CS Paper Radar

RIS-Assisted Radar-Communication Coexistence: Detection Analysis with Channel Uncertainties

Rawan Derbas, Shimaa Naser, Hamad Yahya, Sanjeev Gurugopinath, Paschalis C. Sofotasios, Sami Muhaidat

eess.SP ·submitted 2026-08-24 16:02 UTC · v1

Abstract

Reconfigurable intelligent surfaces (RISs) have emerged as a promising technology for improving communication reliability in radar-communication coexistence (RCC) scenarios, particularly for communication users (CUs) located inside radar exclusion zones, where only the radar is permitted to operate and the two systems remain uncoordinated. In such settings, CUs may suffer from strong radar interference whose phase is random and difficult to track while also facing difficulty in obtaining accurate CSI from the base station. These challenges become even more critical in the presence of RIS phase errors, which limit the applicability of conventional coherent detection methods. Motivated by these practical limitations, this paper develops an RIS-assisted RCC framework for a CU operating in an uncoordinated RCC setting. Within this framework, we derive two practical maximum-likelihood (ML)-based detectors, both of which avoid tracking the radar interference phase: 1) a non-coherent detector that does not require instantaneous CSI and incorporates RIS phase uncertainty, and 2) a mismatched coherent detector that relies on imperfect CSI. For the non-coherent case, we derive an exact likelihood expression and a closed-form detector in the low to moderate SINR regime. For the imperfect CSI case, we derive the corresponding closed-form detector in the low-to-moderate SINR regime, and analyze performance through pairwise error probability (PEP), yielding a tractable approximation based on Gauss-Chebyshev quadrature. Numerical and analytical results show that the proposed non-coherent detector closely matches the optimal ML detector, validating its practical usefulness.

Comment
Submitted for publication in IEEE journals

Closest papers

Nearest neighbours by meaning across the whole index.

One-Bit Coherent Distributed Radar Detection in Clutter via Velocity-Plane Search: Vanishing Loss and EEC-Calibrated Thresholding

eess.SP ·2026-10-19 ·Yu-Hang Xiao, David Ramírez, Xiaochuan Ke, Lei Huang, Hing Cheung So
similarity 0.60
Abstract

Coherent distributed radar architectures enhance the detectability of low-reflectivity targets. However, conventional coherent processing generally entails prohibitively large volumes of inter-station data exchange, thereby motivating the adoption of one-bit quantization strategies. In this work, we investigate a clutter-dominated regime in which the interference is driven by a dense ensemble of weak scatterers. We demonstrate that, under these conditions, one-bit quantization can exhibit a vanishing performance loss with respect to ideal high-resolution sampling in terms of detection capability, in contrast to the classical 2 dB performance penalty associated with one-bit detection in white Gaussian noise environments. For unknown target velocity, we reformulate joint velocity-search processing under the effective one-bit model. Maximizing over the velocity plane makes false-alarm calibration an extreme-value problem for a correlated two-dimensional random field, whose maximum is not characterized by its pointwise null distribution alone. We therefore use an expected Euler characteristic approximation to calibrate the search threshold. We obtain analytic expressions for a separable two-station geometry and use constrained coefficient fitting for larger networks. Monte Carlo simulations demonstrate negligible quantization loss in the clutter-dominated setting and conservative false-alarm calibration under the tested Gaussian slow-time model.

0.22

Cooperative Target Localization in RIS-Enabled ISAC Systems

eess.SP ·2026-09-30 ·Rouhollah Amiri, Abdollah Ajorloo, Mohammad Mahdi Mojahedian, Ahmad Reza Hassanshahi, Fabiola Colone
similarity 0.59
Abstract

This paper develops a cooperative integrated sensing and communication (ISAC) framework in which a multi-antenna base station (BS) simultaneously localizes a target and serves multiple communication users, a subset of which is equipped with reconfigurable intelligent surfaces (RISs). The Fisher information matrix (FIM) for target positioning is derived, explicitly characterizing its dependence on the BS beamforming coefficients, RIS phase profiles, and bistatic sensing geometry. Under the stated scaling assumptions, coherent RIS phase alignment yields a Fisher-information gain that scales quadratically with the number of RIS elements, whereas independent random phases provide a linear gain in expectation. We formulate a sensing-centric joint active and passive beamforming problem that minimizes the position error bound (PEB) subject to per-user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. The resulting non-convex problem is addressed through an iterative successive convex approximation (SCA) procedure that solves a sequence of convex subproblems. We further develop a target localization estimator that fuses one direct time-of-arrival (ToA) measurement, one angle-of-arrival (AoA) measurement, and multiple RIS-assisted indirect ToA measurements. Under small measurement errors and asymptotically efficient first-stage ToA/AoA estimation, the estimator covariance approaches the Cramér--Rao bound (CRB) to first order. Numerical results validate the analytical scaling laws and demonstrate the localization gains enabled by cooperative RIS-equipped users.

