CS Paper Radar

Open-source emulation-based test environment to settle O-RAN-compliant trials

Ramon Fontes, Allan Martins, Vicente Sousa, Kaio Dantas, Lucas Medeiros, Pedro Alves, Marcelo Fernandes, Iago Rego, Eduardo Aranha, Vinícius Filho, Mateus Goldbarg, Wysterlanya Barros, Roger Immich, Augusto V. Neto

cs.NI ·submitted 2026-09-16 00:19 UTC · v1
published

Abstract

Experimental tools are a key factor in both academic and industrial research communities to create design evaluations of new networking technologies that involve troubleshooting or changing the planning of deployed networks. Physical Software-Defined Radio (SDR) experimental platforms enable a design solution for the quick prototyping of wireless communication systems. However, SDR-based experimental platforms incur high costs, which leads to scalability limitations in the experimental settings. Having said this, network simulators, emulators, and new testbeds have attracted increasing attention. Emulation-based research prototyping can be distinguished from real communication networks and SDR-based platforms by allowing a tradeoff between cost and flexibility. This paper examines the Mininet-RAN emulation tool, which, as well as Radio Access Network (RAN) modeling, provides a way to test Open RAN Intelligent Controller (RIC) services without the need to deploy an entire RAN infrastructure. The Mininet-RAN creates virtual network elements, such as hosts, L2/L3 devices, controllers, and links, by combining some of the best emulator features, hardware testbeds, and simulators. By running the current code of standard practice Unix/Linux network applications and network stack, the Mininet-RAN enables real-world network data traffic patterns to be delivered to the RIC, regarding the most significant aspect of the dynamic generation of wireless system's KPIs. We provide the basic code of Mininet-RAN for the first two O-RAN Alliance-defined use cases involving V2X and UAV. The xApps are being implemented in O-RAN SC near-RT RIC, with Mininet-RAN which provides a closed-loop validation environment.

Journal ref
ITU Journal on Future and Evolving Technologies, Volume 4 (2023), Issue 2, Pages 350-363
DOI
10.52953/VMBQ6087

Closest papers

Nearest neighbours by meaning across the whole index.

Open-Source 5G RAN Platforms: A Dual Perspective on Performance and Capabilities

cs.NI ·2026-08-26 ·Maria Katarine Santana Barbosa, Iasmin Gomes, Vinícius Melo, Kelvin Lopes Dias
code/data similarity 0.67
Abstract · This paper has been published in IEEE WCPNS 2025

Open-source implementations of the fifth generation (5G) Radio Access Network (RAN), such as OpenAirInterface (OAI) and srsRAN, have become increasingly relevant for industry and academic research, rapid prototyping, and low-cost private 5G deployments. The state of the art presents different evaluation scenarios for both platforms; however, these are often limited to individual testbed evaluations, end-to-end studies, or partial comparisons between them. In particular, there is a lack of evaluations considering different Software-Defined Radios (SDRs), RAN configurations, user applications, and numbers of real UEs. To address this gap, this paper presents a comparative evaluation of OAI and srsRAN. The study includes a qualitative assessment of supported features and deployment flexibility, followed by a quantitative performance analysis covering radio resource control setup procedures, compliance with theoretical data rates, and real application workloads with diverse quality of service requirements. Specifically, we consider Video on Demand (VoD) for data rate evaluation, Live Streaming (LS) and Cloud Gaming (CG) as latency-sensitive applications. These workloads provide a comprehensive view of each platform capability.

0.62

Interoperability Assessment of Fronthaul and E2 Interfaces for Multi-Vendor Open RAN Systems

cs.NI eess.SP ·2026-11-01 ·Farhad Mehran, Charles Turyagyenda, Dritan Kaleshi
published similarity 0.64
Abstract · Proceedings of European Wireless 2025, Sophia Antipolis, France, pp. 91-96. Published by VDE VERLAG

Open Radio Access Networks (RANs) aim to transform the existing wireless network architectures by adopting open interfaces, disaggregating and virtualising RAN components, and enabling dynamic control of the system via data-driven methods. To accelerate the development of interoperable RAN solutions, rigorous assessment of Open Fronthaul and E2 interfaces based on O-RAN Alliance Interoperability Testing (IOT) specifications plays a key role as the integration of these interfaces seems to be very challenging, e.g. due to the need for alignment of Fronthaul IOT profiles and unforeseen challenges for E2 interface integration as Near-Real-Time RAN Intelligent Controller (Near-RT RIC) is relatively a new component introduced within the RAN architecture. In this paper, selected parts of the latest findings and lessons learned from interoperability assessment of Open Fronthaul and E2 interfaces for 13 multi-vendor Open RAN systems deployed in SmartRAN Open Network Interoperability Centre (SONIC) Labs are presented.

