CS Paper Radar

Phase-aware Inverse Design for Silicon Photonic Logic Gates

Ary Portes, Narges Dalvand, Felipe M. F. Teixeira, Omar P Vilela Neto, Julian L. Pita Ruiz, Michael Menard, Jhonattan C. Ramirez

eess.SP physics.optics ·submitted 2026-09-04 21:32 UTC · v1

Abstract

Inverse design has emerged as a powerful strategy for realizing compact photonic devices; however, its application to logic operations remains constrained by challenges in physical interpretability, architectural generality, and experimental validation. This work introduces an experimentally validated, unified, and physics-driven inverse design framework that implements all fundamental Boolean logic gates within a single silicon photonic architecture. Devices are fabricated within a 2 x 2 um^2 design region on a silicon-on-insulator platform, representing one of the smallest areas reported for photonic logic elements. By integrating amplitude, phase, and energy conservation into a composite figure of merit, the proposed approach enables direct control over constructive and destructive interference. Consequently, all logic functions, including XOR and three-input NAND/NOR operations, are achieved using a standardized configuration with two logical inputs and a bias port. Experimental results exhibit good agreement with numerical simulations across the C-band, confirming both the predictive accuracy and fabrication robustness of the method. Performance benchmarking reveals competitive contrast ratios compared to previous implementations, while providing a unified and scalable design strategy. These findings establish a physically interpretable and experimentally validated paradigm for inverse-designed photonic logic, advancing the development of compact, integrated optical computing systems.

Comment
19 pages, 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

A Theory of Nested Cascading in Directed Logic

cs.CC physics.opticscs.ET ·2026-10-02 ·Ihar Babushkin, Oliver Melchert, Ayhan Demircan, Uwe Morgner
similarity 0.55
Abstract

In directed logic (DL), electronically controlled optical elements serve as photonic gates. Such electro-optical elements are of mixed nature: they have two inputs--electronic and optical--but only one, optical, output. This makes cascading such gates without repeated conversion between optical and electronic representations cumbersome. This problem can be largely overcome using the nested cascading scheme proposed by Shamir and Hardy [Opt. Express, 17, 150 (2007)]. Although promising as a solution to the cascading problem, the Shamir-Hardy scheme has so far been proved or implemented only for a few simplest cases. Here, we develop a general rigorous theory of nested cascading, valid for an arbitrary number of gates. We propose a variant of the algorithm which easily extendable to large number of gates, and rigorously prove its validity. Furthermore, we analyze how nested cascading scales with the size of the corresponding Boolean formula. We show that good (linear) scalability is guaranteed in many important cases, while the average scaling with respect to the corresponding Boolean formulas is only moderately polynomial, with an exponent of approximately 3/2. Yet, the worst-case scaling remains exponential with respect to more general Boolean circuits allowing sharing and reuse of intermediate results.

0.27

PISim: A Unified Photonic Inference Simulator for Hardware-Aware Cross-Layer Design-Space Exploration

cs.AI physics.optics ·2026-11-12 ·Andreas Falkenberg
similarity 0.54
Abstract · 8 pages, 2 figures

Photonic neural accelerators offer ultra-low latency linear algebra, yet their usable numerical precision, sustainable throughput, and application accuracy remain tightly bounded by surrounding electro-optical interfaces and physical non-idealities. Pre-fabrication design-space exploration (DSE) requires a cross-layer electronic design automation (EDA) framework capable of evaluating disparate optical topologies under identical neural workloads and physical assumptions. We present \textbf{PISim}, a unified Photonic Inference Simulator that couples pretrained deep neural network execution with physics-based models of six accelerator architecture families, six electro-optic modulator technologies, four optical source organizations, and direct or coherent readout schemes. PISim embeds stage-resolved impairment operators---covering control and analog-to-digital quantization, finite extinction ratio, shot noise, correlated relative-intensity noise (RIN), thermal drift, propagation loss, and channel crosstalk---alongside an analytical cycle-level interface timing model to expose electronic-optical bottlenecks. Using simulated MNIST multilayer perceptron (MLP) benchmarks, we demonstrate how PISim identifies optimal precision operating points under multi-impairment stress (peaking at 6 bits for Mach--Zehnder and microring modulators), quantifies a 52.5 percentage-point accuracy gap between VCSEL-array and parallel-fanout laser architectures arising, under the modeled conditions, from power partitioning and correlated source noise, and models interface-limited throughput scaling across emitter-array widths from 32 to 128 channels. This comprehensive framework establishes an extensible, reproducible foundation for accuracy-constrained Pareto optimization prior to photonic tape-out.

