CS Paper Radar

A 2D Axisymmetric Multi-Domain DC Arc Model for Simulink Implementation

Vinod Kumar Maddineni, Rahul Reddy Devarapally, Nihar Panchal, NagaBabu Koganti, Addisalem Kokob W., Praveen Damacharla

eess.SY math-ph ·submitted 2026-08-23 03:30 UTC · v1
publishedunusual

Abstract

This study introduces a coupled multi-domain framework to simulate direct current (DC) arcs, integrating thermal, fluid dynamic, and electromagnetic phenomena. We derive a two-dimensional (2D) axisymmetric model by simplifying the magneto-hydrodynamics (MHD) equations and implement it in MATLAB/Simulink. The model captures the spatiotemporal evolution of temperature, fluid velocity, and magnetic fields within a wall-stabilized arc column. Simulations across a 10 A to 1500 A current range show a pronounced radial temperature gradient, with central axis peaks and rapid peripheral decay. The approach's accuracy is validated by aligning the simulated velocity and magnetic fields with established physical paradigms. Additionally, the model accurately reproduces the inverse current-voltage characteristics observed in classical models and empirical studies, while transient analyses confirm rapid millisecond-scale voltage stabilization. This accessible computational model provides a robust foundation for investigating DC arc dynamics and facilitates system-level simulations for advanced circuit breakers, welding technologies, and plasma applications.

Journal ref
2026 IEEE/IAS 62nd Industrial and Commercial Power Systems Technical Conference (I&CPS)

Closest papers

Nearest neighbours by meaning across the whole index.

Instrumentation and Stabilization of Electric Arcs for Plasma Smelting Reduction

eess.SY ·2026-10-08 ·Thomas Voglhuber-Brunnmaier, Lukas Ecker, Benjamin Lehner, Jakob Stanek, Erwin K. Reichel
unusual similarity 0.52
Abstract · 15 pages, 16 figures,

The Hydrogen Plasma Smelting Reduction (HPSR) is a promising technology for low-CO$_2$ steel production. However, unstable arc conditions limit energy efficiency, hydrogen utilization, and electrode wear. In this paper, we discuss the influence of the electrical supply characteristics, which can be a source of additional instability. For active stabilization, a fast current controller using a buck converter with an adaptive state controller is used. For analyzing arc stability, a stereoscopic measurement system for reconstructing the arc is presented. The results show a clear correlation between the arc lengths and the measured arc voltage at constant current. Therefore, arc stability can be determined by the measured voltage. These findings build the basis for dynamic arc control by fast electrical interventions.

0.29

Unifying Power Flow and Electromagnetic Transient Modeling

eess.SY ·2026-09-08 ·Tina Gao, Aayushya Agarwala, Timothy McNamara, Lawrence Pileggi
similarity 0.45
Abstract

Grid tools are separated by timescales: steady-state analysis is performed by power flow (PF), whereas the fastest dynamics are captured by electromagnetic transient (EMT) simulation. Although operating at varying timescales, different tools should produce consistent results when analyzing the same grid conditions. However, the PF steady-state solution does not match the time-to-infinity EMT response. This mismatch exists because simplified device models in PF are inconsistent with the "ground truth" EMT models derived from first principles. As inverter-based resources (IBRs) and data centers strip away inertia and operating reserves, approximations used in PF risk grid security by missing violations. To address this, we introduce a steady-state framework that uses full-physics EMT models for high-fidelity steady-state grid analysis. The challenge lies in systematically formulating algebraic frequency-domain representations of dynamic power devices that are naturally described in state-space form. Our tool, SALT (Steady-state After Last Transients), constructs steady-state representations that exactly capture grid device physics when embedded into transmission networks. The approach exploits the structural properties of power device models and the single-harmonic, balanced nature of the transmission system. Results demonstrate SALT achieves EMT steady-state accuracy while delivering a 1x10^6 times speedup. We demonstrate that SALT can capture security threats in contingency scenarios without exception --- whereas PF-based analyses reported 75% fewer rated line violations, 18% fewer Q-limit violations, and 7% fewer voltage violations.

