CS Paper Radar

Modular fabrication and design of thick rigid-foldable origami metamaterials

Sunao Tomita, Hiroki Kobayashi, Shoko Arita, Masato Tanaka, Atsushi Kawamoto, Tsuyoshi Nomura, Tomohiro Tachi

cs.CE ·submitted 2026-08-20 08:07 UTC · v1

Abstract

Origami metamaterials offer significant potential for stiff deployable structures However, fabricating load-bearing cellular structures from thick panels introduces geometric interference at non-manifold junctions. Conventional thick-panel fabrication often disrupt ideal kinematics, thereby compromising smooth motion and scalability. This study proposes a modular fabrication framework that preserves one-degree-of-freedom rigid-folding kinematics in thick and non-manifold origami metamaterials. By decomposing non-manifold junctions into a hierarchy of stacked, modular hinged panels, our approach successfully accommodates synchronized hinge motions using scissor-like linkages. Exploiting this representation, we implement a graph-based topology optimization framework that tailors macroscopic stiffness while preserving folding connectivity. We demonstrate this approach by fabricating optimized prototypes that deploy seamlessly with a one-degree-of-freedom motion. Furthermore, we demonstrate engineering scalability through the large-scale construction of extensive deployable systems assembled from modular panels, which exhibit high load-bearing capacity. These results pave the way for the practical fabrication of structural, large-scale deployable metamaterials.

Comment
20 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

One Print, Many Moves: Monolithic Origami-inspired Folding Actuator for Composable Soft Multi-DoF Systems

cs.RO ·2026-09-01 ·Jaehyung Jang, Zhenish Zhakypov, Jasmin Elena Palmer, Melissa Klein, Jee-Hwan Ryu +1 more
similarity 0.67
Abstract · 26 pages, 7 figures

Conventional soft robot actuators excel in compliance, but their uncontrolled deformations compromise accuracy and hinder scaling to multi-degree-of-freedom (DoF) systems. We introduce a MONOlithic ORIGAMI-inspired soft folding actuator design (MONORIGAMI) that establishes a design strategy based on spatially programmed stiffness anisotropy to preserve material compliance along desired folding directions while selectively restricting deformation in unwanted directions. The actuator leverages stiffness tiers based on material thickness, patterned in an origami-inspired geometry with facets and creases, converting unconstrained soft deformation into accurate, repeatable, and composable folding motions without additional reinforcements. The design is fully 3D-printable through a single-material, single-print process that requires no assembly. Each actuator serves as a scalable motion primitive, and linking and orienting multiple actuators mechanically programs multi-DoF trajectories. Using the same fundamental module, we demonstrate three 3D-printed soft multi-DoF robotic systems spanning distinct application domains: (1) a compact 4-DoF wearable haptic device for high-fidelity cutaneous feedback in virtual reality (VR), (2) a 3-DoF joystick for kinesthetic feedback in teleoperation, and (3) a modular robotic gripper capable of underwater operation with geometry-encoded grasp trajectories. These systems demonstrate the module's capabilities for compact multi-axis integration, controlled physical interaction, and geometry-programmed operation across different environments. Together, these results show that MONORIGAMI provides a general, composable, accessible, reliable, and scalable platform for high-precision soft multi-DoF robotics, addressing long-standing limitations in both soft actuator design and fabrication.

0.14

SNAP3D: Physically Grounded 3D Parts for Assembly from a Single Image

cs.GR cs.CV ·2026-09-11 ·Yu-Rou Tuan, Hao-Tang Tsui, Nicolas Ugrinovic, Kris Kitani, Xiaoxuan Ma
code/data similarity 0.59
Abstract · Project page: https://lucytuan.github.io/SNAP3D/

Part-aware 3D asset generation enables applications such as editing, articulation, simulation, and fabrication, yet existing methods can generate visually complete individual parts without ensuring that they form a valid physical assembly. Consequently, generated neighboring parts may interpenetrate, lack valid connections, or collapse under gravity. We propose a physics-guided framework for improving single-image part-aware 3D generation with physically compatible geometry and stable connections. Our method resolves inter-part penetration, recovers a contact graph between neighboring parts, and introduces parameterized connectors at their contact surfaces. Using feedback from physical simulation, we refine connector placement, orientation, and dimensions to improve assembly stability while preserving the generated geometry. We further introduce a physics-based evaluation protocol that complements conventional geometric metrics by directly testing assembly validity and stability under gravity. Experiments comparing against multiple part-aware 3D generators show substantial improvements in physical realizability and stability while maintaining geometric quality. We additionally validate the resulting parts through 3D printing and real-world assembly.

