CS Paper Radar

Time-Window Noise2Noise: Self-Supervised Blind Denoising of Mechanical Vibration and Impact Signals

Vinicius S. Vianna, Tiago H. Machado, Ilmar F. Santos

eess.SP ·submitted 2026-08-25 11:57 UTC · v2

Abstract

Vibration and impact measurements in mechanical systems are invariably corrupted by noise, which degrades every quantity derived from them, such as modal parameters and contact forces. Classical filters rely on assumptions about the noise or the signal, and linear filters cannot remove the noise that shares the frequency band of the structural response. This work presents Time-Window Noise2Noise (TWN2N), a self-supervised method for blind denoising of signals produced by deterministic mechanical systems. The method requires neither a clean reference signal nor paired noisy observations, nor a measured noise variance or distribution: by reconstructing each time instant from its temporal neighborhood while masking the instant itself, a compact autoencoder is encouraged to exploit the coherent temporal and multichannel structure of the measurement rather than the noise. The formulation requires no model of the system and is assessed on two benchmarks with exactly known ground truth: the impulse response of a linear 3-degree-of-freedom system and a nonlinear Hunt-Crossley impact. Over repeated realizations, TWN2N exceeds a zero-phase low-pass filter with oracle cutoff at low and moderate input signal-to-noise ratio (SNR) and gives the largest gain inside the structural band, which a linear filter largely preserves, among the Savitzky-Golay and wavelet references; the advantage vanishes at high input SNR and under brown noise. The benefit propagates to identification: the damping ratio of the weakest mode, overestimated several-fold on the raw signals, is recovered close to its reference value after denoising.

Comment
24 pages, 8 figures, 14 tables. Submitted to the Journal of the Brazilian Society of Mechanical Sciences and Engineering (Springer)

Closest papers

Nearest neighbours by meaning across the whole index.

On the Removal of Artifacts of Known-Shape from Noisy Signals

eess.SP ·2026-09-07 ·Alessandro Schaer, Henrik Maurenbrecher, George Chatzipirpiridis, Hamdi Torun
similarity 0.55
Abstract · Submitted to Healthcare Technology Letters

A general method for the estimation and removal of quasi-periodic, artifact-like disturbances from single channel measurements is presented. The method is based on a wavelet template and data-driven template extraction from single channel, noisy signals. The method is tested on an example application in modern neurology. The method is compared to an autoencoder, trained and deployed under idealized conditions, thus acting as reference system. It is found that the proposed method yields signal estimates with median root mean squared error improvement of 33% compared to the baseline, which is 4% more than the autoencoder, while relying on fewer assumptions and parameters, and without the need for any training data.

0.25

Blind Video Denoising for Vocal Tract rtMRI using a Self-Supervised Ensemble

eess.IV cs.CV ·2026-10-29 ·Julian Andres Hernandez-Potes, Tomás Arias-Vergara, Daiqi Liu, Andreas Maier, Paula Andrea Perez-Toro
similarity 0.52
Abstract · 7 pages, 5 figures

Real-time magnetic resonance imaging of the vocal tract makes speech articulation directly observable, but the trade-off between temporal resolution and signal quality introduces substantial noise and obscures fine articulatory detail. Since clean references cannot be acquired for a moving vocal tract, supervised denoising approaches are not applicable in this setting. We propose a self-supervised denoising framework that combines spatiotemporal super-resolution learning with pseudo-supervision derived from a variance-stabilized non-local means filter. A dual-model fusion strategy balances noise suppression and preservation of high-frequency articulatory structure. Experiments on the USC-75 multi-speaker dataset under natural noise conditions show that the ensemble raises the signal-to-noise ratio by 11.9 dB on unseen subjects while attaining more high-frequency articulatory content in the frames. Among tuned implementations of anisotropic diffusion, block-matching filtering, non-local means and pre-smoothed non-local means, every configuration that achieves comparable noise suppression does so at the cost of high-frequency content or of structural fidelity. Under severe added Gaussian, Rayleigh and Rician noise, peak signal-to-noise ratio improves by 7.6 to 11.8 dB and structural similarity roughly triples. An ablation shows that the variance-stabilized pseudo-supervision is an essential element for denoising, and that the effect is attributable to the hard thresholding contained in the stabilization transform.

