CS Paper Radar

Open-Source 5G RAN Platforms: A Dual Perspective on Performance and Capabilities

Maria Katarine Santana Barbosa, Iasmin Gomes, Vinícius Melo, Kelvin Lopes Dias

cs.NI ·submitted 2026-08-26 14:02 UTC · v1
code/data

Abstract

Open-source implementations of the fifth generation (5G) Radio Access Network (RAN), such as OpenAirInterface (OAI) and srsRAN, have become increasingly relevant for industry and academic research, rapid prototyping, and low-cost private 5G deployments. The state of the art presents different evaluation scenarios for both platforms; however, these are often limited to individual testbed evaluations, end-to-end studies, or partial comparisons between them. In particular, there is a lack of evaluations considering different Software-Defined Radios (SDRs), RAN configurations, user applications, and numbers of real UEs. To address this gap, this paper presents a comparative evaluation of OAI and srsRAN. The study includes a qualitative assessment of supported features and deployment flexibility, followed by a quantitative performance analysis covering radio resource control setup procedures, compliance with theoretical data rates, and real application workloads with diverse quality of service requirements. Specifically, we consider Video on Demand (VoD) for data rate evaluation, Live Streaming (LS) and Cloud Gaming (CG) as latency-sensitive applications. These workloads provide a comprehensive view of each platform capability.

Comment
This paper has been published in IEEE WCPNS 2025
Journal ref
10.1109/WCNPS69127.2025.11295920

Closest papers

Nearest neighbours by meaning across the whole index.

Virtualized 5G Tesbed using OpenAirInterface: Tutorial and Benchmarking Tests

cs.NI ·2026-09-11 ·M. Dória, V. Sousa, A. Campos, N. Oliveira, P. Eduardo +7 more
publishedbenchmarkhighly cited similarity 0.74
Abstract

The development of 5G and its evolutionary path to 6G brings virtualization as close as possible to the antennas. Native 3GPP systems are now software running at servers boosted by accelerator cards to cope with computationally intense signal processing. Meanwhile, the Radio Frequency (RF) front-end is still proprietary hardware, sheltering specific PHY-layer procedures like passband amplification/modulation. This approach takes advantage of the software's flexibility while keeping the complex microsecond signal processing performance from modern telecommunication systems. This paper provides tutorial material on the Core Network and Radio Access Network of OpenAirInterface (OAI) 5G stack on top of Universal Software Radio Peripheral (USRP) platforms. A set of blueprints showcases OAI's ability to provide a virtualized 5G network with different transmission capabilities and the possibility to use it with commercial mobile phones. Configuration discussions and throughput benchmark analyses follow installation and deployment instructions. Our results show that 5G prototyping using OAI and USRP frontends can lead to good reproducibility and consistent throughput.

0.49

Benchmarking Open-Source O-RAN and 5G NTN Stacks on Embedded ARM Platforms for Space Payloads

cs.NI cs.PF ·2026-11-18 ·Esteban Municio, Oscar Baselga, Oscar Lasierra, Gines Garcia-Aviles, Xavier Costa-Pérez
benchmarkcode/data similarity 0.70
Abstract · 11 Pages, 6 Figures, 6 Tables. Aeroconf

Regenerative satellite payloads, which host the 5G Next Generation Node B (gNB) onboard instead of transparently relaying the radio signal, are a key building block of the Non-Terrestrial Network (NTN) integration that 3GPP started in Release 17. Combining them with the Open Radio Access Network (O-RAN) architecture adds software-defined control through RAN Intelligent Controllers (RICs), enabling in-orbit reconfiguration, multi-tenancy, and data-driven radio resource management. Open-source implementations make this vision accessible to research institutions and New Space missions, yet there is little quantitative evidence on how they behave on the embedded processors that a satellite can actually carry. This paper presents an out-of-the-box experimental benchmark of two open-source gNB stacks (i.e., OpenAirInterface/Duranta and srsRAN/OCUDU), and two Near-Real-Time RICs (i.e., the ORAN-SC Near-RT RIC and FlexRIC). All components are deployed on an ARMv8 platform representative of the processing units used in small-satellite payloads, driving a USRP B210 software-defined radio. We compare them in terms of functional compliance (3GPP NTN features, O-RAN interfaces, multi-tenancy), resource efficiency, real-time behavior, and engineering suitability. Results show that these platforms can host a joint gNB + near-RT RIC deployment using any of the considered components, although further optimizations are still required for carrier-grade performance. However, the performance and standards compliance vary significantly among them. Building on these results, we derive a decision framework that maps mission profiles and Size, Weight, and Power (SWaP) budgets to gNB/near-RT RIC combinations. Finally, we discuss the open gaps remaining before these stacks can be flown in NTN regenerative payloads.

