CS Paper Radar

Residual-Guided Multi-Step Conditional Generation for Fast Airfoil Flow Field Prediction

Weishao Tang, Mingcheng Lei, Yufei Zhang

cs.CE ·submitted 2026-11-17 11:46 UTC · v1

Abstract

Deep-learning surrogate models for aerodynamic flow prediction are efficient within the training distribution, but their accuracy often degrades sharply in out-of-distribution (OOD) scenarios. To improve OOD robustness for airfoil flow-field inference, this study proposes a residual-guided sequential inference framework to correct the unreliable local flow field. The framework consists of three Transformer-based components: a Flow Initializer for direct flow prediction, a Residual-based Corrector for high-residual regions, and a Shock-based Corrector for shock regions. The framework is evaluated on an engineering-oriented OOD test set built from CFD-based aerodynamic optimization trajectory. The proposed framework reduces the L1 error, CL error, and CD error by 30%, 59%, and 41%, respectively, relative to the usual single step Geo-to-Flow prediction. The additional iterative inference cost is only 0.25s per sample. These results demonstrate that the proposed framework provides an effective route for improving OOD robustness in airfoil surrogate modeling.

Closest papers

Nearest neighbours by meaning across the whole index.

VATO: A Vortex-Force-Aware Transformer Operator for Unsteady Separated Aerofoil Flows

cs.LG ·2026-09-01 ·Xingxin Yang, Zhan Zhang, Yichen Li, Juan Li
similarity 0.68
Abstract

Accurate prediction of unsteady separated flows is challenging because the aerodynamic loads depend on nonlinear separation and vortex-shedding dynamics. Although high-fidelity CFD resolves these mechanisms, its cost limits repeated use in design and control. Standard field-level surrogate training, however, does not distinguish the flow regions that contribute most strongly to the aerodynamic loads. We introduce VATO (Vortex-Force-Aware Transformer Operator), which couples the Vortex Force Map (VFM) method to a geometry-aware neural operator through two complementary mechanisms. VATO-S adds training-only supervision of the local VFM force-contribution field, with no increase in model size or inference cost. VATO-A uses VFM contribution and sensitivity fields to prioritise force-relevant source locations for residual cross attention. The methods are evaluated on unsteady CFD data for double-edged-plate aerofoils over 54 trajectories from nine geometries. Over lead times of 1-20~ms, VATO-S reduces velocity, pressure, and vorticity errors by 10.4\%, 1.0\%, and 15.6\%, respectively, while VATO-A achieves reductions of 15.8\%, 7.5\%, and 31.2\%. VATO-S gives the lowest VFM-derived drag error, whereas VATO-A gives the lowest pressure-derived lift and drag errors. Over lead times extending 50\% beyond the training range, VATO-A retains a 26.9\% reduction in vorticity error and larger improvements in all four force readouts, despite reduced gains in velocity and pressure. These results show that force-aware operator learning can improve both flow-field prediction and aerodynamic functional accuracy in unsteady separated flows.

0.28

A Residual Learning Approach for Unsteady Aerodynamic Load Prediction

cs.LG physics.flu-dyn ·2026-08-18 ·Divya Sanghi, Carlos E. S. Cesnik
benchmark similarity 0.67
Abstract · 27 pages, 21 figures, 9 Tables

This paper investigates the feasibility of using residual learning to improve unsteady aerodynamic load prediction for aeroelastic applications. The machine learning technique selected for the study is the long short-term memory (LSTM) neural network, which is used for its suitability for sequential data with aerodynamic memory effects. The approach is investigated for the NLR 7301 airfoil benchmark using high-fidelity CFD lift data for prescribed pitch and plunge motions in the transonic flow regime in the presence of shock motion. An analytical unsteady aerodynamic model based on the Wagner function is used as a physics-based baseline, and the neural network is trained to learn the difference between the CFD lift coefficient and the Wagner prediction. The residual model is compared with a direct neural-network model trained to predict the CFD lift coefficient. The comparison includes feature and normalization studies, external benchmark cases, and leave-one-out and leave-family-out generalization tests across a range of sinusoidal and non-sinusoidal motions. The residual model performs best when its inputs align with the Wagner formulation variables, generally giving lower error and more consistent performance across training runs, though the direct model remains more accurate for some high-frequency cases. The residual model also generalizes better in the leave-one-out and leave-family-out tests, with a smaller increase in error than the direct model when entire motion families are withheld from training. Overall, the results indicate that residual learning shows promise as a modular approach for augmenting classical low-order aerodynamic theories, especially when the physics baseline removes a structured part of the aerodynamic response and leaves a lower-variance correction for the neural network to learn.