0.38

Active 3D weaves for load-bearing and damage-resilient locomotion

cs.RO cond-mat.mtrl-scicond-mat.soft ·2026-09-26 ·Guowei Wayne Tu, Evgueni T. Filipov
similarity 0.59
Abstract

The craft of weaving, where different materials are interlaced, has tremendous potential for creating active and functional systems for use in soft robots, prosthetics, wearables, exoskeletons, and more. These textile-like systems are flexible and safe for human-machine interaction; however, this inherent flexibility limits their ability to carry loads, which is essential for many robotic functions. In this work, we introduce a general framework for integrating active materials into three-dimensional (3D) woven shells to create robotic structures that combine high axial stiffness for load bearing, low bending stiffness for efficient actuation, and system-level resilience for damage tolerance. These woven robots can be modularly assembled from 'woven corners', a fundamental unit of 3D woven structures. We use eigenvalue calculations to identify load bearing and actuation mechanisms of the 3D woven structures, and use that information to make five different robots capable of locomotion. We demonstrate that these 3D woven robots can locomote carrying loads 70 times their self-weight, and can maintain repeatable performance even after being subjected to extreme compression. This work is a pathway toward the design, manufacturing, and simulation of future 3D woven robotic systems where load bearing, high stiffness, active functional deformation, locomotion, and system-level resilience are all needed.

0.22

Suspended-Fabric Robotic Manipulation Surfaces: Modelling, Design Space, and Multimodular Extensio

cs.RO ·2026-10-30 ·Pratik Ingle, Jørn Lambertsen, Kasper Støy, Andres Faiña
similarity 0.58
Abstract

Robotic Manipulation Surfaces (RMS) reposition objects by deforming the surface on which they rest. A recent class of RMS suspends a continuous fabric sheet from a sparse grid of vertical linear actuators lowering the actuator density of such surfaces but how to design such surfaces so that objects can be controlled everywhere on it, and how to extend it beyond a single module so that objects can pass between modules and achieve parallel, remain open. This paper presents a separable catenary model of the suspended sheet that is fast to compute and provides both the surface shape for given actuator heights and the actuator heights for a desired local slope. The closed form inverse lets a simple PID controller position objects on the sheet, and the model relates fabric length, module span and actuator stroke to the reachable workspace, yielding a minimum fabric length bound and design charts for these surfaces. The approach is then extended to a multimodular platform in which neighbouring modules share actuators. On a $2 \times 2$ prototype, we demonstrate that centimetre-scale objects are transferred between modules and positioned within 0.03 m over a $1 m^2$ workspace with only nine actuators, enabling multi-object manipulation and opening the way to parallel manipulation.

0.21

Low Clearance Hinge Joint Mechanism Based on 3D Printing on Sheet Fabrication Methodology

cs.RO ·2026-09-14 ·Jaehyung Jang, Euibin Shin, Allison M. Okamura, Jee-Hwan Ryu
similarity 0.57
Abstract · 5 pages, 8 figures

This paper presents a low-clearance hinge joint mechanism based on the 3D printing on sheet fabrication method. This approach simplifies the fabrication of hinge mechanisms and overcomes limitations of conventional origami manufacturing by eliminating the need for adhesives commonly used during assembly, making it suitable for robots at the tens-of-centimeters scale. The advantages and disadvantages of three types of hinge joint mechanisms are compared, and a hinge joint that can be designed with low clearance for various facet thicknesses is selected. Based on the selected hinge joint, the twisting angle and bending force are analyzed, leading to the implementation of a clearance of 0.1 mm. Torsional resistance is experimentally evaluated to measure the torque required for twisting caused by plastic deformation and clearance. The results show that the torque associated with plastic deformation is sufficient to constrain the undesired degrees of freedom of the hinge joint, while the torque required for twisting due to clearance is minimal. Based on the analyzed data, the proposed hinge joint mechanism is applied to a 3-degree-of-freedom delta robot manipulator, demonstrating precise motion with low clearance.

