CS Paper Radar

Enabling Emergency Communication via Semantic Radar-Centric ISAC

Mohaimin Al Barat, Chaoyu Zhang, Hexuan Yu, Kai Zeng, Y. Thomas Hou, Wenjing Lou

cs.NI ·submitted 2026-09-06 19:39 UTC · v1
published

Abstract

Combat aircraft and other modern military platforms field two co-located RF assets: a radar for sensing and a dedicated radio for communication. In contested battlefield environments, however, the dedicated communication path is highly likely to be targeted and disrupted by jamming, blockage, or physical damage, while the radar remains fully operational. A natural fallback is to repurpose the surviving radar aperture as an emergency communication channel. The difficulty is that radar is purposely engineered for sensing rather than communication, so loading any information onto its waveform perturbs the beampattern and inevitably erodes sensing performance: the more bits we push, the more sensing we lose. We identify the core problem as enabling emergency communication via a radar-centric integrated sensing and communication (ISAC) link while preserving the radar's primary sensing function. Therefore, we propose a semantic radar-centric ISAC framework that pairs a learned vector-quantized semantic encoder, which compresses task-relevant content into a few tens to a few hundred bits, with a wideband phased-MIMO radar restricted to a conservative spatial-spectral configuration subset that respects a bounded sensing-degradation budget. Experiments on SAR target classification and text classification show that our framework supports reliable emergency communication for downstream tasks while keeping the radar beampattern almost unchanged.

Comment
6 pages, 1 figure, 5 tables. Accepted by IEEE MILCOM 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Task-Based Evaluation of Raw Radar Data Compression: A Pre-Registered Study of Where Classical Codecs Fail to Preserve Target Detection, and Why

eess.SP ·2026-08-18 ·Eric Michael Chrabot
code/data similarity 0.62
Abstract · 16 pages, 9 figures, 5 tables. v2: corrects the retention-only counterfactual (Secs. I, III-A, V-C); states the criterion's commit chronolog…

Synthetic aperture radar (SAR) systems collect raw I/Q echo data at rates that exceed downlink capacity; fielded systems compress onboard with block-adaptive quantization (BAQ/FDBAQ). Proposed replacements, including learned compression, are evaluated with image-quality metrics (PSNR, SSIM, SQNR); none measures whether the data still supports its operational use. We introduce a task-based evaluation methodology for raw radar compression, with a published pre-registration trail: codecs are scored after SAR focusing against a two-sided criterion -- a CFAR detection-retention floor and a spurious-detection budget at matched threshold -- using frozen task models trained once on uncompressed data. On Sentinel-1 stripmap Level-0 data the evaluation brackets the fielded FDBAQ operating point at the resolution of the BAQ grid (3-bit BAQ sustains utility at 6.12 bits per complex sample; 2-bit does not), with a reported lattice artifact found to change retention by at most 0.004. Under the final plane-mapping rule no classical configuration sustains utility below 4.86 bits per complex sample on this scene. Energy concentration after focusing delivers the predicted retention gain (0.888 vs 0.691 at 2 bits) but converts it into target-adjacent false alarms for wavelet and block-transform codecs alike: a retention-only rule certifies focused-domain JPEG2000 at 4 bits while it produces 2.5 times the tolerable spurious count. On AFRL Gotcha GMTI data (airborne, never compressed onboard) the frontier is bracketed at 7.4-8.0 bits per complex sample and the same trade reappears; on an Umbra spotlight image JPEG2000 passes the retention floor at 2, 1, and 0.5 bits while producing 10-14 times the spurious budget. We report the full pre-registration trail, including the chronology of the criterion's two clauses, one retracted overclaim, and a bounded negative result for a small learned codec.

0.28

A Novel Pulse Radar Framework for ISAC-FD-enabled URLLC Systems

eess.SP ·2026-09-13 ·Atefeh Rezaei, Ata Khalili, Falko Dressler, and Robert Schober
similarity 0.60
Abstract

We propose a novel pulse radar framework for integrated sensing and communication (ISAC) systems supporting full-duplex (FD) ultra-reliable low-latency communication (URLLC). Motivated by the stringent delay and reliability requirements of sixth-generation (6G) URLLC services, our framework integrates pulse-based radar sensing with sporadic packet transmissions for URLLC users while accounting for residual self-interference (SI) inherent in FD systems. We adopt a time-structured approach in which the silent intervals of the radar pulse are opportunistically exploited for communication. A key focus is minimizing the total energy consumption of the base station, which is critical for sustainable radar-assisted wireless networks. To this end, we jointly optimize the sensing pulse width, beamforming vectors, and URLLC scheduling while ensuring communication and sensing quality-of-service (QoS) constraints. We formulate a non-convex mixed-integer optimization problem addressing sensing and communication requirements jointly. Sensing performance, quantified via the Cramer-Rao bound (CRB), is reformulated using the Schur complement. Finite blocklength capacity approximations capture the URLLC constraint, while probabilistic constraints are modeled using cumulative distribution functions. The original non-convex problem is decomposed into two sub-problems via an alternating optimization algorithm. Simulation results reveal important trade-offs between sensing time, energy consumption, and residual SI. Our proposed method improves system performance while explicitly accounting for SI, and demonstrates improved URLLC reliability with reduced energy consumption. The results show that proper design of the sensing duration and FD scheduling yields a flexible ISAC framework capable of robust operation even under strong interference.

