at each point the stretch produced when the structure unfolds. We first derive such a field from the target surface geometry and then translate it into spatially varying wrinkle directions and spacing, so that the wrinkle structure unfolds into the target. The resulting numerical designs approximate the intrinsic metric of the target surface. We demonstrate the method on multiple target surfaces through numerical construction, mechanical unfolding simulations, and 3D-printed prototypes. This work provides a biologically inspired geometric design principle for encoding prescribed surface shapes in wrinkle structures, as well as a framework for designing and fabricating deployable curved surfaces.

0.35

SNAP3D: Physically Grounded 3D Parts for Assembly from a Single Image

cs.GR cs.CV ·2026-09-11 ·Yu-Rou Tuan, Hao-Tang Tsui, Nicolas Ugrinovic, Kris Kitani, Xiaoxuan Ma
code/data similarity 0.56
Abstract · Project page: https://lucytuan.github.io/SNAP3D/

Part-aware 3D asset generation enables applications such as editing, articulation, simulation, and fabrication, yet existing methods can generate visually complete individual parts without ensuring that they form a valid physical assembly. Consequently, generated neighboring parts may interpenetrate, lack valid connections, or collapse under gravity. We propose a physics-guided framework for improving single-image part-aware 3D generation with physically compatible geometry and stable connections. Our method resolves inter-part penetration, recovers a contact graph between neighboring parts, and introduces parameterized connectors at their contact surfaces. Using feedback from physical simulation, we refine connector placement, orientation, and dimensions to improve assembly stability while preserving the generated geometry. We further introduce a physics-based evaluation protocol that complements conventional geometric metrics by directly testing assembly validity and stability under gravity. Experiments comparing against multiple part-aware 3D generators show substantial improvements in physical realizability and stability while maintaining geometric quality. We additionally validate the resulting parts through 3D printing and real-world assembly.

0.38

Task-Driven 3D Printability Assistance via Geometry- and Knowledge-Grounded LLM Reasoning

cs.AI ·2026-08-22 ·Zhaoda Du, Qiaojie Zheng, Xiaoli Zhang
benchmark similarity 0.54
Abstract

Printability assessment in additive manufacturing is typically conducted at the geometry level before printing to determine whether a computer-aided design (CAD) model or stereolithography (STL) file can be successfully fabricated. Task suitability, in contrast, is usually evaluated after printing to determine whether the fabricated part satisfies the requirements of its intended use. As a result, for non-expert users to print functional parts, unsuitable material or process choices may only be identified after fabrication, leading to repeated printing, material waste, and user frustration. To address this challenge, this paper leverages the reasoning and language-understanding capabilities of large language models (LLMs), while grounding the reasoning with geometry evidence and structured material/printer knowledge to generate reliable pre-print recommendations. Given a stereolithography (STL) model and a natural-language task description, the framework generates a structured recommendation covering printability, material choice, process parameters, design guidance, risks, and explanations. We evaluate the framework on focused STL benchmark scenarios with novice-style task descriptions. The proposed method achieves 75.0% printability over 96 physical validation trials, with 88.9% task suitability among successfully printed samples. It also improves Gemini 2.5 Flash-Lite material-selection accuracy from 37.5% under pure LLM to 90.0%. Expert evaluation further shows improved report quality, while post-print feedback improves recommendations on selected problematic cases. These results suggest that user task intent, geometry evidence, and structured material knowledge are all important for reliable task-driven printability assistance.

0.29