0.53

ONDT: A Modular and Virtualized O-RAN Digital Twin for xApp/rApp Closed-Loop Experimentatio

cs.NI ·2026-10-06 ·Miguel Catalan-Cid, Joan Josep Aleixendri, August Betzler, George Oikonomou, Lydia Ntzogani +1 more
published similarity 0.63
Abstract

Open Radio Access Network (O-RAN) architectures extend programmability in next-generation cellular networks through Near-Real-Time and Non-Real-Time RAN Intelligent Controllers (RICs), enabling AI/ML-driven xApps and rApps to optimize network behavior dynamically. However, validating automated closed-loop control algorithms in live environments presents significant operational risks and deployment costs. To address this challenge, this paper introduces the O-RAN Digital Twin (ONDT), a modular, virtualized, and cloud-native experimentation framework developed as a 6G enabler within the SNS SUNRISE-6G project. We present the ONDT architecture and its end-to-end experimentation workflows, showing how the framework automates O-RAN-compliant rApp/xApp onboarding, RAN scenario configuration and initialization, Key Performance Metric (KPM) collection, and closed-loop control validation. Experimental validation using Juniper RIC platforms and the Keysight RICtest emulation framework demonstrates ONDT ability to provide an isolated and reproducible environment for KPM monitoring, cell ON/OFF control, automated dataset generation, and rApp/xApp validation.

0.35

Designing, Deployment and Field Testing of C2Stack for Networked Intelligent Software-Defined UAVs

eess.SY ·2026-08-28 ·Maxwell McManus, Zhaoxi Zhang, Sidharth Santhi Nivas, Yuqing Cui, Prem Sagar Pattanshetty Vasanth Kumar +6 more
top venue similarity 0.60
Abstract

Unmanned Aerial Vehicles (UAVs) are emerging as critical enablers of next-generation wireless networking and autonomous systems. Despite their potential, deploying and testing networked UAV systems in real-world environments remains challenging, largely due to the absence of well-developed, end-to-end, ready-to-use protocol stacks. To fill this gap, we present C2Stack, a configurable protocol stack and experimental framework designed for real-time control, evaluation, and optimization of UAV networks. C2Stack incorporates a modular control plane, referred to as the~C2Stack Network Operating System (CNOS), alongside a programmable data plane that exposes APIs for cross-layer algorithm development, digital twin integration, and autonomous swarm control. In this article, we share our experience with the deployment and testing of C2Stack. We implemented C2Stack on a custom UAV swarm platform that integrates multiprocessor system-on-chip (MPSoC) radios with Intel NUC computing modules, enabling interoperability with various RF front ends. Field trials were conducted in both netted environments and large-scale outdoor test ranges, focusing on two representative use cases: (i) network utility maximization through online reinforcement learning, and (ii) collaborative interference source localization. The experiments demonstrate the feasibility of real-time, data-driven optimization in dynamic aerial environments, while also revealing practical challenges in field deployments of networked UAV systems, including power constraints, sensing limitations, and deployment logistics. We have made C2Stack source code available to the community under the MIT License, with the goal of establishing it as a foundational framework for experimental research on intelligent networked aerial systems.

0.37

AI-Native Open RAN: A Roadmap from xApps and rApps to Autonomous Network Agents

cs.NI ·2026-09-14 ·Ryan Barker, Alireza Ebrahimi Dorcheh, Tolunay Seyfi, Mohammad Raihan Uddin, Alireza Mohammadhosseini +4 more
similarity 0.60
Abstract

Open Radio Access Networks (O-RAN) have emerged as a transformative paradigm for future wireless systems by introducing openness, virtualization, disaggregation, and programmable intelligence through the RAN Intelligent Controller (RIC). The availability of standardized interfaces and near-real-time control loops has created unprecedented opportunities for integrating artificial intelligence (AI) into radio access network management and optimization. Over the past several years, a broad range of AI techniques have been proposed to address key O-RAN challenges such as radio resource management, network slicing, traffic prediction, mobility management, interference mitigation, and spectrum sharing. Despite significant progress, existing solutions often remain task-specific, require extensive retraining, and exhibit limited generalization across deployment environments and network conditions. This paper presents a comprehensive review of AI-enabled O-RAN systems and provides a unifying perspective on the evolution of intelligence in wireless networks. We first examine the O-RAN architecture and the role of intelligence within near-real-time and non-real-time RIC frameworks. We then develop a taxonomy of AI approaches for O-RAN, covering machine learning, deep reinforcement learning (DRL), digital-twin-assisted optimization, and emerging foundation-model-based architectures.