0.13

Enabling Emergency Communication via Semantic Radar-Centric ISAC

cs.NI ·2026-09-06 ·Mohaimin Al Barat, Chaoyu Zhang, Hexuan Yu, Kai Zeng, Y. Thomas Hou +1 more
published similarity 0.57
Abstract · 6 pages, 1 figure, 5 tables. Accepted by IEEE MILCOM 2026

Combat aircraft and other modern military platforms field two co-located RF assets: a radar for sensing and a dedicated radio for communication. In contested battlefield environments, however, the dedicated communication path is highly likely to be targeted and disrupted by jamming, blockage, or physical damage, while the radar remains fully operational. A natural fallback is to repurpose the surviving radar aperture as an emergency communication channel. The difficulty is that radar is purposely engineered for sensing rather than communication, so loading any information onto its waveform perturbs the beampattern and inevitably erodes sensing performance: the more bits we push, the more sensing we lose. We identify the core problem as enabling emergency communication via a radar-centric integrated sensing and communication (ISAC) link while preserving the radar's primary sensing function. Therefore, we propose a semantic radar-centric ISAC framework that pairs a learned vector-quantized semantic encoder, which compresses task-relevant content into a few tens to a few hundred bits, with a wideband phased-MIMO radar restricted to a conservative spatial-spectral configuration subset that respects a bounded sensing-degradation budget. Experiments on SAR target classification and text classification show that our framework supports reliable emergency communication for downstream tasks while keeping the radar beampattern almost unchanged.

0.38

Robust Design of Sensing-Assisted Secure Transmission for RIS-Aided ISAC System under Eavesdropper 3D Positioning Uncertainty

eess.SP ·2026-10-16 ·Jie Li, Zhendong Li, Wen Chen, Wei Xu, Ning Wang
benchmarktheory similarity 0.56
Abstract · 12 pages, 7 figures

Localization errors in estimating the position of a potential eavesdropper (Eve) pose a critical challenge to secure transmission in reconfigurable intelligent surface (RIS)-assisted integrated sensing and communication (ISAC) systems. To address this issue, this paper proposes a sensing-assisted robust secure transmission framework that exploits ISAC sensing to characterize the positioning uncertainty induced by these errors. The RIS is partitioned into a reflection region and a sensing reception region, supporting sensing and communication through spatial separation. By jointly exploiting observations collected at the base station (BS) and the RIS sensing reception region, maximum likelihood estimation (MLE) is employed to estimate the arrival angles, from which Eve's three-dimensional (3D) position is obtained through cross localization. The resulting localization Cramer-Rao lower bound (CRLB) is then used to construct an ellipsoidal uncertainty region around the estimated position. A two-stage optimization strategy is developed. In Stage I, the sensing beamformer and RIS reflection coefficients are jointly optimized to improve localization accuracy. In Stage II, the resulting positioning uncertainty is incorporated into a robust secure transmission design, where the communication beamformer and RIS reflection coefficients are jointly optimized to maximize the worst-case secrecy rate. Simulation results demonstrate that the proposed approach outperforms benchmark schemes without RIS assistance and with random RIS configurations in terms of secrecy performance. The proposed framework effectively mitigates secrecy performance degradation caused by localization errors in Eve's position.

0.26

Joint Target-Tag Estimation in Ambient Backscatter-Based ISAC

eess.SP ·2026-10-04 ·Awadhesh Gupta, Kumar Vijay Mishra, Naveen K. D. Venkategowda, Aditya K. Jagannatham
top venuetheory similarity 0.55
Abstract

Integrated sensing and communication (ISAC) has emerged as a key paradigm for unifying radar sensing and wireless communications within a shared hardware and spectral framework. In parallel, ambient backscatter communication (AmBC) has gained attention as a low-power solution for enabling passive connectivity by modulating and reflecting existing radio-frequency signals. Motivated by these developments, this paper investigates an integrated sensing and ambient backscatter communication (ISABC) framework in which a dual-functional radar-communication (DFRC) transceiver jointly performs high-resolution target sensing and low-power tag detection in cluttered environments. Within this ISAC and AmBC setting, we develop a comprehensive system model that jointly captures the estimation of target and clutter parameters, including delay, Doppler shift, and complex reflectivity, together with the recovery of embedded AmBC tag symbols. The resulting DFRC signal model reveals strong coupling among direct-path reflections, clutter echoes, and passive backscatter signals, leading to a highly entangled estimation problem. To address this challenge, we propose a robust three-stage signal processing framework that sequentially estimates target and clutter parameters before detecting the AmBC tag message. This structured approach effectively disentangles the superimposed components, improving both sensing accuracy and communication reliability in ISAC systems. Extensive simulations, benchmarked against the Cramer-Rao lower bound (CRLB), demonstrate the superior estimation performance of the proposed DFRC-based solution. The results further highlight the fundamental trade-offs between sensing accuracy and backscatter communication efficiency in ISABC systems.

