CS Paper Radar

Physics-Informed Identification of Tensegrity Prestress across Taut-Slack Transitions

Sandesh Lamsal, Sumit Kumar, Rubi Bhandari, Subhamoy Sen, Andrzej Rutkiewicz, Leszek Małyszko, Landolf Rhode-Barbarigos

cs.LG cs.CEeess.SPphysics.flu-dyn ·submitted 2026-11-02 21:50 UTC · v1

Abstract

Prestress governs the stability, stiffness, and dynamic behavior of tensegrity structures, but it is not directly observable from sparse structural measurements, and it may decrease during service life. Under strong excitation, the cables may slacken and the dynamics become nonsmooth. Existing identification methods are limited to the taut regime, and physics-informed networks for tensegrities solve only the forward problem of predicting the response from known member parameters. This study formulates the inverse problem. Neural networks are trained on the equation-of-motion residual in constrained Cartesian coordinates, where the mass matrix is constant and the force densities enter linearly. The force densities, damping, and axial stiffness are trainable parameters, and the tension-only cable law is kept. A Fisher-information analysis shows, before inversion, which member parameters a record can determine. The method is tested on simulated planar tensegrity frames with up to five modules and a three-dimensional prism, and on measured records of a biomimetic leg and a full-scale tensegrity simplex. On the one-module frame, the identifiable force densities are recovered within 1.5% from noisy accelerations at half the free coordinates, on records with and without taut-slack transitions. Records with transitions determine members that taut records leave undetermined. On the five-module frame, a 16-cable two-span bridge, the median force-density error rises moderately, to 4.2%. On measured records, an identified spring stiffness is within 0.1% of its independently measured value on average, and the identified simplex prestress at 13 levels agrees with its cable force transducers to 2.9% root-mean-square.

Comment
44 pages, 15 figures, 15 tables; supplementary material included

Closest papers

Nearest neighbours by meaning across the whole index.

A Differentiable Framework for Inverse Identification of Heterogeneous Cohesive Laws

cs.CE physics.comp-ph ·2026-10-24 ·Sida Hao, Jinkyo Han, Bahador Bahmani
similarity 0.61
Abstract

This work develops a differentiable finite element framework based on an intrinsic cohesive-zone formulation for identifying traction-separation laws from global force-displacement histories and spatially sparse strain measurements. The framework employs physics-constrained neural networks to represent flexible, thermodynamically structured cohesive laws, with sensitivities computed through automatic differentiation and a discrete adjoint that accounts for the history-dependent evolution of interfacial damage. To enable identification of spatially heterogeneous cohesive behavior, we extend learned constitutive priors to irreversible interfacial damage by constructing a shared, low-dimensional family of cohesive laws from representative traction-separation histories. This representation exploits common constitutive structure and parameter sharing to reduce the number of unknowns and regularize the inverse problem, while allowing local cohesive behavior to vary spatially through latent coordinates. Numerical investigations involving double-cantilever beams and fiber-matrix composites demonstrate that accurate reproduction of global force-displacement responses does not necessarily imply accurate recovery of the underlying cohesive laws. Incorporating spatially resolved strain measurements substantially improves constitutive identification, even when the admissible responses are constrained by a learned prior. Comparisons with conventional bilinear cohesive models and Bayesian optimization further illustrate the benefits of the learned constitutive representation and adjoint-based identification for high-dimensional inverse problems.

0.20

Reduced-Order Physics-Informed Neural Network with Adaptive Basis Refinement for Structural Identification

cs.CE physics.comp-ph ·2026-08-17 ·Rui Zhang, Konstantinos Vlachas, Eleni Chatzi
similarity 0.60
Abstract

Physics-informed neural networks (PINNs) provide a flexible framework for solving forward and inverse problems. However, their direct application to structural dynamics remains limited by high system dimensionality and model-form errors arising from incomplete physics. Reduced-order models (ROMs) can alleviate the dimensionality bottleneck, yet existing PINN-ROM couplings typically rely on fixed reduced subspaces, target forward simulations, or assume complete physics, restricting their use for inverse identification under parametric variability or incomplete system knowledge. To address these limitations, this work proposes a Reduced-Order Physics-Informed Neural Network (RO-PINN) framework with adaptive basis refinement for structural identification under known and incomplete physics. Via projection, reduced governing equations are embedded directly into the PINN loss, facilitating learning in a low-dimensional latent space. An adaptive scheme updates the projection basis during training so that the latent space is progressively realigned with evolving structural parameters or learned residual restoring forces. This realignment reduces basis-mismatch errors and limits their influence on the inferred residual force. The method is validated on a four-story steel frame with nonlinear hysteretic braces under sparse and noisy measurements. Results show parameter identification comparable to or more accurate than Bayesian model updating with lower computational cost in the considered cases, recovery of unmodeled nonlinear restoring forces under incomplete physics, and joint identification of residual restoring forces and structural parameters within the same framework. Overall, RO-PINN provides a unified framework for structural identification by integrating reduced-order modeling, adaptive basis refinement, and physics-informed learning within a single formulation.

