CS Paper Radar

STREAM: An Objective-Driven and Uncertainty-Aware Framework for Industrial Energy Data Acquisition

Zhipeng Ma, Bo Nørregaard Jørgensen, Zheng Grace Ma

cs.IR ·submitted 2026-08-27 07:50 UTC · v1
publishedunusual

Abstract

Industrial energy management requires datasets that connect energy use with equipment states, production batches, material flows, and process conditions. However, conventional acquisition workflows commonly emphasize connectivity and storage without verifying whether accessible signals satisfy the requirements of a defined energy-performance assessment. This paper presents STREAM, an objective-driven and uncertainty-aware framework comprising Specification of Objectives, Technical Requirements, Resource Mapping, Extraction from Sources, Archival Metadata, and Migration to Database. STREAM is the central workflow: objective-to-data traceability is its end-to-end output, while measurement, temporal, contextual, and processing uncertainty are assessed across all six stages. Compared with the original conceptual STREAM sequence, this paper adds stage-level artifacts, minimum-evidence gates, source-suitability rules, a metadata template, an uncertainty rubric, and case-specific traceability matrices. The framework is validated through two industrial batch-process cases: induction-furnace melting in a foundry and cheese-powder drying using SCADA and production-order data. The results demonstrate that data accessibility is not equivalent to analytical suitability and show how STREAM supports transparent decisions about immediate data use, analytical restrictions, and prioritized infrastructure improvements.

Comment
It has been accepted by Energy Informatics.Academy Conference 2026 (EI.A 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

UnespDataLens-RM: A Reference Model for Analytical Data Engineering with Governance, Quality, Provenance, and Reproducibility

cs.DB ·2026-09-08 ·Ronaldo Celso Messias Correia, Douglas Francisquini Toledo, Camila Tolin Santos da Silva
similarity 0.62
Abstract

The growing reliance on data in analytical processes and evidence-based decision-making has reinforced the importance of Data Engineering in building pipelines capable of integrating, transforming, validating, and delivering data from heterogeneous sources. However, the reliability of analytical assets depends not only on data processing capabilities but also on mechanisms for governance, quality assurance, provenance, traceability, versioning, and reproducibility throughout their lifecycle. These responsibilities are commonly addressed by different models, frameworks, and operational practices, resulting in methodological fragmentation across the analytical data lifecycle. To address this gap, this article proposes UnespDataLens-RM, a technology-independent reference model that integrates technical-operational processes and cross-cutting capabilities within a unified structure for Analytical Data Engineering. The model aims to support the specification, organization, and evolution of analytical pipelines by incorporating governance, quality, provenance, traceability, and reproducibility from the design stage. Developed following the Design Science Research approach, UnespDataLens-RM comprises eight technical-operational modules, eight cross-cutting modules, complementary dimensions, and a formalized set of artifacts, metrics, and validation criteria. The resulting specification offers a conceptual and methodological framework for future instantiations and empirical evaluations of analytical pipelines designed to be more governable, documented, traceable, auditable, and reproducible.

0.29

Technology-Enabled Fuel Supply Chain Resilience: An Integrated Information System for Real-Time Monitoring and Decision Support

cs.SE ·2026-11-19 ·Mohamed Loutis, Esma Aïmeur
similarity 0.56
Abstract

This study evaluates and extends the transactional information system described in an earlier fuel logistics study, focusing on data reliability, monitoring, and decision support. An author-led re-evaluation examined available Delphi and SQL code and compared a reconstructed source-derived baseline (R0) with a revised SQL Server system (R1) across twelve evaluation scenarios. Synthetic transactions and public US energy data were used for technical assessment, while organizational processes and supply delays were simulated. R1 improved data integration and reporting accuracy in controlled SQL Server tests and introduced stock-movement records, automated alerts, and recovery controls. On comparable data feeds, integration defect rates decreased from 2.90 to 3.46 percent in R0 to 0.14 to 0.49 percent in R1. For national weekly demand forecasting, selected methods did not significantly outperform the previous-year mean. Process and disruption simulations suggested improvements in manual workload and replenishment delays, although these outcomes depended on modelling assumptions and were not observed in operational settings. The study presents a revised transactional architecture for fuel logistics and distinguishes experimentally measured information-system performance from simulated organizational outcomes. Its findings highlight the potential of traceable inventory records, early exception detection, and recoverable information systems to support supply chain resilience.