0.25

Flexible-body Modeling, Kinematic Identification, and Assembly Accuracy of Overconstrained Spatial Linkages

cs.RO math.AG ·2026-09-15 ·Daniel Huczala, Michael Pieber, Johannes Gerstmayr, Andreas Mair, Frederik Schulte +4 more
similarity 0.57
Abstract

Overconstrained rational single-loop linkages are efficient, compact, and low-cost custom mechanisms, yet their deployment in industrial settings is limited. In simulations, rigid body formulations fail due to redundant constraints. This study presents a flexible multibody modeling framework based on the floating frame of reference formulation, and delivers an overall accuracy analysis of assembled linkages prototypes. The approach is validated against 3D-printed PLA prototypes of a Bennett four-bar mechanism, including variants with intentional joint-axis misalignment, which theoretically, from the rigid body point of view, cannot be assembled. A supplementary contribution is delivered in the form of a kinematic parameter identification methodology suited for this type of mechanism with ill-conditioned Jacobian. The experimental and simulation results are compared and reveal that these overconstrained mechanisms exhibit a self-assembling tendency -- structural compliance drives the assembly toward the ideal geometric configuration, distributing constraint stress throughout the structure. Additional qualitative demonstrations using cardboard tubes and bamboo sticks as link building blocks confirm that functional mechanisms can be realized from low-cost, unconventional materials with limited manufacturing accuracy. The proposed modeling pipeline is fully algorithmic and enables design optimization in the future.

0.18

Lego-Like Stiffness Configuration of Planar Compliant Modules for Task-Specific Flexible Interfaces

cs.RO ·2026-10-05 ·Siyue Yao, Xiaochi Xie, Shixuan Zhao, Yutong Li, Hao Li +2 more
similarity 0.57
Abstract · 8 pages, 8 figures

Compliant mechanisms provide compact and intrinsic structural compliance for regulating physical interactions between mechanisms and environments. However, different tasks demand distinct stiffness characteristics, often requiring task-specific optimization and redesign due to limited geometric design space and inherent coupling among multiple stiffness components. This paper presents a Lego-like stiffness configuration approach using stackable planar compliant modules. Three complementary module geometries are introduced, with their stiffness characteristics further regulated through beam width, plate thickness, and module orientation. A unified stiffness model is established for quantitative analysis of individual and composed modules. Further, a two-stage optimization method is presented to achieve desired stiffness profiles, combining a genetic algorithm for configuration and sequential quadratic programming for parameter refinement. Experimental verification shows deviations below 6.5% for simulated stiffness. A flexible wrist is further developed as a representative implementation, exhibiting distinct compliant and dynamic responses under different stiffness characteristics. An optimized modular composition realizes prescribed stiffness values and maintains compliant obstacle interaction during high-speed motion at 1 m/s, with a maximum tested angular compliance of approximately $15^\circ$. The proposed framework provides a systematic approach for constructing flexible interfaces with task-specific stiffness characteristics.

0.23

Tensegrity Continuum Robots Enable Task-Adaptive Morphologies for Cooperative Behaviors

cs.RO ·2026-08-27 ·Mahmud Hasan Saikot, Sydney Spiegel, Sudheera Akalanka Kariyawasam, Andrew Stefka, Josh Chrisler +1 more
top venue similarity 0.57
Abstract · 22 pages, 6 figures, Accepted to Nature Machine Intelligence

Robots that can change their morphologies and behaviors for different tasks and environments hold great promise for adaptable, multifunctional systems. Modular reconfigurable robots (MRRs) can achieve such functionalities by docking and rearranging individual units, but most rely on rigid modules that lack structural compliance, resulting in limited capabilities. Continuum robots offer compliance through flexible backbones, yet they cannot self-reconfigure into task-adaptive multi-robot configurations. Here, we introduce an MRR that unifies the advantages of both architectures by combining a tensegrity-based compliant body with claw-based connection mechanisms. Each robot can manipulate and locomote independently, and multiple robots can self-reconfigure into different morphologies (e.g., chains, loops, branches) for cooperative manipulation and locomotion. We demonstrate the robots' capability across diverse tasks and environments, including coordinated object manipulation and transport, multimodal locomotion, and loco-manipulation in real-world scenarios. These results lay a foundation for adaptable and multifunctional robotic collectives, with broad potential applications in manufacturing, space exploration, and search-and-rescue operations.

0.34