CS Paper Radar

Data-Driven Static Output-Feedback Control for Multi-Agent Systems

Paul Serna-Torre, Adam Sedlak, Patricia Hidalgo-Gonzalez

eess.SY math.OC ·submitted 2026-10-02 00:28 UTC · v1

Abstract

This work proposes a data-driven framework that synthesizes output-feedback control for linear time-invariant multi-agent systems (MAS). We first develop two algorithms that use offline data samples of state and input trajectories to determine a Nash equilibrium (NE) for MAS. Next, we formulate a semidefinite program that, given the NE solution, computes the static output-feedback controllers for the agents in MAS. Compared to prior work, virtues of our framework include weaker controllability assumptions, the absence of online information and data-driven estimation of states. Next, we use the proposed framework to design control schemes for voltage and frequency regulation for nonlinear multi-nodal electrical networks with grid-forming and grid-following inverters. Thus, compared to prior work that implements their data-driven frameworks in small-scale numerical examples, we validate the performance of our data-driven framework in high-fidelity nonlinear models of MAS. This implementation in realistic MAS provides insights that small-scale numerical examples may fail to capture. Results show successful grid stabilization and provision of regulation services from the inverters in the grid using our proposed framework. It can attain up to 78% less overshoot and 30% faster settling time than traditional strategies such as proportional-integral control.

Closest papers

Nearest neighbours by meaning across the whole index.

Stability Analysis in IBR-Dominated Grids: Model-Based and Data-Driven Methodologies

eess.SY ·2026-10-15 ·Federico Cecati, Yang Wu, Florian Dörfler, Marco Liserre, Xiongfei Wang +1 more
similarity 0.58
Abstract · Submitted to IEEE Transactions on Power Electronics

Stability issues in converter-dominated grids have a multifold nature, where static, small-signal and large-signal phenomena can influence each other. Capturing the interplay among these different stability aspects requires a rethinking of conventional modeling and analysis tools for power systems. As a further complication, Intellectual Property protection among manufacturers and system operators makes detailed converters and grid models unattainable. This motivates the use of data-driven approaches for stability analysis and control, nevertheless achieving an insightful representation of static, small-signal and large-signal phenomena from data still leaves many open questions. This paper discusses model-based and data-driven methodologies for stability analysis of converter-dominated grids. The instability mechanisms of static, small-signal and large-signal phenomena are conceptually explained, and the capability of different modeling and analysis tools to investigate them is examined. The effectiveness of data-driven methodologies to analyze instability phenomena in their multifold nature is debated, and the challenges on data completeness, model generalization under untrained conditions, physical interpretability, and uncertainty awareness are discussed.

0.16

Compositional Data-Driven Small-Signal Stability Assessment of Power Systems via Output Differential Passivity

eess.SY ·2026-11-16 ·Peng Yang, Xiaohui Zhang, Xi Ru, Feng Liu
similarity 0.56
Abstract · 14 pages

This paper proposes a compositional data-driven small-signal stability assessment framework for interconnected power systems based on output differential passivity (ODP). Without requiring explicit device models, local ODP matrices and scalar indices are estimated directly from measurement trajectories. When internal states are available, trajectory-based linear matrix inequalities (LMIs) are constructed from input-state measurements to estimate the local ODP matrices and scalar indices. When internal states are unavailable, an extended-state representation is constructed from input-output measurements, enabling the same assessment using only external signals. The estimated ODP matrices are combined with the network coupling matrix for compositional assessment of power system stability, while their scalar indices enable decentralized assessment. To address the computational and numerical challenges of trajectory-based LMIs, we introduce right-inverse whitening (RIW) to remove redundant behavioral coordinates and improve computational efficiency, and apply instrumental-variable (IV) preprocessing to alleviate numerical ill-conditioning and mitigate noise effects. Case studies on a modified IEEE 39-bus power system show that ambient measurements satisfy the required informativity conditions and that both formulations yield estimates close to model-based references under the tested noise levels. The reusable local ODP estimates also enable modular stability reassessment after controller updates.

0.30

Mitigating Forced Oscillations in Power Systems via Data-Enabled Predictive Control

eess.SY ·2026-08-27 ·Soraya Daabak, Verena Häberle, Gabriela Hug, Gustavo Valverde
similarity 0.56
Abstract

Sustained forced oscillations in power systems, driven by large cyclic loads such as data centers, pose a challenge to conventional power system stabilizers (PSSs), which rely on fixed tuned parameters and limited adaptability. This paper investigates the use of Data-Enabled Predictive Control (DeePC) as a data-driven alternative for damping such oscillations. DeePC constructs control actions directly from measured trajectories without requiring an explicit system model, enabling adaptation to changing operating conditions. We evaluate the performance of DeePC on a multi-machine two-area system subject to forced oscillations and compare it against a conventional PSS. The study examines the impact of different input-output configurations and the role of representative historical data in the Hankel matrix construction. Results show that DeePC can achieve superior damping. However, its effectiveness depends critically on the quality and representativeness of the underlying dataset. These findings highlight the potential of data-driven predictive control to complement or outperform conventional stabilizers in modern power systems with evolving and uncertain dynamics.

