CS Paper Radar

Simulation-Based Inference for Plate Reverb System Identification

Dylan Sechet, Marc Evrard, Matthieu Kowalski

eess.AS cs.LG ·submitted 2026-09-28 14:38 UTC · v1
publishedunusual

Abstract

We address Task A of the 1st DAFx Parameter Estimation Challenge, which aims to retrieve the physical parameters of a plate model from an impulse response. To do so, we use the Simulation-Based Inference (SBI) framework, in which we train a neural network to estimate a density over plate parameters given an impulse response, using a dataset generated by the simulator. Inference for a new impulse response then requires only a forward pass through the network, without involving the simulator. For each test observation, we fine-tune a specific network: additional simulation rounds are performed by sampling parameters from the current estimated distribution, simulating the corresponding impulse responses, and fine-tuning to produce the specialized network.

Journal ref
Proc. 29th Int. Conf. Digital Audio Effects (DAFx26), Cambridge, MA, USA, 1-4 Sept. 2026 (Parameter Estimation Challenge, Task A)

Closest papers

Nearest neighbours by meaning across the whole index.

Count-Density Networks for Modal Plate Parameter Estimation

eess.AS ·2026-11-01 ·Rodrigo Diaz, Pablo Tablas De Paula, David Marttila, Ilias Ibnyahya, Chin-Yun Yu
publishedcode/data similarity 0.61
Abstract · 3 pages, 1 figure, 1 table. DAFx26 Parameter Estimation Challenge, Task B. Code: https://github.com/davidmarttila/dafx_challenge

We describe two submissions to Task B of the 1st DAFx Parameter Estimation Challenge, which estimates an unknown number of modal frequency, decay, and gain triples from a synthetic plate-reverb impulse response. The first method combines pooled spectral features with time-domain and absolute-scale conditioning in a real-valued convolutional count-density network, while the second uses a complex-valued Transformer count-density network. Both methods jointly infer the modal count and per-mode attributes directly from the IR. On an independently generated 100-IR comparison set, the two neural estimators achieve lower overall challenge error than the evaluated classical baselines, with frequency and decay estimation substantially more accurate than gain estimation.

0.48

Transformer-Based Plate Parameter Estimation with Differentiable and Particle-Swarm Refinement

eess.AS ·2026-10-20 ·David Marttila, Rodrigo Diaz, Pablo Tablas De Paula, Ilias Ibnyahya, Chin-Yun Yu
publishedcode/data similarity 0.61
Abstract · 3 pages, 1 figure, 2 tables. DAFx26 Parameter Estimation Challenge, Task A. Code: https://github.com/davidmarttila/dafx_challenge

We present two Transformer-based methods for Task A of the 1st DAFx Parameter Estimation Challenge, which requires estimating six effective physical parameters of a synthetic plate-reverb model from its impulse response (IR). Method A1 combines an Audio Spectrogram Transformer encoder and Transformer regressor with differentiable IR refinement. Method A2 uses the same encoder to condition a continuous normalizing flow and refines sampled candidates using particle swarm optimisation (PSO) and gradient polishing. Both methods preserve the absolute IR scale to recover surface density. On a synthetic holdout set of 100 IRs, both refinement procedures reduce waveform and parameter errors by more than three orders of magnitude relative to the unrefined neural outputs. The PSO-based pipeline achieves the lowest errors, indicating near-perfect recovery in this matched synthetic setting.

0.43

Accurate Plate Reverb Parameter Estimation Using Two-Stage Evolutionary Search

eess.AS cs.SDeess.SP ·2026-08-28 ·Byunghoo Park, Jayeon Yi, Takyoung Kim, Minje Kim
publishedunusual similarity 0.57
Abstract · Accepted as a challenge paper at the 29th International Conference on Digital Audio Effects (DAFx), Cambridge, MA, USA, 2026

