CS Paper Radar

Accurate Reconstruction of Gas Turbine Blade Geometry Using 3D/2D Rigid Registration and CT View Optimization

Hristo Valtchanov, Nicolas Piché, Vladimir Brailovski, Justin Byers, Catherine Désrosiers, François Guibault

cs.CV ·submitted 2026-09-01 15:06 UTC · v1
publishedunusual

Abstract

Non-destructive X-ray and computed tomography (CT) testing are essential for ensuring the dimensional accuracy of manufactured components with complex internal structures, such as the cooling channels in gas turbine blades, which directly affect thermal performance and service life. This study presents a multipart 3D-2D rigid registration approach for aligning CAD models with X-ray projections as an alternative to CT reconstruction for part inspection and measurement. A greedy registration algorithm sequentially aligns the blade's exterior before registering its internal components by maximizing the mutual information between simulated and acquired X-ray images. This stepwise approach reduces problem complexity and improves alignment accuracy. View angles are optimized using a greedy method that iteratively selects angles to minimize dimensional measurement errors. The results indicate that a small number of oblique views provides the best accuracy, although a broad range of angles yields acceptable results. The method achieves subpixel registration accuracy, with errors below one-fifth of the magnified detector-pixel pitch. Image noise and defects reduce registration precision, but direct registration in projection space mitigates these effects compared with CT reconstruction. Appropriate view selection can therefore preserve acceptable subpixel accuracy in the presence of image noise and defects.

Comment
conference proceedings International Conference on Computed Tomography (iCT) 2025, 8 pages, 6 figures
DOI
10.58286/30748

Closest papers

Nearest neighbours by meaning across the whole index.

Task-driven sparse-view planar X-ray computed tomography for axial metrology

eess.IV cs.CV ·2026-11-01 ·Yibin Tian, Shuming Yang, Wolfgang Heidrich
similarity 0.61
Abstract

Computational imaging can reduce the acquisition burden when the system is designed around task-relevant information rather than complete image recovery. We investigate this framework for sparse-view planar X-ray tomography (XCT) of layered objects, using measurement of the axial termination gap (ATG) of back-drilled printed-circuit-board (PCB) vias as a representative task. Instead of using 3D reconstruction, the proposed method estimates ATG directly from polychromatic projection data through a physics-based sensitivity model. A gated hierarchical estimator first fits ATG together with radiometric perturbations and selectively introduces global geometry and specimen-warp models only when a reduced chi-squared adequacy test and Bayesian information criterion justify the added degrees of freedom. The same low-dimensional perturbation model is incorporated into marginalized Fisher-information analyses, yielding task-specific conditional and calibration-aware Cram'er-Rao bounds. Numerical experiments show that, under a fixed total photon budget, task-driven metrology changes little over 12-64 views, while reconstruction-driven metrology is strongly view-dependent with much larger errors. The direct estimator also follows the expected photon-limited scaling. These results demonstrate a computational sensing strategy in which XCT acquisition, physical modeling, and inference are evaluated according to the quantitative information required by the task rather than for general-purpose volumetric image fidelity.

0.25

LINGO: Latent Initialization and Gradient Optimization for Sparse-view X-ray Novel View Synthesis and CT Reconstruction with 3D Gaussian Splatting

cs.CV cs.GR ·2026-09-19 ·Lifeng Xing, Dequan Jin, Kunpeng Bu, Peigeng He, Shihui Ying
similarity 0.57
Abstract

In novel view synthesis and Computed Tomography (CT) reconstruction with sparse-view X-ray imaging, insufficient angular coverage leads to structural ambiguity and accumulated noise. Integrating 3D Gaussian Splatting (3DGS) with X-ray absorption physics can achieve promising results, but it suffers from noisy initialization, positional insensitivity, and weak gradients in low-density regions. In this paper, we propose a unified Latent Initialization and Gradient Optimization (LINGO) framework to address these issues. LINGO combines latent mask-space initialization with dynamic gradient optimization to improve point cloud structural completeness while accelerating training. It constructs voxel-level 3D filters from X-ray masks to robustly suppress background noise and provide reliable geometric priors. By employing an adaptive voxel scaling strategy and dynamically scaling loss, LINGO can adjust spatial resolution and explicitly amplify gradients in low-density structures. To evaluate the quality of initialization, we introduce the Initialization Point Cloud Structural Deviation (IPSD) metric. Experiments on the X3D dataset indicate that for the novel view synthesis task, LINGO improves the Peak Signal-to-Noise Ratio (PSNR) and Structural Similarity Index (SSIM) by an average of 0.72 and 0.0039, respectively, over baselines under identical sparse-view settings, achieving comparable reconstruction quality within 5k steps to state-of-the-art models typically trained with 30k iterations. For the CT reconstruction task, LINGO also demonstrates consistent improvements, with average PSNR and SSIM gains of 0.36 and 0.0134. These results highlight LINGO's effectiveness in both accelerating training and enhancing reconstruction quality across different sparse-view imaging scenarios.