0.25

A Time-Encoded Analog Photonic Interposer for Energy-EfficientIntegration of Analog Vision Sensors and Analog Accelerators

cs.AR ·2026-09-02 ·Subhradip Chakraborty, Zihan Yin, Xuming Chen, Chengwei Zhou, Gourav Datta +1 more
similarity 0.51
Abstract

This work introduces a time-encoded analog photonic interposer that enables long-distance, high-fidelity transport of analog signals between spatially separated chiplets. Unlike prior silicon-photonic links limited to digital data, the interposer preserves analog information by converting amplitudes into timing intervals using an analog-to-time converter (ATC), transmitting them over a wavelength-division-multiplexed photonic link, and reconstructing values at the receiver without an explicit high-precision ADC/DAC data-converter pipeline. The link instead embeds an implicit 6-bit time-domain quantization and uses a single wavelength per processing element independent of bit precision. Evaluated in a fully analog vision pipeline with an in-pixel computing (IPC) sensor, it achieves a 2.04x energy--delay product (EDP) improvement over an 8-bit digital electrical baseline on the 560x560 Visual Wake Words dataset, with the advantage widening with link length even against a precision-matched 6-bit baseline. The pipeline holds 89.87% and 86.15% accuracy on ResNet18 and MobileNetV2 for VWW and generalizes across CIFAR-10 and ModelNet40 within 2% of the digital baseline.

0.26

SPARC: Accurate Photonic Matrix Multiplication via Representative Vectors

cs.AI ·2026-11-12 ·Yasuhiro Fujiwara, Tatsuhiro Nakamori, Hideyuki Kawashima
similarity 0.49
Abstract · 11 pages, 5 figures, 3 tables

Photonic neural network accelerators have emerged as a promising solution for reducing the power consumption of deep neural network (DNN) inference by executing matrix multiplication on analog photonic hardware. However, their inference accuracy is limited by low-bit quantization required for photonic processing and by analog photonic noise. This paper proposes an approach for improving inference accuracy by exploiting the high similarity among activation vectors in DNNs. Specifically, our approach constructs a representative vector for each group of similar activation vectors, computes its inner product digitally with high precision, and offloads the residual inner products to the photonic accelerator. Since the activation vectors within each group are highly similar, the residual vectors have much smaller norms, thereby reducing the effects of quantization errors and analog photonic noise. Furthermore, our approach preserves the photonic inner-product computation pipeline, allowing seamless integration into existing and future photonic accelerators without hardware modification. Experimental results on six representative DNN models demonstrate that the proposed approach can improve inference accuracy across diverse network architectures and application domains.

0.26

The Achilles' Heel of Partial Reconfiguration: Optical Side-Channel Leakage on the 7-Series ICAP

cs.CR ·2026-10-01 ·Antonio Saavedra, Jan Caspar Marx, Lars Renkes, Jean-Pierre Seifert
publishedunusual similarity 0.48
Abstract · Accepted for publication in the 29th Euromicro Conference on Digital System Design (DSD 2026)

Major FPGA manufacturers have incorporated bitstream encryption to protect sensitive configuration data. However, for the most widely used FPGA families, multiple attacks against unpatchable protection schemes hard-wired into the devices can bypass or fully break them, making patchable schemes desirable. In this work, we present a proof-of-concept implementation of an AMD-proposed asymmetric key encryption scheme for bitstream protection for 7-Series FPGAs, using partial reconfiguration from the Programmable Logic. We analyze the security implications and hardware overhead of this implementation. We then propose and demonstrate an optical side-channel attack that is able to recover plain-text configuration data during the dynamic reconfiguration process. This attack leverages Photon Emission Microscopy and Electro-Optical Probing to first locate and then contactlessly extract the plain-text data from the ICAP interface, which internally connects the Programmable Logic with the configuration logic. We located the ICAP buses in an AMD XC7A200T device and show that the data on it can be extracted with Electro-Optical Probing. We claim that even advanced encryption schemes utilizing Partial Reconfiguration and custom cryptographic engines are vulnerable to optical attacks, as reconfiguration is only possible via hard-wired, vulnerable configuration interfaces.

