CS Paper Radar

Accurate Plate Reverb Parameter Estimation Using Two-Stage Evolutionary Search

Byunghoo Park, Jayeon Yi, Takyoung Kim, Minje Kim

eess.AS cs.SDeess.SP ·submitted 2026-08-28 19:39 UTC · v1
publishedunusual

Abstract

We describe our submission to Task A of the 1st DAFx parameter estimation challenge. The task is to recover the six physical parameters of a simulated metal-plate reverberator -- its dimensions and material properties -- from a single impulse response (IR). We treat this as a black-box optimization: candidate parameter sets are fed to the simulator and scored by a loss against the target IR. The method has two stages. The first uses CMA-ES, an evolutionary optimizer, to recover five of the six parameters, comparing IRs under an amplitude-normalized loss. Amplitude normalization makes the search robust but discards the cue to the sixth parameter, the plate's surface density; a second stage therefore estimates it alone, with a ternary search on the un-normalized loss. As the choice of loss strongly affects the search, we select it beforehand, and analyze why compression in the common multi-scale spectral loss degrades recovery. Finally, we test our method on a validation set of 50 IRs, discuss a pathological failure mode, and ablate to justify having two different stages instead of a unified CMA-ES search.

Comment
Accepted as a challenge paper at the 29th International Conference on Digital Audio Effects (DAFx), Cambridge, MA, USA, 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Transformer-Based Plate Parameter Estimation with Differentiable and Particle-Swarm Refinement

eess.AS ·2026-10-20 ·David Marttila, Rodrigo Diaz, Pablo Tablas De Paula, Ilias Ibnyahya, Chin-Yun Yu
publishedcode/data similarity 0.65
Abstract · 3 pages, 1 figure, 2 tables. DAFx26 Parameter Estimation Challenge, Task A. Code: https://github.com/davidmarttila/dafx_challenge

We present two Transformer-based methods for Task A of the 1st DAFx Parameter Estimation Challenge, which requires estimating six effective physical parameters of a synthetic plate-reverb model from its impulse response (IR). Method A1 combines an Audio Spectrogram Transformer encoder and Transformer regressor with differentiable IR refinement. Method A2 uses the same encoder to condition a continuous normalizing flow and refines sampled candidates using particle swarm optimisation (PSO) and gradient polishing. Both methods preserve the absolute IR scale to recover surface density. On a synthetic holdout set of 100 IRs, both refinement procedures reduce waveform and parameter errors by more than three orders of magnitude relative to the unrefined neural outputs. The PSO-based pipeline achieves the lowest errors, indicating near-perfect recovery in this matched synthetic setting.

0.43

A multi-resolution spectrogram approach for estimating the physical parameters of a plate reverb

eess.AS ·2026-09-23 ·Jared Lipkin, Meiying Chen, Benjamin R. Thompson, Andrea Cogliati, David A. Anderson +1 more
published similarity 0.60
Abstract · Parameter Estimation Challenge, Task A

The ResNet-18 image classification model is employed to determine the physical parameters of a plate reverb from a recording of the impulse response. The model is adapted to derive parameters using normalized and downsampled multi-resolution spectrograms computed from the provided impulse responses (IRs). To refine the prediction of the output location, the spectral phase response is also included as an additional input channel to the network since multiple output locations can give the same magnitude response for high-order resonant modes. On a 5000 IR validation set, our model achieves an average normalized mean squared error (NMSE) of 0.02920 across all parameters, with the lowest average NMSE occurring for parameters yo (0.00228), Ly (0.00347), and xo (0.00574).

0.37

Count-Density Networks for Modal Plate Parameter Estimation

eess.AS ·2026-11-01 ·Rodrigo Diaz, Pablo Tablas De Paula, David Marttila, Ilias Ibnyahya, Chin-Yun Yu
publishedcode/data similarity 0.59
Abstract · 3 pages, 1 figure, 1 table. DAFx26 Parameter Estimation Challenge, Task B. Code: https://github.com/davidmarttila/dafx_challenge

We describe two submissions to Task B of the 1st DAFx Parameter Estimation Challenge, which estimates an unknown number of modal frequency, decay, and gain triples from a synthetic plate-reverb impulse response. The first method combines pooled spectral features with time-domain and absolute-scale conditioning in a real-valued convolutional count-density network, while the second uses a complex-valued Transformer count-density network. Both methods jointly infer the modal count and per-mode attributes directly from the IR. On an independently generated 100-IR comparison set, the two neural estimators achieve lower overall challenge error than the evaluated classical baselines, with frequency and decay estimation substantially more accurate than gain estimation.

0.48

Simulation-Based Inference for Plate Reverb System Identification

eess.AS cs.LG ·2026-09-28 ·Dylan Sechet, Marc Evrard, Matthieu Kowalski
publishedunusual similarity 0.57
Abstract

We address Task A of the 1st DAFx Parameter Estimation Challenge, which aims to retrieve the physical parameters of a plate model from an impulse response. To do so, we use the Simulation-Based Inference (SBI) framework, in which we train a neural network to estimate a density over plate parameters given an impulse response, using a dataset generated by the simulator. Inference for a new impulse response then requires only a forward pass through the network, without involving the simulator. For each test observation, we fine-tune a specific network: additional simulation rounds are performed by sampling parameters from the current estimated distribution, simulating the corresponding impulse responses, and fine-tuning to produce the specialized network.