0.31

Artificial Intelligence for Energy Optimization in Data Centers

cs.AI cs.LG ·2026-09-03 ·Mohammed Basharath Ullah, Summaiya Unnisa Begum, Mohammed Nadeem Ullah
code/data similarity 0.54
Abstract · 11 pages, 6 figures, 7 tables

Data centers are increasingly optimized by artificial intelligence and, at the same time, increasingly loaded by it. The literature treats these as two unrelated problems: control studies model workload as an exogenous arrival process, while sustainability studies model infrastructure as a fixed multiplier. We screen roughly 194 papers retrieved through a documented protocol, code 63 of them, and report what the coding shows. Of 28 primary control-oriented studies, 18 are validated in simulation alone and 5 reach physical hardware or a production facility; none account for water withdrawal, and none account for embodied carbon. Reported savings intervals across four technique families overlap almost completely, which means the field cannot presently rank its own methods. Ten recurring gaps are scored for consequence and tractability, and we set out CLEAR-DC, a framework coupling a control-policy branch to a workload-demand branch through an explicit elasticity term, reads out net rather than direct benefit, and emits a schema-conformant record covering energy, carbon, water, embodied share and validation venue. The framework is an architectural and methodological proposal, not a trained system; the contribution we defend empirically is the corpus analysis and the reporting schema derived from it. Coding sheet, derived statistics and all result artifacts: https://github.com/Kimalice/AI-for-Energy-Optimization-in-Data-Centers-Closing-the-Optimizer-Load-Loop

0.45

Value-level data provenance in an electronic laboratory notebook used by humans and language-model agents: An experience report

cs.SE physics.app-ph ·2026-10-20 ·Oleksiy V. Penkov, Boyang Shen
similarity 0.53
Abstract

A published laboratory number can be verified only when its raw file and extraction method are known. This paper presents the value-level provenance architecture of APS ELN, an electronic laboratory notebook used by both researchers and language-model agents. The architecture was motivated by a production audit in a materials laboratory covering projects performed over almost 5 years. Tracing eight baseline studies from sample to stored value showed that the initial ELN structure preserved the link from sample to raw file. Still, the link from raw file to stored value was lost, mainly due to human factors: manual entries carried no file reference or extractor version. To close this gap, the database design and workflow were reworked so that every stored value records its source file, the data file reader/viewer (DFR) plugin and version, any interactive analysis selection, or the server-side formula for derived quantities. An automated drift check re-runs each DFR on the stored files. In two end-to-end validation studies recorded by agents in X-ray reflectivity and tribology, all stored values retained verifiable provenance with zero drift. A comparison with five other platforms shows that none binds individual stored numbers to both their source files and extractor versions.

0.21

A Synthetic Benchmark for Target-Centric Causal Discovery in Industrial Processes

cs.LG cs.AI ·2026-11-12 ·Angelo Ziletti
benchmark similarity 0.52
Abstract

Causal discovery promises to find which recorded variables drive a process target such as product quality, yield or energy use. Process data with known causes are rare, and in existing benchmarks the difficulty of identifying the causes of a target is either fixed by the recorded data or set for the whole graph. We present a synthetic benchmark for target-centric causal discovery in industrial processes. Its generator is a two-level structural causal model inspired by batch production, assembled from components that each model one phenomenon of process data, such as a control loop or a delayed effect. The graph is built around the target: without sensor error, every non-cause can be distinguished from the direct causes by conditioning on them or by time order. Each component is set independently, so the difficulty can be varied one condition at a time. We evaluate eight methods, from association measures to effect estimation, with an error analysis by the role of the selected candidate; all degrade as the difficulties combine, each in a way consistent with its assumptions.

0.14

Separating Engineering Reasoning from DEXPI Serialization in LLM-Based Greenfield Surface-Process Design: A Three-Case Study for Underground Gas Storage

cs.SE cs.AI ·2026-09-11 ·Qingchuan Zhu, Shuyue Tong, Pengju Ren
similarity 0.52
Abstract