0.13

Joint Target-Tag Estimation in Ambient Backscatter-Based ISAC

eess.SP ·2026-10-04 ·Awadhesh Gupta, Kumar Vijay Mishra, Naveen K. D. Venkategowda, Aditya K. Jagannatham
top venuetheory similarity 0.60
Abstract

Integrated sensing and communication (ISAC) has emerged as a key paradigm for unifying radar sensing and wireless communications within a shared hardware and spectral framework. In parallel, ambient backscatter communication (AmBC) has gained attention as a low-power solution for enabling passive connectivity by modulating and reflecting existing radio-frequency signals. Motivated by these developments, this paper investigates an integrated sensing and ambient backscatter communication (ISABC) framework in which a dual-functional radar-communication (DFRC) transceiver jointly performs high-resolution target sensing and low-power tag detection in cluttered environments. Within this ISAC and AmBC setting, we develop a comprehensive system model that jointly captures the estimation of target and clutter parameters, including delay, Doppler shift, and complex reflectivity, together with the recovery of embedded AmBC tag symbols. The resulting DFRC signal model reveals strong coupling among direct-path reflections, clutter echoes, and passive backscatter signals, leading to a highly entangled estimation problem. To address this challenge, we propose a robust three-stage signal processing framework that sequentially estimates target and clutter parameters before detecting the AmBC tag message. This structured approach effectively disentangles the superimposed components, improving both sensing accuracy and communication reliability in ISAC systems. Extensive simulations, benchmarked against the Cramer-Rao lower bound (CRLB), demonstrate the superior estimation performance of the proposed DFRC-based solution. The results further highlight the fundamental trade-offs between sensing accuracy and backscatter communication efficiency in ISABC systems.

0.42

Adaptive Pilot Selection for Unified Semantic Communication and Semantic Sensing in ISAC

eess.SP cs.AI ·2026-09-25 ·Muhammad Abubakar Rashid, Muhammad Hannan Akram, Haejoon Jung, Syed Ali Hassan
similarity 0.60
Abstract

Semantic communication (SemCom) and integrated sensing and communication (ISAC) are promising technologies for future 6G wireless networks. Existing studies have applied semantic technology to either the communication module or the sensing module of ISAC. In this work, we propose SemISAC, which performs both SemCom and semantic sensing within a single dual-function waveform. SemISAC uses a joint semantic encoder that extracts task-specific information for both communication and sensing. We evaluate SemISAC in a vehicular scenario in which vehicles share pixel-wise segmentation of the road environment and, through sensing, classify surrounding objects and estimate their ranges. On the transmitter side, a deep learning encoder converts the input road-scene image into semantic symbols and places them on the data cells of an OFDM grid, while the remaining cells serve as pilots for channel state information estimation and sensing. The pilot configuration is adaptively optimized based on the channel conditions to balance communication and sensing requirements. At the receiver, a deep learning model reconstructs the segmentation from the received waveform, while the transmitting vehicle captures the reflected waveforms from surrounding objects and uses task-specific deep learning decoders for target recognition and range estimation. Simulation results show that SemISAC achieves a segmentation accuracy close to that of the dedicated SemCom module while outperforming both conventional and semantic baselines in target recognition and range estimation.

0.13

Radio Echo Representation Learning for Semantic Sensing in Multi-Modal ISAC Systems

eess.SP ·2026-10-11 ·Guanping Shang, Anzheng Tang, Kwok Kit Chan, Shenghui Song
similarity 0.60
Abstract · This paper has been submitted to the IEEE trans journals

