CS Paper Radar

Mitigating Forced Oscillations in Power Systems via Data-Enabled Predictive Control

Soraya Daabak, Verena Häberle, Gabriela Hug, Gustavo Valverde

eess.SY ·submitted 2026-08-27 11:20 UTC · v1

Abstract

Sustained forced oscillations in power systems, driven by large cyclic loads such as data centers, pose a challenge to conventional power system stabilizers (PSSs), which rely on fixed tuned parameters and limited adaptability. This paper investigates the use of Data-Enabled Predictive Control (DeePC) as a data-driven alternative for damping such oscillations. DeePC constructs control actions directly from measured trajectories without requiring an explicit system model, enabling adaptation to changing operating conditions. We evaluate the performance of DeePC on a multi-machine two-area system subject to forced oscillations and compare it against a conventional PSS. The study examines the impact of different input-output configurations and the role of representative historical data in the Hankel matrix construction. Results show that DeePC can achieve superior damping. However, its effectiveness depends critically on the quality and representativeness of the underlying dataset. These findings highlight the potential of data-driven predictive control to complement or outperform conventional stabilizers in modern power systems with evolving and uncertain dynamics.

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Model Predictive Control for Damping IBR-Induced SSOs

eess.SY ·2026-11-11 ·Fiaz Hossain, Nilanjan Ray Chaudhuri, Constantino M. Lagoa
similarity 0.63
Abstract

We propose an adaptive model predictive control (MPC) approach to damp sub-synchronous oscillations (SSOs) induced by grid-following (GFL) inverter-based resources (IBRs). Unlike traditional model predictive controller designed considering the nominal plant that may not perform well in other conditions, we use plants that alter with changing operating point. To capture the plant dynamics, we use recursive least squares (RLS) based system identification with variable forgetting factor. This approach allows us to discount past data and avoid bias caused by large transient outliers while performing system identification. We present a proof of the convergence of the model parameters in the presence of finite outliers. We propose to update the model inside the MPC optimization problem periodically after a predetermined time interval instead of each sampling instant since the operating point changes slowly in a practical power system. The MPC design allows us to directly impose constraints on control inputs so that the IBR current limits are respected. Our approach also addresses the issue of unavailability of IBR models. We show the accuracy of the system identification and the superior performance of the proposed controller on the modified IEEE $4$-machine system and the modified IEEE $68$-bus system as compared with the traditional MPC.

0.29

Model-Free Control for Residential Heating: Deployment and Simulation of Nonlinear Data-Enabled Predictive Control

eess.SY math.OC ·2026-09-18 ·Sebastian Zieglmeier, Chris Verhoek, Jaap Eising, Mathias Hudoba de Badyn
similarity 0.60
Abstract · 19 pages, 8 figures, 7 tables

Residential heating accounts for a large share of building energy use, and predictive control strategies can reduce it by anticipating rather than reacting to the room temperature alone. The usual manner of implementing predictive control, model predictive control (MPC), requires an accurate model of each individual residential unit for heating control. Obtaining this model is time-consuming to obtain manually or even impossible, and such models do not transfer across a heterogeneous building stock. Data-enabled predictive control (DeePC) removes this modeling step by designing the controller directly using measured trajectories of the system. The foundations of DeePC, however, are built on the class of deterministic linear time-invariant systems, which is an unrealistic assumption for residential heating. This work applies three recently proposed nonlinear extensions of DeePC, collectively referred to as data-driven predictive control (DPC): Select-DPC, gain-scheduling DPC, and linear parameter-varying DPC. These are compared against standard DeePC and the hysteresis controller, the industry standard in residential heating. The comparison runs over a full heating season on a calibrated digital twin of an occupied research unit, the NEST research building in Switzerland, assessed by heating energy and comfort-band violation. Moreover, gain-scheduling DPC was deployed on the real residential apartment and validated the conclusions from the simulations. Each of the DPC controllers consumes significantly less energy than the hysteresis controller, amounting to roughly $11\%$ over the season, validating the use of DPC. The nonlinear methods further outperform linear DeePC in all assessed scenarios, and we analyze the relative costs and benefits of each nonlinear method.

