CS Paper Radar

Ground-Wing: A Parametric 3D Wing-in-Ground-Effect Dataset for Benchmarking Neural Surrogate Models

Andrea Cenzato, Lukas Karch, Andre Luckow, Yoran Pichon, Francesco Pasqua, Abouzar Ghasemi, Rishikesh Ranade, Ira Shokar, Julia Kowalski

cs.LG ·submitted 2026-11-03 09:33 UTC · v2
benchmarkcode/data

Abstract

This paper presents a CFD dataset of a highly parametrized 3D wing operating in ground effect, designed for benchmarking neural surrogate models for aerodynamic prediction, using a wing shape and flow conditions typically encountered in motorsport applications. The dataset comprises 770 RANS simulations of 194 unique wing configurations, sampled across 27 airfoil profile variants and 4 distances from the ground, spanning variations in wing sweep, chord, taper, angle of attack, and tip twist. Six neural network architectures representing distinct paradigms --- convolutional (DoMINO), graph-based (X-MeshGraphNet), transformer-based (AB-UPT, GeoTransolver, GAOT), and JEPA-based (AeroJEPA) --- are evaluated on their ability to predict surface pressure coefficient and wall shear stress distributions, from which integral drag and lift coefficients are recovered. The dataset is intended to be used as a challenging benchmark for surrogate CFD models, due to the uniqueness of the ground effect being absent from other wing and airfoil datasets. The dataset is available for download at https://huggingface.co/datasets/andreacenzato/Ground-Wing

Closest papers

Nearest neighbours by meaning across the whole index.

Airfoil2Vec: Spectral Geometry-Conditioned Neural Surrogate Models for Airfoil Aerodynamics and a Downforce-Generating CFD Dataset

cs.LG physics.flu-dyn ·2026-09-25 ·Haitz Sáez de Ocáriz Borde, Flavio Savarino, Andrei Cristian Popescu, Pietro Innocenzi, Pantelis Papageorgiou +1 more
datasetcode/data similarity 0.76
Abstract

We introduce a dataset of approximately 10,000 Reynolds-Averaged Navier-Stokes (RANS) simulations of steady, incompressible, two-dimensional subsonic flow around downforce-generating NACA 4-digit airfoils, targeting aerodynamic regimes relevant to automotive and motorsport applications (openly available on https://huggingface.co/datasets/ratiolabs/downforce-airfoils). Using this resource, we study geometry-conditioned neural surrogates for fast flow prediction, comparing neural fields with neural ODEs, MLPs with graph-based models, and several spectral geometry-conditioning methods. We further propose Airfoil2Vec, an airfoil-specific spectral geometry encoder that combines the joint contour spectrum with separate spectral representations of camber and thickness, for predicting continuous pressure and velocity fields. We evaluate generalization through angle-of-attack interpolation, interpolation and extrapolation to unseen NACA 4-digit geometries, and generalization to unseen non-NACA airfoils. The resulting surrogate accurately captures aerodynamic quantities and qualitative flow features while providing orders-of-magnitude speedups over conventional computational fluid dynamics.

0.21

Neural Field Ensembles for Aerodynamic Surface Prediction: Winning Solution to the ONERA CRM Wall Distribution 2025 Challenge

cs.LG physics.flu-dyn ·2026-09-15 ·Lionel Salesses, Caroline Sainvitu, Tariq Benamara
similarity 0.72
Abstract

Machine-learning surrogate models offer a promising alternative to high-fidelity Computational Fluid Dynamics (CFD) simulations for aerodynamic analysis and design. However, constructing accurate surrogates for realistic aircraft configurations remain challenging due to complex geometries, multiple flow regimes, and limited training data. This work presents the methodology that achieved first place in the ONERA CRM Wall Distribution Regression Challenge, which focuses on predicting pressure and skin-friction coefficient distributions over the NASA Common Research Model wing-body-pylon-nacelle configuration under different operating conditions. The proposed approach formulates the problem as a conditional neural field mapping spatial coordinates, surface normals, and operating conditions to aerodynamic wall quantities. Fourier feature encoding, a relative squared error objective aligned with the challenge metric, ensemble learning, and $k$-fold cross-validation are progressively introduced to improve prediction accuracy and exploit the limited training data. Beyond presenting the final methodology, the paper documents the successive model design choices that led to the winning solution through a comprehensive ablation study and discusses several alternative approaches that were investigated but ultimately discarded. On the hidden competition test set, the proposed methodology achieves an overall score of 8.81, outperforming the strongest organizer-provided baseline, which achieved a score of 8.64, while requiring approximately three orders of magnitude fewer trainable parameters. These results illustrate that carefully designed coordinate-based neural fields constitute an efficient and robust framework for aerodynamic surrogate modeling on complex geometries under limited-data conditions.

