CS Paper Radar

Generative Action-Chunk Sampling for Adaptive Stiffness Control in Physical Human-Robot Collaboration

Aoi Otake, Ferdinand Hartmann, Ko Igari, Shingo Murata

cs.RO cs.AIcs.LG ·submitted 2026-08-26 01:44 UTC · v2

Abstract

Physical human-robot collaboration requires a robot to provide assistance when human intention is clear while remaining compliant when several future motions are plausible. We present an adaptive stiffness framework based on generative action-chunk sampling. Conditioned on an RGB image and external joint-torque estimates, the policy samples multiple latent variables from an observation-conditioned prior and decodes them into future action chunks. Variation among the sampled action chunks is used to continuously adapt joint stiffness and damping. Greater variation makes the robot more compliant to facilitate human guidance, whereas lower variation provides firmer assistance. In a real-world collaborative transport task with four possible directions, the proposed method achieved an average success rate of 0.95, compared with 0.83 for a fixed-stiffness ablation and 0.69 for a deterministic baseline. Near direction determination, variation among the sampled action chunks increased, and the controller reduced stiffness accordingly. These results suggest that variation among actions sampled by a generative policy can serve as an online control signal for balancing assistance and compliance in physical human-robot interaction.

Comment
Preprint version

Closest papers

Nearest neighbours by meaning across the whole index.

Imp-ACT: Adaptive Impedance Control and Action Chunking with Transformers to Learn Contact-Rich Manipulation from Demonstrations

cs.RO ·2026-09-25 ·Luca Zanetti, Doganay Sirintuna, Idil Ozdamar, Pietro Balatti, Heng Zhang +1 more
similarity 0.70
Abstract · 9 pages, 5 figures, submitted to IEEE International Conference on Robotics & Automation 2027, for associated video see https://youtu.be/iAu_…

Contact-rich manipulation requires robots to balance accurate motion tracking with compliant interaction, yet most visual-action policies leave compliance fixed at the controller level. We present Imp-ACT, a methodologically grounded and practical approach to incorporating direction-dependent Cartesian stiffness modulation directly into demonstration collection, without manual stiffness selection or offline target reconstruction. During teleoperation, a self-tuning impedance controller adapts stiffness along the instantaneous direction of motion while maintaining compliance in orthogonal directions. The adapted stiffness is applied and recorded alongside visual observations and motion commands, capturing motion and compliance under the same dynamics. We implement this pipeline using Action Chunking with Transformer (ACT) to predict end-effector pose, gripper action, and motion-direction stiffness from visual, proprioceptive, and wrench observations. The performance of Imp-ACT is evaluated on wiping and plug insertion using both success rate and quantitative measures of contact behavior. Compared with fixed low- and high-stiffness baselines, Imp-ACT achieves comparable or higher success while maintaining low interaction forces. In wiping, it reduces contact-force vibration by approximately $29\times$ relative to the compliant baseline and $180\times$ relative to the stiff baseline. In plug insertion, it reduces forces orthogonal to the insertion direction by $43\%$ relative to the better fixed-stiffness baseline. These results highlight the benefit of maintaining sufficient stiffness along the direction needed for task execution while preserving compliance in other directions to limit contact forces and accommodate environmental constraints.

0.32

Temporal Tactile Encoding and Compliance for Intent-Aware Robot-to-Human Bimanual Handover

cs.RO ·2026-09-04 ·Pasquale Marra, Stefano Berti, Gabriele Mario Caddeo, Lorenzo Natale
code/data similarity 0.69
Abstract

Reliable robot-to-human handover requires the robot to infer when the person is ready to receive the object and release it safely, comfortably, and at the right time. This is challenging because visual observations alone may not disambiguate clear taking intent from accidental contact, weak grasping, wrong-direction forces, or transient interactions. In this work we treat human-robot handover as an intrinsically multimodal problem. Our approach couples a VLA model with a compliance controller that reduces interaction forces during object transfer. We finetune the VLA model with human demonstrations using RGB observation, temporally encoded tactile feedback and proprioception. We evaluate the complete system in a human-subject study against two baselines: one without tactile feedback and one using tactile feedback without compliance control. We hypothesize that combining compliance and temporal tactile encoding yields the most reliable and comfortable handovers, as compliance facilitates physical interaction while tactile history captures sustained taking intent. Performance is measured through objective metrics and an ad-hoc questionnaire. The results show that the two components provide complementary benefits and substantially outperform the baselines. Project page: https://hsp-iit.github.io/temporal-tactile-bimanual-handover/.