0.27

Toward Lightweight Aerial 5G gNBs: Reproducible OAI Testbed on Commodity ARM Platforms

cs.CR eess.SP ·2026-10-04 ·Marc Duboc, Ammar El Falou
similarity 0.68
Abstract

For a battery-powered UAV base station, every gram and watt devoted to RAN-compute competes with flight-duration margin. We therefore keep the 5G Core (5GC) and central unit (CU) on the ground and design the airborne unit around only the backhaul endpoint, distributed unit (DU), and radio. The key question is then a practical one: can widely available commodity ARM computers sustain a real radio OpenAirInterface (OAI) 5G DU with useful performance over heterogeneous F1? We answer it with Raspberry Pi~5 and Jetson Orin Nano as DUs, a USRP B210, a commercial handset, and Ethernet, Wi-Fi/GRE, and 5G/WireGuard backhaul. Jetson preserves 88.4% of x86 split-DU Ethernet DL throughput and 87.5-89.0% across all three bearers; 5G/WireGuard preserves 76.4-77.1% of each host's wired DL rate. The validated Jetson/B210/RM500Q-GL electronics weigh 657.4 g and draw about 28 W under sustained traffic (757.4 g with integration allowance). A controlled link adaptation intervention raises split DL from 23.4 to 99.4 Mb/s as the dominant Modulation and Coding Scheme (MCS) moves from 3 to 26. Finally, synchronized radio, F1-U, CPU, and UHD evidence narrows the remaining monolithic-split gap to split-path scheduling/timing behavior. Beyond performance, this capability serves the emergency-response use case that motivates the aerial cell: once deployed above an affected area, it can broadcast a PWS warning message. We release the OAI patch that carries the single-segment Write-Replace Warning over F1 from CU to DU, where SIB8 is scheduled to the handset. The public artifact makes the payload, performance, and emergency-broadcast baseline reproducible with laboratory-accessible hardware.

0.14

Open-source emulation-based test environment to settle O-RAN-compliant trials

cs.NI ·2026-09-16 ·Ramon Fontes, Allan Martins, Vicente Sousa, Kaio Dantas, Lucas Medeiros +9 more
published similarity 0.67
Abstract

Experimental tools are a key factor in both academic and industrial research communities to create design evaluations of new networking technologies that involve troubleshooting or changing the planning of deployed networks. Physical Software-Defined Radio (SDR) experimental platforms enable a design solution for the quick prototyping of wireless communication systems. However, SDR-based experimental platforms incur high costs, which leads to scalability limitations in the experimental settings. Having said this, network simulators, emulators, and new testbeds have attracted increasing attention. Emulation-based research prototyping can be distinguished from real communication networks and SDR-based platforms by allowing a tradeoff between cost and flexibility. This paper examines the Mininet-RAN emulation tool, which, as well as Radio Access Network (RAN) modeling, provides a way to test Open RAN Intelligent Controller (RIC) services without the need to deploy an entire RAN infrastructure. The Mininet-RAN creates virtual network elements, such as hosts, L2/L3 devices, controllers, and links, by combining some of the best emulator features, hardware testbeds, and simulators. By running the current code of standard practice Unix/Linux network applications and network stack, the Mininet-RAN enables real-world network data traffic patterns to be delivered to the RIC, regarding the most significant aspect of the dynamic generation of wireless system's KPIs. We provide the basic code of Mininet-RAN for the first two O-RAN Alliance-defined use cases involving V2X and UAV. The xApps are being implemented in O-RAN SC near-RT RIC, with Mininet-RAN which provides a closed-loop validation environment.

0.49

ONDT: A Modular and Virtualized O-RAN Digital Twin for xApp/rApp Closed-Loop Experimentatio

cs.NI ·2026-10-06 ·Miguel Catalan-Cid, Joan Josep Aleixendri, August Betzler, George Oikonomou, Lydia Ntzogani +1 more
published similarity 0.67
Abstract

Open Radio Access Network (O-RAN) architectures extend programmability in next-generation cellular networks through Near-Real-Time and Non-Real-Time RAN Intelligent Controllers (RICs), enabling AI/ML-driven xApps and rApps to optimize network behavior dynamically. However, validating automated closed-loop control algorithms in live environments presents significant operational risks and deployment costs. To address this challenge, this paper introduces the O-RAN Digital Twin (ONDT), a modular, virtualized, and cloud-native experimentation framework developed as a 6G enabler within the SNS SUNRISE-6G project. We present the ONDT architecture and its end-to-end experimentation workflows, showing how the framework automates O-RAN-compliant rApp/xApp onboarding, RAN scenario configuration and initialization, Key Performance Metric (KPM) collection, and closed-loop control validation. Experimental validation using Juniper RIC platforms and the Keysight RICtest emulation framework demonstrates ONDT ability to provide an isolated and reproducible environment for KPM monitoring, cell ON/OFF control, automated dataset generation, and rApp/xApp validation.