0.37

Shape-guided Gaussian Splatting for Sparse-View X-ray 3D Reconstruction

cs.CV ·2026-09-09 ·Pranav Poudel, Florence Dell'Aniello Picard, Nairouz Shehata, Frédéric Lavoie, Herve Lombaert
publishedcode/data similarity 0.55
Abstract · Accepted at: Off-Grid: 1st Workshop on Continuous Representations and Grid-Free Methods in Medical Imaging, MICCAI 2026

Sparse-view X-ray 3D reconstruction is essential for reducing radiation exposure, but recovering a density field from a handful of X-ray projections is severely ill-posed. Recently, 3D Gaussian Splatting has achieved state-of-the-art performance in sparse-view reconstruction by representing the volume using explicit, optimized primitives, but it requires dozens of projected views. With fewer views, reconstruction quality degrades severely since the explicit primitives are optimized freely without any anatomical information. Anatomical structures, in contrast, share similar geometry and density across a population. Their variations are bounded within a limited range that statistical shape models can capture. This paper proposes a shape-guided Gaussian splatting framework for sparse-view X-ray 3D reconstructions. Our contribution lies in driving Gaussian positions toward anatomically valid configurations, alongside atlas-based density regularization. Our method ensures anatomically consistent reconstruction and improves PSNR by 2.83 dB over a state-of-the-art Gaussian splatting baseline with as few as 5 views. Code Available: https://github.com/polyshape-lab/ShapeGuidedGaussian

0.46

Geometry-Constrained Bidirectional Point Cloud Registration for Thin, Sheet-Like Heritage Artifacts

cs.CV ·2026-10-06 ·Yuezhe Zhang, Lei Wei, Jingnan Du, Shuai Wan
publishedcode/data similarity 0.55
Abstract · 26 pages, 8 figures. Accepted for publication in ACM Journal on Computing and Cultural Heritage

Non-contact three-dimensional reconstruction of thin, sheet-like heritage artifacts poses significant geometric and registration challenges. Due to their fragility, these artifacts cannot be suspended or equipped with artificial markers, necessitating independent acquisition of their front and back surfaces. Subsequent registration proves difficult due to the limited number of shared geometric features and the scarcity of explicit physical constraints, which may result in rotational ambiguity, instability, and structural collapse during iterative optimization. To address these challenges, we propose a geometry-constrained bidirectional point cloud registration method specifically tailored for thin, sheet-like heritage artifacts. The method integrates semantic-guided preprocessing, Principal Component Analysis (PCA)-based geometric normalization, and a thickness-aware registration strategy. The estimated physical thickness is incorporated as a geometric constraint to preserve structural integrity during registration. Rotational ambiguity is resolved by evaluating a finite set of global rotation hypotheses, each refined using the point-to-plane Iterative Closest Point (ICP) algorithm, with the optimal transformation selected via a geometry-aware fitness criterion consistent with the thickness scale. Experimental results show that the proposed method achieves competitive or improved performance in most cases, particularly in projected area consistency and physically plausible front-back alignment. In addition, the thickness-aware constraint and rotation hypothesis evaluation reduce the risk of degenerate configurations in which the two surfaces are incorrectly flipped while still yielding deceptively acceptable numerical scores, supporting reliable non-contact digitization of delicate and thin heritage artifacts. Implementation details are available at https://zyz-nwpu.github.io/GCBPCR/.

0.44

X-Splat: Unified Gaussian Splatting for Joint RGB and X-ray 3D Reconstruction

cs.CV cs.GR ·2026-10-16 ·Wangze Xu, Chu Zhou, Mae Yamaguchi, Linrui Dai, I-Chao Shen +2 more
publishedcode/data similarity 0.54
Abstract · SIGGRAPH Asia 2026 Conference Papers. 19 pages (12 main paper + 7 supplementary), 13 figures. Project page: https://zezeaaa.github.io/X-Spla…

Jointly reconstructing RGB and X-ray provides new insights by connecting external appearance with internal structure, enabling a more complete understanding of real-world objects than single modality. Yet existing methods train separate models per modality and suffer from redundant geometry, alignment artifacts, and loose coupling that limits cross-modal insight discovery. We propose a unified representation in which all Gaussian primitives share a single set of geometric parameters, with only surface-proximal primitives additionally carrying appearance attributes. We perform cross-modal registration through clean multi-view stereo and X-ray geometric proxies instead of aligning two sets of optimized Gaussians, improving alignment stability. We then jointly optimize the unified representation via supervision from both modalities, complemented by a surface-depth consistency loss derived from X-ray geometry to guide RGB reconstruction. Experiments on the InsideOut dataset and our Flower & Insect dataset show that our framework achieves more robust cross-modal alignment, higher RGB rendering quality without compromising X-ray reconstruction, and a more compact representation than maintaining two independent geometries.