0.28

ImpedanceMimic: Learned Impedance as Action Space for Force-Accurate Motion Imitation

cs.RO cs.GRcs.LG ·2026-11-14 ·Matthias Jammot, Pembe Gizem Özdil
code/data similarity 0.68
Abstract · 39 pages, 13 figures, 28 tables. Project page: https://impedancemimic.github.io/ImpedanceMimic/

Recovering the forces behind a motion is ill-posed: different controllers can reproduce the same movement while generating different contact forces. Physics-based motion imitation resolves this ambiguity through simulation, but relies on fixed-gain proportional-derivative (PD) control. We show that fixed gains impose a trade-off between motion and force tracking, as contact and swing place conflicting demands on joint stiffness and damping. We introduce ImpedanceMimic, a reinforcement-learning policy that modulates per-joint stiffness, damping, and position setpoints from motion and force measurements, but requires only motion at inference. Across 129 participants and six activities, ImpedanceMimic outperforms matched fixed-gain PD under every integration scheme, direct-torque, muscle-actuated and existing imitation controllers in kinematic and force fidelity, approaching a dedicated motion-to-force regressor. By expressing gains as multiples of inertia-scaled priors, a single policy controls subject-specific biomechanical models without explicit anthropometric input and transfers zero-shot to unseen humans and a humanoid robot. The learned impedance forms a low-dimensional representation of motor state, shared across bodies, that generalizes to withheld activities: stiffness scales with load, and damping anticipates unloading.

0.17

Learning from Humans for Proactive Assistance in Human-Robot Collaborative Transport

cs.RO cs.HCcs.LG ·2026-09-21 ·Elvin Yang, Christoforos Mavrogiannis
similarity 0.68
Abstract

We focus on human-robot collaborative transport, a challenging task of broad relevance spanning logistics, manufacturing, and the home, in which a user and a robot work together to relocate a large or heavy object. To act as an effective partner, the robot should reduce the user's effort by contributing to efficient relocation of the object while remaining physically responsive to them. Prior work often addresses these capabilities separately, producing robots that may move the object efficiently but resist user input, or accommodate the user but depend on continuous guidance. Our key insight is that obstacle-constrained collaborative transport requires integrating predictions of human collaborative behavior with compliant robot control. To this end, we introduce PROACT, a framework for human-robot collaborative transport that incorporates anticipation into compliant whole-body control through a learned model of human collaborative behavior. Trained on a large-scale, real-world dataset of dyadic human transport demonstrations, our transformer architecture distills collaborative behavior into predictions of future object motion. Across 108 real-world trials with a 9-DoF mobile manipulator, PROACT reduces mean interaction work by 59.2\% and 20.4\%, and mean completion time by 12.9\% and 6.9\%, relative to compliance-only and MPC baselines, respectively. Footage from our experiments can be found at https://youtu.be/qAGvQfVPjbk.

0.35

Immiscible Diffusion Policy: Preserving Multimodal Robot Actions through Label-Free Noise Assignment

cs.RO cs.LG ·2026-10-07 ·Xiao Zhang, Yuxin Chen, Zhixuan Liang, Guojian Zhan, Chenran Li +3 more
hot direction similarity 0.68
Abstract

When diffusion policies were first introduced, they were expected to recover multi-modal action distributions. However, we find this expectation does not always hold, as diffusion policies often collapse to a single modality even when we guarantee the balance of dataset modalities and exact within-batch symmetry. Our analysis indicates that independent action-noise pairing contributes to this failure by increasing mixing and crossing among diffusion paths, which can produce averaged denoising responses and suppress modality-specific behavior. This issue is especially severe in robot planning, where action spaces are dense and low-dimensional, significantly increasing such mixing and crossing. To alleviate this problem, we propose Immiscible Diffusion Policy, a label-free training-time add-on to diffusion policy that uses action-noise assignment to preserve relatively distinct noise-to-action routes without modifying the policy architecture or inference procedure. Across five simulated and two real-world humanoid manipulation tasks spanning state, RGB, and point-cloud observations, our method significantly improves the policy's preservation of action modalities while maintaining strong task performance. It increases the proportion of the non-dominant modality by 6.0x-14.6x across three two-modality tasks and recovers demonstrated modalities that are entirely absent from vanilla policy rollouts on both four-modality tasks. These results demonstrate that Immiscible Diffusion Policy provides a simple yet robust approach to preserving action multi-modality in general robot learning tasks.