0.36

Handling Imperfections in Subcircuit Compilation for Linear Optical Quantum Computing

cs.ET quant-ph ·2026-09-11 ·Tobias Forster, Yannick Stade, Andreas Fyrillas, Jean Senellart, Lukas Burgholzer +1 more
similarity 0.48
Abstract

Linear Optical Quantum Computing (LOQC) is emerging as a promising technology in large-scale quantum computing. Corresponding devices, including linear optical circuits, are rapidly growing in size and fabrication precision. However, even with improved quality, the circuits still exhibit imperfections leading to photon loss or phase noise that vary across the circuit. Already small deficiencies can have a vast impact on both accuracy and efficiency. For computations that do not require the entire linear optical circuit, so-called subcircuits, one can choose where to perform the computation, opening optimization opportunities that are addressed by subcircuit compilation. Current compilers spread the subcircuit's computation across the entire circuit, connecting the same input and output ports, thereby failing to fully exploit the optimization opportunities. However, given the subcircuit's reduced size compared to the entire circuit, one can keep its implementation localized and intentionally route photons to connect good input and output ports. This, however, is a highly non-trivial task, as numerous options must be weighed against one another, and the quality of the solution is influenced by a wide range of hardware parameters. In particular, the reflectivities of imperfect beam splitters can lead to photon losses during routing, which must be traded off against losses at the input and output ports due to imperfect transmission rates. Since current compilers do not account for these effects, we propose the first efficient subcircuit compilation method that optimizes for the coincidence rate, the probability of successfully measuring all desired photons, by handling hardware imperfections. Our evaluations demonstrate significant improvement over existing methods in robustness against phase noise and significantly increased coincidence rates across all benchmarks of up to plus 33.2%.

0.27

VortexChat: An agentic framework for autonomous multi-objective integrated photonic design

cs.AI physics.optics ·2026-08-21 ·Faqian Chong, Yulun Wu, Shilong Li, Andrew Forbes, Hongsheng Chen +1 more
benchmark similarity 0.48
Abstract

The advancement of modern integrated photonics is frequently bottlenecked by device design workflows that rely heavily on manual simulation and expert intuition. While inverse design offers an alternative, it remains constrained by expert supervision and a lack of end-to-end automation. To address these issues, we present VortexChat, an agentic framework for the autonomous, end-to-end inverse design of integrated photonic devices directly from natural language specifications. VortexChat couples a large language model (LLM) decision agent with topology generation, gradient-based refinement, and full-wave electromagnetic simulation. This closed-loop architecture enables the system to iteratively decompose design objectives, orchestrate computational tools, and update strategies based on feedback with minimal human intervention. Constrained by the absolute metrics of the Vortex100 Benchmark, VortexChat autonomously generates devices that strictly meet all predefined performance thresholds without any human-in-the-loop. As an experimental demonstration, we fabricated a broadband terahertz perfect vortex beam multiplexer, autonomously designed by VortexChat, with measurements confirming high-efficiency operation, high mode purity and low inter-channel crosstalk in agreement with full-wave simulations. These results demonstrate that an LLM agent can assume key aspects of expert decision-making in photonic inverse design while maintaining physical fidelity and fabrication feasibility, providing a scalable route towards autonomous design of complex integrated photonic systems.

0.25

Programmable Compute-in-Transit using Integrated Photonics

cs.AR ·2026-08-21 ·Imon Kundu, Livi Hammond, Jamie Todd, Kriti Goel, Peter Simpson +6 more
similarity 0.47
Abstract

Modern hardware designs for AI and cryptography treat data transit and processing separately. At Optalysys we have demonstrated programmable Photonic hardware that computes mathematical functions on data that is in transit, enabling tens of GFLOPs of operations on data links.

0.28