0.20

Learned Surrogates of Three-Dimensional Magnetohydrodynamic Turbulence

cs.LG astro-ph.IMphysics.flu-dynphysics.plasm-ph ·2026-10-31 ·Semih Kacmaz, E. A. Huerta
similarity 0.43
Abstract · 25 pages, 7 figures, 12 tables

Three-dimensional magnetohydrodynamic (MHD) turbulence, the flow of astrophysical and fusion plasmas, is costly to simulate. We present, to our knowledge, the first learned surrogates of three-dimensional resistive MHD turbulence, and compare three standard backbones in that role: a convolutional UNet, a shifted-window transformer and a Fourier neural operator. They are trained as autoregressive emulators of decaying MHD turbulence at a resolution of $128^3$ and Reynolds numbers of 1000, 3000 and 6000, on 500 simulations per Reynolds number, each with one two-stage procedure, single steps and then short rollouts, and stopped by one rule. Over a window of about one large-eddy turnover time, the UNet and the transformer reach relative velocity errors of 0.018 to 0.053 and keep the current sheets, the enstrophy, the current density and the energy spectra of the simulation; which of the two is the more accurate depends on the Reynolds number, the UNet leading at 3000 and 6000 and the transformer at 1000. Applied with the same backbones and training procedure to two public benchmarks, the models reach the lowest error reported to date on the isotropic turbulence set of FactFormer, 39% below the best published model. On the compressible MHD set of The Well, their rollout errors are a third to a half below those of the best of The Well's baselines. They also match a 1.3 B-parameter pretrained foundation model in its rollout windows, with 20-62 times fewer parameters. The code, the configuration of every model, the evaluation scripts and the data generator with the seed of every simulation will be released upon publication.

0.28

Generalized Frequency-Domain Stability Analysis Formulation for Multi-Terminal HVDC Systems

eess.SY ·2026-11-05 ·Francisco J. Cifuentes Garcia, Thomas Roose, Luis Müller, Jef Beerten
code/data similarity 0.42
Abstract · Under review (10 pages). For the associated packages visit http://github.com/Electa-Git/PowerImpedance.jl and http://github.com/Electa-Git/Z…

The integration of offshore wind farms (OWFs) and the interconnection of different transmission networks are key drivers for multi-terminal DC (MTDC) systems. Bipolar high-voltage direct current (HVDC) employing dedicated metallic return (DMR) are attractive due to their increased availability, which co-exist with monopolar and rigid bipole configurations. While existing works focus on symmetric operation and particular configurations, we present a unified framework for MTDC stability analysis valid for both symmetric and asymmetric conditions. The formulation uses the minimum number of variables without loss of information, and combines the analytical network representation with black-box converter models, thereby enabling sensitivity studies. In addition, a closed-form expression guiding the stability improvement is presented, which requires minimal data exchange between involved parties. The framework is demonstrated on several case studies of increasing complexity, which highlight the importance of considering intra-station converter couplings and possible uncertainty of network parameters.

0.44

Reconstruction of Molten Pool Flow Fields from High-Speed Video Using Physics-Informed Neural Networks

eess.IV physics.flu-dyn ·2026-09-26 ·Yue Cao, Qin Su, Dung Hoang Tien, Van Anh Nguyen
unusual similarity 0.42
Abstract

Molten pool flow significantly influences bead geometry, defect formation, and solidification microstructure in wire-arc directed energy deposition (DED). However, direct flow sensing remains an open challenge due to extreme temperatures, intense arc illumination, and complex flow patterns. Traditional research has relied either on computationally intensive fluid dynamics simulations, which require assumed boundary conditions and lack empirical anchoring, or on vision-based tracer particle tracking, which yields sparse, noisy, and physically unconstrained velocity estimates. This work bridges these two paradigms by reconstructing physics-constrained 2D surface flow fields from high-speed imaging of a GTAW-based wire-arc DED process under distinct flow regimes: quasi-steady convection and periodic droplet impact. The pipeline begins with homography correction to calibrate the oblique camera view, followed by dense optical flow extraction to provide raw velocity observations. For quasi-steady pools, a physics-informed neural network (PINN) reconstructs the surface velocity field by jointly enforcing data fidelity, incompressible Navier-Stokes momentum equations, no-penetration boundary conditions, and an arc-forcing prior through composite loss minimization. For pools subject to periodic droplet impact, a phase-conditioned time-dependent PINN is further developed to resolve the cyclic flow evolution throughout the impact period. This work provides a unified framework that bridges high-speed visual sensing and fluid mechanics, enabling physics-grounded flow diagnostics for wire-arc DED processes.

