CS Paper Radar

Active 3D weaves for load-bearing and damage-resilient locomotion

Guowei Wayne Tu, Evgueni T. Filipov

cs.RO cond-mat.mtrl-scicond-mat.soft ·submitted 2026-09-26 00:09 UTC · v1

Abstract

The craft of weaving, where different materials are interlaced, has tremendous potential for creating active and functional systems for use in soft robots, prosthetics, wearables, exoskeletons, and more. These textile-like systems are flexible and safe for human-machine interaction; however, this inherent flexibility limits their ability to carry loads, which is essential for many robotic functions. In this work, we introduce a general framework for integrating active materials into three-dimensional (3D) woven shells to create robotic structures that combine high axial stiffness for load bearing, low bending stiffness for efficient actuation, and system-level resilience for damage tolerance. These woven robots can be modularly assembled from 'woven corners', a fundamental unit of 3D woven structures. We use eigenvalue calculations to identify load bearing and actuation mechanisms of the 3D woven structures, and use that information to make five different robots capable of locomotion. We demonstrate that these 3D woven robots can locomote carrying loads 70 times their self-weight, and can maintain repeatable performance even after being subjected to extreme compression. This work is a pathway toward the design, manufacturing, and simulation of future 3D woven robotic systems where load bearing, high stiffness, active functional deformation, locomotion, and system-level resilience are all needed.

Closest papers

Nearest neighbours by meaning across the whole index.

One Print, Many Moves: Monolithic Origami-inspired Folding Actuator for Composable Soft Multi-DoF Systems

cs.RO ·2026-09-01 ·Jaehyung Jang, Zhenish Zhakypov, Jasmin Elena Palmer, Melissa Klein, Jee-Hwan Ryu +1 more
similarity 0.61
Abstract · 26 pages, 7 figures

Conventional soft robot actuators excel in compliance, but their uncontrolled deformations compromise accuracy and hinder scaling to multi-degree-of-freedom (DoF) systems. We introduce a MONOlithic ORIGAMI-inspired soft folding actuator design (MONORIGAMI) that establishes a design strategy based on spatially programmed stiffness anisotropy to preserve material compliance along desired folding directions while selectively restricting deformation in unwanted directions. The actuator leverages stiffness tiers based on material thickness, patterned in an origami-inspired geometry with facets and creases, converting unconstrained soft deformation into accurate, repeatable, and composable folding motions without additional reinforcements. The design is fully 3D-printable through a single-material, single-print process that requires no assembly. Each actuator serves as a scalable motion primitive, and linking and orienting multiple actuators mechanically programs multi-DoF trajectories. Using the same fundamental module, we demonstrate three 3D-printed soft multi-DoF robotic systems spanning distinct application domains: (1) a compact 4-DoF wearable haptic device for high-fidelity cutaneous feedback in virtual reality (VR), (2) a 3-DoF joystick for kinesthetic feedback in teleoperation, and (3) a modular robotic gripper capable of underwater operation with geometry-encoded grasp trajectories. These systems demonstrate the module's capabilities for compact multi-axis integration, controlled physical interaction, and geometry-programmed operation across different environments. Together, these results show that MONORIGAMI provides a general, composable, accessible, reliable, and scalable platform for high-precision soft multi-DoF robotics, addressing long-standing limitations in both soft actuator design and fabrication.

0.14

RotateIt! Fast and Reliable Single-Arm Garment Unfolding via Online-Adaptive Dynamic Rotation

cs.RO ·2026-09-17 ·Zeqing Zhang, Zuokun Xie, Ao Fang, Bin Dai, Zhengjie Shu +2 more
similarity 0.60
Abstract

Robotic garment unfolding is essential for downstream tasks, yet quasi-static methods require repeated actions, while existing dynamic approaches predominantly rely on bimanual flinging. We present RotateIt!, a single-arm framework that uses adaptive axial rotation for dynamic garment unfolding. To the best of our knowledge, it is the first unfolding framework to employ dynamic axial rotation as its primary manipulation primitive. From a randomly initialized tabletop configuration, the robot selects a rotation-effective grasp and rotates the lifted garment about an approximately fixed anchor, generating inertial tension that separates overlapping layers within a compact workspace. A grasp ranker selects the anchor, while an online residual policy adapts the rotation extent and speed, thereby determining the release timing. Across seen and unseen simulated garments and eight unseen real garments, RotateIt! improves success within three attempts by 44.0-61.0 percentage points over quasi-static pick-and-place. The simulation-trained policies transfer zero-shot to the real world, achieving 75.6% success, 41% higher first-attempt coverage, and 26% higher final coverage. The resulting states further enable autonomous robotic folding without manual rearrangement.

