CS Paper Radar

Fusion Based Dynamic Platform Magnetic Compensation Beyond the Tolles Lawson Approach

Rong Yang, Yaakov Bar-Shalom

eess.SY ·submitted 2026-08-27 02:01 UTC · v1

Abstract

Aeromagnetic compensation for airborne platforms is essential for real-time tracking of the dynamic external magnetic field free from platform interference, enabling robust magnetic navigation (MagNav), magnetic anomaly detection (MAD), and other geophysics applications. While the classical Tolles-Lawson (TL) framework focuses extensively on estimating compensation model parameters, it pays less attention to the real-time estimation of the dynamic external magnetic field. To bridge this gap, this paper proposes a two-stage calibration and compensation framework. First, an augmented linearized model is developed for sensor-based calibration parameter estimation, avoiding the information loss inherent in classical band-pass filtering (BPF). Second, utilizing these pre-estimated parameters, a map-less Kalman Filter Fusion (KFF) algorithm is developed to dynamically estimate the external field and compensate the platform interference directly from multi-sensor measurements corrupted by platform interference. The second step enables real-time joint dynamic estimation and multi-sensor compensation without requiring reference position data (which runs counter to the MagNav purpose) or prior anomaly maps. Validated on the public DAF-MIT MagNav dataset, the framework overcomes the non-causal limitations of existing approaches, reducing average compensation error from 359.2~nT to 12.3~nT while maintaining exceptional robustness against heavily corrupted sensor channels.

Comment
16 pages, 10 figures, submitted to Journal of Advances in Information Fusion (JAIF) on 3rd Aug 2026

Closest papers

Nearest neighbours by meaning across the whole index.

A Tightly Coupled Magnetic-Inertial SLAM System for Field Robots

cs.RO eess.SP ·2026-11-02 ·Chuan Huang, Tongxing Peng
similarity 0.64
Abstract

Field robots operating in mines, tunnels, and disaster areas require reliable localization despite GNSS denial and degraded camera and LiDAR measurements caused by dust, smoke, or poor illumination. Missions involving both ground and aerial robots further motivate complementary sensing modalities that do not depend on visibility, preinstalled infrastructure, or wheel contact. This letter presents MISLAM, a tightly coupled magnetic-inertial simultaneous localization and mapping system using an IMU and a nine-magnetometer array, without relying on external odometry or platform-specific motion assumptions. The system combines the inertial navigation model with local polynomial magnetic-field models for short-term motion estimation and a global Gaussian process model for drift correction using an error-state Kalman filter. Offline evaluation on three indoor datasets collected with a handheld rig shows reductions in total endpoint closure error of 45.7% - 78.0% relative to magnetic-inertial odometry. Under poor illumination, MISLAM maintains tracking after visual-inertial odometry fails, achieving a horizontal closure error of 0.332 m, although vertical drift remains a limitation. These results support magnetic-inertial SLAM as a complementary localization modality for robotic sensor suites operating under degraded visual conditions.

0.16

Can An Array of Magnetometers Replace a DVL - A Cramér-Rao Bound Analysis

eess.SP ·2026-10-22 ·Ludvig Lindström, Isaac Skog, Magnus Lundberg Nordenvaad, Andreas Gällström
similarity 0.62
Abstract · Submitted to IEEE Journal of Ocean Engineering, 9 pages, 5 figures

Underwater vehicles rely on noisy dead-reckoning systems, such as Doppler velocity log (DVL)-aided inertial navigation systems, for positioning. However, DVLs rely on active acoustic measurements and are thus unsuitable for covert operations. Magnetic velocity estimation using a magnetic sensor array is a potential silent alternative. In outdoor environments, spatial variations in magnetic field magnitude are small, whereas temporal variations are large, making the achievable velocity-estimation accuracy uncertain. In this paper, Cramér-Rao lower bounds (CRLBs) are derived for magnetic velocity estimation using different sensor configurations and measurement models in one dimension, ignoring platform disturbances, to quantify the potential accuracy of magnetic sensor arrays. The analysis suggests that, when spatial variations are sufficient and temporal variations can be corrected using correction data, the resulting CRLB is comparable to that of an export-controlled DVL. If, instead, temporal variations are not corrected, the sensor noise must be reduced by around two orders of magnitude for the CRLB to reach the accuracy of an export-controlled DVL. Therefore, the results indicate that current magnetic sensor arrays may complement, rather than replace, DVLs in inertial navigation systems.