0.42

Subspace-based Second-Order Detection Architectures for Radar Signals in the Presence of Unstructured Interference

eess.SP ·2026-10-05 ·Nicola Acito, Danilo Orlando, Giuseppe Ricci
similarity 0.55
Abstract

This paper proposes a subspace-based decision scheme to detect range-spread targets in presence of thermal noise, clutter, and intentional interference. The target and intentional interference (i.e., noise-like jammer) effects are confined to the covariance matrix of the received primary data vectors. The jammer is also present in the secondary data vectors necessary to estimate the clutter covariance matrix. Finally, an additional set of training data, acquired by the system in passive mode and, hence, not contaminated by target and clutter echoes, is used to avoid the jammer parameters are unidentifiable. The detection problem is addressed by deriving an architecture based upon the likelihood ratio test where the unknown second-order parameters are suitably estimated. To this end, a unified theoretical framework is defined also providing a geometrical interpretation of the estimation procedures. The performance assessment, conducted also in comparison to a natural competitor, highlights the effectiveness of the proposed solution.

0.27

Sparse Range-Doppler Profile Recovery in Colored Interference for Adaptive Radar

eess.SP ·2026-11-09 ·Tao Wang, Augusto Aubry, Antonio De Maio, Junli Liang
similarity 0.55
Abstract

Range-Doppler profile (RDP) recovery is a fundamental task in adaptive radar signal processing, whose performance can be severely degraded by Doppler grid mismatch and colored interference. This article develops a unified sparsity-aware framework for on-grid and off-grid RDP recovery in the presence of correlated clutter with unknown spectral properties. The problem is formulated within a regularized maximum likelihood framework by exploiting both primary and secondary data, where the sparse RDP and interference covariance are jointly inferred, while Doppler frequency displacements are additionally estimated in the off-grid case to mitigate basis mismatch. Both covariance-adaptive one-step formulations and their sample-covariance-matrix-based two-step alternatives are developed within the mentioned framework. The resulting challenging nonconvex optimization problems are efficiently tackled by a majorization-minimization (MM) algorithm for the on-grid case and an MM-minimum block improvement (MBI) approach for the off-grid counterpart. Furthermore, Bayesian information criterion (BIC)-based refinement strategies are introduced to improve RDP recovery and Doppler frequency displacement estimation. Numerical results under colored interference demonstrate the superior recovery performance of the proposed methods over representative benchmarks.

0.23

Robust Transceiver Design for SIM-Assisted Integrated Sensing and Covert Communications

eess.SP ·2026-09-27 ·Ahmed M. Benaya, Ali A. Nasir, Khaled M. Rabie, A. Abdelaziz Salem, Daniel B. da Costa
similarity 0.55
Abstract

Stacked intelligent metasurfaces (SIMs) have emerged as a promising wave-domain processing technology for sixth-generation integrated sensing and communication networks, reducing reliance on complex radio-frequency hardware. Nevertheless, imperfect channel state information (CSI) can compromise sensing performance and communication reliability. Moreover, ensuring covert transmission introduces a further challenge, as the system must sense potential targets while concealing communication activity from unauthorized wardens. These challenges motivate the development of robust SIM-assisted integrated sensing and covert communication (ISACC) systems. In this paper, we investigate the robust transceiver design of a multi-user, multi-target ISACC system under imperfect CSI. We jointly optimize the transmit and receive beamformers, sensing covariance matrix, and SIM phase shifts to maximize the worst-case minimum sensing signal-to-interference-plus-noise ratio. The formulation enforces constraints on bounded channel uncertainties, user quality-of-service requirements, transmit-power budget, SIM phase shifts, and target detection probabilities. Since the formulated problem is highly non-convex, we develop an alternating optimization framework based on the S-procedure, successive convex approximation, and semidefinite relaxation. Furthermore, to reduce computational complexity, we derive exact lower-dimensional representations of the robust sensing linear matrix inequalities (LMIs) involved in transmit/receive-beamformer designs. We further develop a low-complexity phase-update method that avoids the large sensing LMIs. Numerical results demonstrate that the proposed design outperforms random phase shift and fully digital-beamforming benchmarks, while the low-complexity scheme achieves comparable performance to the LMI-based scheme at substantially lower computational cost.

0.15