0.25

Tensegrity Continuum Robots Enable Task-Adaptive Morphologies for Cooperative Behaviors

cs.RO ·2026-08-27 ·Mahmud Hasan Saikot, Sydney Spiegel, Sudheera Akalanka Kariyawasam, Andrew Stefka, Josh Chrisler +1 more
top venue similarity 0.59
Abstract · 22 pages, 6 figures, Accepted to Nature Machine Intelligence

Robots that can change their morphologies and behaviors for different tasks and environments hold great promise for adaptable, multifunctional systems. Modular reconfigurable robots (MRRs) can achieve such functionalities by docking and rearranging individual units, but most rely on rigid modules that lack structural compliance, resulting in limited capabilities. Continuum robots offer compliance through flexible backbones, yet they cannot self-reconfigure into task-adaptive multi-robot configurations. Here, we introduce an MRR that unifies the advantages of both architectures by combining a tensegrity-based compliant body with claw-based connection mechanisms. Each robot can manipulate and locomote independently, and multiple robots can self-reconfigure into different morphologies (e.g., chains, loops, branches) for cooperative manipulation and locomotion. We demonstrate the robots' capability across diverse tasks and environments, including coordinated object manipulation and transport, multimodal locomotion, and loco-manipulation in real-world scenarios. These results lay a foundation for adaptable and multifunctional robotic collectives, with broad potential applications in manufacturing, space exploration, and search-and-rescue operations.

0.33

Modular fabrication and design of thick rigid-foldable origami metamaterials

cs.CE ·2026-08-20 ·Sunao Tomita, Hiroki Kobayashi, Shoko Arita, Masato Tanaka, Atsushi Kawamoto +2 more
similarity 0.59
Abstract · 20 pages, 5 figures

Origami metamaterials offer significant potential for stiff deployable structures However, fabricating load-bearing cellular structures from thick panels introduces geometric interference at non-manifold junctions. Conventional thick-panel fabrication often disrupt ideal kinematics, thereby compromising smooth motion and scalability. This study proposes a modular fabrication framework that preserves one-degree-of-freedom rigid-folding kinematics in thick and non-manifold origami metamaterials. By decomposing non-manifold junctions into a hierarchy of stacked, modular hinged panels, our approach successfully accommodates synchronized hinge motions using scissor-like linkages. Exploiting this representation, we implement a graph-based topology optimization framework that tailors macroscopic stiffness while preserving folding connectivity. We demonstrate this approach by fabricating optimized prototypes that deploy seamlessly with a one-degree-of-freedom motion. Furthermore, we demonstrate engineering scalability through the large-scale construction of extensive deployable systems assembled from modular panels, which exhibit high load-bearing capacity. These results pave the way for the practical fabrication of structural, large-scale deployable metamaterials.

0.28

Suspended-Fabric Robotic Manipulation Surfaces: Modelling, Design Space, and Multimodular Extensio

cs.RO ·2026-10-30 ·Pratik Ingle, Jørn Lambertsen, Kasper Støy, Andres Faiña
similarity 0.59
Abstract

Robotic Manipulation Surfaces (RMS) reposition objects by deforming the surface on which they rest. A recent class of RMS suspends a continuous fabric sheet from a sparse grid of vertical linear actuators lowering the actuator density of such surfaces but how to design such surfaces so that objects can be controlled everywhere on it, and how to extend it beyond a single module so that objects can pass between modules and achieve parallel, remain open. This paper presents a separable catenary model of the suspended sheet that is fast to compute and provides both the surface shape for given actuator heights and the actuator heights for a desired local slope. The closed form inverse lets a simple PID controller position objects on the sheet, and the model relates fabric length, module span and actuator stroke to the reachable workspace, yielding a minimum fabric length bound and design charts for these surfaces. The approach is then extended to a multimodular platform in which neighbouring modules share actuators. On a $2 \times 2$ prototype, we demonstrate that centimetre-scale objects are transferred between modules and positioned within 0.03 m over a $1 m^2$ workspace with only nine actuators, enabling multi-object manipulation and opening the way to parallel manipulation.