0.04

Intent-Defined Radio: A Goal-Native Architecture for Next-Generation Wireless Networks

cs.NI cs.IT ·2026-11-19 ·Wencheng Yan, Binrui Xu, Yihao Shen, Zhiyuan Jiang, Sheng Zhou
similarity 0.60
Abstract · 7 pages, 4 figures

Wireless systems are becoming harder to operate because service goals are increasingly expressed in outcome-oriented terms, while radio platforms still expose mainly low-level configurations and protocol-specific controls. This mismatch makes it difficult to translate latency, reliability, throughput, and continuity requirements into coherent radio behavior. This article argues for Intent-Defined Radio (IDR) as a new system abstraction for next-generation wireless networks. Rather than treating the radio stack as a fixed mechanism set to be manually engineered and then tuned, IDR connects explicit service goals to executable radio behavior within a constrained design space by leveraging the capacity of large language models (LLMs). We position IDR relative to programmable radio, intent-based networking, and learning-based protocol design. We also present two simulation studies using Intent2MAC to illustrate the design loop, demonstrating executable MAC synthesis and offline refinement guided by evaluation feedback. The results show improved service satisfaction at a throughput cost and improved remote-control performance when random contention is replaced by distributed urgency-based arbitration. We finally discuss the open challenges in intent specification, evidence, hardware execution, interoperability, and lifecycle cost, and outline a staged path toward deployment.

0.30

EmbedGym: Letting Coding Agents Develop and Debug Embedded Firmware Without Physical Hardware

cs.SE cs.AI ·2026-11-16 ·Minghui Zhao, Yiming Li, Sophie Zhu, Maxwell Khor, Lauren Ouyang +3 more
similarity 0.58
Abstract

Modern coding agents perform well on general software benchmarks because they can run code and unit tests in a closed loop. Embedded firmware development, however, breaks this loop: a program that compiles can still fail on real hardware due to pin polarity, bus protocol, timing, or networking bugs that an agent at a text terminal cannot observe. Existing embedded coding agents either skip hardware execution, drive GPIO-only simulators with multi-second delays, or test on physical boards in a static environment. In this paper, we present EmbedGym, an interactive virtual hardware environment that lets coding agents develop and debug embedded firmware without physical hardware. EmbedGym uses instruction-level microcontroller unit (MCU) emulators to execute the same binary that would be flashed onto a physical board, connects them to 41 peripheral models, an analog circuit simulator, and virtual WiFi/Bluetooth Low Energy (BLE) endpoints, and exposes an interface for agents to change sensor inputs, press buttons, and inspect hardware states. On top of it, we build EmbedGym-Bench, which consists of 598 tasks across 6 MCU-framework pairs graded by hidden timed test vectors, using a five-stage multi-agent workflow that synthesizes peripheral models and tasks from datasheets and driver libraries. We expose EmbedGym to a coding agent at three levels and evaluate eight models over more than 14K trajectories. Even when compilation succeeds 99.7% of the time, 19.9% of compiled firmwares fail at runtime (up to 73% on individual targets). In contrast, interactive hardware testing in EmbedGym increases pass rates across models by +4.9% to +14.7% (up to +31% on individual targets). Our results also show that an agent with EmbedGym outperforms prior embedded agent frameworks, and lightweight models with EmbedGym match frontier models without it at 30-70x lower cost.

0.28

Semantic-Aware Communications in Industrial IoT:What Can Be Tested Today, and What Is Missing?

cs.NI ·2026-11-09 ·Rute C. Sofia
similarity 0.58
Abstract

Classical networks treat every bit as equally important, which wastes time and energy in factories and requires extra traffic engineering for critical traffic. Semantic communications send only what a task needs, but how can they be tested under realistic conditions? This paper examines what can be tested today in 6G industrial IoT, that is, networks of factory machines, robots, and sensors, and what is still missing. It introduces semantic importance, a score attached to each message that states how much the message matters, and uses it in a context-driven design to derive eight testing needs. Existing simulators, emulators, testbeds, codecs, and learning frameworks are assessed against these needs, which reveals five gaps. We propose a toolchain of four components built around the ns-3 simulator for simulated and emulated scenarios.

0.23