0.25

Robust Fault Detection in Mechanical Multimodal Time Series via Self-Supervised Cross-Modal Reconstruction

cs.LG stat.AP ·2026-09-14 ·Magnus Munk Jensen, Dorte Hammershøi, Rafał Wiśniewski, Olga Fink
similarity 0.51
Abstract · Submitted to Reliability Engineering & System Safety

Fault detection is essential in industrial systems, enabling early identification of abnormal behaviour and improving safety, reliability, and operational efficiency. Modern systems increasingly rely on heterogeneous sensing modalities that capture complementary aspects of the underlying physical process. However, existing data-driven anomaly detection methods often process each modality independently or use simple feature-level fusion, limiting their ability to exploit cross-modal relationships that characterize normal system behaviour. Their performance also commonly assumes similar training and deployment distributions, whereas real-world operation is affected by changing operating conditions, environmental influences, and system degradation that induce distribution shifts and reduce detection performance, especially in unseen regimes. In this work, we propose a multimodal anomaly detection framework based on cross-modal reconstruction of heterogeneous time-series sensor data. Rather than modeling each modality independently, the framework learns system dynamics by reconstructing each modality from the others, thereby exploiting complementary information across modalities. This integrates information across sensing channels without requiring explicit temporal alignment or identical sampling rates, while improving robustness to sensor noise, missing measurements, and modality-specific disturbances. To address distribution shifts during real-world deployment, anomalies are identified using cross-modal reconstruction error and an adaptive test-time thresholding mechanism that adjusts to changing operating conditions. Experiments on three industrial case studies show strong fault detection performance and substantially improved robustness under out-of-distribution conditions, with the largest gains observed in the most challenging operating regimes.

0.23

When Labels Are Scarce: An Oscillatory State Space Model for Vibration Diagnosis

cs.LG eess.SP ·2026-09-23 ·Mainak Mallick, Seung-Kyum Choi
benchmark similarity 0.50
Abstract

Machine fault diagnosis from vibration requires learning from scarce labelled fault recordings while meeting the computational constraints of edge devices for local inference. We introduce DualRes, a compact oscillatory state-space model that combines two complementary spectral views of vibration, capturing rapid changes and fine frequency structure. Time-aligned views are processed by selective oscillatory memory, which learns how long to retain temporal patterns. The encoder contains 39,528 parameters. We evaluate supervised learning across six bearing datasets and a gearbox benchmark, with an additional gearbox pilot. Recording-level splits and explicit accounting of labelled duration distinguish data efficiency from repeated exposure to correlated samples. On the main gearbox benchmark, DualRes achieves state-of-the-art performance among the nine evaluated methods at six of seven label budgets. With about six labelled seconds per class, it improves macro-F1 by 16.1 percentage points over the next strongest comparator. On the same benchmark, DualRes achieves a 1.44-fold recording-level speedup and a 24.8-fold reduction in checkpoint storage relative to a selective state-space baseline under matched hardware and runtime conditions. Bearing results reveal task-dependent trade-offs. These findings support oscillatory memory as a compact approach to vibration diagnosis under limited labelled exposure.

0.30

Koopman-Predictive Coefficient Tracking for Vehicle-Mounted Monostatic ISAC

eess.SP ·2026-09-29 ·Anh Tuyen Le, Xiaojing Huang, Y. Jay Guo
unusual similarity 0.49
Abstract

This paper studies predictive coefficient tracking for digitally generated self-interference cancellation (SIC) in vehicle-mounted monostatic integrated sensing and communication (ISAC) systems. In such systems, the canceller must suppress strong transmitter leakage and nearby unintended reflections while preserving delayed sensing echoes. On mobile platforms, mechanical vibration from engines, rotors, or nearby structures can induce quasi-periodic variation in the self-interference (SI) channel. The optimal cancellation coefficients may then vary within one adaptation period, causing the applied coefficients of a conventional adaptive filter to lag behind the moving SI channel and increasing the residual SI. To address this problem, we propose a Koopman-predictive SIC (KP-SIC) module that augments a conventional adaptive filter with a predicted coefficient trajectory. KP-SIC uses recent effective SI-channel coefficient snapshots to identify structured vibration-induced dynamics and predict a sample-varying coefficient sequence for the next adaptation period. The predicted coefficients place the canceller closer to the expected time-varying optimum, while the adaptive filter corrects residual prediction errors and unstructured variation. For evaluation, the module is integrated with a widely linear normalized least mean-square (WL-NLMS) filter under a flexible analog SIC (FASIC) framework. Simulations show that KP-SIC improves SI suppression by $6.3$--$10.2$~dB over conventional FASIC-WL-NLMS once the observation window spans at least about $1.5$ vibration cycles. Compared with a non-causal performance bound, KP-SIC achieves $60$--$74\%$ of the available prediction gain.