0.29

RAPTOR: RAndom-projection Physics-informed Transient sOlveR

eess.SY cs.LGcs.MSmath.NA ·2026-08-31 ·Petros Ellinas, Benjamin Vilmann, Spyros Chatzivasileiadis, Johanna Vorwerk
similarity 0.42
Abstract

The complexity of time-domain simulation of modern power systems has increased significantly because converter-based resources introduce control dynamics that must be simulated alongside slower system-level and fast electromagnetic dynamics. The resulting wide range of timescales may force classical time-domain solvers to use small timesteps, complicate the solution of nonlinear equations at each timestep, and reduce solver reliability under strongly nonlinear and multi-timescale transient conditions. This paper introduces RAPTOR, a first-of-its-kind time-domain simulation framework for power system dynamic simulations. At its core, RAPTOR introduces a new integration technique that represents the unknown trajectory of hybrid differential-algebraic equations (DAEs) over a time interval using a physics-informed random-projection neural network (PIRPNN) built from fixed Gaussian radial basis functions (RBFs). A nonlinear solver, e.g., Newton-Raphson, determines how to combine the fixed RBFs so that the resulting trajectory satisfies the governing equations. By combining RBFs with broad and localized shapes, RAPTOR can represent complex multi-timescale behavior over comparatively long time intervals. This enables larger effective simulation advances, fewer overall nonlinear solver iterations, and faster integration over long time horizons. Numerical studies on stiff RMS models, IEEE 9-, 14-, 39-, 57-, and 118-bus RMS simulation benchmarks, and EMT test cases show that RAPTOR accurately finds solutions with substantially fewer sequential simulation advances while offering superior accuracy-runtime performance. With speedups of over 10x in certain cases, these results showcase RAPTOR's potential to outperform long-standing and widely used integration methods, such as the Radau method and the trapezoidal rule.

0.24

Data-driven current control of modular multilevel converter-based HVDC transmission system

eess.SY ·2026-11-05 ·Victor D. Reyes Dreke, Rahul Rane, Aleksandra Lekić
similarity 0.41
Abstract · 8 pages, submitted to IET AC and DC Power Transmission (ACDC)

Model-based design (MBD) is a mature framework for designing the current controllers of modular multilevel converters (MMCs) in high-voltage direct current (HVDC) transmission systems. In MBD, linear state-space models are preferred for their good trade-off between accurate dynamics prediction and simplicity. However, first-principle derivations often neglect relevant MMC dynamics, which can hinder controller performance. Data-driven (DD) methods can deliver less biased models that capture parameter uncertainties, control-loop interactions, and grid dynamics, yet they remain under-exploited for controlling MMC currents. This paper studies DD current control method based on integral Subspace Predictive Control (iSPC), synthesized directly from input--output data measured in a high fidelity real-time digital simulator (RTDS), and proposes an initial guideline outlining the main steps for its systematic application to MMC current control. The proposed iSPC is compared against state-of-the-art DD solution, and the findings are validated through simulation studies in MATLAB/Simulink.

0.32

Short-Circuit Current Calculation in DC Shipboard Microgrid Using Operational Admittances

eess.SY ·2026-10-30 ·Pietro Cepollini, Fabio D'Agostino, Federico Silvestro, Antonio Chiarelli
published similarity 0.41
Abstract · Accepted and presented at ESARS-ITEC 2026. Copyright 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obt…

The increasing adoption of DC shipboard power systems is driven by the need to integrate energy storage systems seamlessly onboard. In this context, accurate calculation of short-circuit current transients is critical for sizing fast-acting protection devices. This paper proposes a methodology to calculate short-circuit current transients based on operational admittance modelling of network elements and power converters. The superposition principle is then applied to calculate current contributions and voltage time profiles. The methodology is validated with a detailed EMT model of a notional LVDC shipboard microgrid section consisting of an active front end, a bidirectional buck-boost converter and two special loads. Results demonstrate that the methodology accurately tracks nodal voltages and the fault current contributions dynamics up to the prospective fault current peak, thus providing a computationally efficient tool for fault analysis and protection coordination in LVDC microgrids.

0.38