CS Paper Radar

Coupling-Aware Aggregation of Multi-Zone HVAC Loads under Uncertainty: A Two-level Framework

Jingguan Liu, Han Jiang, Xiaomeng Ai, Shengshi Wang, Xizhen Xue, Shichang Cui, Jinming Hou, Jiakun Fang, Jinyu Wen

eess.SY ·submitted 2026-09-03 01:24 UTC · v1
top venuehighly cited

Abstract

Aggregating building heating, ventilation, and air-conditioning (HVAC) loads unlocks substantial demand-side flexibility for power systems. Yet multi-zone coupling creates intricate interdependencies and uncertainty propagation, complicating the quantification of aggregate flexibility. To address this issue, this paper proposes a coupling-aware two-level aggregation framework. At the building level, tailored Gaussian elimination and coordinate transformation techniques are employed to recast the high-dimensional thermal dynamics as an equivalent lower-dimensional analytical expression. This expression streamlines the subsequent aggregator-level stage by (i) clarifying the propagation of zone-level uncertainties to the building-level interface, (ii) decoupling intra-building multi-zone coupling from inter-building aggregation, and (iii) providing full-dimensional building-level flexibility sets that enable tractable reformulation. At the aggregator level, existing geometric aggregation approaches are generalized by a newly developed matrix-transformation technique. This technique effectively constructs inner approximations between polytopes of different dimensions, producing closed-form images of high-dimensional multi-zone HVAC flexibility in power subspace. The resulting inner approximation is then recast as a customized separatable linear program that efficiently determines the optimal aggregate parameters. Case studies validate the effectiveness of our framework, highlighting its accuracy, reliability, and scalability.

Comment
Published in: IEEE Transactions on Smart Grid (vol. 17, no. 3, pp. 2077-2091, 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Continuous-Time Aggregation of Massive Flexible HVAC Loads Considering Uncertainty for Reserve Provision in Power System Dispatch

eess.SY ·2026-09-02 ·Jingguan Liu, Xiaomeng Ai, Jiakun Fang, Shichang Cui, Shengshi Wang +2 more
top venuehot directionhighly cited similarity 0.71
Abstract · Published in: IEEE Transactions on Smart Grid (vol. 15, no. 5, pp. 4835-4849, 2024)

Heating, ventilation, and air conditioning (HVAC) loads, with their rapid response capabilities, can provide considerable intra-hour flexibility on the demand side for reserve provision in order to follow the fast variations of renewables. However, scheduling massive HVACs is challenging due to computation complexity and the uncertainty of outdoor temperature. In this paper, we first introduce a novel continuous-time (CT) aggregation model to reveal the potential intra-hour flexibility of HVACs. For accurate aggregation, a new affine transformation is designed to handle the heterogeneity in high-dimensional feasible region. Further, for reliable aggregation in practical environment, the outdoor temperature uncertainty is constructed by distributionally robust chance constrains and integrated into the aggregation model. Secondly, for the tractable calculation of the proposed CT aggregation model, a cascade of tailored reformulation techniques is proposed, including the Bernstein polynomial spline, polytope projection, and linearization transformation. Thirdly, a customized hierarchical dispatch framework is proposed via incorporating the proposed CT aggregation model into reserve provision in power system dispatch, so as to efficiently schedule massive HVACs to cope with the renewable uncertainty. Case studies verify the effectiveness and scalability of the proposed CT aggregation model in aggregation accuracy, intra-hour flexibility utilization, and uncertainty handling.

0.67

Cost-Informed Learning for Aggregating Building HVAC Flexibility

eess.SY ·2026-09-22 ·Jingguan Liu, Cong Chen, Xiaomeng Ai, Jiakun Fang, Jinsong Wang +1 more
benchmark similarity 0.58
Abstract · 11 pages, 14 figures

This paper develops a cost-informed aggregation framework that learns an aggregate flexibility set of building heating, ventilation, and air-conditioning (HVAC) loads to minimize the aggregator's dispatch cost. Existing aggregation methods mainly use volume-oriented objectives and treat flexibility aggregation and downstream utilization as separate stages. Consequently, the resulting aggregate set may fail to preserve the flexibility most valuable for reducing downstream dispatch costs. To address this limitation, we represent aggregate HVAC flexibility using a parameterized storage-form surrogate and jointly learn the surrogate parameters and the inner-approximation objective from downstream dispatch-cost feedback. This cost-informed feedback allocates the surrogate's limited representation capacity to cost-relevant regions of the aggregate flexibility set. To account for electricity-price uncertainty, we formulate a distributionally robust conditional value-at-risk (DR-CVaR) downstream problem that captures both distributional ambiguity and tail risk. For efficient learning, we reformulate the DR-CVaR problem as a convex second-order cone program. We estimate cost gradients using randomized smoothing and a score-function estimator, avoiding differentiation through large-scale building-level optimization problems. Case studies using NYISO price data show that the proposed framework reduces dispatch costs relative to a volume-oriented aggregation benchmark and that suitable risk and ambiguity settings can lower the out-of-sample CVaR of dispatch costs.