0.26

Beyond MSE: Rician Likelihood Denoising for Self-Supervised Cardiac $T2$ and $T1ρ$ MRI

eess.IV cs.CV ·2026-09-24 ·Nicholas A. Jacobs, Jason Mendes, Ravi Ranjan, Edward DiBella, Shireen Elhabian
similarity 0.49
Abstract · Made minor spelling and punctuation corrections

Magnetic resonance imaging involves an inherent trade-off among spatial resolution, acquisition time, and noise. This trade-off contributes to long scan times and high cost. Deep learning has improved image denoising, but cardiac MRI remains difficult because high-resolution, rapid acquisitions generally lack corresponding low-noise ground truth. Self-supervised denoising offers a potential solution by learning from noisy image pairs or even single noisy acquisitions. However, we show that Noise2Void-style blind-spot denoising, which uses a mean squared error (MSE) loss and assumes zero-mean, independent and identically distributed (i.i.d.) noise, is poorly suited to MR magnitude images. When applied to short-axis $T2$-weighted and $T1ρ$-weighted cardiac MRI with synthetic Rician noise, it produces biased denoised images and biased parametric maps of $T2$ and $T1ρ$. To address this limitation, we formulate self-supervised denoising as maximum likelihood estimation under a known Rician noise model. This yields unbiased denoisers that are competitive with supervised baselines.

0.22

Image Denoising Using Lower Semi-Frames

eess.IV cs.CV ·2026-08-21 ·Hemalatha M, P. Sam Johnson
similarity 0.47
Abstract

A blind image denoising framework based on an infinite directional lower semi-frame (DLSF) is proposed for additive white Gaussian noise. The model employs scale-dependent directional analysis with resolvent regularization of the unbounded semi-frame operator. Noise variance is estimated directly in the DLSF domain by modeling the joint covariance of four directional difference channels and applying covariance whitening to obtain a chi-square statistic. A lower-tail moment estimator provides blind noise estimation without median absolute deviation. The estimated noise level is incorporated into channel-wise Wiener-type shrinkage and canonical-dual synthesis, followed by a data-consistent iterative reconstruction with automatic stopping. Experiments on three standard grayscale images at noise levels 15--30 yield a mean relative noise-estimation error of 3.28\%, with average improvements of 7.45 dB in PSNR and 0.367 in SSIM. At 30/255 noise, the estimation error decreases to 1.73\%, with a mean PSNR gain of 8.31 dB. Results demonstrate effective noise suppression and structural preservation, with the strongest performance on smooth and edge-dominated images.

0.27

CallCleaner: Lightweight Bioacoustic Denoising from an Audio Foundation Model

eess.AS cs.LGcs.SD ·2026-11-08 ·Michael Xie, Gašper Beguš, Morris Alper
code/data similarity 0.47
Abstract · Project page: https://callcleaner.github.io

Many studies of animal vocalizations require clean recordings, but animals are usually recorded in the field, with background noise from weather, vehicles, and other animals. Animal vocalization denoising is challenged by the scarcity of clean training data and the extreme diversity of animal vocalizations. Classical spectral gates leave residual noise, especially without voice activity detection (VAD), while detector-free neural denoisers designed for bioacoustics remove less noise. We show that a general-purpose source separation foundation model, SAM-Audio, removes more noise than either of these types of methods, when used without training and prompted with time spans from a simple animal VAD. To turn this heavy method into a practical tool, we distill it into CallCleaner, a 19M-parameter denoiser that needs no detector and runs ~90x faster than real time on a laptop CPU. We find that SI-SDR has limited utility in our setting as it penalizes regenerated output and conflates noise removal with call fidelity, a trade-off our separate metrics reveal. CallCleaner leaves 11 dB less noise around the call than Biodenoising, the leading neural bioacoustic denoiser with public weights, and among fast, CPU-capable systems it pushes the Pareto frontier of noise removal vs. call fidelity, without requiring a detector. We release code and weights for CallCleaner, which enables fast, private, local denoising of single-caller recordings without specialized hardware.

0.20