CS Paper Radar

Designing Core Layer in Campus Network Using Software-Defined Networking

Iwan Setiawan, Azis Wisnu Widhi Nugraha, Sauqi Asrorul Zaza

cs.NI ·submitted 2026-08-26 04:47 UTC · v1

Abstract

As one of the layers in campus network, core layer or backbone network should provide interconnectivity and routing between internal and external networks, including other campus networks or the Internet. With that requirement, designing this layer to be highly available to interconnect and route traffic is a high priority. By using software-defined networking (SDN) paradigm, we attempt to design core layer in campus network employing best practices of network topology and routing protocol at the layer with a use case of core layer in a university campus network. We use RouteFlow as the SDN platform supporting a traditional routing protocol, i.e. Open Shortest Path First (OSPF), over OpenFlow (OF) network infrastructure. The experimental testbed/environment consists of two virtual machines (VMs). The first VM is used as the SDN/OF data plane with Open vSwitch in Mininet network emulator, and the second one representing SDN control plane comprising RouteFlow with POX controller. We evaluated the design by testing the interconnectivity using ping for the OF switches in the topology and hosts that are connected to the switches. We also tracked the route of the packets by monitoring traffic passed through all network interfaces of the switches using tcpdump. This case was evaluated since we need to make sure that packets were routed with the shortest path from source to destination using OSPF that was implemented in the virtual network at the top of the SDN platform.

Comment
9 pages, 4 figures, 6 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Software Design Patterns for Latency Measurements with eBPF in SDN Environments

cs.PF cs.NIcs.SE ·2026-11-03 ·Pedro Lucas M. S. Rosa, Bruno L. Dalmazo, Leticia S. Machado, Jéferson Campos Nobre
published similarity 0.57
Abstract · This manuscript has been accepted for presentation at the IEEE International Symposium on Computers and Communications (ISCC 2026)

This work proposes, implements, and evaluates a modular architecture based on software design patterns applied to latency measurement in Software-Defined Networks (SDN) using the Extended Berkeley Packet Filter (eBPF) and the Express Data Path (XDP). Unlike approaches that focus solely on measurement precision, this study examines how design patterns can structure observability systems in an extensible and maintainable way while preserving data-plane efficiency. The proposed architecture applies the Observer, Strategy, and Factory Method patterns to modularize the metric collection and analysis pipeline, allowing dynamic integration of policies and data sinks. The experimental environment was implemented with Mininet, Python agents, and eBPF/XDP programs, and was evaluated in terms of processing time, overhead, and evolution effort. The results show that the introduction of design patterns shows no clear evidence of measurable performance degradation, maintaining continuous measurements with a minimum of 5% overhead. The findings suggest that software engineering practices may be applied to the construction of eBPF-based monitoring and observability systems.

0.35

Netkit: Specializing Linux Packet Delivery for Container Networks

cs.OS cs.NI ·2026-09-16 ·Daniel Borkmann, Paul Chaignon
top venue similarity 0.56
Abstract · Accepted for publication at eBPF'26

Cloud-native microservices architectures rely on network namespaces for isolation, with the overhead of container communications remaining a critical performance bottleneck. While colocating containers on the same host mitigates some of this overhead, it cannot match the performance of communication within a single network namespace. Existing solutions either require application rewrites or fail to support the full Linux network stack expected by containerized applications. In this paper, we present netkit, an eBPF-based datapath that specializes the Linux networking stack to eliminate redundant backlog queue traversals during network namespace transitions. netkit leverages eBPF to transparently redirect packets between namespaces, bypassing unnecessary buffering while preserving compatibility with existing container applications. Our implementation in the Linux kernel, integrated with minimal changes to the Cilium network plugin for Kubernetes, improves throughput by up to 37\% and achieves parity between container-to-container and process-to-process communications, effectively closing the performance gap introduced by namespace isolation.