We describe our submission to Task A of the 1st DAFx parameter estimation challenge. The task is to recover the six physical parameters of a simulated metal-plate reverberator -- its dimensions and material properties -- from a single impulse response (IR). We treat this as a black-box optimization: candidate parameter sets are fed to the simulator and scored by a loss against the target IR. The method has two stages. The first uses CMA-ES, an evolutionary optimizer, to recover five of the six parameters, comparing IRs under an amplitude-normalized loss. Amplitude normalization makes the search robust but discards the cue to the sixth parameter, the plate's surface density; a second stage therefore estimates it alone, with a ternary search on the un-normalized loss. As the choice of loss strongly affects the search, we select it beforehand, and analyze why compression in the common multi-scale spectral loss degrades recovery. Finally, we test our method on a validation set of 50 IRs, discuss a pathological failure mode, and ablate to justify having two different stages instead of a unified CMA-ES search.

0.52

A multi-resolution spectrogram approach for estimating the physical parameters of a plate reverb

eess.AS ·2026-09-23 ·Jared Lipkin, Meiying Chen, Benjamin R. Thompson, Andrea Cogliati, David A. Anderson +1 more
published similarity 0.52
Abstract · Parameter Estimation Challenge, Task A

The ResNet-18 image classification model is employed to determine the physical parameters of a plate reverb from a recording of the impulse response. The model is adapted to derive parameters using normalized and downsampled multi-resolution spectrograms computed from the provided impulse responses (IRs). To refine the prediction of the output location, the spectral phase response is also included as an additional input channel to the network since multiple output locations can give the same magnitude response for high-order resonant modes. On a 5000 IR validation set, our model achieves an average normalized mean squared error (NMSE) of 0.02920 across all parameters, with the lowest average NMSE occurring for parameters yo (0.00228), Ly (0.00347), and xo (0.00574).

0.37

Physics-Informed Identification of Tensegrity Prestress across Taut-Slack Transitions

cs.LG cs.CEeess.SPphysics.flu-dyn ·2026-11-02 ·Sandesh Lamsal, Sumit Kumar, Rubi Bhandari, Subhamoy Sen, Andrzej Rutkiewicz +2 more
similarity 0.48
Abstract · 44 pages, 15 figures, 15 tables; supplementary material included

Prestress governs the stability, stiffness, and dynamic behavior of tensegrity structures, but it is not directly observable from sparse structural measurements, and it may decrease during service life. Under strong excitation, the cables may slacken and the dynamics become nonsmooth. Existing identification methods are limited to the taut regime, and physics-informed networks for tensegrities solve only the forward problem of predicting the response from known member parameters. This study formulates the inverse problem. Neural networks are trained on the equation-of-motion residual in constrained Cartesian coordinates, where the mass matrix is constant and the force densities enter linearly. The force densities, damping, and axial stiffness are trainable parameters, and the tension-only cable law is kept. A Fisher-information analysis shows, before inversion, which member parameters a record can determine. The method is tested on simulated planar tensegrity frames with up to five modules and a three-dimensional prism, and on measured records of a biomimetic leg and a full-scale tensegrity simplex. On the one-module frame, the identifiable force densities are recovered within 1.5% from noisy accelerations at half the free coordinates, on records with and without taut-slack transitions. Records with transitions determine members that taut records leave undetermined. On the five-module frame, a 16-cable two-span bridge, the median force-density error rises moderately, to 4.2%. On measured records, an identified spring stiffness is within 0.1% of its independently measured value on average, and the identified simplex prestress at 13 levels agrees with its cable force transducers to 2.9% root-mean-square.

0.28

Variational Parameter Calibration with Physics-Aware Latent-Space Surrogates

cs.LG physics.comp-phphysics.data-anphysics.flu-dyn ·2026-08-11 ·Qiyao Zhou, Xujia Zhu, Pierre Joli, Yu Cong, Sibo Cheng
similarity 0.48
Abstract