0.34

AFT Neural Function Approximators for 1D Nonlinear Force Laws

cs.CE cs.LGmath.DS ·2026-09-24 ·Miriam Goldack, Johann Groß, Malte Krack, Merten Stender
similarity 0.59
Abstract · 20 pages, 6 figures, 6 tables

Nonlinear contacts and friction strongly influence the vibration response of assembled structures, but their accurate numerical treatment is computationally demanding. The harmonic balance method is widely used to compute periodic steady-state responses, yet the required alternating frequency-time scheme becomes costly for nonsmooth and hysteretic nonlinearities and must be repeated throughout the nonlinear solution process. Here we show that this procedure can be replaced by neural networks that directly map displacement Fourier coefficients to nonlinear force coefficients and provide the corresponding Jacobian through automatic differentiation. The surrounding solver and continuation algorithms remain unchanged for the computation of frequency response curves. The neural networks exclusively learn individual nonlinear elements rather than complete system responses. Physics-based nondimensionalization and phase normalization facilitate the learning process and enable a single trained network to cover a wide range of parameter combinations. Building on the cubic spring, unilateral spring, and Jenkins elements considered here, the approach points toward a reusable library of nonlinear-element surrogates that can be combined in arbitrary number and location within a mechanical system. By bypassing the iterative force evaluation in time domain, the method offers favorable computational scaling for high-resolution analyses and systems with many nonlinear elements.

0.30

Calibration of neural viscoelastic models via full-field data

cs.CE ·2026-09-03 ·Brain M. Riemer, Markus Kästner, Karl A. Kalina
similarity 0.58
Abstract

We propose an unsupervised learning framework for calibrating a physics-augmented neural network (PANN) for small-strain viscoelasticity via full-field data. It only requires quantities that are directly accessible in real experiments for training, namely global reaction forces and surface displacements. The underlying PANN is embedded in the generalized standard materials theory, in which two scalar-valued potentials render the constitutive model thermodynamically consistent by construction, while invariant-based representations of the free energy and the dual dissipation potential additionally ensure material symmetry. Considering a thin specimen under the plane stress assumption, we formulate a constrained optimization problem based on the equilibrium gap method in combination with quasi-Newton optimizers and automatic differentiation. Thereby, the unknown out-of-plane strain follows from the plane stress condition and the evolution of the internal variables is captured by an implicit time integration scheme. The resulting system of nonlinear equations is solved via a local Newton iteration at quadrature point and time step. To drastically reduce the computational cost of training, the backward adjoint method is employed to compute the gradient of the target loss, instead of backpropagating through all Newton iteration steps. The proposed framework is demonstrated for synthetic data, including noisy displacements and forces, showing excellent agreement across a wide range of deformation rates and load paths.

0.43

Learning Stiffness Dependent Fluid Structure Dynamics from Coarse Flow Representations

cs.AI physics.flu-dyn ·2026-09-19 ·Chun-Jun Pu, Li-Wei Chen, Hai-Bo Huang
similarity 0.57
Abstract

This paper develops a data-driven framework for long-term prediction of fluid--structure interaction (FSI) dynamics, focusing on the flow-induced vibration (FIV) of a flexible plate. A stiffness-conditioned neural evolution operator jointly represents the Eulerian flow field and Lagrangian structural state. The plate is represented by 101 ordered structural tokens carrying nodal coordinates and velocities, with nondimensional bending stiffness as a global conditioning variable. Bidirectional cross-attention couples fluid and structural representations within a hybrid CNN-Transformer architecture. Trained with staged multi-step autoregressive rollouts and symmetry-reflected trajectories, a single operator captures three stiffness-dependent response regimes: deflected--flapping, deflected, and flapping. The predicted trajectories preserve the principal flow structures, structural oscillations, and dominant frequencies, while blind 1000-step rollouts remain bounded. The operator also interpolates to stiffness values excluded from training. To reduce sensitivity to under-resolved near-wall gradients in force reconstruction, we develop a differentiable aerodynamic-force module based on the derivative-moment transformation (DMT). Conventional wall-stress surface integrals are replaced by an enclosed 2D curve integral around the core vortex region, enabling accurate reconstruction of lift and drag. A Signed Distance Function (SDF) and smoothed Dirac-delta formulation make the integration fully differentiable while preserving gradient flow. The proposed framework provides an accurate and differentiable surrogate for stiffness-dependent FSI dynamics, enabling efficient parameter studies and future stiffness optimization for flow-energy-harvesting applications.