0.35

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.66
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06

Neural Field Ensembles for Aerodynamic Surface Prediction: Winning Solution to the ONERA CRM Wall Distribution 2025 Challenge

cs.LG physics.flu-dyn ·2026-09-15 ·Lionel Salesses, Caroline Sainvitu, Tariq Benamara
similarity 0.66
Abstract

Machine-learning surrogate models offer a promising alternative to high-fidelity Computational Fluid Dynamics (CFD) simulations for aerodynamic analysis and design. However, constructing accurate surrogates for realistic aircraft configurations remain challenging due to complex geometries, multiple flow regimes, and limited training data. This work presents the methodology that achieved first place in the ONERA CRM Wall Distribution Regression Challenge, which focuses on predicting pressure and skin-friction coefficient distributions over the NASA Common Research Model wing-body-pylon-nacelle configuration under different operating conditions. The proposed approach formulates the problem as a conditional neural field mapping spatial coordinates, surface normals, and operating conditions to aerodynamic wall quantities. Fourier feature encoding, a relative squared error objective aligned with the challenge metric, ensemble learning, and $k$-fold cross-validation are progressively introduced to improve prediction accuracy and exploit the limited training data. Beyond presenting the final methodology, the paper documents the successive model design choices that led to the winning solution through a comprehensive ablation study and discusses several alternative approaches that were investigated but ultimately discarded. On the hidden competition test set, the proposed methodology achieves an overall score of 8.81, outperforming the strongest organizer-provided baseline, which achieved a score of 8.64, while requiring approximately three orders of magnitude fewer trainable parameters. These results illustrate that carefully designed coordinate-based neural fields constitute an efficient and robust framework for aerodynamic surrogate modeling on complex geometries under limited-data conditions.

0.13

A Data Fusion Framework for Grounding Aerospace Surrogate Model via Experimental Wind-Tunnel Observations

cs.LG ·2026-09-02 ·Nitin Nagesh Kulkarni, Dheeraj Vemula, Yin Yu, Peter Lyu, Juan J. Alonso
hot direction similarity 0.66
Abstract

Aerodynamic surrogate models trained on high-fidelity CFD data reproduce numerical predictions of both scalar outputs and entire fields accurately, yet their predictive fidelity is limited by systematic discrepancies between CFD and experimental observations. We present an experimentally grounded correction framework that adapts a CFD-trained deep learning surrogate using wind-tunnel PSP measurements. A Geotransolver surrogate trained on 2,300 high-fidelity CFD simulations of the NASA CRM wing-body configuration, spanning geometric variation, Mach 0.70-0.85, and angles of attack 0 to 4 degrees, reproduces the CFD integrated aerodynamic forces and pitching moment to R2 > 0.99 but does not match the experimental data. To incorporate experimental information without retraining the surrogate, a correction network is trained on spatially registered PSP measurements at two freestream Mach numbers (0.70 and 0.85) across the same angle-of-attack range, learning the discrepancy between the surrogate-predicted and experimentally measured surface-pressure distributions. At Mach 0.85 the correction substantially improves agreement with PSP, particularly at the wing suction peak, shock location, and subsequent pressure recovery, reducing both the magnitude of the prediction error and the fraction of wetted surface on which it exceeds 0.05 in Cp, and it does so from a limited experimental dataset without modifying the pretrained surrogate parameters. On held-out angles of attack the grounded surrogate agrees with measurement to within 2.3-2.7% of the measured Cp range, and outperforms direct interpolation between the measured conditions at every state tested. Experimental measurements can therefore ground a large-scale simulation-trained surrogate by learning systematic CFD-to-experiment discrepancies while preserving its generalization capability and computational efficiency.

