CS Paper Radar

A multi-resolution spectrogram approach for estimating the physical parameters of a plate reverb

Jared Lipkin, Meiying Chen, Benjamin R. Thompson, Andrea Cogliati, David A. Anderson, Michael C. Heilemann

eess.AS ·submitted 2026-09-23 16:01 UTC · v1
published

Abstract

The ResNet-18 image classification model is employed to determine the physical parameters of a plate reverb from a recording of the impulse response. The model is adapted to derive parameters using normalized and downsampled multi-resolution spectrograms computed from the provided impulse responses (IRs). To refine the prediction of the output location, the spectral phase response is also included as an additional input channel to the network since multiple output locations can give the same magnitude response for high-order resonant modes. On a 5000 IR validation set, our model achieves an average normalized mean squared error (NMSE) of 0.02920 across all parameters, with the lowest average NMSE occurring for parameters yo (0.00228), Ly (0.00347), and xo (0.00574).

Comment
Parameter Estimation Challenge, Task A
Journal ref
Proc. 29th Int. Conf. Digital Audio Effects (DAFx26), 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Count-Density Networks for Modal Plate Parameter Estimation

eess.AS ·2026-11-01 ·Rodrigo Diaz, Pablo Tablas De Paula, David Marttila, Ilias Ibnyahya, Chin-Yun Yu
publishedcode/data similarity 0.60
Abstract · 3 pages, 1 figure, 1 table. DAFx26 Parameter Estimation Challenge, Task B. Code: https://github.com/davidmarttila/dafx_challenge

We describe two submissions to Task B of the 1st DAFx Parameter Estimation Challenge, which estimates an unknown number of modal frequency, decay, and gain triples from a synthetic plate-reverb impulse response. The first method combines pooled spectral features with time-domain and absolute-scale conditioning in a real-valued convolutional count-density network, while the second uses a complex-valued Transformer count-density network. Both methods jointly infer the modal count and per-mode attributes directly from the IR. On an independently generated 100-IR comparison set, the two neural estimators achieve lower overall challenge error than the evaluated classical baselines, with frequency and decay estimation substantially more accurate than gain estimation.

0.48

Accurate Plate Reverb Parameter Estimation Using Two-Stage Evolutionary Search

eess.AS cs.SDeess.SP ·2026-08-28 ·Byunghoo Park, Jayeon Yi, Takyoung Kim, Minje Kim
publishedunusual similarity 0.60
Abstract · Accepted as a challenge paper at the 29th International Conference on Digital Audio Effects (DAFx), Cambridge, MA, USA, 2026

We describe our submission to Task A of the 1st DAFx parameter estimation challenge. The task is to recover the six physical parameters of a simulated metal-plate reverberator -- its dimensions and material properties -- from a single impulse response (IR). We treat this as a black-box optimization: candidate parameter sets are fed to the simulator and scored by a loss against the target IR. The method has two stages. The first uses CMA-ES, an evolutionary optimizer, to recover five of the six parameters, comparing IRs under an amplitude-normalized loss. Amplitude normalization makes the search robust but discards the cue to the sixth parameter, the plate's surface density; a second stage therefore estimates it alone, with a ternary search on the un-normalized loss. As the choice of loss strongly affects the search, we select it beforehand, and analyze why compression in the common multi-scale spectral loss degrades recovery. Finally, we test our method on a validation set of 50 IRs, discuss a pathological failure mode, and ablate to justify having two different stages instead of a unified CMA-ES search.

0.52

Transformer-Based Plate Parameter Estimation with Differentiable and Particle-Swarm Refinement

eess.AS ·2026-10-20 ·David Marttila, Rodrigo Diaz, Pablo Tablas De Paula, Ilias Ibnyahya, Chin-Yun Yu
publishedcode/data similarity 0.58
Abstract · 3 pages, 1 figure, 2 tables. DAFx26 Parameter Estimation Challenge, Task A. Code: https://github.com/davidmarttila/dafx_challenge

We present two Transformer-based methods for Task A of the 1st DAFx Parameter Estimation Challenge, which requires estimating six effective physical parameters of a synthetic plate-reverb model from its impulse response (IR). Method A1 combines an Audio Spectrogram Transformer encoder and Transformer regressor with differentiable IR refinement. Method A2 uses the same encoder to condition a continuous normalizing flow and refines sampled candidates using particle swarm optimisation (PSO) and gradient polishing. Both methods preserve the absolute IR scale to recover surface density. On a synthetic holdout set of 100 IRs, both refinement procedures reduce waveform and parameter errors by more than three orders of magnitude relative to the unrefined neural outputs. The PSO-based pipeline achieves the lowest errors, indicating near-perfect recovery in this matched synthetic setting.

0.43

iPINN for Broadband CARS Phase Retrieval: A Framework for Function Approximation and Inverse Modeling Problems in Nonlinear Spectroscopy

cs.LG physics.data-an ·2026-09-01 ·Ravi Teja Vulchi, Carl Messerschmidt, Mohammadsadegh Vafaeinezhad, Rajendhar Junjuri, Tobias Meyer-Zedler +2 more
benchmark similarity 0.52
Abstract

Phase retrieval in broadband coherent anti-Stokes Raman spectroscopy (BCARS) is an ill-posed inverse problem. The Raman-like signal is encoded in the imaginary part of the resonant susceptibility, which mixes coherently with a non-resonant background (NRB) that varies across acquisitions. We introduce an inverse physics-informed neural network (iPINN) that predicts Lorentzian peak parameters from raw BCARS spectra and reconstructs the resonant susceptibility through a differentiable analytical forward model. A transformer encoder assigns spectral features to 24 learnable peak slots, and a multi-view consistency loss enforces invariance across NRB pattern, NRB strength, and noise. Unlike direct spectral regression approaches, the method retains accuracy under varying acquisition conditions. On a public benchmark, iPINN achieves the lowest error among the tested baselines (MAE 0.016 vs. next-best 0.046). On 28 zero-shot test spectra acquired across seven solvents and four focal positions, accuracy is depth-invariant in five of seven solvents. These results show that inverse parametric prediction with a differentiable physical decoder supports robust phase retrieval across measurement conditions.