Forward and inverse modeling of parametric dynamical systems requires surrogate models that are not only accurate for state prediction, but also informative for parameter calibration. However, a systematic end-to-end differentiable formulation for coupling deep-learning-based reduced-order surrogates with variational parameter estimation remains underdeveloped. In this work, we introduce a physics-aware neural-network-based latent-space framework for reduced-order forward modeling and variational parameter estimation. The proposed autoencoder-based approach yields a differentiable surrogate that maps physical parameters to predicted flow fields through a latent representation. The observable supervision is used during offline training to encourage the latent variables to retain information correlated with system parameters, while the online inverse problem is solved in the parameter space through the surrogate-induced observation operator. The method is evaluated on two computational-fluid-dynamics benchmarks. The results show that reconstruction accuracy alone is insufficient for inverse modeling, owing to the lack of end-to-end differentiability or physics awareness for variational parameter calibration. Quantitative latent-space analysis further shows that observable supervision improves case-level separability and temporal organization of latent representations. Experiments with realistic measurement settings, including noisy, low-resolution, randomly masked, and block-wise partial observations, demonstrate the robustness of the proposed framework and show that it generally reduces calibration error and variability compared with the standard surrogate models.

0.04

Scalable Bayesian Optimization of Composite Functions for Image-Based Inverse Problems in Materials Characterization

cs.LG cond-mat.mtrl-sci ·2026-09-02 ·Dasol Yoon, Poompol Buathong, Chia-Hao Lee, Yujia Zhang, David A. Muller +1 more
similarity 0.46
Abstract · 28 pages. Dasol Yoon and Poompol Buathong contributed equally

Estimating physical parameters from scientific images is a common inverse problem in materials characterization that often relies on expensive physics-based simulations. In electron microscopy, specimen thickness and crystal mistilt are critical parameters that govern how electrons scatter through the sample, and therefore the accuracy of any atomic-scale structure recovered from it. They are commonly inferred by matching experimental position-averaged convergent-beam electron diffraction (PACBED) patterns to simulated ones, but grid searches scale poorly and neural-network methods require extensive pretraining that may not transfer to new conditions. Here, we propose scalable Bayesian optimization of composite functions (SBOCF), a simulation-efficient method that exploits the known composite structure of the image-matching objective and the intermediate information contained in simulated images. By representing PACBED images with patch-level summaries and two correction terms, SBOCF preserves the original pixel-wise objective while reducing the number of modeled outputs from 24,649 to 11. Under a budget of 50 simulator evaluations, SBOCF outperformed standard Bayesian optimization with expected improvement on synthetic SrTiO3 benchmarks with thick and thin specimens, reducing the median final SSE by up to 290 times in the thick-sample case. On experimental data, SBOCF produced parameter estimates consistent with previously reported values without task-specific pretraining. For a simulated mistilted specimen, using the SBOCF estimates in a downstream ptychographic reconstruction recovered sharp atoms that were otherwise blurred. These results establish SBOCF as a promising approach for inverse problems involving expensive simulators and high-dimensional structured outputs.

0.27

Ground-Wing: A Parametric 3D Wing-in-Ground-Effect Dataset for Benchmarking Neural Surrogate Models

cs.LG ·2026-11-03 ·Andrea Cenzato, Lukas Karch, Andre Luckow, Yoran Pichon, Francesco Pasqua +4 more
benchmarkcode/data similarity 0.46
Abstract

This paper presents a CFD dataset of a highly parametrized 3D wing operating in ground effect, designed for benchmarking neural surrogate models for aerodynamic prediction, using a wing shape and flow conditions typically encountered in motorsport applications. The dataset comprises 770 RANS simulations of 194 unique wing configurations, sampled across 27 airfoil profile variants and 4 distances from the ground, spanning variations in wing sweep, chord, taper, angle of attack, and tip twist. Six neural network architectures representing distinct paradigms --- convolutional (DoMINO), graph-based (X-MeshGraphNet), transformer-based (AB-UPT, GeoTransolver, GAOT), and JEPA-based (AeroJEPA) --- are evaluated on their ability to predict surface pressure coefficient and wall shear stress distributions, from which integral drag and lift coefficients are recovered. The dataset is intended to be used as a challenging benchmark for surrogate CFD models, due to the uniqueness of the ground effect being absent from other wing and airfoil datasets. The dataset is available for download at https://huggingface.co/datasets/andreacenzato/Ground-Wing

0.21