CS Paper Radar

Direct Optimization of a 3D Finite-Source Reflector via Neural-Network Parameterization

Roel Hacking, Lisa Kusch, Martijn Anthonissen, Wilbert IJzerman

cs.LG physics.optics ·submitted 2026-09-01 08:24 UTC · v1
theory

Abstract

We present a direct optimization method for three-dimensional freeform reflectors that transform the light of a finite-étendue source into a prescribed far-field angular intensity distribution. The reflector profile is represented by a small neural network (a multilayer perceptron), which is trained end-to-end through a differentiable ray-tracing objective. We furthermore parameterize the emission directions in gnomonic coordinates, and show how we use this to ensure that every emitted ray intersects the reflector. At each iteration, the network is converted to a bicubic spline representation for ray-tracing efficiency, and intersections with this smooth surface are solved by a damped Newton solve, with gradients computed via the implicit function theorem. The traced output distribution is compared with the desired target on a 'soft' histogram, under an $H^{-1}$-type spectral weighting that emphasizes long-range transport of flux to improve convergence. Optimization is performed using a BFGS method with self-scaled Broyden updates and a plateau-perturbation rule to prevent stalling. The method converges reliably within seconds on a single GPU for all examples tested.

Comment
16 pages, 4 figures, 2 tables. Submitted to Journal of the Optical Society of America A

Closest papers

Nearest neighbours by meaning across the whole index.

VisibilitySplat: Ray-Traced Occlusion for Relighting with 3D Gaussian Splatting

cs.CV cs.GR ·2026-10-14 ·Sven Kluge, Oliver Staadt
published similarity 0.57
Abstract · 10 pages, 5 figures, 3 tables. Published at WSCG 2026

We address inverse rendering with 3D Gaussian Splatting (3DGS) by introducing explicit visibility modeling for relighting as well as material and light decomposition. Our approach augments the standard rasterized 3DGS pipeline with a sparse visibility oracle that estimates transmittance-weighted occlusion for Gaussian primitives from sampled lighting directions. This oracle is implemented using a point-based ray tracer accelerated by a bounding volume hierarchy (BVH) and queried sparsely within the inverse-rendering objectives, while the original 3DGS loop is retained for training efficiency, interactive visualization, and tooling compatibility. Shading follows a physically based rendering (PBR) formulation with a principled microfacet bidirectional reflectance distribution function (BRDF) and low-resolution high-dynamic-range (HDR) environment maps. We evaluate our method on the TensoIR synthetic dataset against baselines based on neural radiance fields (NeRFs), tensor representations, and 3DGS. The results show competitive performance and improvements over several earlier baselines for novel-view synthesis (NVS), albedo reconstruction, and relighting. Ablations indicate that explicit visibility modeling is an important contributor to relighting and material-illumination disentanglement, while pure PBR supervision can favor appearance fitting in NVS. Overall, the findings suggest that sparse, point-based visibility queries effectively complement rasterized splatting for inverse rendering while preserving the practical advantages of the 3DGS ecosystem.

0.21

Real-time Rendering of Pre-integrated Neural Emitters

cs.GR ·2026-10-05 ·Arno Coomans, Floor Verhoeven, Edoardo A. Dominici, Markus Steinberger
hot direction similarity 0.56
Abstract

Direct illumination from non-trivial emitters with occluding housing, high-polygon emissive meshes, spatially varying emission, or deformable assemblies is a persistent bottleneck in real-time rendering. Current real-time solutions either rely on simplified analytical representations or fall back to runtime sampling. Analytical methods are restricted to simple emitter geometry, pure sampling-based estimators need high sampling budgets to be noise-free, and proxy representations still require runtime integration over outgoing radiance around the emitter. We present Neural Emission Fields (NEF), a representation that eliminates runtime integration by precomputing the illumination in the volume around the emitter. This neural field is parameterized by position, normal, view direction, and material parameters. Using a two-headed diffuse/glossy architecture, it yields noise-free unoccluded direct illumination from a single network evaluation per shading point. Because training is performed in the emitter's local frame, a trained NEF acts as a portable lighting asset reusable across scenes under rigid transforms. Internal interreflections, self-occlusion, spatially varying emission, and deformations are absorbed into the learned representation at zero additional runtime cost.

