CS Paper Radar

Inverse origami inspired by insect morphogenesis: geometric design of wrinkle structures for curved surface formation

Kentaro Morikawa, Yuuki Shimizu, Nen Saito, Yasuhiro Inoue

cs.GR cond-mat.softphysics.app-phphysics.bio-ph ·submitted 2026-10-26 06:24 UTC · v1
unusual

Abstract

Insect exoskeletons abruptly acquire complex three-dimensional forms during metamorphosis from larva to pupa. This transformation occurs through the unfolding of preformed wrinkle structures inside the larval body under internal pressure. Inspired by this process, we investigate an inverse-origami strategy for fabricating curved surfaces. Whereas conventional origami produces three-dimensional objects by folding a flat sheet, this strategy produces curved surfaces by unfolding preformed wrinkle structures. The central design problem is to derive a wrinkle structure from a prescribed target surface. Our key idea is to regard a wrinkle structure as a unidirectional stretching field, which specifies at each point the stretch produced when the structure unfolds. We first derive such a field from the target surface geometry and then translate it into spatially varying wrinkle directions and spacing, so that the wrinkle structure unfolds into the target. The resulting numerical designs approximate the intrinsic metric of the target surface. We demonstrate the method on multiple target surfaces through numerical construction, mechanical unfolding simulations, and 3D-printed prototypes. This work provides a biologically inspired geometric design principle for encoding prescribed surface shapes in wrinkle structures, as well as a framework for designing and fabricating deployable curved surfaces.

Comment
10 pages, 7 figures; SI Appendix: 4 pages

Closest papers

Nearest neighbours by meaning across the whole index.

One Print, Many Moves: Monolithic Origami-inspired Folding Actuator for Composable Soft Multi-DoF Systems

cs.RO ·2026-09-01 ·Jaehyung Jang, Zhenish Zhakypov, Jasmin Elena Palmer, Melissa Klein, Jee-Hwan Ryu +1 more
similarity 0.57
Abstract · 26 pages, 7 figures

Conventional soft robot actuators excel in compliance, but their uncontrolled deformations compromise accuracy and hinder scaling to multi-degree-of-freedom (DoF) systems. We introduce a MONOlithic ORIGAMI-inspired soft folding actuator design (MONORIGAMI) that establishes a design strategy based on spatially programmed stiffness anisotropy to preserve material compliance along desired folding directions while selectively restricting deformation in unwanted directions. The actuator leverages stiffness tiers based on material thickness, patterned in an origami-inspired geometry with facets and creases, converting unconstrained soft deformation into accurate, repeatable, and composable folding motions without additional reinforcements. The design is fully 3D-printable through a single-material, single-print process that requires no assembly. Each actuator serves as a scalable motion primitive, and linking and orienting multiple actuators mechanically programs multi-DoF trajectories. Using the same fundamental module, we demonstrate three 3D-printed soft multi-DoF robotic systems spanning distinct application domains: (1) a compact 4-DoF wearable haptic device for high-fidelity cutaneous feedback in virtual reality (VR), (2) a 3-DoF joystick for kinesthetic feedback in teleoperation, and (3) a modular robotic gripper capable of underwater operation with geometry-encoded grasp trajectories. These systems demonstrate the module's capabilities for compact multi-axis integration, controlled physical interaction, and geometry-programmed operation across different environments. Together, these results show that MONORIGAMI provides a general, composable, accessible, reliable, and scalable platform for high-precision soft multi-DoF robotics, addressing long-standing limitations in both soft actuator design and fabrication.

0.14

Modular fabrication and design of thick rigid-foldable origami metamaterials

cs.CE ·2026-08-20 ·Sunao Tomita, Hiroki Kobayashi, Shoko Arita, Masato Tanaka, Atsushi Kawamoto +2 more
similarity 0.57
Abstract · 20 pages, 5 figures

Origami metamaterials offer significant potential for stiff deployable structures However, fabricating load-bearing cellular structures from thick panels introduces geometric interference at non-manifold junctions. Conventional thick-panel fabrication often disrupt ideal kinematics, thereby compromising smooth motion and scalability. This study proposes a modular fabrication framework that preserves one-degree-of-freedom rigid-folding kinematics in thick and non-manifold origami metamaterials. By decomposing non-manifold junctions into a hierarchy of stacked, modular hinged panels, our approach successfully accommodates synchronized hinge motions using scissor-like linkages. Exploiting this representation, we implement a graph-based topology optimization framework that tailors macroscopic stiffness while preserving folding connectivity. We demonstrate this approach by fabricating optimized prototypes that deploy seamlessly with a one-degree-of-freedom motion. Furthermore, we demonstrate engineering scalability through the large-scale construction of extensive deployable systems assembled from modular panels, which exhibit high load-bearing capacity. These results pave the way for the practical fabrication of structural, large-scale deployable metamaterials.