0.24

Data-Driven Communication Topology and Distributed Controller Synthesis: Control-Aware and Co-Design

eess.SY ·2026-09-29 ·Michael C. A. Nestor, Jiaxin Wang, Fei Teng
similarity 0.56
Abstract · Preprint submitted to Automatica

In distributed control schemes, the communication topology that defines information sharing between agents must be designed prior to online control execution. Previous data-driven works typically decouple the topology and controller design problems. This paper investigates data-driven approaches to topology design that guarantee the existence of a stabilizing controller, whilst trading off the level of required communication against control performance. We formulate a data-driven co-design scheme that directly co-optimizes the topology and controller over the link costs and closed-loop control cost. When the topology designer does not have access to the agents' control objectives, we propose a control-aware approach that couples the two design problems within a sequential scheme. In both cases, the topology is optimized within a mixed-integer semidefinite program (MISDP). Simulations including the IEEE 14-bus power system test case demonstrate the effectiveness of both co-design and control-aware schemes. Numerical examples show lower computation time for the control-aware case than for co-design.

0.21

Distributed Droop-Free Control of Grid-Forming Inverters with Dynamic Line and Load Modeling

eess.SY ·2026-09-07 ·Hiya Akhil Gada, Marija Ilic
similarity 0.55
Abstract

Droop-free distributed control has emerged as a promising alternative to conventional linear droop control for coordinating inverter-based resources in AC microgrids. However, existing droop-free methods typically rely on quasi-steady state network models that neglect fast electromagnetic transients and assume a decoupled dependence of active and reactive power on frequency and voltage, respectively. In this paper, we propose a transient-aware droop-free distributed primary/secondary control framework for grid-forming (GFM) inverters. The control objective is to achieve proportional active and reactive power sharing, frequency regulation, and voltage regulation within prescribed bounds. The proposed approach incorporates dynamic models of network lines and loads into the control design, enabling accurate representation of transient behavior while capturing the coupled nature of power flow interactions. A gradient-based distributed control update is derived from an optimization formulation, in which voltage magnitude constraints are enforced through a projection operator. To validate the performance of the proposed control, real-time simulation studies are conducted on a four-inverter microgrid under load changes in both strong and weak grid conditions. The results demonstrate that the proposed method improves transient performance, particularly in weak grids, while preserving the same steady state operating conditions as existing QSS-based droop-free approaches.

0.21

Trajectory Sensitivity-Based Dynamic Assessment of an AI Data Center Under Contingencies

eess.SY ·2026-10-07 ·Arnav Bagga, Saskia A. Putri, Abhishek Banerjee, Xiaofan Wu
similarity 0.55
Abstract · 7 pages, 5 figures

Artificial Intelligence (AI) data centers are emerging as converter-dominated, parameter-rich electrical systems whose dynamic response depends on fast workload-driven demand variations, tightly regulated data-hall converters, and coordinated on-site sources. Assessing such systems by repeatedly solving nonlinear time-domain models for every outage, load realization, and parameter perturbation is computationally expensive and provides limited insight into response sensitivity. This paper presents a trajectory sensitivity (TS)-based dynamic assessment framework for a self-contained AI data center supplied by a 2 kV DC microgrid with a grid-tied interface. The model includes time-varying data-hall load profiles, a voltage source converter (VSC), battery energy storage systems (BESS) units, supercapacitors, and synchronous-generation-side sources. For each disturbance, firstly, TS are computed along the nonlinear disturbance trajectory, capturing the local effect of source trips, data-hall outages, converter controls, and load ramps. Later, the computed TS data is used to estimate system trajectories under simultaneous parameter perturbations. Validation against full nonlinear ODE simulations with $\pm 15\%$ perturbations shows close agreement. In addition, the TS-based approach reduces computational time of dynamic-response evaluations from seconds to milliseconds, demonstrating its potential as a scalable screening tool for AI data center dynamics.

0.17

Harmonic Stability of Power Systems: A Control-Theoretic Definition and Assessment Criteria

eess.SY ·2026-08-20 ·N. Bhoir, A. Sarkar, J. E. Machado, J. Schiffer
similarity 0.54
Abstract

Harmonic interactions have become a defining dynamic stability phenomenon in converter-based power systems (CBPSs). However, a formalization of the notion of harmonic stability in the context of nonlinear dynamical systems is not available thus far. In this paper, we propose a definition of harmonic stability formulated as a combination of two standard stability notions, namely, bounded-input bounded-output (BIBO) and internal stability properties with respect to any nominal periodic trajectory. Moreover, we rigorously show that the local harmonic stability of any nominal periodic trajectory of nonlinear CBPSs is implied by the stability properties of its linear time-periodic (LTP) approximation. In addition, to enable computationally tractable stability assessment, we develop a framework based on harmonic state-space (HSS) representations of LTP models. In particular, we provide time-invariant linear matrix inequality (LMI) conditions to certify harmonic stability. The proposed methodology is illustrated on a grid-following converter system, where the HSS-based analysis numerically confirms harmonic stability around the periodic operating trajectory.

0.29

A Unified Framework for Robust Data-Driven Model Predictive Control with Terminal Ingredients

eess.SY ·2026-10-04 ·Zhaohua Yang, Nan Bai, Pengyu Wang, Ling Shi
similarity 0.54
Abstract · Submitted for publication

This paper proposes a unified framework for robust data-driven model predictive control (MPC) with terminal ingredients for unknown linear time-invariant systems. Based on Willems' fundamental lemma, a single offline input-output trajectory is used as an implicit model, while online implementation only requires past input-output measurements. Bounded measurement noise is considered in both offline and online output data. The framework consists of an offline stage, where robust terminal ingredients are designed directly from noisy data, and an online stage, where these ingredients are incorporated into a one-step MPC scheme. Recursive feasibility of the proposed framework and practical exponential stability of the closed-loop system are established. Numerical results illustrate the performance tuning capability of the terminal set, with particularly pronounced benefits for short prediction horizons, and show that the proposed framework achieves performance comparable to data-driven MPC without terminal ingredients while requiring a reduced prediction horizon and less online computation.

0.13