CS Paper Radar

SL-RFSIM: Enabling Scalable Multi-Hop 5G NR Sidelink Mesh Networking in OpenAirInterface

Simone Pio Candido, Jin Yan, Jérôme Härri

cs.NI ·submitted 2026-10-01 13:02 UTC · v1
code/data

Abstract

Recent 3GPP releases have extended 5G New Radio (NR) Sidelink (SL) to support device-to-device (D2D) relay and multi-hop capabilities. This paper presents SL-RFSIM, a component-based experimentation framework extending OpenAirInterface (OAI) with scalable multi-hop NR SL capabilities. SL-RFSIM replaces the legacy OAI RF simulator with a broker-based publish/subscribe architecture enabling arbitrary peer-to-peer connectivity while preserving compatibility with the OAI protocol stack. The framework further integrates pluggable mobility, propagation, reception, and monitoring services, and supports Layer-2 mesh networking through BATMAN-adv. Experimental evaluation on the SLICES-RI research infrastructure validates the proposed architecture through representative mesh networking scenarios and identifies the current software bottlenecks limiting scalability. SL-RFSIM provides an open-source foundation for reproducible experimental research on 5G NR SL and future multi-hop cellular mesh networks.

Closest papers

Nearest neighbours by meaning across the whole index.

Virtualized 5G Tesbed using OpenAirInterface: Tutorial and Benchmarking Tests

cs.NI ·2026-09-11 ·M. Dória, V. Sousa, A. Campos, N. Oliveira, P. Eduardo +7 more
publishedbenchmarkhighly cited similarity 0.66
Abstract

The development of 5G and its evolutionary path to 6G brings virtualization as close as possible to the antennas. Native 3GPP systems are now software running at servers boosted by accelerator cards to cope with computationally intense signal processing. Meanwhile, the Radio Frequency (RF) front-end is still proprietary hardware, sheltering specific PHY-layer procedures like passband amplification/modulation. This approach takes advantage of the software's flexibility while keeping the complex microsecond signal processing performance from modern telecommunication systems. This paper provides tutorial material on the Core Network and Radio Access Network of OpenAirInterface (OAI) 5G stack on top of Universal Software Radio Peripheral (USRP) platforms. A set of blueprints showcases OAI's ability to provide a virtualized 5G network with different transmission capabilities and the possibility to use it with commercial mobile phones. Configuration discussions and throughput benchmark analyses follow installation and deployment instructions. Our results show that 5G prototyping using OAI and USRP frontends can lead to good reproducibility and consistent throughput.

0.49

Integrating Wi-Fi into 3GPP 5G Network Slicing: An Experimental Prototype Study

cs.NI ·2026-09-02 ·Nelson Ion de Oliveira, Marília Costa Muniz, William M. C. do Nascimento, João Pedro Brasil, Victor Farias Monteiro +3 more
publishedcode/data similarity 0.63
Abstract

Network Slicing (NS) is a fundamental pillar of 5G and beyond networks, enabling the provisioning of isolated, logical networks tailored to specific Quality of Service (QoS) requirements. While 3GPP standards comprehensively define slicing architectures over cellular access networks, the seamless integration of Non-3GPP technologies such as Wi-Fi into a unified slice instance remains an active area of investigation, particularly regarding empirical validation. This paper presents an end-to-end prototyping study that integrates 5G Standalone (SA) and Wi-Fi networks by adapting the Trusted Non-3GPP Gateway Function (TNGF) to extend NS to WLAN networks, enabling the unified management of Wi-Fi transmission resources. We implement a functional testbed leveraging an open-source 5G Core and an explicit Non-3GPP access to validate multi-Radio Access Technology (multi-RAT) slice operation. Our empirical results showcase the dynamic viability of multi-RAT slicing under varying bandwidth allocations and traffic steering policies, providing a concrete proof of concept for unified 3GPP and Non-3GPP service delivery.