0.54

A DIY DPDK Software Router for Networking Education

cs.NI ·2026-10-21 ·Sebastian Gallenmüller, Stefan Lachnit, Manuel Simon
similarity 0.54
Abstract

High-performance packet processing frameworks, such as the Data Plane Development Kit (DPDK), are widely used in modern network systems, yet they are rarely integrated into networking curricula. As a result, students often lack exposure to the performance considerations and low-level design choices that shape real-world packet processing systems. We describe a semester-long course project in which students implement a do-it-yourself (DIY) software router using DPDK in a master-level computer networking course. The project guides students through the design and implementation of a multithreaded router, the development of a routing table data structure, and the evaluation of forwarding performance using standard benchmarking tools. We present the project structure and the virtualized infrastructure used to support classes of realistic size. Based on several iterations of the course and survey feedback from participating students, we discuss the observed workload, learning outcomes, and challenges of teaching high-performance packet processing. We release the project material and scripts to recreate the infrastructure, enabling reuse and further refinement by the community.

0.28

Resource versus Responsiveness: Benchmarking SDN Controller Runtimes for a Moving-Target-Defense Control Plane at Scale

cs.NI ·2026-09-28 ·Souhail Chakkour, Umesh Biswas, Charan Gudla
similarity 0.53
Abstract · Preprint. 8 figures, 3 tables. Extends our preliminary DSN-S 2026 work on CPAM with a three-controller evaluation of Ryu, OpenDaylight, and …

Network Moving Target Defense (MTD) built on Software-Defined Networking (SDN) continuously rotates host-facing addresses to invalidate an attacker's reconnaissance. Each rotation creates a burst of control-plane mutations, while new connections may simultaneously require reactive flow installation. Yet SDN controller runtime is usually treated as an implementation detail in the MTD literature. We show that it materially affects performance. We port the same Continuity-Preserving Address Mutation (CPAM) logic to three widely used controllers: Ryu (single-threaded cooperative Python), OpenDaylight, and ONOS (both multi-threaded JVM), and evaluate them on an identical 500-host campus fabric using an RFC 8456-aligned methodology with ten runs per controller. All three provide near-zero loss, sub-millisecond jitter, and preserve established sessions, but their control-plane behavior differs sharply. OpenDaylight and ONOS keep reactive latency low and stable, whereas Ryu serializes reactive flow installation behind periodic rotation work, increasing reactive RTT by about 100x and causing a small number of setup-time failures. Ryu uses far less memory, while ONOS achieves OpenDaylight-class reactive latency with the lowest CPU utilization of the three and a smaller live heap than OpenDaylight. These results expose distinct resource-versus-responsiveness operating points and show that controller selection should be treated as a first-class design decision in SDN-based MTD.

0.46

Open-source emulation-based test environment to settle O-RAN-compliant trials

cs.NI ·2026-09-16 ·Ramon Fontes, Allan Martins, Vicente Sousa, Kaio Dantas, Lucas Medeiros +9 more
published similarity 0.51
Abstract

Experimental tools are a key factor in both academic and industrial research communities to create design evaluations of new networking technologies that involve troubleshooting or changing the planning of deployed networks. Physical Software-Defined Radio (SDR) experimental platforms enable a design solution for the quick prototyping of wireless communication systems. However, SDR-based experimental platforms incur high costs, which leads to scalability limitations in the experimental settings. Having said this, network simulators, emulators, and new testbeds have attracted increasing attention. Emulation-based research prototyping can be distinguished from real communication networks and SDR-based platforms by allowing a tradeoff between cost and flexibility. This paper examines the Mininet-RAN emulation tool, which, as well as Radio Access Network (RAN) modeling, provides a way to test Open RAN Intelligent Controller (RIC) services without the need to deploy an entire RAN infrastructure. The Mininet-RAN creates virtual network elements, such as hosts, L2/L3 devices, controllers, and links, by combining some of the best emulator features, hardware testbeds, and simulators. By running the current code of standard practice Unix/Linux network applications and network stack, the Mininet-RAN enables real-world network data traffic patterns to be delivered to the RIC, regarding the most significant aspect of the dynamic generation of wireless system's KPIs. We provide the basic code of Mininet-RAN for the first two O-RAN Alliance-defined use cases involving V2X and UAV. The xApps are being implemented in O-RAN SC near-RT RIC, with Mininet-RAN which provides a closed-loop validation environment.