0.30

Geometry Regularization for Vanilla NeRF via Self-Supervised Cross-Ray Consistency

cs.CV cs.GR ·2026-10-20 ·Zongji Wang
similarity 0.54
Abstract

Neural Radiance Fields (NeRF) achieve high-quality novel-view synthesis by representing a scene as a continuous volumetric radiance field. However, the geometry encoded by the density field of vanilla NeRF can be noisy and inaccurate, since different combinations of shape and radiance may explain the same input images. To reduce this ambiguity, we augment vanilla NeRF with a geometry-optimization branch based on self-supervised cross-ray consistency. Specifically, this branch samples candidate surface points from the density field, generates virtual rays that intersect at each point from different directions, and renders their appearance using the NeRF network. Based on the visibility-weighted color consistency across these rays, we constrain the implicit geometry. We further regularize the implicit geometry by penalizing opacity at candidates with inconsistent appearance predictions and encouraging local normal smoothness. These geometric constraints are derived from the NeRF predictions and require no ground-truth depth or surface-normal supervision. Experiments on eight Replica scenes show that the proposed method reduces the mean Chamfer distance by 30.8% compared with vanilla NeRF.

0.16

Physics-Informed Neural Networks for Fast Multilayer Spectral Inversion of Hα 6562.8 A and Ca II 8542.1 A Spectra

cs.AI astro-ph.SRastro-ph.IMcs.LG ·2026-09-16 ·Ziyang Zhang, Qin Li, Vasyl B. Yurchyshyn, Kangwoo Yi, Haimin Wang +2 more
similarity 0.53
Abstract

Strong chromospheric absorption lines such as H$α$ 6562.8 A and Ca II 8542.1 A provide vital diagnostics of plasma dynamics and thermal structure in the solar chromosphere. Multilayer spectral inversion (MLSI) offers a physically interpretable framework for modeling these lines using a finite number of radiative-transfer layers, but conventional MLSI relies on pixel-by-pixel nonlinear least-squares fitting, making it computationally expensive for large imaging spectroscopic data sets. Here, we introduce a physics-informed neural-network (PINN) framework to accelerate MLSI while preserving its analytic radiative-transfer formulation. The network predicts MLSI parameters directly from observed line profiles and passes them through a differentiable MLSI forward model to synthesize spectra. Training follows a two-stage approach: an initial stage optimized solely via spectral reconstruction loss, followed by fine-tuning that combines spectral consistency with parameter-space supervision from conventional MLSI results on a single reference image. This strategy eliminates the need for large precomputed training sets while maintaining physical interpretability. Applied to Fast Imaging Solar Spectrograph (FISS) observations from the Goode Solar Telescope (GST) targeting both quiet-Sun and active-region regions, MLSI-PINN parameter maps reproduce the primary spatial structures of direct inversions, achieving an arithmetic mean pixel-wise Pearson correlation coefficient of 0.933 across all evaluated parameters. The reconstructed spectra closely match both observed profiles and conventional MLSI fits. Post-training, MLSI-PINN processes a raster in approximately 5-15 seconds compared to 3-5 minutes for conventional MLSI, delivering an inference speedup of about 12-60 times without substantial loss in reconstruction quality, enabling efficient MLSI analysis on large chromospheric data sets.

0.29

Bringing Environmental Enhancement Back to Its Physical Essence via Specular Reflecting Surfaces

cs.IT ·2026-08-15 ·Qingxiao Huang, Qianyao Ren, Yiqin Deng, Jun Huang, Yang Kun +1 more
similarity 0.53
Abstract

Intelligent control of wireless propagation environments is crucial for future network capacity and reliability. Unlike circuit-controlled reconfigurable intelligent surfaces (RIS), mechanically actuated specular reflecting surfaces (SRS) offer a simpler and potentially more cost-effective alternative. In this paper, based on the tractable ray-based cascaded channel model with power-projection correction, we investigate the fundamental operational behaviors of an ideal SRS in free space. Specifically, in the angle-aligned near field, edge reflections cause non-constructive combining, resulting in a damped oscillatory convergence of the gain to an aperture-independent constant. We further obtain the far-field behavior, unbounded-aperture asymptotics, an optimal aperture size and reflection angle, and a gain-based near/far-field boundary. For misalignment, we provide accurate approximations for small and large apertures via center-point and stationary-point analyses. We also define the SRS beam pattern, derive analytical 3-dB beamwidths, and quantify the effective region where a main lobe exists. Finally, we derive a closed-form achievable-rate for an SRS-aided communication system. Numerical results validate the proposed expressions, reveal distinct near-/far-field behaviors of specular reflection, and show that SRS can outperform RIS in the far field due to continuous aperture and angular-resolution control and stronger power projection.