0.26

Simulation-Based Inference for Plate Reverb System Identification

eess.AS cs.LG ·2026-09-28 ·Dylan Sechet, Marc Evrard, Matthieu Kowalski
publishedunusual similarity 0.52
Abstract

We address Task A of the 1st DAFx Parameter Estimation Challenge, which aims to retrieve the physical parameters of a plate model from an impulse response. To do so, we use the Simulation-Based Inference (SBI) framework, in which we train a neural network to estimate a density over plate parameters given an impulse response, using a dataset generated by the simulator. Inference for a new impulse response then requires only a forward pass through the network, without involving the simulator. For each test observation, we fine-tune a specific network: additional simulation rounds are performed by sampling parameters from the current estimated distribution, simulating the corresponding impulse responses, and fine-tuning to produce the specialized network.

0.37

Domain-Aware Lightweight Spectral-Grouped Convolutions for Hyperspectral Fish Freshness Classification

eess.IV cs.AIcs.CVeess.SP ·2026-08-12 ·Kazi Nabiul Alam, Pooneh Bagheri Zadeh, Akbar Sheikh-Akbari
published similarity 0.49
Abstract · Accepted at BMVC'2026

Hyperspectral imaging (HSI) offers nondestructive assessment of fish freshness by detecting biochemical alterations across spectral bands. However, conventional deep learning approaches do not fully address the particular characteristics of HSI data, such as spectral dominance over spatial textures, ordinal label structure, and a small number of training samples. We propose SGNet (Spectral-Grouped Network), a lightweight architecture that separates spectral and spatial feature extraction using grouped convolutions and a depthwise spatial pathway. A dual attention mechanism that couples channel-wise squeeze-and-excitation with spatial gating adaptively highlights informative features. SGNet achieves 97.8% classification accuracy and 0.64 days mean absolute error (MAE) with just 4.75M parameters when tested on our newly developed 16-day refrigerator-stored salmon fillet dataset. Ablation studies validate the contribution of each component, while comparisons demonstrate a five- to eighteen-fold parameter reduction relative to ResNet-50 and Vision Transformers. Our findings indicate that domain-aware design supports precise, real-time freshness prediction for industrial implementation.

0.27

Resolution Allocation with Learnable Resizing and Spectral Filter Parameterization

cs.LG cs.CV ·2026-10-14 ·Wei Wu, Eric C. Larson
similarity 0.48
Abstract · 5 pages, 3 figures, 2 tables. Submitted to ICASSP 2027

Learnable downsampling and spectral-domain filter parameterizations have each made convolutional networks more flexible, but their interaction has not been systematically examined. We bridge this gap by examining convolutional kernels learned in the spatial and spectral domains, together with learned downsampling ratios under a cropped resizing implementation. We find that spectral and spatial kernels respond differently to learned resolution allocation, with larger gains for the spectral kernel. We observe this consistently on three datasets (EuroSAT, CIFAR-10 and STL-10) and at two model sizes (differences in accuracy gain of +0.013 to +0.028 on held-out test sets). Part of this difference reflects the greater gain of the spectral kernel from retaining more spatial area, but the difference remains positive when total retained area is matched. This pattern is observed across datasets and model sizes, although its magnitude and dependence on the complexity budget vary with model size and the resizing implementation.

0.21

Inverse Synthesis of Shock Time Series from Shock Response Spectra Using Ensembles of Conditional Variational Autoencoders

cs.LG eess.SP ·2026-10-09 ·Adam Watts, Charles Young, Ryan Bowering, Andrew Jeon, Destry Newton
benchmark similarity 0.48
Abstract · 28 pages, 12 figures

The shock response spectrum (SRS) characterizes the peak responses of single-degree-of-freedom systems to transient acceleration. Because the mapping from an acceleration time series (waveform) to its SRS is many-to-one, inverse synthesis seeks candidate waveforms consistent with a prescribed spectrum. We extend an earlier conditional variational autoencoder (CVAE) framework with a recurrent decoder that predicts multiscale wavelet coefficients and reconstructs waveforms through an inverse discrete wavelet transform. Individual models exhibit limited variability under latent sampling, motivating an ensemble of independently trained models spanning different mother wavelets and decomposition levels. Each member produces a separate candidate waveform for the same target SRS. Evaluation on four held-out benchmark datasets shows lower mean and median spectral errors for the illustrated wavelet model than for the earlier direct time-domain CVAE and a sum-of-decayed-sinusoids (SDS) baseline. A conditioning study examines frequency-grid and encoding choices. Comparisons with published inverse-SRS methods demonstrate superior performance across four holdout benchmark datasets (two operational shock datasets, one earthquake dataset, and one synthetic shock dataset) and competitive performance on synthetic targets reported by Brake. Single-model inference requires approximately 0.1-0.6 ms per waveform during batched inference compared with 5-8 s for SDS, excluding offline training. This low inference cost enables rapid generation of distinct SRS-compatible candidate waveforms across the ensemble, although their physical suitability requires assessment beyond spectral agreement.

0.29