CS Paper Radar

A Residual Learning Approach for Unsteady Aerodynamic Load Prediction

Divya Sanghi, Carlos E. S. Cesnik

cs.LG physics.flu-dyn ·submitted 2026-08-18 15:26 UTC · v1
benchmark

Abstract

This paper investigates the feasibility of using residual learning to improve unsteady aerodynamic load prediction for aeroelastic applications. The machine learning technique selected for the study is the long short-term memory (LSTM) neural network, which is used for its suitability for sequential data with aerodynamic memory effects. The approach is investigated for the NLR 7301 airfoil benchmark using high-fidelity CFD lift data for prescribed pitch and plunge motions in the transonic flow regime in the presence of shock motion. An analytical unsteady aerodynamic model based on the Wagner function is used as a physics-based baseline, and the neural network is trained to learn the difference between the CFD lift coefficient and the Wagner prediction. The residual model is compared with a direct neural-network model trained to predict the CFD lift coefficient. The comparison includes feature and normalization studies, external benchmark cases, and leave-one-out and leave-family-out generalization tests across a range of sinusoidal and non-sinusoidal motions. The residual model performs best when its inputs align with the Wagner formulation variables, generally giving lower error and more consistent performance across training runs, though the direct model remains more accurate for some high-frequency cases. The residual model also generalizes better in the leave-one-out and leave-family-out tests, with a smaller increase in error than the direct model when entire motion families are withheld from training. Overall, the results indicate that residual learning shows promise as a modular approach for augmenting classical low-order aerodynamic theories, especially when the physics baseline removes a structured part of the aerodynamic response and leaves a lower-variance correction for the neural network to learn.

Comment
27 pages, 21 figures, 9 Tables

Closest papers

Nearest neighbours by meaning across the whole index.

Modelling non-linear aeroelastic loads in long-span bridges with extreme learning machines

cs.CE cs.LG ·2026-09-27 ·Gledson Rodrigo Tondo, Samir Chawdhury, Sergio Andres Castro Giraldo, Guido Morgenthal
publishedcode/data similarity 0.73
Abstract

Accurate modelling of aerodynamic loads is essential for predicting instabilities and ensuring the safety of long-span bridges. A methodology is introduced for modelling aerodynamic self-excited forces in bridge-deck cross-sections using extreme learning machines (ELMs). ELMs, as single-layer feedforward neural networks, offer efficient training and accurate predictions. Forced-oscillation datasets from computational fluid dynamics (CFD) or wind-tunnel experiments are used for training, enabling systematic data selection to capture non-linear aerodynamic behaviour often missed by semi-analytical approaches. Once trained, the model predicts self-excited loads for any arbitrary motion composed by frequencies and amplitudes within the training domain. Comparisons with analytical, semi-analytical, and CFD results show superior accuracy in capturing non-linear force components and close agreement for aerodynamic loads and flutter wind speeds. Training required about 1.1\% of the time of a conventional neural network, and coupled flutter analysis runs in seconds, providing orders-of-magnitude speed-ups over CFD. These results indicate that ELM-based frameworks are accurate, practical, and efficient alternatives for modelling self-excited loads, particularly when preliminary CFD or wind-tunnel data are available. The presented approach offers a reliable data-driven technique for aeroelastic load modelling in long-span bridges.

0.30

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.68
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06

Neural Field Ensembles for Aerodynamic Surface Prediction: Winning Solution to the ONERA CRM Wall Distribution 2025 Challenge

cs.LG physics.flu-dyn ·2026-09-15 ·Lionel Salesses, Caroline Sainvitu, Tariq Benamara
similarity 0.67
Abstract

Machine-learning surrogate models offer a promising alternative to high-fidelity Computational Fluid Dynamics (CFD) simulations for aerodynamic analysis and design. However, constructing accurate surrogates for realistic aircraft configurations remain challenging due to complex geometries, multiple flow regimes, and limited training data. This work presents the methodology that achieved first place in the ONERA CRM Wall Distribution Regression Challenge, which focuses on predicting pressure and skin-friction coefficient distributions over the NASA Common Research Model wing-body-pylon-nacelle configuration under different operating conditions. The proposed approach formulates the problem as a conditional neural field mapping spatial coordinates, surface normals, and operating conditions to aerodynamic wall quantities. Fourier feature encoding, a relative squared error objective aligned with the challenge metric, ensemble learning, and $k$-fold cross-validation are progressively introduced to improve prediction accuracy and exploit the limited training data. Beyond presenting the final methodology, the paper documents the successive model design choices that led to the winning solution through a comprehensive ablation study and discusses several alternative approaches that were investigated but ultimately discarded. On the hidden competition test set, the proposed methodology achieves an overall score of 8.81, outperforming the strongest organizer-provided baseline, which achieved a score of 8.64, while requiring approximately three orders of magnitude fewer trainable parameters. These results illustrate that carefully designed coordinate-based neural fields constitute an efficient and robust framework for aerodynamic surrogate modeling on complex geometries under limited-data conditions.