0.36

XPos3R: Cross-Modal Transformer for Intraoperative 2D/3D Registration

eess.IV ·2026-09-09 ·Shiyan Su, Ruyi Zha, Hongdong Li, Xuelian Cheng, Zongyuan Ge
top venue similarity 0.54
Abstract · Accepted to ECCV 2026

Intraoperative 2D/3D registration, which aligns live X-ray images with preoperative volumes, is essential for image-guided interventions. Previous regression-based methods suffer from limited generalization, thus requiring time-consuming patient-specific retraining. Inspired by recent geometry foundation models such as DUSt3R, we propose XPos3R, a generalizable pose regression method that eliminates preoperative preparation. Unlike existing geometry models designed for homogeneous inputs, XPos3R extends this paradigm to multi-modal inputs, namely 2D X-rays and 3D volumes. Specifically, we introduce an asymmetric encoder-decoder architecture that improves cross-modal feature alignment while maintaining computational efficiency. To scale training under limited medical data, we adopt an anatomy-specific data curation strategy and construct million-scale synthetic datasets. Evaluated on real-world benchmarks, a single pretrained XPos3R surpasses patient-specific methods in both accuracy and robustness. With test-time optimization completed in seconds, it further reduces the 3D error to <4 mm and the reprojection error to <1 mm. The strong generalization, accuracy, and efficiency of XPos3R highlight its clinical potential, while its asymmetric framework may inspire broader cross-modal vision geometry tasks.

0.47

PPCAR-Net: Projection-Refined Parametric 3D Coronary Artery Reconstruction from Sparse X-ray Angiographic Views

cs.CV ·2026-10-07 ·Yu Ren, Hwee Kuan Lee, Tat-Jen Cham, Jonathan Yap, Khung Keong Yeo
code/data similarity 0.53
Abstract · 22 pages, 5 figures, 10 tables, including references and appendix. Code and pretrained models: https://github.com/G2304138H/PPCAR-Net . Proj…

Sparse-view 3D coronary reconstruction commonly relies on cross-view correspondence and triangulation, which are vulnerable to vessel overlap and foreshortening, or on volumetric prediction followed by vascular-graph extraction, which does not directly provide centrelines and radii. We introduce PPCAR-Net, a projection-refined parametric coronary artery reconstruction network that directly predicts a branch-structured centreline-and-radius representation without explicit point matching, triangulation, or an intermediate volume. Given a variable number of segmented views, a coarse predictor combines frozen VGGT features with learned branch queries to estimate branch presence, B-spline centreline trajectories, and dense radius profiles. Projection-guided geometry and radius refiners then sample local evidence from the input views and apply residual corrections learned with 3D supervision. We evaluate representation fidelity and sparse-view reconstruction quantitatively and qualitatively. On simulated angiographic masks generated from CT-derived coronary anatomy, PPCAR-Net produces better connected artery reconstructions and achieves strong centreline accuracy, particularly for RCA, while maintaining competitive volumetric overlap. Coarse-to-fine inference takes 121 ms, enabling real-time reconstruction.

0.29

Adaptive Depth-Map-Guided Bundle Adjustment for Correspondence-Free Multi-View Point Cloud Registration

cs.RO ·2026-09-01 ·Yiran Zhou, Yingyu Wang, Shoudong Huang, Liang Zhao
code/datahot direction similarity 0.53
Abstract · 10 pages, 5 figures

Robotic processing of irregular steel scrap requires dense 3-D measurement to replace manual visual assessment in hazardous cutting workcells. The reconstructed map is used to estimate piece dimensions, boundary geometry, feasible preheating and cutting regions, and collision-aware torch paths. The reconstruction errors therefore propagate directly to downstream measurement and planning. Existing multi-view registration methods commonly rely on feature extraction and data association to establish correspondences between views. In workcells with smooth metallic surfaces, repeated structures, occlusions, and partial overlaps, however, wrong correspondences may be established, leading to inaccurate pose estimation and distorted reconstruction. This paper presents an adaptive layered depth-map-guided bundle adjustment framework for correspondence-free multi-view point cloud registration. The scene is represented by a global 2.5-D grid, where each cell can adaptively maintain multiple depth hypotheses. Raw depth observations are directly projected into the global map to form depth constraints without explicit feature correspondences. At grid cells where multiple surfaces produce conflicting depths, a softmax-based layer assignment links each observation to compatible depth hypotheses. The resulting nonlinear least-squares formulation jointly refines sensor poses and the layered depth map, with correspondences implicitly induced by the depth-map representation and projection model. Experiments on self-collected industrial datasets show that the proposed method achieves consistently competitive reconstruction accuracy while maintaining robustness and low computational cost in challenging industrial scenarios. We release the open-source code implementation at: https://github.com/YiranZhou-Robotics/ADM-BA.git

0.42