Large language models can produce engineering descriptions and structured process representations, but standards-level serialization can substantially increase the generation burden. This diagnostic study examines whether separating engineering reasoning from Data Exchange in the Process Industry (DEXPI) serialization changes where representation and engineering failures occur in constrained greenfield surface-process design for underground gas storage. We compare Direct DEXPI generation with generation of a lightweight Engineering Intermediate Representation (IR) on three cases: single-pressure injection, withdrawal and export, and dual-pressure injection. All six conditions use one fixed model snapshot, qwen3.8-max-0902, with one completed hosted generation per condition. Direct outputs are XSD-valid in 2 of 3 cases, while all 3 Engineering IR outputs are structurally valid under a minimal validator. Direct prompt inputs contain approximately 121.8k-121.9k tokens, compared with 617-699 tokens for the Engineering IR prompts. Engineering feasibility does not uniformly favor the IR: one IR output is rejected for an explicit cooling-state contradiction. The cases also reveal two distinct Direct DEXPI failure modes: engineering inconsistency and standards-level serialization failure. The observed comparison shows that, in these evaluated method bundles, deferring DEXPI serialization substantially reduces representation burden and helps isolate serialization failure, but reducing representation burden alone does not eliminate engineering inconsistencies.

0.28

XPhysICS: Cross-Physical-Domain Threat Grounding for Industrial Control Systems Security

cs.CR cs.AI ·2026-09-25 ·Sangshin Park, Jainta Paul, Lawrence Ponce, Md Raihan Ahmed, Mu Zhang +1 more
similarity 0.51
Abstract · 35 pages, 5 figures, 12 tables; revised abstract, overview figure, method description, and appendix layout

Industrial control system attacks are usually documented in terms of the plant where they occurred: its sensors, actuators, process stages, and control logic. Yet many attacks express a more general physical pattern--such as suppressing flow, corrupting chemical dosing, or driving a vessel toward overflow--that may also matter in a different plant. The challenge is deciding when such a threat remains meaningful on a new system rather than relying on similar component names or broad semantic labels. We present XPhysICS, a methodology for grounding documented cyber-physical threats onto a specific target system. XPhysICS converts source evidence into a provenance-linked description of what is manipulated, what physical consequence is expected, and what observations the evidence calls for. Once this analyst-guided abstraction, its vocabulary and schema version, and a target contract are fixed, XPhysICS applies deterministic grounding checks. An accepted result can be represented as a validation slice that records the mapped roles, signals, dependencies, and context intended to support later evaluation. We study 83 threat abstractions across continuous-process and manufacturing sources using separate evaluation denominators. The continuous-process study evaluates 78 abstractions against target contracts spanning water treatment, water distribution, hydropower, and chemical processes. Selected cases are exercised through controlled perturbations of simulator-role signals. We also test compatibility with several analysis styles, including the released upstream GeCo implementation, and conduct a three-objective, one-target realizability study using a paper-derived search reproduction. Across these evaluated settings, the results support treating explicit target checks and traceable evidence as separate from semantic similarity alone.

0.40

Text-Informed Training Data Filtering for Enhanced Virtual Flow Meter Performance

cs.LG stat.ML ·2026-10-14 ·Kristoffer Hjelmen Nesland, Bjarne Grimstad, Antorweep Chakravorty, Dan Sui
published similarity 0.51
Abstract · 19 pages, 5 figures. Accepted at FAIEMA 2026

In sectors such as energy, aquaculture and chemical processing, the effectiveness of both mechanistic and data-driven models is frequently limited by poor-quality training data, which obscures underlying physical laws and degrades predictive accuracy. Such quality issues commonly manifest as anomalies in the dataset, ranging from sensor faults to process upsets and incorrect operator inputs. While traditional rule-based filtering can remove a subset of the anomalies, it is unable to leverage contextual information stored as unstructured text, such as engineer comments and operational logs that explain under what conditions the data was collected. We propose a text-informed data filtering method that leverages large language models (LLMs) to integrate unstructured operational data with tabular sensor data. The method consists of two steps: (1) contextual anomaly detection by reasoning over both data modalities, and (2) generation of a binary mask that is applied to filter the training dataset for model development. To investigate the potential benefit, a steady-state soft-sensor regression model, namely a virtual flow meter that estimates well flow rates, is used as the downstream evaluation target. Experiments on a synthetic oil and gas dataset show improved model performance compared to traditional rule-based filtering. Ablation studies show that textual operator comments can provide filtering-relevant signals beyond sensor data alone, with the multimodal approach reducing downstream MAPE from 7.1% to 5.4% relative to sensor-only filtering. This work demonstrates that integrating unstructured operational knowledge with sensor data through LLMs can improve data quality for industrial machine learning applications, offering a scalable alternative to manual data curation.

0.31