CS Paper Radar

VATO: A Vortex-Force-Aware Transformer Operator for Unsteady Separated Aerofoil Flows

Xingxin Yang, Zhan Zhang, Yichen Li, Juan Li

cs.LG ·submitted 2026-09-01 00:17 UTC · v1

Abstract

Accurate prediction of unsteady separated flows is challenging because the aerodynamic loads depend on nonlinear separation and vortex-shedding dynamics. Although high-fidelity CFD resolves these mechanisms, its cost limits repeated use in design and control. Standard field-level surrogate training, however, does not distinguish the flow regions that contribute most strongly to the aerodynamic loads. We introduce VATO (Vortex-Force-Aware Transformer Operator), which couples the Vortex Force Map (VFM) method to a geometry-aware neural operator through two complementary mechanisms. VATO-S adds training-only supervision of the local VFM force-contribution field, with no increase in model size or inference cost. VATO-A uses VFM contribution and sensitivity fields to prioritise force-relevant source locations for residual cross attention. The methods are evaluated on unsteady CFD data for double-edged-plate aerofoils over 54 trajectories from nine geometries. Over lead times of 1-20~ms, VATO-S reduces velocity, pressure, and vorticity errors by 10.4\%, 1.0\%, and 15.6\%, respectively, while VATO-A achieves reductions of 15.8\%, 7.5\%, and 31.2\%. VATO-S gives the lowest VFM-derived drag error, whereas VATO-A gives the lowest pressure-derived lift and drag errors. Over lead times extending 50\% beyond the training range, VATO-A retains a 26.9\% reduction in vorticity error and larger improvements in all four force readouts, despite reduced gains in velocity and pressure. These results show that force-aware operator learning can improve both flow-field prediction and aerodynamic functional accuracy in unsteady separated flows.

Closest papers

Nearest neighbours by meaning across the whole index.

Airfoil2Vec: Spectral Geometry-Conditioned Neural Surrogate Models for Airfoil Aerodynamics and a Downforce-Generating CFD Dataset

cs.LG physics.flu-dyn ·2026-09-25 ·Haitz Sáez de Ocáriz Borde, Flavio Savarino, Andrei Cristian Popescu, Pietro Innocenzi, Pantelis Papageorgiou +1 more
datasetcode/data similarity 0.68
Abstract

We introduce a dataset of approximately 10,000 Reynolds-Averaged Navier-Stokes (RANS) simulations of steady, incompressible, two-dimensional subsonic flow around downforce-generating NACA 4-digit airfoils, targeting aerodynamic regimes relevant to automotive and motorsport applications (openly available on https://huggingface.co/datasets/ratiolabs/downforce-airfoils). Using this resource, we study geometry-conditioned neural surrogates for fast flow prediction, comparing neural fields with neural ODEs, MLPs with graph-based models, and several spectral geometry-conditioning methods. We further propose Airfoil2Vec, an airfoil-specific spectral geometry encoder that combines the joint contour spectrum with separate spectral representations of camber and thickness, for predicting continuous pressure and velocity fields. We evaluate generalization through angle-of-attack interpolation, interpolation and extrapolation to unseen NACA 4-digit geometries, and generalization to unseen non-NACA airfoils. The resulting surrogate accurately captures aerodynamic quantities and qualitative flow features while providing orders-of-magnitude speedups over conventional computational fluid dynamics.

0.21

Residual-Guided Multi-Step Conditional Generation for Fast Airfoil Flow Field Prediction

cs.CE ·2026-11-17 ·Weishao Tang, Mingcheng Lei, Yufei Zhang
similarity 0.68
Abstract

Deep-learning surrogate models for aerodynamic flow prediction are efficient within the training distribution, but their accuracy often degrades sharply in out-of-distribution (OOD) scenarios. To improve OOD robustness for airfoil flow-field inference, this study proposes a residual-guided sequential inference framework to correct the unreliable local flow field. The framework consists of three Transformer-based components: a Flow Initializer for direct flow prediction, a Residual-based Corrector for high-residual regions, and a Shock-based Corrector for shock regions. The framework is evaluated on an engineering-oriented OOD test set built from CFD-based aerodynamic optimization trajectory. The proposed framework reduces the L1 error, CL error, and CD error by 30%, 59%, and 41%, respectively, relative to the usual single step Geo-to-Flow prediction. The additional iterative inference cost is only 0.25s per sample. These results demonstrate that the proposed framework provides an effective route for improving OOD robustness in airfoil surrogate modeling.