0.49

Hierarchical Traffic Engineering for Scalable Software-Defined Satellite Networks

eess.SY ·2026-11-18 ·Mohamed Khiari, Wiem Abderrahim, Olfa Ben Yahia, Fatma Abdelkefi, Wessam Ajib +1 more
similarity 0.51
Abstract

Future satellite systems are shifting toward regenerative payloads that interconnect many modem banks into a reconfigurable on-board network. However, conventional constellation-level routing overlooks intra-payload congestion and load imbalance, which can limit the traffic each satellite can accommodate. This paper proposes a hierarchical software-defined networking (SDN)framework for traffic engineering (TE) across both the constellation and payload levels. The system is represented by a two-level graph, where each satellite node in the constellation graph is expanded into an internal network of interconnected modem banks. The proposed hierarchical payload-aware allocation (HPAA) algorithm coordinates the two levels through the exchange of assigned traffic demand and advertised capacity budgets. Simulation results show that, under heavy load, HPAA delivers about 9 times the throughput of shortest-path routing, with 17% lower end-to-end delay and no packet loss. These findings highlight that hierarchical control accounting for the on-board network constraints of regenerative payloads is a key lever to improve the performance of satellite constellations.

0.23

CALIPER: Calibrating HPC/AI Network Simulators

cs.NI cs.DC ·2026-10-12 ·Seyyidahmed Lahmer, Daniel Seibel, Srijeet Basu, Arno Troch, Jayesh Badwaik +7 more
similarity 0.51
Abstract

Network simulation plays an important role in HPC/AI system research by enabling exploration of network architectures, communication strategies, and system configurations at scales that may be impractical to study experimentally. Existing approaches to network simulator calibration and validation lack a principled methodology that combines parameter alignment, constrained inference, and independent validation for collective-centric HPC/AI networks. We present CALIPER, a methodology for systematic calibration and validation of HPC/AI network simulators. CALIPER distinguishes directly observable system parameters from auxiliary parameters which are configured via calibration and constrains the latter to feasible domains consistent with the target system. We evaluate CALIPER's hierarchical, scale-aware calibration and its effects on parameter identifiability and generalization using collective communication benchmarks on a reference system with up to 64-nodes at the Jülich Supercomputing Centre. Validation results show that the calibrated parameter configurations identified by CALIPER predict system performance with less than 5% mean errors across scale-up and scale-out network domains. CALIPER demonstrates that hierarchical, constrained calibration can produce simulator configurations whose predictive accuracy persists beyond the observations used for fitting.

0.25

NetConfArena: An Executable Benchmark for LLM Agents in Closed-Loop Network Configuration

cs.NI cs.AI ·2026-08-24 ·Chang Liu, Xiaohui Xie, Xinyi Chen, Yong Cui
benchmark similarity 0.51
Abstract

Large language model (LLM) agents are increasingly attractive for automating network configuration, yet their reliability and failure patterns are poorly understood. An essential prerequisite is to assess such agents in a realistic but risk-free environment. Existing benchmarks, however, fall short: they often treat configuration as static command generation or rely on overly simplified settings. Such evaluations understate the core challenges of network configuration, where correctness requires reasoning about protocol complexity and topology dependence. We present NetConfArena, an executable benchmark for evaluating LLM agents in closed-loop network configuration. NetConfArena places agents in emulated multi-device networks, provides a standardized and compact action interface for task execution, and evaluates the resulting network behavior with hidden task-specific executable test cases. The benchmark relies on an LLM-assisted, emulation-grounded pipeline, which converts human-oriented network materials into reusable parameterized task templates. We evaluate representative LLM agents on 480 task instances instantiated from 96 protocol-focused task templates, yielding 3840 execution trajectories, and show that failures are not limited to command errors. The failures also reveal gaps in task-specification adherence and robust planning and execution. These findings suggest two future directions: using validated trajectories as supervision signals to improve foundation models, and designing harness mechanisms that make agent execution more reliable and accountable.

0.38