0.13

VATO: A Vortex-Force-Aware Transformer Operator for Unsteady Separated Aerofoil Flows

cs.LG ·2026-09-01 ·Xingxin Yang, Zhan Zhang, Yichen Li, Juan Li
similarity 0.67
Abstract

Accurate prediction of unsteady separated flows is challenging because the aerodynamic loads depend on nonlinear separation and vortex-shedding dynamics. Although high-fidelity CFD resolves these mechanisms, its cost limits repeated use in design and control. Standard field-level surrogate training, however, does not distinguish the flow regions that contribute most strongly to the aerodynamic loads. We introduce VATO (Vortex-Force-Aware Transformer Operator), which couples the Vortex Force Map (VFM) method to a geometry-aware neural operator through two complementary mechanisms. VATO-S adds training-only supervision of the local VFM force-contribution field, with no increase in model size or inference cost. VATO-A uses VFM contribution and sensitivity fields to prioritise force-relevant source locations for residual cross attention. The methods are evaluated on unsteady CFD data for double-edged-plate aerofoils over 54 trajectories from nine geometries. Over lead times of 1-20~ms, VATO-S reduces velocity, pressure, and vorticity errors by 10.4\%, 1.0\%, and 15.6\%, respectively, while VATO-A achieves reductions of 15.8\%, 7.5\%, and 31.2\%. VATO-S gives the lowest VFM-derived drag error, whereas VATO-A gives the lowest pressure-derived lift and drag errors. Over lead times extending 50\% beyond the training range, VATO-A retains a 26.9\% reduction in vorticity error and larger improvements in all four force readouts, despite reduced gains in velocity and pressure. These results show that force-aware operator learning can improve both flow-field prediction and aerodynamic functional accuracy in unsteady separated flows.

0.28

Ground-Wing: A Parametric 3D Wing-in-Ground-Effect Dataset for Benchmarking Neural Surrogate Models

cs.LG ·2026-11-03 ·Andrea Cenzato, Lukas Karch, Andre Luckow, Yoran Pichon, Francesco Pasqua +4 more
benchmarkcode/data similarity 0.67
Abstract

This paper presents a CFD dataset of a highly parametrized 3D wing operating in ground effect, designed for benchmarking neural surrogate models for aerodynamic prediction, using a wing shape and flow conditions typically encountered in motorsport applications. The dataset comprises 770 RANS simulations of 194 unique wing configurations, sampled across 27 airfoil profile variants and 4 distances from the ground, spanning variations in wing sweep, chord, taper, angle of attack, and tip twist. Six neural network architectures representing distinct paradigms --- convolutional (DoMINO), graph-based (X-MeshGraphNet), transformer-based (AB-UPT, GeoTransolver, GAOT), and JEPA-based (AeroJEPA) --- are evaluated on their ability to predict surface pressure coefficient and wall shear stress distributions, from which integral drag and lift coefficients are recovered. The dataset is intended to be used as a challenging benchmark for surrogate CFD models, due to the uniqueness of the ground effect being absent from other wing and airfoil datasets. The dataset is available for download at https://huggingface.co/datasets/andreacenzato/Ground-Wing

0.21

Residual-Guided Multi-Step Conditional Generation for Fast Airfoil Flow Field Prediction

cs.CE ·2026-11-17 ·Weishao Tang, Mingcheng Lei, Yufei Zhang
similarity 0.67
Abstract

Deep-learning surrogate models for aerodynamic flow prediction are efficient within the training distribution, but their accuracy often degrades sharply in out-of-distribution (OOD) scenarios. To improve OOD robustness for airfoil flow-field inference, this study proposes a residual-guided sequential inference framework to correct the unreliable local flow field. The framework consists of three Transformer-based components: a Flow Initializer for direct flow prediction, a Residual-based Corrector for high-residual regions, and a Shock-based Corrector for shock regions. The framework is evaluated on an engineering-oriented OOD test set built from CFD-based aerodynamic optimization trajectory. The proposed framework reduces the L1 error, CL error, and CD error by 30%, 59%, and 41%, respectively, relative to the usual single step Geo-to-Flow prediction. The additional iterative inference cost is only 0.25s per sample. These results demonstrate that the proposed framework provides an effective route for improving OOD robustness in airfoil surrogate modeling.