0.29

Ground-Wing: A Parametric 3D Wing-in-Ground-Effect Dataset for Benchmarking Neural Surrogate Models

cs.LG ·2026-11-03 ·Andrea Cenzato, Lukas Karch, Andre Luckow, Yoran Pichon, Francesco Pasqua +4 more
benchmarkcode/data similarity 0.65
Abstract

This paper presents a CFD dataset of a highly parametrized 3D wing operating in ground effect, designed for benchmarking neural surrogate models for aerodynamic prediction, using a wing shape and flow conditions typically encountered in motorsport applications. The dataset comprises 770 RANS simulations of 194 unique wing configurations, sampled across 27 airfoil profile variants and 4 distances from the ground, spanning variations in wing sweep, chord, taper, angle of attack, and tip twist. Six neural network architectures representing distinct paradigms --- convolutional (DoMINO), graph-based (X-MeshGraphNet), transformer-based (AB-UPT, GeoTransolver, GAOT), and JEPA-based (AeroJEPA) --- are evaluated on their ability to predict surface pressure coefficient and wall shear stress distributions, from which integral drag and lift coefficients are recovered. The dataset is intended to be used as a challenging benchmark for surrogate CFD models, due to the uniqueness of the ground effect being absent from other wing and airfoil datasets. The dataset is available for download at https://huggingface.co/datasets/andreacenzato/Ground-Wing

0.21

CoPiT: A conditional Position-induced Transformer for aerodynamic field prediction on unstructured meshes

cs.LG physics.comp-phmath.NAphysics.flu-dyn ·2026-10-23 ·Junfeng Chen, Yongchen Fan, Zhonghua Qiao, Kailiang Wu
similarity 0.65
Abstract

High-fidelity Reynolds-averaged Navier--Stokes (RANS) simulations remain a standard tool for aerodynamic analysis, yet each solve on an unstructured mesh is computationally expensive, making many-query tasks such as design exploration, optimization, and multi-condition evaluation costly. Neural operators provide mesh-flexible surrogates for mapping geometry and operating conditions to flow fields; however, in many existing architectures, global parameters such as the freestream state and design variables are concatenated with pointwise inputs, leaving their influence on intermediate features implicit. This paper proposes CoPiT, a \textbf{Co}nditional \textbf{P}osition-induced \textbf{T}ransformer that builds on the Position-induced Transformer (PiT) as its geometric backbone and injects a global condition vector through multi-stage feature-wise linear modulation (FiLM), thereby making parametric modulation explicit while preserving geometry-based attention weights. The model is evaluated on two-dimensional AirfRANS airfoil fields, including scarce-data and extrapolation regimes, and on three-dimensional BlendedNet++ blended-wing-body surfaces. On the AirfRANS full-data test set, CoPiT reduces surface and volume losses by approximately 54\% and 24\% relative to Transolver, respectively, and achieves the lowest overall normalized test MSE among the compared baselines on BlendedNet++. Matched ablations show that FiLM conditioning generally improves upon input concatenation, while the preferred placement is task-dependent. CoPiT thus provides a practical operator-learning surrogate for parametric aerodynamics on unstructured meshes.

0.29

Wind-Informed Rapid Flight-Planning in Complex Urban Topologies via Machine Learning and Experimental Validation

cs.RO physics.flu-dyn ·2026-08-10 ·Peter I. Renn, Alejandro A. Stefan-Zavala, Julian Humml, Sabera Talukder, Aysha AlMazrouei +6 more
similarity 0.64
Abstract

Advanced air mobility operations hold the potential to enhance and expand regional transportation of both people and goods in populated areas. However, hazardous flight conditions arising from interactions between wind and the built environment remain a significant challenge for aerial vehicles in urban settings. This work proposes a novel framework towards safe flight planning of aerial vehicles in windy urban environments. A learning-based surrogate model is trained to rapidly predict flow fields from readily available information such as building geometry and incident wind. This surrogate prediction is used to calculate a volumetric flight challenge scalar field based on critical flow parameters and proximity to structures. A safe, flow-informed flight trajectory is then identified through a cost-minimizing pathfinder. The complete system is demonstrated experimentally through flight tests of a micro aerial vehicle through a model urban geometry placed in a large fan-array wind tunnel. Comparing this approach to trajectories generated without knowledge of the wind field, we find the flow-informed approach reduces undesired vehicle displacement and improves flight stability. This work is among the first practical demonstrations of safe, wind-aware methodologies for advanced air mobility in urban environments.

0.34