0.22

Computationally Transparent Power Flexibility Aggregation via Directional Support Evaluation

eess.SY ·2026-10-21 ·Mingyu Zhai, Liang Du, Yue Chen
similarity 0.53
Abstract · Preprint. Submitted for journal review

The growing penetration of distributed energy resources (DERs) creates new opportunities for improving resource adequacy, operational flexibility, and power-system reliability. However, efficiently characterizing the aggregate flexibility of heterogeneous DER portfolios remains challenging because of high dimensionality, diverse operating dynamics, and spatio-temporal coupling constraints. This paper proposes a computationally transparent framework that formulates aggregate flexibility characterization as a sequence of linear programming (LP)-based directional support evaluations. The framework accommodates heterogeneous DER technologies and configurable device-, feeder-, and portfolio-level constraints. The convex hull of the resulting boundary trajectories provides a feasible inner approximation of the coupled aggregate power flexibility region. Theoretical analysis establishes feasibility and non-overestimation guarantees and characterizes the computational dependence on portfolio size, scheduling horizon, and direction budget. In the small-scale case, the proposed method produces tighter projected regions than box, zonotope, and Chebyshev inner-ball benchmarks and matches a dense directional reference within numerical tolerance using 16--64 construction directions. Large-scale simulations with up to 2000 DERs demonstrate approximately linear empirical runtime scaling with the portfolio size and direction budget over the tested ranges. The results establish a scalable and theoretically grounded approach for aggregate DER flexibility characterization.

0.27

Integrated Heat and Power System Scheduling with Continuous-Time Thermal Dynamics via Bernstein-Galerkin Optimization

eess.SY ·2026-08-18 ·Jie Deng, Zhigang Li, J. H. Zheng, Ye Guo
top venue similarity 0.53
Abstract

Coordinated scheduling of district heating networks (DHNs) and electric power systems can improve operational flexibility and reduce costs by exploiting thermal inertia. Most existing formulations rely on simplified discrete-time DHN models, which may inadequately represent continuous spatiotemporal thermal dynamics and can lead to biased flexibility estimation and suboptimal schedules. In this paper, an integrated heat and power system scheduling framework that explicitly incorporates the continuous-time thermal dynamics of DHNs is proposed. A Bernstein-Galerkin transform method is developed to convert the underlying partial-differential thermal-dynamics constraints into a finite set of algebraic constraints, enabling tractable optimization while retaining dynamic fidelity. The resulting model transforms the original infinite-dimensional variational problem into a finite-dimensional coefficient optimization that can be solved using optimization solvers. Compared with conventional discretization approaches, the proposed method provides a more accurate representation of thermal dynamics and yields schedules with improved economic performance and reliability.

0.57

Adjacent Heat Transfer Effects Can Bias Savings Estimates When Controlling Only Part of a Multi-Zone Building

eess.SY ·2026-11-12 ·Arash J. Khabbazi, Kevin J. Kircher
publishedtheory similarity 0.51
Abstract · 10 pages. Accepted at the 2027 ASHRAE Winter Conference

Field demonstrations of advanced heating, ventilation, and air-conditioning control often operate a few thermal zones within a larger building and report savings for those zones alone. A recent theorem showed that this practice overestimates whole-building savings, because heat drawn from the neighboring zones is paid for by their equipment and is not counted. The error grows with the thermal conductance between the controlled and uncontrolled zones, with how much colder the controlled zones run over the test, and with the price of the heat their neighbors supply. For one controlled zone with one neighbor, a single thermal price, and slowly changing prices, the relative error reduces to the ratio of two conductances, a screening number that can be evaluated from the two conductances before a demonstration begins. This paper tests how far that reduction can be taken. A two-story house with one thermal zone per floor is simulated over a 90-day heating season in West Lafayette, Indiana, with receding-horizon model predictive control on the first floor and setpoint control on the second, under four combinations of electricity tariff (time-of-use or flat) and heating plant (heat pump or electric resistance). The exact correction from the theorem recovers the true savings in every case, and the full theorem, evaluated from the controlled zone's temperatures, the prices, and the building parameters, reproduces the measured relative error in every case. The conductance ratio bounds that error from above in all four cases, tightly under a flat tariff, within 3%, and loosely under a time-of-use tariff, where most of the controller's savings come from shifting load through the thermal mass rather than from lowering the temperature.