0.21

Cosserat Modeling of Trimmed Helicoid Soft Arms with a Separated-Section Constitutive Law

cs.RO ·2026-09-21 ·Zhihang Qin, Linxin Hou, Zeyu Zhong, Yuchen Sun, Wenci Xin +8 more
similarity 0.57
Abstract

Cosserat rod models for soft robots usually construct sectional stiffness by summing material properties over a common cross-section. This assumption becomes inaccurate for trimmed helicoid arms, where load-bearing helix domains are separated and connected only through sparse fused crossings. This paper formulates a separated-section constitutive law that evaluates each helix domain in its local frame and pulls its constitutive response back to the backbone, yielding an effective backbone stiffness. Sparse-fusion mechanics captures the additional compliance caused by relative motion between neighboring domains and determines channel-wise reduction profiles $η_c(s/L)$ for bending, torsion, and extension. The resulting effective sectional stiffness is strongly anisotropic: bending and extension are reduced by about one order of magnitude, whereas torsion remains close to the effective backbone stiffness. The resulting sectional law is embedded in a geometrically exact dynamic Cosserat model with GVS discretization and routed-tendon actuation. Across 103 measured configurations, the three datasets give pooled normalized position errors of $7.7 \ \%$, $6.7 \ \%$, and $7.8 \ \%$, while each full-arm solve requires approximately $0.3 \ \mathrm{s}$ on one CPU core (Intel Xeon, Cascade Lake, $2.8 \mathrm{GHz}$), enabling rapid model-based planning, state and load estimation, and morphology--control co-design for architected soft robots.

0.38

Lego-Like Stiffness Configuration of Planar Compliant Modules for Task-Specific Flexible Interfaces

cs.RO ·2026-10-05 ·Siyue Yao, Xiaochi Xie, Shixuan Zhao, Yutong Li, Hao Li +2 more
similarity 0.57
Abstract · 8 pages, 8 figures

Compliant mechanisms provide compact and intrinsic structural compliance for regulating physical interactions between mechanisms and environments. However, different tasks demand distinct stiffness characteristics, often requiring task-specific optimization and redesign due to limited geometric design space and inherent coupling among multiple stiffness components. This paper presents a Lego-like stiffness configuration approach using stackable planar compliant modules. Three complementary module geometries are introduced, with their stiffness characteristics further regulated through beam width, plate thickness, and module orientation. A unified stiffness model is established for quantitative analysis of individual and composed modules. Further, a two-stage optimization method is presented to achieve desired stiffness profiles, combining a genetic algorithm for configuration and sequential quadratic programming for parameter refinement. Experimental verification shows deviations below 6.5% for simulated stiffness. A flexible wrist is further developed as a representative implementation, exhibiting distinct compliant and dynamic responses under different stiffness characteristics. An optimized modular composition realizes prescribed stiffness values and maintains compliant obstacle interaction during high-speed motion at 1 m/s, with a maximum tested angular compliance of approximately $15^\circ$. The proposed framework provides a systematic approach for constructing flexible interfaces with task-specific stiffness characteristics.

0.23

Towards end-to-end co-design for one-shot printable task-specific soft robots

cs.RO ·2026-11-02 ·James Wood, André Farinha, Will Browne, Josh Pinskier, Krishna Manaswi Digumarti
similarity 0.55
Abstract

Soft robot co-design methods can jointly optimise morphology and control, but the resulting designs are often difficult to manufacture, while manufacturable approaches typically restrict actuator placement or require manual assembly. We present a simulation-based co-design framework that jointly optimises material distribution, pneumatic actuator placement and orientation, and control, while producing designs that can be fabricated monolithically using fused deposition modelling. The framework uses a differentiable 2D plane-stress Material Point Method simulator, incorporating an experimentally validated material model and an empirically derived surrogate model of a 3D-printed inflatable actuator. We demonstrate gradient-based optimisation soft robotic arms for prescribed tip trajectories. Optimised designs are transferred directly from simulation to one-shot monolithic FDM fabrication, with integrated actuators and no post-assembly. Physical experiments demonstrate that the resulting arms reproduce the behaviour predicted in simulation. This framework provides a path from task-level objectives to physically realisable soft robots while retaining substantial freedom over both morphology and actuation.

0.14