0.04

Physics-Unrolled Neural Operator for Accelerating High-Fidelity Wireless Ray Tracing

cs.LG cs.AI ·2026-08-19 ·Rafid Umayer Murshed, Saif Ur Rahman, Mingyue Tang, Elahe Soltanaghai
top venuetheoryhot direction similarity 0.53
Abstract · Accepted at NeurIPS 2026 (camera-ready version). 42 pages, 8 figures, 14 tables

Site-specific wireless design relies on ray tracing to predict how signal strength varies across a floorplan, but a converged indoor radio map takes tens of seconds to simulate and planning a single building requires thousands of them. A learned surrogate can remove most of that cost, yet training one runs into a second problem: high-fidelity labels are exactly what is too expensive to produce at scale, so the affordable labels come from finite-ray simulations that carry residual Monte Carlo noise. We address this with RayNO, a physics-unrolled neural operator that reconstructs the converged output of a ray tracer from one cheap low-fidelity run and scene priors. Rather than treating a radio map as a generic image, RayNO refines the field through three stages matched to reflection, diffraction, and scattering, each supervised by a label of matching physical complexity. We prove that when the label error is conditionally unbiased the learned operator can end up closer to the high-fidelity reference than the labels it was trained on, and we verify that condition directly in the simulator using repeated independent ray seeds. Across diverse floorplans, RayNO outperforms image-to-image baselines, wireless learning models, monolithic neural operators, and classical multi-fidelity regression on both image-quality and wireless deployment metrics, while reducing the cost of a high-fidelity map from roughly 28 s to 0.11 s.

0.51

artist: A Python package for differentiable ray tracing and gradient-based optimization of solar tower power plant operation

cs.LG ·2026-11-16 ·Marlene Busch, Marie Weiel, Kaleb Phipps, Daniel Maldonado Quinto, Max Pargmann +2 more
code/data similarity 0.53
Abstract · 14 pages, 4 figures, abridged abstract, submitted to Machine Learning: Engineering (IOP Publishing)

Solar tower power plants provide dispatchable, renewable energy by concentrating sunlight with thousands of mirrors, called heliostats, onto a central receiver. Efficient operation requires accurate modeling of the optical path from each heliostat to the receiver and compensation for manufacturing imperfections, kinematic misalignment, and material degradation that distort the flux distribution. Conventional ray tracers predict the flux from an assumed plant model but are limited to forward simulation. They cannot recover unknown plant parameters from measured flux nor directly optimize plant operation. We present artist, an open-source, FAIR4RS-compliant Python package implementing a fully differentiable digital twin of solar tower power plants. By making the optical pipeline, comprising heliostat surface representation, kinematics, blocking, and ray tracing, end to end differentiable, artist turns the digital twin from a passive forward model into an active physics-based tool for inverse modeling and data-driven optimization. The resulting gradient-based framework unifies tasks usually handled by separate solutions, such as reconstructing heliostat surfaces and kinematics from operational flux images without costly deflectometry, predicting irradiance at the receiver, and optimizing aim points to realize a desired receiver flux density distribution. Built on PyTorch, artist scales to real plants through GPU acceleration, a structure-of-arrays memory layout, and nested data parallelism. It interfaces with open data sources such as the PAINT database. We describe the software architecture, physical models, and optimization framework, and demonstrate the workflow on representative tasks. By integrating modeling, prediction, and optimization into a single open, interpretable package, artist provides a principled foundation for data-driven research toward autonomous solar tower operation.

0.41

Learning the Missing Derivative: Neural Multiple-Scattering Operators for Inverse Volume Rendering

cs.CV ·2026-11-12 ·Sipeng Chen, Shibo Li
hot direction similarity 0.53
Abstract · 22 pages, 11 figures, 18 tables

Reconstructing optically thick media from photographs requires modeling multiple scattering and its response to changes in extinction. Frozen-source tomography discards this derivative; differentiable path tracing estimates it through expensive, noisy sampling. We instead predict the multiple-scattering field with a neural operator and differentiate through it during inverse rendering, while computing transmittance and single scattering directly. A further challenge arises during optimization: an operator that predicts the field accurately on held-out media can still produce poor derivatives at the density states visited by the optimizer. We address this by fine-tuning on states generated during inversions driven by the operator, using Monte Carlo scattering-field supervision. On held-out optically thick clouds, our method improves relighting over frozen-source tomography at equal time and outperforms differentiable path tracing given substantially more time. Training on inversion trajectories also improves derivative alignment at visited states and reduces optimization drift.

0.30