0.26

UniReflex: Plug-and-Play Force Control for Pretrained Generative Policies via Fast-Slow Reflex

cs.RO ·2026-08-18 ·Yan Huang, Shoujie Li, Ziwu Song, Wenbo Ding
highly cited similarity 0.68
Abstract

Generative imitation learning policies excel at trajectory planning but lack closed-loop force regulation, while directly incorporating force modalities often requires redesigning or retraining the network. We present UniReflex, a universal plug-and-play framework that equips frozen generative policies with variable impedance control (VIC) for contact regulation, guided by force-direction intent collected during demonstration, without further slow-backbone fine-tuning. By non-invasively intercepting deep latent representations from the action head, UniReflex drives a fast reflex network that decouples active force exertion from external interaction response. This scheme predicts normalized anisotropic stiffness directions for directional compliance allocation. Furthermore, UniReflex integrates an adaptive gating mechanism that enables seamless transitions between position-dominant planning and force-dominant execution. Real-world bimanual experiments demonstrate that UniReflex significantly improves contact stability and success rates while preserving original position accuracy. Our approach achieves 25-66x lower per-step backward latency relative to joint training strategies on the evaluated backbones.

0.48

CompliantBot: Learning Whole-Body Compliance across Task Interfaces for Humanoid Control

cs.RO ·2026-11-01 ·Haoyang Li, Keqi Zhu, Zhanxiang Cao, Yang Zhang, Yizhi Chen +2 more
similarity 0.67
Abstract · 12 pages, 8 figures, 5 tables

Humanoid controllers need the ability to yield to external forces while retaining the capacity to resume their original tasks. However, tracking objectives penalize the deviations needed for yielding, while relaxing tracking goals persistently can make task recovery harder. Existing approaches often rely on task-specific interaction command interfaces or constructed compliant motion data and reference trajectories, limiting the direct reuse of their compliance-training mechanisms across different task interfaces. We introduce CompliantBot, a compliance-training framework for motion tracking and velocity-command locomotion. It preserves the original task inputs and requires no preconstructed compliant data or target trajectories. A state-dependent interaction force field couples applied loads to the robot's motion, enabling local articulation and whole-body movement to change the forces experienced. A complementary force-magnitude reward encourages lower interaction loads, while task rewards are downweighted during loading and restored after release to coordinate yielding and task resumption. The trained policies use task inputs and proprioceptive history without explicit external-force measurements. Across both task interfaces, CompliantBot yields farther under constant pulls and experiences lower spring interaction loads than matched baselines, while resuming task tracking after force removal. CompliantBot achieves the highest task completion among the compared methods under stronger pulls. Power evaluations further show that CompliantBot has the lowest mean joint mechanical power among the compared methods. Real-robot demonstrations further illustrate compliant responses through arm motion, stepping, and body reorientation.

0.23

Learning Robot Policies for Whole-Body Mobility Assistance via Dynamic Human Motion Generation

cs.RO ·2026-10-13 ·Shikun Ban, Shohei Nagai, Qingyang Song, Hanxi Wan, Eric Zhao +2 more
code/data similarity 0.67
Abstract · 9 pages, 8 figures, 3 tables

Robotic assistance for human mobility could benefit care recipients and reduce caregiver burden during physically demanding tasks such as Sit-to-Stand (STS) and Lift-and-Transfer (L&T). Learning robot policies for these whole-body assistive tasks is challenging: real-world data collection for human-robot interaction is costly and safety-critical, making simulation an attractive alternative. Prior work, however, typically treats the human as static or minimally responsive and thus fails to capture the cooperative nature of mobility assistance. We present a simulation-based framework for learning whole-body assistive robot policies. At its core is a human policy trained with an adversarial motion prior that produces realistic care-recipient motion in response to the robot's actions. A human-adaptive scripted controller interacts with this policy to collect diverse robot demonstrations at scale. From these demonstrations, we train 3D diffusion policies that map segmented human point clouds and robot joint positions to whole-body actions for a mobile manipulator, without relying on privileged human state at deployment. The resulting robot policies successfully perform both STS and L&T assistance in simulation. Preliminary experiments further demonstrate sim-to-real transfer for STS after fine-tuning on a small amount of real-world data. Videos are available on our project page: https://rchi-lab.github.io/human-gen-mobility-assistance/

0.34