0.38

Open-Source 5G RAN Platforms: A Dual Perspective on Performance and Capabilities

cs.NI ·2026-08-26 ·Maria Katarine Santana Barbosa, Iasmin Gomes, Vinícius Melo, Kelvin Lopes Dias
code/data similarity 0.62
Abstract · This paper has been published in IEEE WCPNS 2025

Open-source implementations of the fifth generation (5G) Radio Access Network (RAN), such as OpenAirInterface (OAI) and srsRAN, have become increasingly relevant for industry and academic research, rapid prototyping, and low-cost private 5G deployments. The state of the art presents different evaluation scenarios for both platforms; however, these are often limited to individual testbed evaluations, end-to-end studies, or partial comparisons between them. In particular, there is a lack of evaluations considering different Software-Defined Radios (SDRs), RAN configurations, user applications, and numbers of real UEs. To address this gap, this paper presents a comparative evaluation of OAI and srsRAN. The study includes a qualitative assessment of supported features and deployment flexibility, followed by a quantitative performance analysis covering radio resource control setup procedures, compliance with theoretical data rates, and real application workloads with diverse quality of service requirements. Specifically, we consider Video on Demand (VoD) for data rate evaluation, Live Streaming (LS) and Cloud Gaming (CG) as latency-sensitive applications. These workloads provide a comprehensive view of each platform capability.

0.63

ONDT: A Modular and Virtualized O-RAN Digital Twin for xApp/rApp Closed-Loop Experimentatio

cs.NI ·2026-10-06 ·Miguel Catalan-Cid, Joan Josep Aleixendri, August Betzler, George Oikonomou, Lydia Ntzogani +1 more
published similarity 0.57
Abstract

Open Radio Access Network (O-RAN) architectures extend programmability in next-generation cellular networks through Near-Real-Time and Non-Real-Time RAN Intelligent Controllers (RICs), enabling AI/ML-driven xApps and rApps to optimize network behavior dynamically. However, validating automated closed-loop control algorithms in live environments presents significant operational risks and deployment costs. To address this challenge, this paper introduces the O-RAN Digital Twin (ONDT), a modular, virtualized, and cloud-native experimentation framework developed as a 6G enabler within the SNS SUNRISE-6G project. We present the ONDT architecture and its end-to-end experimentation workflows, showing how the framework automates O-RAN-compliant rApp/xApp onboarding, RAN scenario configuration and initialization, Key Performance Metric (KPM) collection, and closed-loop control validation. Experimental validation using Juniper RIC platforms and the Keysight RICtest emulation framework demonstrates ONDT ability to provide an isolated and reproducible environment for KPM monitoring, cell ON/OFF control, automated dataset generation, and rApp/xApp validation.

0.35

ISAC in 3GPP: Evolution Toward 6G

cs.NI cs.IT ·2026-08-15 ·Neeraj Varshney
similarity 0.56
Abstract · submitted for possible publication in IEEE Journal

Integrated sensing and communication (ISAC) is emerging as an important direction in the Third Generation Partnership Project (3GPP) evolution toward 6G because it allows cellular networks to provide environmental awareness in addition to connectivity. This paper surveys the current 3GPP trajectory from Release~19 feasibility studies to Release~20 radio, protocol, and architecture studies, while distinguishing established requirements, ongoing study assumptions, and possible forward directions. The survey covers service requirements, sensing topologies, channel model evolution beyond 3GPP Technical Report (TR)~38.901, Radio Access Network Working Group~1 (RAN1) physical layer design, Radio Access Network Working Groups~2 and~3 (RAN2 and RAN3) system implications, and the role of sensing-assisted communication. It also synthesizes the main unresolved issues in waveform and reference signal design, multi-node coordination, sensing data reporting, service exposure, privacy, and implementation constraints. By connecting service-level motivations to physical layer, protocol, and architecture implications, the paper provides a standards-centric reading of how 3GPP may evolve toward practical 6G ISAC support.