0.13

A Data Fusion Framework for Grounding Aerospace Surrogate Model via Experimental Wind-Tunnel Observations

cs.LG ·2026-09-02 ·Nitin Nagesh Kulkarni, Dheeraj Vemula, Yin Yu, Peter Lyu, Juan J. Alonso
hot direction similarity 0.71
Abstract

Aerodynamic surrogate models trained on high-fidelity CFD data reproduce numerical predictions of both scalar outputs and entire fields accurately, yet their predictive fidelity is limited by systematic discrepancies between CFD and experimental observations. We present an experimentally grounded correction framework that adapts a CFD-trained deep learning surrogate using wind-tunnel PSP measurements. A Geotransolver surrogate trained on 2,300 high-fidelity CFD simulations of the NASA CRM wing-body configuration, spanning geometric variation, Mach 0.70-0.85, and angles of attack 0 to 4 degrees, reproduces the CFD integrated aerodynamic forces and pitching moment to R2 > 0.99 but does not match the experimental data. To incorporate experimental information without retraining the surrogate, a correction network is trained on spatially registered PSP measurements at two freestream Mach numbers (0.70 and 0.85) across the same angle-of-attack range, learning the discrepancy between the surrogate-predicted and experimentally measured surface-pressure distributions. At Mach 0.85 the correction substantially improves agreement with PSP, particularly at the wing suction peak, shock location, and subsequent pressure recovery, reducing both the magnitude of the prediction error and the fraction of wetted surface on which it exceeds 0.05 in Cp, and it does so from a limited experimental dataset without modifying the pretrained surrogate parameters. On held-out angles of attack the grounded surrogate agrees with measurement to within 2.3-2.7% of the measured Cp range, and outperforms direct interpolation between the measured conditions at every state tested. Experimental measurements can therefore ground a large-scale simulation-trained surrogate by learning systematic CFD-to-experiment discrepancies while preserving its generalization capability and computational efficiency.

0.29

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.68
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06

Condition-Enhanced Generative Adversarial Network for Aerodynamic Configuration Design of Commercial Aircraft

cs.LG ·2026-10-25 ·Youzheng Yu, Jiaqing Kou, Weiwei Zhang
similarity 0.67
Abstract

Generative machine learning provides an end-to-end framework for aerodynamic design optimization by generating diverse aerodynamic configurations conditioned on target performance. However, the generated designs may violate geometric constraints or deviate from the prescribed aerodynamic performance. Therefore, we propose a Condition-Enhanced Generative Adversarial Network (CEGAN) that embeds geometric and aerodynamic information into the generative process. A condition-informed loss function is developed by combining a geometry-guided feasibility penalty with an aerodynamic performance penalty evaluated by surrogate models trained on the same dataset. Additionally, an output filtering mechanism discards infeasible designs using these surrogate models, ensuring compliance with prescribed conditions. The method is demonstrated on aircraft configurations similar to the Cessna Citation X. Each configuration is represented by 28 shape parameters, whose aerodynamic performance is evaluated using OpenVSP. Interpolation and extrapolation tests are conducted for different network architectures and conditioning strategies. Compared with the baseline model, CEGAN reduces the average generation error by at least 36% for interpolated conditions and by at least 46% under extreme extrapolation conditions, while successfully producing diverse and physically feasible designs that extend beyond the training distribution. Therefore, the proposed CEGAN framework offers a robust and accurate tool for rapid aerodynamic configuration exploration during the conceptual design phase.