0.35

PRO-RAN: Processor-Level Characterization of Open RAN Centralized and Distributed Units

cs.NI cs.PF ·2026-08-27 ·Moojan Kamalzadeh, Larry Horner, Linqi Xiao, Abhishek Bhattacharyya, Ehsan Bahaloo Horeh +3 more
hot direction similarity 0.66
Abstract · 7 pages, 6 figures

Open Radio Access Network (O-RAN) disaggregates RAN protocol functions and enables Centralized Unit (CU) and Distributed Unit (DU) software to execute on general-purpose computing platforms. Different CU and DU protocol responsibilities produce different processor workloads and execution paths. Conventional performance metrics, including CPU utilization and throughput, quantify aggregate resource usage without identifying function-level execution costs or processor microarchitectural bottlenecks. Processor-level characterization, on the other hand, provides insights into resource provisioning, function placement, software optimization, and hardware acceleration. The paper describes a controlled characterization framework that evaluates independently deployed CU and DU functions under matched hardware and traffic conditions. The experimental platform integrates the Linux Foundation OCUDU implementation with an emulated User Equipment, a ZeroMQ-based radio interface, and an Open5GS core. Automated validation confirms registration and bidirectional packet delivery before process-scoped Intel VTune Hotspots and Top-Down Microarchitecture Analysis. Under traffic load, accumulated process CPU time increases from 17.3 s to 37.4 s for the CU and from 462.0 s to 628.4 s for the DU during equal 300-s profiling intervals. The measurements identify distinct CU and DU execution characteristics and motivate function-specific processor analysis and optimization.

0.28

ReDrone5G: Field Trial Evaluation of Remote UAV Media and Control over Public and Private 5G Networks

cs.NI ·2026-11-04 ·Kashif Mehmood, Tu Dac Ho, Katina Kralevska, Hacı Mehmet Güzey
similarity 0.65
Abstract

Drone-assisted live media production stresses cellular networks by combining high-rate uplink video, continuous telemetry, and latency-sensitive command/control on a mobile aerial platform. This paper presents ReDrone5G, an end-to-end field-trial platform evaluated across two practical fifth-generation (5G) deployment paths: a commercial public non-standalone (NSA) network in Sivas, Turkiye, and a private OpenAirInterface (OAI)-based standalone (SA) testbed in Trondheim, Norway. The same drone, media, telemetry/control, and monitoring stack is used in both trials, which are treated as complementary, non- equivalent field deployments rather than a controlled A/B comparison. Results show that the commercial deployment sustains remote drone media operation, while the evaluated private deployment exhibits lower control RTT and video latency and higher video throughput. The private setup also exposes signal-to-noise ratio (SNR), reference signal received power (RSRP), modulation and coding scheme (MCS), physical resource block (PRB), and block error rate (BLER), providing cross-layer radio/network context. ReDrone5G shows that public 5G is useful for feasibility validation, while private 5G enables repeatable experimentation, tuning, and future service assurance for drone-media workflows.

0.19

SL-RFSIM: Enabling Scalable Multi-Hop 5G NR Sidelink Mesh Networking in OpenAirInterface

cs.NI ·2026-10-01 ·Simone Pio Candido, Jin Yan, Jérôme Härri
code/data similarity 0.62
Abstract

Recent 3GPP releases have extended 5G New Radio (NR) Sidelink (SL) to support device-to-device (D2D) relay and multi-hop capabilities. This paper presents SL-RFSIM, a component-based experimentation framework extending OpenAirInterface (OAI) with scalable multi-hop NR SL capabilities. SL-RFSIM replaces the legacy OAI RF simulator with a broker-based publish/subscribe architecture enabling arbitrary peer-to-peer connectivity while preserving compatibility with the OAI protocol stack. The framework further integrates pluggable mobility, propagation, reception, and monitoring services, and supports Layer-2 mesh networking through BATMAN-adv. Experimental evaluation on the SLICES-RI research infrastructure validates the proposed architecture through representative mesh networking scenarios and identifies the current software bottlenecks limiting scalability. SL-RFSIM provides an open-source foundation for reproducible experimental research on 5G NR SL and future multi-hop cellular mesh networks.

0.28