0.26

Optimal Trajectory Generation for Improved Magnetic Navigation

eess.SY math.OC ·2026-09-23 ·Justin Kang, Teddy Herrera, Liraz Mudrik, Sean Kragelund, Alfonso Sciacchitano +1 more
theory similarity 0.59
Abstract · 11 pages, 9 figures

Magnetic navigation has emerged as a promising alternative for navigation in Global Positioning System (GPS)-denied environments, leveraging geomagnetic field maps in conjunction with onboard magnetometer measurements. However, its performance is highly sensitive to trajectory-dependent observability, which limits its practical effectiveness under conventional flight paths. This paper proposes an optimal trajectory design framework for magnetic navigation that maximizes information content along the flight path. The trajectory generation problem is formulated as an optimal control problem that minimizes the posterior Cramér--Rao lower bound on the position estimation error, subject to a penalty on path length. The resulting trajectories are non-intuitive and significantly enhance the observability of the navigation system. Simulation results demonstrate that the proposed optimal trajectories yield substantial reductions in estimation error compared to conventional straight-line trajectories, highlighting the critical role of trajectory design in enabling high-accuracy magnetic navigation. These findings suggest that trajectory optimization can substantially improve the viability of magnetic navigation as a robust alternative for aerospace applications in GPS-denied environments.

0.26

AMISS: An Integrity Framework for Magnetic Navigation

eess.SY ·2026-11-18 ·Sharad C. Shankar, Prasenjit Sengupta, J. Scott Clawson, Sam Pullen
similarity 0.58
Abstract · Submitted to the IEEE Transactions on Aerospace and Electronic Systems

Magnetic Navigation (MagNav) is a promising alternative to traditional systems like Global Navigation Satellite Systems (GNSS), offering resistance to jamming or spoofing attacks to which the latter are vulnerable. MagNav matches scalar magnetic measurements over time against a known map of Earth's magnetic anomaly in order to position a vehicle. MagNav is therefore sensitive to the quality of these maps, especially to errors in the survey data that the maps are derived from. In order to be a reliable and mature navigation technology, MagNav must satisfy integrity requirements for mitigation of such faults. To this end, a solution-separation monitoring algorithm is developed that performs a role equivalent to Advanced Receiver Autonomous Integrity Monitoring (ARAIM) in GNSS, which detects faults as well as generates worst-case bounds (protection levels) on estimation error for faults too small to be detected. It is shown how these integrity methods can be developed in a \emph{windowed-in-time} sense, where subsets of measurements over a time window are compared with each other in order to detect outliers that can potentially result from errors in the map. The applicability of the approach is demonstrated using results obtained using synthetic aircraft data with injected faults.

0.25

The Setting of IMU Parameters in Kalman Filtering-based Information Fusion

cs.RO eess.SY ·2026-08-17 ·Qiang Hu, Yanhua Zou, Shuaiyi Huo, Haibo Ge, Wei Ouyang
similarity 0.57
Abstract · 2026 International Conference on Guidance, Navigation and Control

The setting or tuning of specifications for the inertial measurement unit (IMU) is tricky in sensor fusion. The underneath conundrum is caused by the fact that the working condition of IMU is more complex than the stationary calibration scenario. Since the noises and biases instabilities calibrated under static condition cannot accommodate other cases, the effective tuning of IMU parameters largely hinges on the experience or profound understanding of the system. In the current work, the setting method of IMU parameters based on Allan variance calibration is delved into within the Kalman filtering framework. Specifically, the relationship between the power sepctral density and Allan variance is leveraged in formulating the process uncertainty in continuous-time filtering. Three typical IMU-based sensor fusion systems, including INS/GNSS integration, LiDAR-inertial odometry, and visual-inertial odometry are considered to show the feasibility and effectiveness of this parameter setting process.