0.28

Print&Fold: Printing and Folding Shape-accurate 3D Models

cs.HC ·2026-08-13 ·Archit Kumar, Zachary Grimm, Mingsheng Xu, Shlok Rathi, Martin Nisser
top venue similarity 0.56
Abstract · Proceedings of ACM UIST 2026

This paper introduces Print&Fold, a tool to allow FDM 3D printing of complex models with less time and material while preserving shape accuracy. Key to this work is a folding algorithm that planarizes foldable faces internal to the 3D model. While folding techniques typically discretize a target model's surface, thereby fabricating low fidelity counterparts, our method preserves the surface features in the physical print. Our design tool allows users to unfold 3D models to be FDM-printed flat before manually folding these into their target shapes. We showcase a variety of applications and evaluate the material and time savings across a range of 3D models.

0.34

From Biological Curves to Soft Modular Robots: Learning-Based Inverse Design with Uncertainty-Guided Refinement

cs.RO cs.LG ·2026-10-27 ·Dixiang Wang, Minghao Zha, Arifur Rahman, Yinhong Qin, Yitao Jiang +4 more
similarity 0.55
Abstract · 8 pages, 8 figures, 2 tables

Animals exhibit diverse shape-changing behaviors, from the undulatory swimming of eels to the arching movements of inchworms. Reproducing these biological shapes with modular soft robots offers a promising approach to developing versatile bioinspired robotic systems. However, translating a desired shape into a feasible robotic configuration remains challenging. Existing cable-driven modular soft robots rely on computationally expensive physics-based modeling and combinatorial search for inverse design, making it difficult to efficiently reproduce diverse target shapes. To address this challenge, we present a learning-based real-to-sim-to-real framework that translates biological curves into robotic configurations through surrogate-assisted inverse design and uncertainty-guided refinement. The proposed method combines learned inverse prediction with targeted candidate exploration, using a fast forward surrogate to evaluate and select suitable designs. The learned forward surrogate reduces deformation prediction time from $1.53 \times 10^5$ ms to 0.0008 ms, achieving approximately a $1.9 \times 10^8$-fold speedup. At the same time, the proposed inverse design method reduces design time from $1.99 \times 10^6$ ms to 4.18 ms. On 5,000 test samples generated from previously unseen threading patterns, the method achieves a 93% shape reconstruction success rate under surrogate-based evaluation. Physical demonstrations with four bioinspired robots further illustrate the translation of biological curves into realizable robotic shapes.

0.34

Physically Interpretable Basin Selection in Discrete-Variable Origami Design

cs.LG cond-mat.mtrl-scicond-mat.soft ·2026-11-12 ·Lucy Liu, Leon M. Kamp, Katia Bertoldi, L. Mahadevan
similarity 0.55
Abstract

Automatic differentiation has enabled rapid progress on continuous-variable mechanical design problems, but gradient-based optimization still struggles with discrete variables. The standard approach is to optimize using a continuous relaxation of the choices, then commit to the nearest discrete design at the end. Why this procedure selects unfavorable basins is poorly understood. Here, we introduce a practical, interpretable design problem inspired by origami, in which automatic differentiation is used to design shapes with a target functional behavior. Each origami sheet has a fixed geometry, and a bilevel optimization framework tunes which one of four discrete hinge types to place at each fold. Baseline gradient-based design settles into basins with a large discretization gap: relaxed optimization solves 97% of runs, but the final, discrete solutions succeed only half the time. We find that the gap can be relieved with a surprisingly simple modification. An initialization prior uniformly biased toward the stiff, flat hinge option boosts the final solve fraction from 49% to 69%. Applying the prior adds no additional compute and leaves the optimization process unchanged. Compared to the baseline, sheets produced with the prior have greater geometric compatibility and mechanical stiffness. Directly penalizing frustration and floppiness in the outer loss function produces an even greater improvement than the prior does, raising the solve fraction to 78% and indicating that these properties help distinguish the unfavorable basins. Our results demonstrate that loss landscapes for mechanical design can have physically meaningful basins that are not robust to discretization and cause solves to fail. Targeting these basins' physical signatures, even with just an initialization bias, helps avoid them.