0.40

Robust Scenario-Based Data-Enabled Predictive Control of a Battery Energy Storage System: An Experimental Study

eess.SY math.OC ·2026-10-06 ·Sebastian Zieglmeier, Nikolas Recke, Mathias Hudoba de Badyn
similarity 0.57
Abstract · 8 pages, 5 figures

Battery energy storage systems must respect strict state-of-charge (SOC) limits to prevent overcharge and deep discharge, a task complicated by measurement noise and costly-to-model nonlinear dynamics. Data-enabled predictive control (DeePC) resolves the costly modeling issue by predicting future behavior directly from data. However, its regularization robustifies only the prediction and not the constraints. Scenario-based DeePC (Scenario-DeePC) extends DeePC with the scenario approach, building constraint robustness fully data-driven from observed prediction errors rather than an assumed disturbance distribution. This paper presents the first real-world deployment of Scenario-DeePC, on a grid-connected battery system at the NEST research facility, whose SOC estimate exhibits abrupt, irregular recalibration jumps in addition to ordinary noise. Compared to standard DeePC, Scenario-DeePC achieves comparable tracking performance with substantially fewer constraint violations. Its adaptive scenario buffer further tightens constraint handling automatically, improving robustness to unpredictable recalibration events.

0.17

Data-Driven Static Output-Feedback Control for Multi-Agent Systems

eess.SY math.OC ·2026-10-02 ·Paul Serna-Torre, Adam Sedlak, Patricia Hidalgo-Gonzalez
similarity 0.56
Abstract

This work proposes a data-driven framework that synthesizes output-feedback control for linear time-invariant multi-agent systems (MAS). We first develop two algorithms that use offline data samples of state and input trajectories to determine a Nash equilibrium (NE) for MAS. Next, we formulate a semidefinite program that, given the NE solution, computes the static output-feedback controllers for the agents in MAS. Compared to prior work, virtues of our framework include weaker controllability assumptions, the absence of online information and data-driven estimation of states. Next, we use the proposed framework to design control schemes for voltage and frequency regulation for nonlinear multi-nodal electrical networks with grid-forming and grid-following inverters. Thus, compared to prior work that implements their data-driven frameworks in small-scale numerical examples, we validate the performance of our data-driven framework in high-fidelity nonlinear models of MAS. This implementation in realistic MAS provides insights that small-scale numerical examples may fail to capture. Results show successful grid stabilization and provision of regulation services from the inverters in the grid using our proposed framework. It can attain up to 78% less overshoot and 30% faster settling time than traditional strategies such as proportional-integral control.

0.30

Time-series Foundation Models for Predictive Control: The Role of Excitation

cs.LG eess.SY ·2026-10-05 ·Mazen Amria, Jasper Hoffmann, Philipp Bordne, Anna Rothenhäusler, Lilli Frison +3 more
published similarity 0.56
Abstract · Accepted at the TS-LIMITS Workshop at NeurIPS 2026

Deploying model predictive control (MPC) requires constructing or identifying a predictive model for each target system. Time-series foundation models (TSFMs) offer an attractive option thanks to strong zero-shot forecasting capabilities across systems. However, low forecast error does not guarantee that a TSFM captures the system's response to the alternative actions considered by the controller. We study this gap using residential heat-pump control as a test bed, measuring the agreement between predicted and ground-truth effects of control interventions. Importantly, we find that TSFMs can recover the system's input-response relationship when the context contains sufficient independent control excitation. Common fine-tuning pipelines and feature smoothing reduce, but do not eliminate, the need for in-context excitation. Our results indicate that current TSFMs used for predictive control require sufficiently informative control variation in the inference context. Initial closed-loop results show promise for shorter context windows.