0.36

OpenRIS: Democratizing reconfigurable intelligent surfaces for real-world wireless enhancements

eess.SP ·2026-08-10 ·Weicong Chen, Junjie Ai, Lin Bai, Xiaokun Teng, Wen Jun Teng +5 more
code/data similarity 0.56
Abstract · This manuscript has been submitted for possible publication

Wireless enhancement is critical for next-generation mobile communication systems to realize seamless connectivity, yet traditional network expansion strategies are becoming economically unsustainable. Reconfigurable intelligent surfaces (RISs) provide a promising alternative by improving signal utilization. However, high hardware and deployment costs of advanced RISs limit their large-scale application. Here, we democratize this technology with OpenRIS, an open-source and low-cost platform composed of Lego-like meta-bricks. With digital-twin assistance, these meta-bricks can be flexibly assembled into arbitrary shapes to achieve customized, mass-deployable wireless enhancement without extra power. Experiments and full-wave simulations verify that the discretized OpenRIS achieves consistent performance with the continuous RIS. We further develop a dual-user wireless transmission system and a three-dimensional coverage measurement system to showcase the versatile applicability of OpenRIS in wireless enhancements. As a plug-and-play solution, OpenRIS accelerates the translation of RIS theory into practice and is poised to integrate into infrastructure, reshaping the future wireless world as steel and concrete shape modern cities.

0.20

High-Altitude Platforms Beyond Connectivity: A Survey of Integrated Sensing, Storage, Communication, Computing, and Intelligence

eess.SY ·2026-08-19 ·Haoxiang Luo, Mohamed-Slim Alouini
survey similarity 0.56
Abstract

High-altitude platforms (HAPs) are emerging as persistent middle-layer infrastructures for space-air-ground integrated networks (SAGINs), offering a favorable compromise among coverage, latency, endurance, and deployment flexibility. Their role, however, is evolving beyond communication relaying toward the joint provision of sensing, storage, communication, computing, and intelligence (S^2C^2I). This survey presents a unified HAP-centric perspective on S^2C^2I integration. We first review HAP fundamentals, platform categories, and their principal roles in SAGINs, including wide-area access, relaying, backhaul, edge service, low-altitude aerial coordination, and cross-layer orchestration. We then develop an integrated architecture spanning multi-plane connectivity, payload functional splits, and a cloud-edge-HAP space continuum with hierarchical data, control, computing, and storage loops. The enabling technologies are systematically examined, covering heterogeneous RF, millimeter-wave, terahertz, free-space optical, and hybrid links; sensing payloads and integrated sensing and communication; onboard computing; storage and caching; and AI-based orchestration. We further synthesize standardization progress, open software and datasets, testbeds, field evidence, and a four-level evaluation methodology ranging from component validation to mission-level effectiveness. An emergency-response case study demonstrates that joint S^2C^2I orchestration substantially improves conjunctive service availability while reducing feeder-link traffic. Finally, we identify research opportunities in agentic AI, trustworthy autonomy, goal-oriented semantic operation and digital twins, and sustainable, certifiable, and open HAP-native systems. The resulting synthesis provides a coherent roadmap from platform design to network-wide deployment.

0.44

RIS-Enabled Integrated Access and Relay: Empowering Collaboration Among BSs

cs.NI ·2026-09-22 ·Hao Lin, Mustafa A. Kishk, Mohamed-Slim Alouini
published similarity 0.56
Abstract · 7 pages, 5 figures, 1 table, IEEE Internet of Things Magazine

The increasing number of Internet of Things (IoT) devices and applications leads to severe access congestion in conventional base station (BS) networks. Meanwhile, the low transmit power of IoT devices requires larger diversity gains from the system design. Therefore, low-cost traffic management and signal enhancement mechanisms become essential. Reconfigurable intelligent surfaces (RISs) are increasingly significant due to their flexibility and efficiency. Using reflection, refraction, and amplification, RISs can act as innovative relay nodes to overcome spatial limitations caused by blockages, and improve the coverage range of existing infrastructure. However, more extensive applications of RISs remain to be explored. In this paper, we propose to deploy co-sited RISs on BSs and use the integrated access and relay (IAR) architecture to enable wave-domain task-offloading between BSs, without requiring extra infrastructure or incurring extra decoding latency. Considering the fixed and dynamic sub-carrier schemes, we show the performance improvement in cell-free networks and cellular networks. In addition, we investigate the effect of RIS elements allocated to each IoT device in both cell-free and cellular networks. Finally, we discuss the opportunities and challenges of IAR BSs for future communications design.

0.44