0.37

Rethinking Magnitude Compression in Spectral Losses for DDSP Parameter Estimation

cs.SD ·2026-10-16 ·Byunghoo Park, Jayeon Yi, Minje Kim
code/data similarity 0.53
Abstract · 5 pages, 2 figures. Submitted to ICASSP 2027

Spectral losses for differentiable digital signal processing (DDSP) commonly compress magnitudes, for example by using log-magnitude terms. Such compression mimics human perception, but whether it helps the optimization is less clear, and is usually found only by comparing trained models. In this work, we show that whether compression helps depends on the system's informative region: the region of its dynamic range that carries the information pointing toward the target. To indicate where this region lies without having to train, we introduce concordance, which measures how well a loss orders candidate parameter settings by their distance from the target. We then compare uncompressed, compressed, and combined losses by fitting a modal plate reverb and a subtractive synthesizer model to target sounds. A third system, selected for its low-energy informative region, tests the relationship in the opposite direction. In every system, the loss that matches the informative region performs best: the uncompressed one where the region lies at high energies, and the compressed one where it lies low. Surprisingly, the common combination of both log-magnitude and linear-magnitude terms performs best in none of the systems. Code and audio examples are available at https://github.com/superstem000/compression-analysis

0.30

The Modular CMA-ES: A Framework for Modern Evolution Strategies

cs.NE ·2026-10-07 ·Jacob de Nobel, Diederick Vermetten, Anna V. Kononova, Carola Doerr, Thomas Bäck
benchmark similarity 0.49
Abstract

Since their introduction, modern evolution strategies, such as the Covariance Matrix Adaptation Evolution Strategy (CMA-ES), have become established as powerful methods for continuous black-box optimization. This success has led to a wide range of proposed modifications, each designed to improve performance or behavior in specific optimization scenarios. However, because these developments have largely been introduced and studied in isolation, their interactions remain comparatively underexplored. In this paper, we present the Modular CMA-ES (ModCMA), a configurable framework that integrates a wide range of mechanisms from modern evolution strategies within a single implementation. By decomposing CMA-ES into modules with interchangeable options for sampling, selection and recombination, step-size adaptation, matrix adaptation, and restarting, ModCMA enables systematic exploration of a large design space of modern evolution strategies and facilitates the construction, comparison, and automated configuration of new algorithm variants. We illustrate the benefits of this modular approach through two example studies. First, we compare several matrix-adaptation mechanisms in terms of their computational cost and optimization performance. Second, we use automated algorithm configuration to specialize ModCMA to individual benchmark problems and analyze the resulting configurations. Together, these examples demonstrate how the framework can be used both to study individual algorithmic design choices and to explore their combinations in a systematic and reproducible manner.

0.43

An Unbounded Archive-based Transfer Strategy for Dynamic Multi-Objective Optimization with a Changing Number of Objectives

cs.NE ·2026-09-23 ·Zhiyun Xiao, Ke Shang, Yajun Liu, Jianguo Li, Shaojiang Wang +1 more
publishedbenchmark similarity 0.48
Abstract

Dynamic multi-objective optimization with a variable number of objectives is difficult because objective-dimensional variations may significantly change the Pareto front and degrade algorithm adaptability. This paper proposes an unbounded archive-based transfer strategy (UATS), which maintains an unbounded archive of offspring solutions within each environment stage and extracts feasible nondominated solutions as transferable elites when objective changes occur. UATS is embedded into SPEA2SDE to construct UATS-SPEA2SDE, enabling the algorithm to reuse historical evolutionary information while retaining the convergence and diversity advantages of shift-based density estimation. Experiments are conducted on four benchmark problems under three objective-changing settings, where UATS-SPEA2SDE is compared with a restart-based SPEA2SDE baseline and four representative dynamic multi-objective optimization algorithms. The results indicate that the archive-guided transfer improves recovery after environmental changes and enhances adaptability to objective-number variations.

0.32

Inverse Synthesis of Shock Time Series from Shock Response Spectra Using Ensembles of Conditional Variational Autoencoders

cs.LG eess.SP ·2026-10-09 ·Adam Watts, Charles Young, Ryan Bowering, Andrew Jeon, Destry Newton
benchmark similarity 0.48
Abstract · 28 pages, 12 figures

The shock response spectrum (SRS) characterizes the peak responses of single-degree-of-freedom systems to transient acceleration. Because the mapping from an acceleration time series (waveform) to its SRS is many-to-one, inverse synthesis seeks candidate waveforms consistent with a prescribed spectrum. We extend an earlier conditional variational autoencoder (CVAE) framework with a recurrent decoder that predicts multiscale wavelet coefficients and reconstructs waveforms through an inverse discrete wavelet transform. Individual models exhibit limited variability under latent sampling, motivating an ensemble of independently trained models spanning different mother wavelets and decomposition levels. Each member produces a separate candidate waveform for the same target SRS. Evaluation on four held-out benchmark datasets shows lower mean and median spectral errors for the illustrated wavelet model than for the earlier direct time-domain CVAE and a sum-of-decayed-sinusoids (SDS) baseline. A conditioning study examines frequency-grid and encoding choices. Comparisons with published inverse-SRS methods demonstrate superior performance across four holdout benchmark datasets (two operational shock datasets, one earthquake dataset, and one synthetic shock dataset) and competitive performance on synthetic targets reported by Brake. Single-model inference requires approximately 0.1-0.6 ms per waveform during batched inference compared with 5-8 s for SDS, excluding offline training. This low inference cost enables rapid generation of distinct SRS-compatible candidate waveforms across the ensemble, although their physical suitability requires assessment beyond spectral agreement.

0.29