0.24

A Residual Learning Approach for Unsteady Aerodynamic Load Prediction

cs.LG physics.flu-dyn ·2026-08-18 ·Divya Sanghi, Carlos E. S. Cesnik
benchmark similarity 0.67
Abstract · 27 pages, 21 figures, 9 Tables

This paper investigates the feasibility of using residual learning to improve unsteady aerodynamic load prediction for aeroelastic applications. The machine learning technique selected for the study is the long short-term memory (LSTM) neural network, which is used for its suitability for sequential data with aerodynamic memory effects. The approach is investigated for the NLR 7301 airfoil benchmark using high-fidelity CFD lift data for prescribed pitch and plunge motions in the transonic flow regime in the presence of shock motion. An analytical unsteady aerodynamic model based on the Wagner function is used as a physics-based baseline, and the neural network is trained to learn the difference between the CFD lift coefficient and the Wagner prediction. The residual model is compared with a direct neural-network model trained to predict the CFD lift coefficient. The comparison includes feature and normalization studies, external benchmark cases, and leave-one-out and leave-family-out generalization tests across a range of sinusoidal and non-sinusoidal motions. The residual model performs best when its inputs align with the Wagner formulation variables, generally giving lower error and more consistent performance across training runs, though the direct model remains more accurate for some high-frequency cases. The residual model also generalizes better in the leave-one-out and leave-family-out tests, with a smaller increase in error than the direct model when entire motion families are withheld from training. Overall, the results indicate that residual learning shows promise as a modular approach for augmenting classical low-order aerodynamic theories, especially when the physics baseline removes a structured part of the aerodynamic response and leaves a lower-variance correction for the neural network to learn.

0.35

High-Fidelity Aerostructural Dataset of Transonic Wings in Cruise Conditions

cs.LG cs.CEphysics.flu-dyn ·2026-10-27 ·Pavankumar Koratikere, Abhijnan Dikshit, Leifur Leifsson
benchmarkcode/data similarity 0.66
Abstract · The dataset is available at: \url{https://huggingface.co/datasets/computationaldesignlab/transonic-wing-aerostruct-dataset}

Recent advances in machine learning (ML) have the potential to substantially accelerate aircraft wing design, a process that has traditionally required extensive high-fidelity simulation and design iteration. Existing public datasets for ML-based wing design have focused primarily on aerodynamic performance, with limited consideration of the multidisciplinary interactions that govern practical aircraft design. In particular, efficient wing design requires simultaneous consideration of aerodynamic performance and structural integrity, yet no publicly available datasets capture this coupled aerostructural behavior at high-fidelity. To address this need, a high-fidelity multidisciplinary dataset for static aerostructural analysis of transonic wings is introduced. The dataset includes 2471 samples, along with three out-of-distribution samples. The wing planform geometry is parameterized by span, sweep, dihedral, tip chord, and tip twist, while the airfoil cross-sections are parameterized using the class-shape transformation method. The analysis is further parameterized by Mach number, angle of attack, altitude, and structural load factor. The utility of the dataset is demonstrated by training state-of-the-art ML models to predict aerodynamic surface quantities, integrated aerodynamic performance quantities, and the failure distribution of the wingbox. ML models achieve at most 0.0309 normalized root mean squared error (NRMSE) in the prediction of aerodynamic quantities and at most 0.1189 NRMSE in the prediction of failure distribution of the wingbox. By providing coupled aerodynamic and structural responses for a diverse set of transonic wings, this dataset establishes a benchmark for developing, evaluating, and comparing multi-physics ML models for wing design. Broadly, it is intended to encourage creation of similar high-fidelity multi-physics benchmark datasets across engineering domains.

0.38

Residual-Guided Multi-Step Conditional Generation for Fast Airfoil Flow Field Prediction

cs.CE ·2026-11-17 ·Weishao Tang, Mingcheng Lei, Yufei Zhang
similarity 0.65
Abstract

Deep-learning surrogate models for aerodynamic flow prediction are efficient within the training distribution, but their accuracy often degrades sharply in out-of-distribution (OOD) scenarios. To improve OOD robustness for airfoil flow-field inference, this study proposes a residual-guided sequential inference framework to correct the unreliable local flow field. The framework consists of three Transformer-based components: a Flow Initializer for direct flow prediction, a Residual-based Corrector for high-residual regions, and a Shock-based Corrector for shock regions. The framework is evaluated on an engineering-oriented OOD test set built from CFD-based aerodynamic optimization trajectory. The proposed framework reduces the L1 error, CL error, and CD error by 30%, 59%, and 41%, respectively, relative to the usual single step Geo-to-Flow prediction. The additional iterative inference cost is only 0.25s per sample. These results demonstrate that the proposed framework provides an effective route for improving OOD robustness in airfoil surrogate modeling.

0.18