0.25

History-informed Lagrangian Neural Networks

cs.LG ·2026-08-13 ·Tianshuo Zhang, Xianglei Xing, Wenzhe Zhai, Jia Gao, He Cao
publishedcode/data similarity 0.56
Abstract · 15 pages, 5 figures. Accepted to the 9th Chinese Conference on Pattern Recognition and Computer Vision (PRCV 2026) as an oral paper

Forecasting the long-horizon evolution of mechanical systems from position-only observations is a pivotal yet difficult task, as hidden velocities and trajectory-specific physical properties must be inferred simultaneously. Although physics-guided neural networks like Lagrangian Neural Networks (LNNs) guarantee physical plausibility, they generally require complete state inputs and lack adaptability to changing system parameters. To break these limitations, we introduce History-informed Lagrangian Neural Networks (HiLNN). Grounded in the insight that temporal position sequences implicitly encode underlying dynamics, HiLNN employs a recurrent encoder to extract a latent context from history. This context not only reconstructs the unobserved initial velocity but also adaptively modulates the mass matrix, potential energy, and damping coefficients of a structured Lagrangian system. By leveraging a differentiable RK4 rollout scheme, the entire pipeline is optimized end-to-end under multi-step trajectory supervision and energy-consistency regularization. Empirical evaluations across conservative, dissipative, and heterogeneous variable-parameter systems show that HiLNN delivers superior long-term prediction accuracy and maintains precise energy profiles compared to state-of-the-art baselines. The source code is publicly available at https://github.com/yingtian22/History-informed-LNN.

0.77

Dissipative Lagrangian Neural Networks for the Interpretable Modelling of Passive Mechanical Systems

cs.LG cs.CE ·2026-10-11 ·Rob Seabourne, Alice Cicirello
similarity 0.56
Abstract

In this paper, we propose the Dissipative Lagrangian Neural Network (dLNN), a continuous-time system identification technique that separately learns the conservative and dissipative dynamics of a mechanical system directly from data. A key contribution is a novel parametrisation of dissipative forces that (i) is structurally constrained to be dissipative, enforcing passivity of the learned model, (ii) cannot absorb conservative mechanics, and (iii) retains sufficient expressivity to represent a broad family of state-dependent damping and regularised friction forces. The model is validated on prediction tasks on two real-world mechanical systems: trajectory prediction of a chaotic double pendulum and inverse-dynamics modelling of a six-degree-of-freedom industrial robot. Across these tasks, the dLNN demonstrates improved predictive performance over existing Lagrangian architectures while remaining competitive with a black-box neural model. The imposed physical structure also improves generalisation to unseen states, with the benefits becoming particularly pronounced when training data is limited. Finally, we introduce a symbolic distillation procedure that extracts closed-form expressions from the learned physical components. Applied to the industrial robot, this produces interpretable symbolic models that retain high predictive accuracy while reducing the computational overhead associated with evaluating neural Lagrangian models.

0.08

Constitutive State-Space Modeling of Path-Dependent Plasticity: A Resolution-Consistent and Parallelizable Computational Framework

cs.LG math.NAphysics.comp-ph ·2026-09-07 ·Rui Barreira, Taylan Soydan, Francesco Scipione, Miguel A. Bessa, Dirk Mohr
similarity 0.55
Abstract

Data-driven constitutive models for path-dependent plasticity are commonly formulated using nonlinear recurrent neural networks, whose sequential state evolution limits parallel training and whose predictions may depend on the discretization of the applied strain path. We introduce a Constitutive State Space (CSS) model that reformulates structured state-space dynamics as an incremental constitutive operator. The strain increment is decomposed into magnitude and direction: the loading direction drives the latent state-space system, while the increment magnitude enters the zero-order-hold discretization of its continuous-time linear recurrence. This mechanics-tailored construction guarantees stationarity under zero increments, strongly reduces sensitivity to strain-path resolution, and retains the parallel-scan structure of S5 for efficient training on long constitutive histories. The CSS and Minimal State Cell (MSC) architectures are compared for four multiaxial path-dependent material models including isotropic J2 plasticity, pressure-sensitive foam plasticity, and combined isotropic-kinematic hardening. CSS matches or exceeds the prediction accuracy of the MSC, including one order of magnitude lower validation losses for the plastically incompressible materials. Importantly, CSS maintains low errors across large changes in strain-path discretization, whereas the MSC error increases substantially when evaluated at coarser resolutions than used for training. CSS trains substantially faster and requires fewer strain-stress pairs to attain comparable or better accuracy. Analysis of the learned state further reveals latent structure consistent with the dimensionality of the underlying physical constitutive models. These results establish mechanics-tailored structured state-space dynamics as a computational framework for efficient and discretization-robust data-driven constitutive modeling.

0.08