0.30

Dimension-Reduced ADP for Real-Time Microgrid Operation with Massive Air-Conditioning Loads under Multiple Uncertainties

eess.SY ·2026-09-02 ·Jingguan Liu, Xiaomeng Ai, Shichang Cui, Jiakun Fang, Jinyu Wen
published similarity 0.50
Abstract · Accepted in Proc. 2026 IEEE PES 18th Asia-Pacific Power and Energy Engineering Conference (APPEEC), Singapore, August 24--27, 2026 (Best Pap…

This paper proposes a dimension-reduced approximate dynamic programming (ADP) method for real-time microgrid operation with massive air-conditioning loads under multiple uncertainties. The operation problem is formulated as a multi-stage Markov decision process, and a post-decision value function is introduced to characterize the impact of current decisions on future operating costs. To address the curse of dimensionality caused by massive air-conditioning loads, a consistency-based value function projection is developed to map the high-dimensional state space at each node into a tractable aggregated state space. Based on the reduced states, piecewise linear approximation is further employed for efficient value function training. Case studies on 33-bus and 123-bus systems show that the proposed method achieves near-optimal operation performance with low computational cost and good scalability under both deterministic and stochastic conditions.

0.48

One Agent per Zone: Decentralised Active Inference under Partial Observability for Multi-Zone HVAC Control on Edge Hardware

cs.MA cs.AI ·2026-10-14 ·Panagiotis Kasnesis, Lazaros Toumanidis, Christos Chatzigeorgiou, Amalia Contiero Syropoulou, Miguel De Prado
published similarity 0.49
Abstract · 9 pages, 3 figures, accepted in European Conference on EDGE AI Technologies and Applications, EEAI 2026, Malta

Multi-zone HVAC control is a shared-resource problem: zones on a floor share one fan and cooling coil, so each zone's demand affects its neighbours and the building's peak power. One controller per zone scales well and isolates faults, but each controller then observes only its own zone, not the shared air loop. In this work, we present a decentralised controller that assigns each zone an independent active-inference agent, which plans by minimising expected free energy and learns its zone dynamics online. The agents exchange no messages, so none depends on peers or a coordinator; each accounts for the unobserved coupling through a latent disturbance and a congestion signal derived from the metered power of the other floors. Fifteen agents are evaluated in EnergyPlus on a Sinergym office building against three rule-based controllers and three MADDPG fleets, one given the same floor meters. On five noisy weather years unseen during training, the fleet attains the lowest mean building peak (88.3 kW, 3 to 17 % below the baselines) and staggers the floor peaks better than any baseline, with a coincidence factor (building peak over the sum of the floor peaks) of 0.929 versus 0.936 to 0.994. Compared with a reactive rule at similar comfort (0.912 versus 0.916), it lowers the sum of monthly peaks, on which demand charges are billed, by 33 kW (4 %) in every year, at the cost of about 10 % more energy. It costs 9% less per year than the proactive rule (at lower comfort) and 1% less than the MADDPG fleet given the same floor meters, in every test year. The whole fleet runs on a single low-cost Raspberry Pi 5, closing the observation-to-action loop over MQTT in 442 ms at p95, far below the 15-minute control step.

0.32

Preference-Oriented Aggregation of Heterogeneous Distributed Energy Resources for Reserve Dispatch

eess.SY ·2026-09-03 ·Jingguan Liu, Xiaomeng Ai, Shichang Cui, Xizhen Xue, Shengshi Wang +3 more
top venuehighly cited similarity 0.48
Abstract · Published in: IEEE Transactions on Smart Grid (vol. 17, no. 2, pp. 1264-1279, 2026)

Aggregating distributed energy resources (DERs) aims to encode their collective flexibility into a single set for efficient grid dispatch. However, existing aggregation methods are overly conservative for heterogeneous DERs due to two main challenges: 1) dimensional heterogeneity, which complicates the combination of flexibilities across different time dimensions, and 2) type heterogeneity, where diverse and irregular DER profiles hinder accurate approximations, resulting in significant flexibility loss. To resolve these challenges, this paper propose a novel preference-oriented aggregation method for reserve dispatch. For dimensional heterogeneity, we extend existing techniques by reformulating the Minkowski sum as a polytope projection problem using a matrix transformation technique. By unifying DERs in a higher-dimensional space and projecting them back into the aggregate feasible region, the proposed technique effectively aggregates dimensionally heterogeneous DERs. For type heterogeneity, we further develop a distributed aggregation-dispatch coordination framework that incorporates reserve dispatch preferences into aggregation. This framework effectively captures the critical, active aggregate flexibility prioritized in optimal reserve dispatch, thereby significantly reducing the flexibility loss when aggregating type-heterogeneous DERs. Numerical tests validate the effectiveness of our method in addressing both heterogeneities and highlight its promising potential for power systems with high reserve requirements.

0.47