0.23

FlightMagNav: An Open Dataset and Probabilistic Map Learning and Validation Framework for Outdoor Magnetic Field-Based Positioning

eess.SP cs.RO ·2026-10-06 ·Isaac Skog, Miguel Ramos Galrinho, Martin Gelin
similarity 0.57
Abstract

Magnetic field-based positioning is a resilient positioning technology that requires no external infrastructure and is hard to jam at scale. To facilitate research on magnetic field-based positioning for aerial platforms operating close to the Earth's surface, an open dataset is presented with measurements collected using an unmanned aerial vehicle carrying two optically pumped magnetometers, a type of quantum magnetometer, and a global navigation satellite system-aided inertial navigation system. The dataset includes measurements for both magnetic-field map learning and validation. Along with the dataset, a probabilistic framework for magnetic-field map learning and validation is presented and used to illustrate how the dataset may be used. Finally, we outline research directions that may be explored using the dataset.

0.22

Accuracy Evaluation of INS/ZUPT Filtering Methods Based on Different Geometric Error Definitions

cs.RO ·2026-09-25 ·Wei Ouyang, Jiale Han, Yarong Luo, Maoran Zhu
similarity 0.57
Abstract

Geometric filters have recently been introduced to improve the accuracy and consistency of inertial-based integrated navigation systems. Error states were defined through specific group operations, introducing state correlations in error definition, which were lacked in the additive error used by a conventional indirect Kalman filter. The desirable consistent filtering models can be obtained based on specific geometric errors. For zero-velocity measurements expressed in the reference frame, this paper derives left-error process and measurement models from invariant filtering, two-frame-group filtering, and equivariant filtering. Importantly, a new group operation is introduced for the left tangent-group equivariant error. The analysis shows that the two-frame-group invariant extended Kalman filter (TFG-IEKF) and the tangent-group equivariant filter (TG-EqF) do not offer a significant consistency advantage over the invariant extended Kalman filter (IEKF). Experiments with an INS/ZUPT measurement system show that, under small initial attitude errors, the conventional indirect extended Kalman filter (EKF) achieves loop-closure position errors below $0.1\%$ of the traveled distance, while the three geometric filters achieve comparable positioning accuracy.

0.13

Calibration-free IMU-based Relative Orientation Estimation under Dynamic Human Motion

cs.RO eess.SY ·2026-10-22 ·Ruiyuan Li, Hassan Osman, Ajay Seth, Manon Kok
similarity 0.55
Abstract · 8 pages, 7 figures, 1 table. Submitted to IEEE Sensors Journal

Recent magnetometer-free inertial measurement unit (IMU) methods can reduce drift in joint motion estimation using rigid-body constraints, but they typically require pre-calibrated sensor locations, assumptions of specific joint models (e.g., hinge joints) or limited motion types, or an external reference for global orientation. Furthermore, challenges related to high-frequency impacts (e.g. at foot strikes during gait) and numerical differentiation of noisy measurements have not been explicitly addressed. We propose an extended Kalman filter that estimates relative IMU orientation and sensor location simultaneously, requiring neither offline sensor location calibration nor a global orientation anchor. A systematic simulation study shows that the quality of the relative orientation and the sensor location estimates depends on different motion-intensity sources: the joint center acceleration and the relative angular velocity, respectively. A low-pass filter (LPF) is used to mitigate real-signal outliers before applying the rigid-body constraint. When applied to the OpenSense dataset with real IMU measurements across four subjects with three lower-body joint types during walking and complex tasks including various motion types, the proposed method achieves an overall relative orientation error of 2.61°, compared with 10.40° for a baseline using offline-estimated sensor locations and 7.43° for a baseline using marker-derived sensor locations. These results show that the proposed calibration-free estimation framework handles real IMU data effectively and achieves accurate relative orientation without offline sensor location calibration.

0.16