0.10

CoPiT: A conditional Position-induced Transformer for aerodynamic field prediction on unstructured meshes

cs.LG physics.comp-phmath.NAphysics.flu-dyn ·2026-10-23 ·Junfeng Chen, Yongchen Fan, Zhonghua Qiao, Kailiang Wu
similarity 0.67
Abstract

High-fidelity Reynolds-averaged Navier--Stokes (RANS) simulations remain a standard tool for aerodynamic analysis, yet each solve on an unstructured mesh is computationally expensive, making many-query tasks such as design exploration, optimization, and multi-condition evaluation costly. Neural operators provide mesh-flexible surrogates for mapping geometry and operating conditions to flow fields; however, in many existing architectures, global parameters such as the freestream state and design variables are concatenated with pointwise inputs, leaving their influence on intermediate features implicit. This paper proposes CoPiT, a \textbf{Co}nditional \textbf{P}osition-induced \textbf{T}ransformer that builds on the Position-induced Transformer (PiT) as its geometric backbone and injects a global condition vector through multi-stage feature-wise linear modulation (FiLM), thereby making parametric modulation explicit while preserving geometry-based attention weights. The model is evaluated on two-dimensional AirfRANS airfoil fields, including scarce-data and extrapolation regimes, and on three-dimensional BlendedNet++ blended-wing-body surfaces. On the AirfRANS full-data test set, CoPiT reduces surface and volume losses by approximately 54\% and 24\% relative to Transolver, respectively, and achieves the lowest overall normalized test MSE among the compared baselines on BlendedNet++. Matched ablations show that FiLM conditioning generally improves upon input concatenation, while the preferred placement is task-dependent. CoPiT thus provides a practical operator-learning surrogate for parametric aerodynamics on unstructured meshes.

0.29

A Residual Learning Approach for Unsteady Aerodynamic Load Prediction

cs.LG physics.flu-dyn ·2026-08-18 ·Divya Sanghi, Carlos E. S. Cesnik
benchmark similarity 0.67
Abstract · 27 pages, 21 figures, 9 Tables

This paper investigates the feasibility of using residual learning to improve unsteady aerodynamic load prediction for aeroelastic applications. The machine learning technique selected for the study is the long short-term memory (LSTM) neural network, which is used for its suitability for sequential data with aerodynamic memory effects. The approach is investigated for the NLR 7301 airfoil benchmark using high-fidelity CFD lift data for prescribed pitch and plunge motions in the transonic flow regime in the presence of shock motion. An analytical unsteady aerodynamic model based on the Wagner function is used as a physics-based baseline, and the neural network is trained to learn the difference between the CFD lift coefficient and the Wagner prediction. The residual model is compared with a direct neural-network model trained to predict the CFD lift coefficient. The comparison includes feature and normalization studies, external benchmark cases, and leave-one-out and leave-family-out generalization tests across a range of sinusoidal and non-sinusoidal motions. The residual model performs best when its inputs align with the Wagner formulation variables, generally giving lower error and more consistent performance across training runs, though the direct model remains more accurate for some high-frequency cases. The residual model also generalizes better in the leave-one-out and leave-family-out tests, with a smaller increase in error than the direct model when entire motion families are withheld from training. Overall, the results indicate that residual learning shows promise as a modular approach for augmenting classical low-order aerodynamic theories, especially when the physics baseline removes a structured part of the aerodynamic response and leaves a lower-variance correction for the neural network to learn.