Semantic sensing extends integrated sensing and communication (ISAC) beyond physical parameter estimation by exploiting task-oriented representations from radio echoes. Nevertheless, existing multimodal sensing remains largely limited to vision-assisted radio physical parameter estimation or typically processes the visual and radio modalities separately, leaving radio representations underutilized for visual task enhancement. Feature-level fusion enables closer cross-modal interaction, while echo interference complicates the learning of user-specific radio representations and its semantic consistency with the visual entities. To address these challenges, this paper proposes a multimodal semantic sensing framework for orthogonal frequency-division multiplexing (OFDM)-ISAC systems. We propose a radio encoder to learn radio representations oriented toward visual localization from superimposed pilot echoes, together with Variational Radio-Visual Grounding (VRVG) to promote semantic consistency between the learned radio representations and visual spatial features. The radio representations are then formulated as semantic probes to highlight the corresponding entities in the visual scene through cross-modal fusion. Experiments using real-world RCooper dataset show that the resulting synergistic radio-visual embeddings enable accurate radio-visual user matching and significantly improve both user-specific visual localization and physical parameter estimation performance. The results substantiate the benefits of radio representation learning and semantically consistent fusion for multimodal semantic sensing.

0.30

Semantic Communications: Principles, Architectures and Applications

cs.NI ·2026-10-20 ·Sasa Maric
similarity 0.60
Abstract · 9 pages 3 figures

Conventional communication systems are designed to transmit data reliably, focusing on metrics such as bit error rate, throughput, and channel capacity. However, these traditional measures do not evaluate whether the received information is actually useful for a specific downstream task. To address this limitation, semantic communication has emerged as a promising paradigm that prioritizes the meaning, context, and task relevance of transmitted information rather than raw bit level reconstruction. This paper presents a comprehensive review of the theoretical foundations, system architectures, learning techniques, and evaluation practices in semantic communications. We classify existing state-of-the-art algorithms ranging from deep joint source-channel coding (Deep JSCC) and task-oriented feature transmission to generative diffusion models and contrast their operational trade offs against conventional baselines. Furthermore, we examine key application domains, including remote sensing, autonomous vehicles, and healthcare IoT, while addressing open challenges in security, privacy, robustness, and standardized evaluation.

0.29

One-Bit Coherent Distributed Radar Detection in Clutter via Velocity-Plane Search: Vanishing Loss and EEC-Calibrated Thresholding

eess.SP ·2026-10-19 ·Yu-Hang Xiao, David Ramírez, Xiaochuan Ke, Lei Huang, Hing Cheung So
similarity 0.59
Abstract

Coherent distributed radar architectures enhance the detectability of low-reflectivity targets. However, conventional coherent processing generally entails prohibitively large volumes of inter-station data exchange, thereby motivating the adoption of one-bit quantization strategies. In this work, we investigate a clutter-dominated regime in which the interference is driven by a dense ensemble of weak scatterers. We demonstrate that, under these conditions, one-bit quantization can exhibit a vanishing performance loss with respect to ideal high-resolution sampling in terms of detection capability, in contrast to the classical 2 dB performance penalty associated with one-bit detection in white Gaussian noise environments. For unknown target velocity, we reformulate joint velocity-search processing under the effective one-bit model. Maximizing over the velocity plane makes false-alarm calibration an extreme-value problem for a correlated two-dimensional random field, whose maximum is not characterized by its pointwise null distribution alone. We therefore use an expected Euler characteristic approximation to calibrate the search threshold. We obtain analytic expressions for a separable two-station geometry and use constrained coefficient fitting for larger networks. Monte Carlo simulations demonstrate negligible quantization loss in the clutter-dominated setting and conservative false-alarm calibration under the tested Gaussian slow-time model.

0.22

SemISAC: Semantic Integrated Sensing and Communications

eess.SP ·2026-09-16 ·Xiaoqi Zhang, J. Andrew Zhang, Zhongqin Wang, Chang Liu, Weijie Yuan +2 more
similarity 0.59
Abstract

Conventional integrated sensing and communications (ISAC) systems primarily integrate communications and sensing through shared physical resources, without explicitly exploiting task-relevant semantic information. To move beyond such physical-level integration, we propose semantic ISAC (SemISAC), a general framework that unifies semantic communication (SemCom) and semantic sensing (SemS) to convey source meaning and acquire environmental meaning. Specifically, the transmitter combines source semantics and sensing task information with available side information to design the shared waveform and allocate radio resources, while the receiver-side communication and sensing task decoders recover the source meaning and infer the required environmental information, respectively. We also provide an information-theoretic interpretation to characterize the relationship between physical and task-relevant information and the resulting semantic trade-off in SemISAC. Building on this framework, we formulate the general SemISAC design problem and propose two realization methods, namely end-to-end (E2E) SemISAC optimization and modular SemISAC optimization. As a concrete realization, we apply modular SemISAC optimization to jointly design a learnable time-frequency (TF) precoder in an orthogonal frequency-division multiplexing (OFDM) system for representative SemCom and SemS tasks. Simulation results demonstrate that the proposed realization reduces sensing semantic distortion under a given communication requirement and achieves a more favorable communication-sensing trade-off than baseline designs.

0.41