0.13

Periodic Neural Mapping for Unsteady Rotor-Blade Pressure and Aeroelastic Load Prediction

cs.LG physics.flu-dyn ·2026-09-18 ·Lionel Salesses, Joachim Dominique, Tariq Benamara, Théo Flament, Franck Mastrippolito
similarity 0.64
Abstract

Accurate prediction of unsteady aerodynamic loads remains a major challenge in turbomachinery design. High-fidelity Computational Fluid Dynamics (CFD) simulations are expensive, while aeroelastic Quantities of Interest (QoI) depend sensitively on the temporal evolution of the pressure field. This work introduces periodic Fourier Neural Mapping (p-FNM), a neural-operator framework for predicting unsteady pressure distributions on turbine rotor blades simulated using the chorochronic numerical hypothesis. The architecture embeds temporal periodicity into the model and learns a continuous mapping from operating conditions and time to pressure fields. Unlike sequential latent-space approaches, p-FNM predicts pressure fields independently at any time, avoiding error accumulation while preserving temporal continuity. The model is evaluated on a database of unsteady rotor-blade simulations and compared with a reduced-order baseline based on a variational autoencoder and recurrent neural network, refered as the Temporal Prediction Model (TPM). Performance is assessed for pressure fields and Generalized Aerodynamic Forces (GAFs), the primary aeroelastic QoI. Across all training datasets, p-FNM consistently outperforms TPM. On the largest dataset, p-FNM achieves a pressure-field mean absolute percentage error of 0.46% and a GAF-magnitude prediction error of 4.42%, corresponding to improvements of 60.7% and 77.6%, respectively. The minimum weighted phase error reaches 0.060 rad, demonstrating accurate preservation of the temporal characteristics of the aerodynamic response. The results show that GAF prediction is more challenging than pressure-field prediction and that temporal coherence is critical for accurately predicting spectral aerodynamic quantities. These findings demonstrate the potential of periodic neural operators for reduced-order modeling and aeroelastic analysis in turbomachinery.

0.20

A panoramic aerodynamic performance prediction method for turbomachinery cascades using transformer-enhanced neural operator

cs.LG physics.comp-phphysics.flu-dyn ·2026-09-13 ·Qineng Wang, Zhendong Guo, Liming Song, Tianyuan Liu
publishedhighly cited similarity 0.64
Abstract · Author manuscript updated to align core methods and results with the published article; 41 pages, 20 figures, 14 tables

To enable flexible and rapid aerodynamic performance evaluation in turbomachinery design, this paper proposes a panoramic performance prediction framework. Unlike most previous prediction models that directly predict the objective functions of interest, our approach first predicts the basic parameters of the Navier-Stokes equations, such as temperature, pressure, and density. Utilizing these basic physical quantities, it subsequently predicts key performance parameters of the turbine stage meridian plane. By adopting this methodology, our proposed panoramic performance prediction framework functions similarly to a CFD simulator, capable of predicting various objective of interest to the designers. To enhance prediction accuracy, a transformer-enhanced neural operator (TNO) is introduced within this framework. Using the Rotor 37 blades as a reference, the proposed TNO is trained to predict the performance of a transonic compressor blade in the meridian plane. The TNO can accurately predict total quantities such as isentropic efficiency, mass flow, and distributions of total pressure ratio. Remarkably, the prediction error of TNO is observed to be smaller than that of state-of-the-art deep learning operators such as the FNO and DeepONet. Furthermore, the TNO is applied to downstream tasks, including sensitivity analysis and optimization of various objective functions. The results confirm that the TNO can operate almost like a CFD simulator, while reducing the computational cost of downstream tasks by four orders of magnitude. The effectiveness and reliability of the proposed TNO for solving different kinds of downstream tasks have been well demonstrated.

0.63