0.35

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.66
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06

A Data Fusion Framework for Grounding Aerospace Surrogate Model via Experimental Wind-Tunnel Observations

cs.LG ·2026-09-02 ·Nitin Nagesh Kulkarni, Dheeraj Vemula, Yin Yu, Peter Lyu, Juan J. Alonso
hot direction similarity 0.66
Abstract

Aerodynamic surrogate models trained on high-fidelity CFD data reproduce numerical predictions of both scalar outputs and entire fields accurately, yet their predictive fidelity is limited by systematic discrepancies between CFD and experimental observations. We present an experimentally grounded correction framework that adapts a CFD-trained deep learning surrogate using wind-tunnel PSP measurements. A Geotransolver surrogate trained on 2,300 high-fidelity CFD simulations of the NASA CRM wing-body configuration, spanning geometric variation, Mach 0.70-0.85, and angles of attack 0 to 4 degrees, reproduces the CFD integrated aerodynamic forces and pitching moment to R2 > 0.99 but does not match the experimental data. To incorporate experimental information without retraining the surrogate, a correction network is trained on spatially registered PSP measurements at two freestream Mach numbers (0.70 and 0.85) across the same angle-of-attack range, learning the discrepancy between the surrogate-predicted and experimentally measured surface-pressure distributions. At Mach 0.85 the correction substantially improves agreement with PSP, particularly at the wing suction peak, shock location, and subsequent pressure recovery, reducing both the magnitude of the prediction error and the fraction of wetted surface on which it exceeds 0.05 in Cp, and it does so from a limited experimental dataset without modifying the pretrained surrogate parameters. On held-out angles of attack the grounded surrogate agrees with measurement to within 2.3-2.7% of the measured Cp range, and outperforms direct interpolation between the measured conditions at every state tested. Experimental measurements can therefore ground a large-scale simulation-trained surrogate by learning systematic CFD-to-experiment discrepancies while preserving its generalization capability and computational efficiency.

0.29

Measuring and Improving Transfer of Neural Surrogates for Vehicle Aerodynamics

cs.LG physics.flu-dyn ·2026-11-18 ·Favour Nerrise, Julian Busch, Gurpreet Singh Hora, Martin Sipka, Danielle C. Maddix +1 more
theory similarity 0.66
Abstract · 23 pages, 5 figures, 13 tables

Neural surrogates for external vehicle aerodynamics are fast alternatives to physics-based computational fluid dynamics (CFD) simulations. Their foundational limitation is a lack of zero-shot generalization across vehicle classes, which results in an expensive, custom training campaign for each new vehicle design. Similar to pretrained models in other fields, a pretrained surrogate should adapt to a new vehicle class using only a few simulations and stay accurate on its pretraining domain. No prior study has systematically tested this transfer behavior. We conduct a large-scale, controlled benchmarking study on five DrivAerML-pretrained surrogates across four independent target datasets. These datasets differ from the source in geometry, CFD solver, turbulence model, and flow conditions. We find that fine-tuning these surrogates outperforms training from scratch in fewer than half of the comparisons and lowers the accuracy of the surrogate on its source dataset. We introduce GeoReplay, a geometry- and gradient-aligned source replay that keeps source simulations resembling the target in training and applies their updates only when they agree with the target gradient. A risk bound separates geometric coverage from differences in the simulated physics, and we prove that every sufficiently small GeoReplay step decreases the target training objective. GeoReplay lowers the source error of fine-tuning in 77 of 80 settings and matches its target accuracy.

0.15

Ground-Wing: A Parametric 3D Wing-in-Ground-Effect Dataset for Benchmarking Neural Surrogate Models

cs.LG ·2026-11-03 ·Andrea Cenzato, Lukas Karch, Andre Luckow, Yoran Pichon, Francesco Pasqua +4 more
benchmarkcode/data similarity 0.64
Abstract

This paper presents a CFD dataset of a highly parametrized 3D wing operating in ground effect, designed for benchmarking neural surrogate models for aerodynamic prediction, using a wing shape and flow conditions typically encountered in motorsport applications. The dataset comprises 770 RANS simulations of 194 unique wing configurations, sampled across 27 airfoil profile variants and 4 distances from the ground, spanning variations in wing sweep, chord, taper, angle of attack, and tip twist. Six neural network architectures representing distinct paradigms --- convolutional (DoMINO), graph-based (X-MeshGraphNet), transformer-based (AB-UPT, GeoTransolver, GAOT), and JEPA-based (AeroJEPA) --- are evaluated on their ability to predict surface pressure coefficient and wall shear stress distributions, from which integral drag and lift coefficients are recovered. The dataset is intended to be used as a challenging benchmark for surrogate CFD models, due to the uniqueness of the ground effect being absent from other wing and airfoil datasets. The dataset is available for download at https://huggingface.co/datasets/andreacenzato/Ground-Wing

0.21