0.36

Forced Oscillations in Power Systems Induced by Data Centers Hosting AI Workloads

eess.SY ·2026-09-23 ·Jovan Krajacic, Georgia Pierrou, Maitraya Desai, Gabriela Hug, Gustavo Valverde
similarity 0.56
Abstract · Revised and extended version of the manuscript previously posted on TechRxiv: https://www.techrxiv.org/doi/full/10.36227/techrxiv.176127304.…

Power swings in large Data Centers (DTCs) running Artificial Intelligence (AI) workloads can excite poorly damped modes in power systems. The resulting forced oscillations can lead to flicker, equipment disconnection, or blackouts. This paper investigates the risks of such load fluctuations for different system strengths and damping conditions. Using an analytical approach based on transfer functions, we identify critical DTC locations in the power grid at which load fluctuations could induce the largest forced oscillations and further characterize the harmonic spectrum of the resulting system response. Depending on the frequency and magnitude of the DTC load fluctuations, forced oscillations can become unbounded. The underlying instabilities are classified into saddle-node bifurcations of the forced periodic response and impasse-surface encounters, using Floquet multipliers and the minimum singular value of the algebraic Jacobian. Furthermore, the impact of different duty cycles and harmonic components beyond the fundamental oscillation frequency in square-wave load profiles is analyzed. Finally, the interaction of two oscillating DTCs is investigated for different locations and forcing frequencies, considering both synchronized and unsynchronized operation. The findings can help system operators to define new regulations on the maximum load fluctuations permitted for DTC facilities at specific grid locations, without negatively affecting the stability and operation of the system.

0.56

Model Predictive Control of Wind Turbines: A Model-Oriented Review of Prediction Models, Control Objectives, and Nonlinear Aerodynamic Formulations

eess.SY math.DSmath.OC ·2026-10-22 ·Roya Khalili-Amirabadi, Mohsen Jalaeian-Farimani, Mahdi Ghane
published similarity 0.55
Abstract · Khalili-Amirabadi, R., Jalaeian-Farimani, M., & Ghane, M. (2026). Model Predictive Control of Wind Turbines: A Model-Oriented Review of Pred…

Model predictive control (MPC) has been applied to wind-turbine regulation with markedly different internal prediction models, ranging from linearized low-order turbine models to nonlinear, aeroelastic, floating, and data-driven predictors. This review organizes the literature primarily by the model propagated by the controller and treats model order, predictor representation, MPC formulation, control objective, and validation plant as separate descriptors. Primary studies show that low-order linear or piecewise-affine predictors are attractive for constrained power and speed regulation, whereas flexible drivetrain, structural, and floating models are needed when drivetrain twist, tower motion, blade loads, or platform dynamics are explicit control quantities. Nonlinear and economic MPC studies further demonstrate coordinated pitch/torque control across broad operating regions, while preview, repetitive, and data-driven formulations address wind prediction, periodic loads, and model mismatch. Particular attention is given to aerodynamic pitch dependence: variable-pitch turbine dynamics can be non-affine with respect to applied pitch, and the term NMPC alone does not prove that the original nonlinear pitch map is retained inside the optimizer. The review therefore adopts a conservative, equation-based classification for direct nonlinear applied-pitch propagation. Here, direct nonlinear applied-pitch propagation means that the applied pitch at each prediction step is evaluated inside the original nonlinear aerodynamic map, rather than replacing that dependence by a linearized, scheduled, piecewise-affine, or learned surrogate. The literature supports a remaining integration challenge at the intersection of flexible drivetrain prediction, nonlinear aerodynamic pitch treatment, explicit constraints and load objectives, and validated adaptive or learned model correction.

0.35

DeoPC: Data-Enabled Output-Feedback Predictive Control for State Regulation

eess.SY math.DS ·2026-11-19 ·Jingyuan Li, Dawei Shi, Ling Shi
similarity 0.55
Abstract · 14 pages, 4 figures

Constrained regulation of the internal state of an unknown linear system is challenging when only input-output measurements are available online. In this work, we develop a data-enabled output-feedback predictive control (DeoPC) framework for constrained state regulation using input-output data. Specifically, a data-driven state estimate is constructed from past input-output data via a subspace-based singular value decomposition. Based on this state representation, we formulate a predictive controller that directly penalizes the state and control effort while enforcing the system constraints. Under persistent excitation and initialization conditions, we establish recursive feasibility and closed-loop stability of DeoPC in both noise-free and bounded-noise settings. In addition, we show that DeoPC can be calibrated to the physical state coordinates using a few offline state measurements, or treated as a model predictive control tuning problem when no state measurements are available. The effectiveness of DeoPC is demonstrated through simulations on an unstable batch reactor system.

0.26