0.30

Flap like a bat: Soft pneumatic wings for biomimetic ornithopters

cs.RO ·2026-10-31 ·Besetty Satyanarayana, Sirivelu Akhilesh, Bammidi Abhilash, Prabhat Kumar
similarity 0.51
Abstract · iNaCoMM2025 conference paper

This paper describes the development of a bio-inspired ornithopter wing mechanism that uses soft pneumatic actuators, such as PneuNet structures, in place of revolute joints, inspired by the complicated kinematics of bat flight. The proposed design employs pneumatically driven air pockets within a flexible wing skeleton to achieve smooth, lifelike flapping motion. The actuation system is controlled by 3/2-way solenoid valves and an air pump, which manipulate airflow and actuator deformation. We demonstrate, using ANSYS FEA software, the bending behavior of the PneuNet actuators under varying pressures to inform the wing's structural design. The implementation of soft robotics in the flapping-wing system offers potential advantages over traditional mechanisms, such as reduced mechanical complexity, lower acoustic signatures, enhanced adaptability, and wing morphing. This work demonstrates the feasibility of replacing rigid revolute joints with compliant pneumatic actuators, enabling more agile, silent, and biomimetic aerial robots.

0.32

Optimized size, shape and orientation of rhombic transposition flaps and excisions by gradient-based methods

cs.CE physics.med-ph ·2026-11-03 ·Niels Aage, Brandon Marshal Parks
unusual similarity 0.50
Abstract · 21 pages, 9 figures, 4 tables. Submitted to the Journal of the Mechanical Behavior of Biomedical Materials

This work presents a new method for gradient-based optimization of the rhombic transposition flap and the excision it closes, which set the strain of the skin after closure. Previous studies swept at most three parameters. Here, using structural optimization methods, up to eight variables, two flap angles, two cut lengths and the size, shape and position of the rhombic excision, are optimized under up to 32 geometric and stress constraints. The skin is a pre-stretched, incompressible hyperelastic membrane that wrinkles instead of carrying compression. Smoothed level-sets on a fixed grid represent the cuts, and springs between interpolated points the sutures, so designs change without remeshing and the adjoint method gives the sensitivities. The energy the surgery adds to the skin is minimized, and the model reproduces the energies of a published 48-design sweep with a median deviation of 5%. The optimal flap angles, $(-23^\circ, 31^\circ)$, lie outside the swept range and add 63% less energy than the Limberg flap and 15% less than the best swept design. Under unequal in-vivo tension, the optimal flap turns with the direction of the tension. Fitting the excision to the lesion and its margin lowers the energy by a further 35%, and with all eight variables it is 78% below the Limberg flap. This optimum is the same for finer grids, narrower cuts and wider undermining, although wider undermining reduces its gain. Lowering its suture-line stress by 41% costs only 2.3% more energy.

0.32

Learnable Persistent Wrinkle Formation in Cloth Simulation

cs.GR ·2026-09-12 ·Deshan Gong, Ningtao Mao, Xiaoyuan Yang, Xinyu Lu, He Wang +1 more
publishedcode/data similarity 0.50
Abstract · A paper accepted in the SIGRRAPH Asia 2026 conference

The mechanical memory of fabrics often leads to persistent wrinkles, which reflect key physical properties and habitual wear patterns. Simulating these wrinkles accurately is essential for visual plausibility in digital garments, yet no dedicated approach exists for inferring the parameters that govern their formation due to the lack of precise datasets and estimation methods. We introduce Fabric-101, an inclusive, accurate, and extendable fabric dataset comprising over 101 common fabrics following textile standards. Unlike existing datasets, it captures three physically distinct deformation components (i.e., self-recoverable (elastic), recoverable (friction-driven), and unrecoverable (plastic)), from cyclic loading-unloading measurements. Building on this data, we propose a differentiable cloth simulator combining an elasto-plastic model with friction, designed to capture recoverable and unrecoverable wrinkle formation. Our simulator is differentiable and uses adjoint method to learn fabric physical parameters from the measured hysteresis curves, learning fabric-specific wrinkle behaviors. Through extensive experiments, we demonstrate that our model reproduces persistent wrinkles that are visually and physically similar to real fabrics across diverse materials and motions. Dataset and code are available in https://github.com/GongDeshan/Fabric_101_for_Wrinkles.

0.48